Unresponsive system following update to 10.6.2
Just ran the update to 10.6.2, and it appeared to go off without a hitch. When it rebooted, however, it gets stuck when loading the desktop. The image appears, the icons appear, and then a blank white box with a drop-shadow appears, after which all loading stops. The mouse can still move, however it goex back and forth between pinwheeling and the usual arrow. Is there anything I can do to get it working if I boot from another disk and hop on the terminal, or am I stuck doing an archive and install? In the event of the latter, are there any special issues when downgrading back to Leopard? Been considering it for a while to get iWork running again, and now sounds like as good a time as any if I'm going to have to spend 3 hours reinstalling regardless.
Thanks in advance!
Posted from my iPhone.
Hello Paul:
I suggest you reinstall (using upgrade) OS X 10.6 from your DVD and then update using software update.
Barry
P.S. That should not take anywhere near three hours.
Similar Messages
-
Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support -
Installation Failure: Windows failed to install the following update with error 0x800F0922
Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil -
Macbook Pro Retina display says "No batteries available" after legitimate system software update
Issue Description
On July 26, 2012 I placed an order with Apple store for the 15-inch MacBook Pro with Retina display with the following configuration (Order # W269108641 Serial# C02J52S9DKQ5):
Processor 2.6GHz Quad-core Intel Core i7, Memory 16GB 1600MHz DDR3L SDRAM, Flash Storage 512GB Flash Storage
It was delivered August 8, 2012. It cost me $3,265.16
I have since equipped it with accessories like a wireless apple keyboard ($69), wireless mouse ($69), USB super drive ($79), VGA display adapter ($29), Ethernet Adapter ($29) and the excellent sleeve/pouch from Pack & Smooch GmbH (GBP60))
It's so heavily configured because it’s my main workstation. I additionally bought and installed Parallels 8 so I can run Windows 8 in a Virtual Machine because I have a few things on Windows that I need to be productive. This setup has been a dream machine until a little over a week ago.
In the one year since I bought it, I have had only 2 issues;
• A case of display flickering that resulted after a system software update on August 28, 2013
(Case ID 498560320 - not much help came from Apple Support but fortunately the problem went away a week later after another system software update)
• A case of battery failure that resulted after a system software update on October 11, 2013
(Case ID 516534003 - I have gone through all recommendations from Apple support as I will detail below)
Symptoms after system software update
• Battery Icon on status bar disabled with a message "No batteries available"
• Battery not charging
• LED on the Magsafe power adapter no longer show
• Keyboard backlights no longer show
• Notebook fan loud/noisy and permanently at high speed
• Date and time reset to a date in the past at each restart
• Notebook starts up the moment the Magsafe adapter is connected without waiting for power button to be pressed
• An update for "MacBook Pro Retina Display SMC Update 1.2" keeps appearing in Software Update
Recommendations from Apple Support
• Perform SMC Reset (http://support.apple.com/kb/HT3964)
(Done - no change in status)
• Run Disk Utility
(Done - no errors found)
• Run Apple Hardware test (http://support.apple.com/kb/HT1509)
(Done - no errors found, no change in status)
• Visit Apple Store
(Done - they confirmed no issue with Magsafe adapter. For a fee they are happy to change the battery if confirmed faulty and re-install the OS if the battery is not the issue but am uncertain that the OS re-install will resolve the issue because I have read online about a similar case where a re-install did not resolve the issue)
• Check System Report/Hardware/Power
(Done - Health Information/Cycle count:0, Battery installed: No)
• Perform NVRAM Reset (http://support.apple.com/kb/HT1379?viewlocale=en_US)
(Done - no change in status)
Comments and additional Observations
Please note the following;
• All of the symptoms above appeared after a system software update on October 11, 2013
• This update first appeared on October 10, 2013 but I was too busy to apply it especially because it required a system restart
• The battery was fully charged when I decided to apply the update on October 11 morning after I got to work
• Normally on full charge, the battery will typically deliver 3 - 4 hours depending on usage and up to 6 hours when idle
• The said update was not interrupted or anything of the sort
• On the day the symptoms were first observed when I first logged the case with apple, the system ran on battery while it performed the Apple Hardware Test while I was driving to the Apple support store on my way home even though the status bar was indicating "No battery available"
I make the following deductions solely based on my observations
• An apple authorized system software update broke the system
• The nature of the failure is communication related - the battery charging circuit and related systems are not getting the necessary instructions to function as they should (It's a known fact that rechargeable batteries do NOT die instantaneously, the total hours they run on full charge will gradually reduce over time as they degrade on use)
• It’s possible the update is not being applied correctly because the item “MacBook Pro Retina Display SMC Update 1.2” is still in Software update after subsequent attempts to apply it
• The high fan speed is nothing to do with high temperature or high processor load, according to the Activity Monitor utility the highest CPU utilization 1.9 – 4.7% is by kernel_task (PID 0) followed by activitymonitord at 1.8 – 2.2% (PID 481)
• The symptoms match what an SMC reset should resolve according to Apple documentation
• This is a known problem within Apple based on the documentation provided and the numerous similar cases reported online
Summary;
The system is running OS X 10.8.5
I have provided this detailed documentation in the hope that someone who understands this system can say exactly what is going on. It's meant to be a dream machine but now you can hear the fan from across a large room, the battery doesn't charge and is in fact not recognized so I lose data if the Magsafe adapter gets unplugged, and I have to reset the system date each time I restart the notebook.
I've used this notebook with utmost care for a little more than a year, this investment of over $3,500 could have bought 3 high end notebooks from DELL or HP but I chose Apple.
I have suffered untold loss in productivity in the last 10 days since this issue occurred, I respectfully request Apple to fix my notebook.Issue Description
On July 26, 2012 I placed an order with Apple store for the 15-inch MacBook Pro with Retina display with the following configuration (Order # W269108641 Serial# C02J52S9DKQ5):
Processor 2.6GHz Quad-core Intel Core i7, Memory 16GB 1600MHz DDR3L SDRAM, Flash Storage 512GB Flash Storage
It was delivered August 8, 2012. It cost me $3,265.16
I have since equipped it with accessories like a wireless apple keyboard ($69), wireless mouse ($69), USB super drive ($79), VGA display adapter ($29), Ethernet Adapter ($29) and the excellent sleeve/pouch from Pack & Smooch GmbH (GBP60))
It's so heavily configured because it’s my main workstation. I additionally bought and installed Parallels 8 so I can run Windows 8 in a Virtual Machine because I have a few things on Windows that I need to be productive. This setup has been a dream machine until a little over a week ago.
In the one year since I bought it, I have had only 2 issues;
• A case of display flickering that resulted after a system software update on August 28, 2013
(Case ID 498560320 - not much help came from Apple Support but fortunately the problem went away a week later after another system software update)
• A case of battery failure that resulted after a system software update on October 11, 2013
(Case ID 516534003 - I have gone through all recommendations from Apple support as I will detail below)
Symptoms after system software update
• Battery Icon on status bar disabled with a message "No batteries available"
• Battery not charging
• LED on the Magsafe power adapter no longer show
• Keyboard backlights no longer show
• Notebook fan loud/noisy and permanently at high speed
• Date and time reset to a date in the past at each restart
• Notebook starts up the moment the Magsafe adapter is connected without waiting for power button to be pressed
• An update for "MacBook Pro Retina Display SMC Update 1.2" keeps appearing in Software Update
Recommendations from Apple Support
• Perform SMC Reset (http://support.apple.com/kb/HT3964)
(Done - no change in status)
• Run Disk Utility
(Done - no errors found)
• Run Apple Hardware test (http://support.apple.com/kb/HT1509)
(Done - no errors found, no change in status)
• Visit Apple Store
(Done - they confirmed no issue with Magsafe adapter. For a fee they are happy to change the battery if confirmed faulty and re-install the OS if the battery is not the issue but am uncertain that the OS re-install will resolve the issue because I have read online about a similar case where a re-install did not resolve the issue)
• Check System Report/Hardware/Power
(Done - Health Information/Cycle count:0, Battery installed: No)
• Perform NVRAM Reset (http://support.apple.com/kb/HT1379?viewlocale=en_US)
(Done - no change in status)
Comments and additional Observations
Please note the following;
• All of the symptoms above appeared after a system software update on October 11, 2013
• This update first appeared on October 10, 2013 but I was too busy to apply it especially because it required a system restart
• The battery was fully charged when I decided to apply the update on October 11 morning after I got to work
• Normally on full charge, the battery will typically deliver 3 - 4 hours depending on usage and up to 6 hours when idle
• The said update was not interrupted or anything of the sort
• On the day the symptoms were first observed when I first logged the case with apple, the system ran on battery while it performed the Apple Hardware Test while I was driving to the Apple support store on my way home even though the status bar was indicating "No battery available"
I make the following deductions solely based on my observations
• An apple authorized system software update broke the system
• The nature of the failure is communication related - the battery charging circuit and related systems are not getting the necessary instructions to function as they should (It's a known fact that rechargeable batteries do NOT die instantaneously, the total hours they run on full charge will gradually reduce over time as they degrade on use)
• It’s possible the update is not being applied correctly because the item “MacBook Pro Retina Display SMC Update 1.2” is still in Software update after subsequent attempts to apply it
• The high fan speed is nothing to do with high temperature or high processor load, according to the Activity Monitor utility the highest CPU utilization 1.9 – 4.7% is by kernel_task (PID 0) followed by activitymonitord at 1.8 – 2.2% (PID 481)
• The symptoms match what an SMC reset should resolve according to Apple documentation
• This is a known problem within Apple based on the documentation provided and the numerous similar cases reported online
Summary;
The system is running OS X 10.8.5
I have provided this detailed documentation in the hope that someone who understands this system can say exactly what is going on. It's meant to be a dream machine but now you can hear the fan from across a large room, the battery doesn't charge and is in fact not recognized so I lose data if the Magsafe adapter gets unplugged, and I have to reset the system date each time I restart the notebook.
I've used this notebook with utmost care for a little more than a year, this investment of over $3,500 could have bought 3 high end notebooks from DELL or HP but I chose Apple.
I have suffered untold loss in productivity in the last 10 days since this issue occurred, I respectfully request Apple to fix my notebook. -
I have a macbook pro core i7 mid 2012
And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank youIf you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
Kernel panic at startup following updated to 10.6.8
Following update via software update to 10.6.8, I had a kernel panic at start-up. I was able to start up in "safe" mode. I repaired permissions (numerous), verified the HD (appeared OK). Rebooted in normal mode, and got kernel panic at start up. Again booted into safe mode. Looked at the panic log and decided to get rid of two applications that I suspected might be problematic (soundflower and VaraAudio software). Rebooted in normal mode and again had a kernel panic at start up. Here is the text of the panic. If anyone can shed some light that would be great. If not, I can erase and restore via time capsule but I would rather not go to that trouble. Thanks in advance.
Interval Since Last Panic Report: 7394 sec
Panics Since Last Report: 7
Anonymous UUID: C688F3AD-FEEA-4DBC-8820-7D67ED942A48
Sun Jun 26 01:25:37 2011
panic(cpu 2 caller 0x2abf6a): Kernel trap at 0x7a57c233, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x0c03b100, ECX: 0x01500000, EDX: 0x00000001
CR2: 0x00000000, EBP: 0x829e3df8, ESI: 0x00000001, EDI: 0x0c03b100
EFL: 0x00010282, EIP: 0x7a57c233, CS: 0x00000008, DS: 0x0d3b0010
Error code: 0x00000000
Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
0x829e3c08 : 0x21b837 (0x5dd7fc 0x829e3c3c 0x223ce1 0x0)
0x829e3c58 : 0x2abf6a (0x59e3d0 0x7a57c233 0xe 0x59e59a)
0x829e3d38 : 0x2a1a78 (0x829e3d50 0xd3b9dc0 0x829e3df8 0x7a57c233)
0x829e3d48 : 0x7a57c233 (0xe 0xd3b0048 0x829e0010 0x510010)
0x829e3df8 : 0x7a57b1f5 (0xc03b100 0x7a581480 0x7a581460 0x0)
0x829e3e18 : 0x543f60 (0xc03b100 0xbef4f00 0x1 0x506b76)
0x829e3e78 : 0x542137 (0xbef4f00 0xc03b100 0xd3c0cc0 0xd3a59e0)
0x829e3f28 : 0x5426e9 (0xbef4f00 0xd2f9e80 0x0 0x516766)
0x829e3f78 : 0x5443d5 (0xbef4f00 0x8 0x829e3fac 0x1)
0x829e3fc8 : 0x2a179c (0xda587e0 0x0 0x2a17ab 0xd20fb7c)
Kernel Extensions in backtrace (with dependencies):
com.apple.iokit.CHUDProf(3)@0x7a57a000->0x7a584fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K540
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro6,1 (Mac-F22589C8)
System uptime in nanoseconds: 27192953361
unloaded kexts:
(none)
loaded kexts:
com.apple.driver.AudioAUUC 1.57
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleIntelYonahProfile 14
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.iokit.CHUDProf 3
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMikeyDriver 2.0.5f13
com.apple.driver.AppleIntelHDGraphics 6.3.6
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleHDA 2.0.5f13
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AppleIntelHDGraphicsFB 6.3.6
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.iokit.AppleBCM5701Ethernet 3.0.5b8
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.GeForce 6.3.6
com.apple.driver.AirPortBrcm43224 428.42.4
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleBacklight 170.0.46
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleUSBTCButtons 201.6
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBTCKeyEventDriver 201.6
com.apple.driver.AppleUSBTCKeyboard 201.6
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleUSBUHCI 4.2.0
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.12
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17 - last loaded 26717749780
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.driver.AppleHDAHardwareConfigDriver 2.0.5f13
com.apple.driver.DspFuncLib 2.0.5f13
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleHDAController 2.0.5f13
com.apple.iokit.IOHDAFamily 2.0.5f13
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.nvidia.nv50hal 6.3.6
com.apple.NVDAResman 6.3.6
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.driver.AppleUSBMultitouch 207.7
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.XsanFilter 402.1
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 289.1
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro6,1, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.57f17
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 0 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500420ASG, 465.76 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000 / 7
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 3Update - I could not resolve the conflict - ran extended hardware test, disc repair, both showed no errors. Removed startup items that were third party. Decided to erase/re-install. I am now on 10.6.8 with no problems, and will be adding back my stuff one app at a time. Hope all goes smoothly from here.
-
HP Notebook System BIOS Update (AMD Processor)
Hello,
I was looking through my updates and everything to make sure my computer is working to it's fullest. I noticed there was a recommended update that I should follow through with which is the HP Notebook System BIOS Update (AMD Processor), and I've download it and installed it, then afterwards, my computer told me that I had to restart it, which I did. I agreed to update it but it keeps popping up in the suggested updates and I've tried multiple times to do it. It never seems to work!
Please help.Here is a direct link to the F.36 BIOS which is the latest. Have you tried downloading it and manually launching it rather than using the HP Update utitlity?
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-135428-1&cc=us&dlc=en&lc=en...
Make sure you have a charged battery and AC plugged in. Let us know what happens.
You might also try going into the BIOS (F10) as you power up and check the existing BIOS version. You may already have F.36.
If this is "the Answer" please click "Accept as Solution" to help others find it. -
Windows failed to install the following update with error 0x80070005
Hi,
We are using Win Server 2008 R2 std. Server and Win 7 Professional X64 clients. During the second batch of update we got an Error while updating on one client machine and the system restoring back automatically However other clients are updating and working
fine. Then i tried to install the updates one by one manually then successfully installed all the updates except one ie. KB2862330. It keeps failing then i found an article suggest to check the update with Admin Previlage, disable Antivirus and Scan the
computer for Malware (Using MS Security Scanner and Malwarebytes). I tried both but never works. After that i got 2 batch of updates, everything is updating and trying to update this (KB2862330) and failing till date. What is the issue and why its not updating
on one machine?
Installation Failure: Windows failed to install the following update with error 0x80070005: Security Update for Windows 7 for x64-based Systems (KB2862330).
KB Article Followed : http://support.microsoft.com/kb/968003/en-usOkay, good. The SURT shows no errors.
So now we can blame the problem exclusively on the update itself.
And yes... there are still known, ongoing issues with KB2862330.
Truly, my suggestion is to just not install it at all. Unless you've identified a known risk via a USB vector on particular systems where the vulnerability would be considered a critical risk, I'd say that the risk caused by the vulnerability is significantly
less than the risk of additional headache caused by the update itself. I have still not deployed MS13-081 to any of my systems, and frankly, I don't plan to.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Hello,
I need your help. I ran HP System Diagnostics following recent BSOD incidents (about 3) on my Pavilion dv6. I ran all the tests successfully except Memory Test as it takes 6 hours (approximately).
Interestingly the BIOS test came up with an error message "The System BIOS update failed. Failed reading BIOS image file". I tried running BIOS driver update from th HP website for my dv6 notebook but I am not sure it worked. During the update the computer would shut down - is that normal?
What can I do to check that my BIOS from 25 January 2013 is the current version? More importantly prevent future BSOD appearing. I have plenty of memory, so rather intrigued. Ran Norton and Microsoft Security and no viruses etc.
Hope you can help.
Many thanks,
BarbsHi,
So the system shut down is normal for BIOS update and if I can restart the computer, therefore assuming the update worked.
I checked HP System Diagnostics the BIOS test still returns with an error message "The System BIOS update failed. Failed reading BIOS image file".
Any other suggestions?
Thanks again,
Barbs -
I still have an iPad 1, and need to update to iOS 7 to use Keynote, Pages and Numbers but I get the message the my system is updated in iOS 5.1.1 and doent's offer me another update! How can I update it? Or I can't?
ayrosa wrote:
I still have an iPad 1, and need to update to iOS 7
Sorry... This is not possible. The iPad 1 can Only go as far as iOS 5.1.1 -
System Hardware Update - 1/27/2015
On my Surface Pro 3, I have a "System Hardware Update - 1/27/2015" that continues to be listed as available and continuously fails. Any idea what this is, and why it's failing? I've provided the precise listing, and it doesn't have a KB number.
On Tue, 24 Feb 2015 12:15:04 +0000, colakid wrote:
Go to the vender website, check what the system update my be, Not sure about this, since all the complaints with system updates crashing after windows update. It is possible Microsoft has done something to prevent the update.
The vendor in this case is Microsoft. If you'd read the entire thread you'd
notice that we're discussing a firmware update for the Surface Pro 3.
Paul Adare - FIM CM MVP
Once again your arrogance stepped in your way. As I said go to the vendors website I'll post if for you.
Your chipset is intel and graphics you may also go to intel and see if there are drivers for your graphics. Which is included in the vendor list.
http://www.microsoft.com/en-ca/download/details.aspx?id=38826
http://www.intel.com/support/utilitytools.htm?_ga=1.232947806.1107013541.1424801875
Surface Pro 3, Surface Pro 2, and Surface Pro firmware and driver packs
Note:There are multiple files available for this download.Once you click on the "Download" button, you will be prompted to select the files you need.
File Name:
Surface Ethernet Adapter.zip
Surface Gigabit Ethernet Adapter.zip
Surface Pro 1 - January 2015.zip
Surface Pro 2 - January 2015.zip
Surface Pro 3 - January 2015.zip
Surface Pro 3 January 2015 MSI.zip
Surface Pro 3 KB2978002.zip
Windows8.1-KB2969817-x64.msu
Date Published:
2015-01-30
File Size:
46 KB
57 KB
372.8 MB
154.0 MB
158.3 MB
145.6 MB
7.5 MB
343 KB
Spec sheet
CPU: 1.9GHz Intel Core i5-4300U (dual-core, 3MB cache, up to 2.9GHz with Turbo Boost)
Graphics: Intel HD Graphics 4400
RAM: 8GB LPDDR3
Screen: 12-inch, 2160 x 1440 multi-touch (ClearType, 3:2 aspect ratio)
Storage: 256GB SSD
Ports: One USB 3.0, Mini DisplayPort, microSDXC card reader (up to 128GB), headphone/mic jack
Connectivity: 802.11ac Wi-Fi, Bluetooth 4.0
Camera: Two 5MP webcams (1080p HD video)
Weight: 1.76 pounds
Size: 7.93 x 11.5 x 0.36 inches (W x D x H) -
System software updates possible?
recently whwnever I try to opdate my system software from the finder the App Store app comes up. Is this the new way or .... it never says my system needs updating nor does it update my 4S, 3gs, iPad, Macbook Pro or this imac.
With Mountain Lion the App Store is the method by which you purchase and upgrade purchased software. It also replaces the old Software Update preferences for system upgrades/updates. However, the App Store has nothing to do with iDevice software. For that you use the iTunes Store.
If you are using Lion or earlier system updates continue to come by way of Software Update. -
ABAP Systems stopped updating SLD
Last week I added my dev PI SLD system as a data supplier to my existing Solution Manager based SLD. Up to then my ABAP and Java systems were regularly updating their entries in the Solman SLD. After adding the dev PI SLD, I see updates about the PI landscape's ABAP systems in Solman (previously not defined) and I get regular updates from all my Java systems but the updates from ALL my non-PI ABAP systems have stopped.
I have checked in RZ70 and done test runs etc but nothing seems to make the data actually appear in my Solman SLD. My Java stacks, including my production and dev Solman systems appear in the dev PI SLD as Java systems. The Solman systems are dual stack and appear under both ABAP and Java systems in the Solman SLD but only the Java stack appears in the PI SLD.
Any ideas what I can have done to stop the updates reaching Solman's SLD?
Why only ABAP?
Why does Solman SLD get updates from PI SLD about its ABAP stacks?<h1>I have:</h1>
<h2>* checked all RFC destinations</h2>
<h2>* run RZ70 in the ABAP system to push the data manually without error messages in the job log, SLD log or SM21 system log</h2>
<h2>* restarted the Solution Manager system containing the SLD and rerun RZ70</h2>
None of these basic checks have corrected the situation.
In desperation I deleted the connection from my Solman SLD to the PI SLD overnight. The PI SLD system has still managed to do an update into the Solman SLD this morning for it's own ABAP stack. It didn't update the QA PI data and none of the other 29 ABAP systems have updated either.
NOTE that this problem doesn't just affect one ABAP system. I have 29 ABAP systems defined in my Solman SLD (some are deactivated but most are live) and none of the live ones are updating. This has got to mean that there is something wrong in the Solman SLD, not the ABAP systems, but the only thing that has changed, to my knowledge, was the addition of the PI dev systems SLD as a data supplier.
<h1>A question.</h1>
If I want my Solman SLD to be the repository of administrative data but I want my PI dev SLD to know about all systems, in which system should I be adding a data supplier pointing to the other? -
Iphoto upgrade it says your photos will not be readable following update. Will my photos be lost?
Your photo library will not be readable by previous versions of iphoto after the upgrade. Some may be on the cloud but how can I save them? I haven't backed anything up and can't open iphoto to try. I/ve copied it onto my desktop but can't open that either!
Please help a t otal idiot!Before you do anything else make a backup of your iPhoto library. Disk drives do fail regularly, and one day all your photos will be gone for sure, if you do not keep copies on a different drive.
You can simply drag theiPhoto library from your Pictures folder to a different disk to create a backup copy.
iphoto upgrade it says your photos will not be readable following update. Will my photos be lost?
You misunderstood the warning. When you use a new version of iPhoto with yiur iPhoto library, the older iPhoto version will no longer bea ble to read the library, but naturally, the new version you are using now, will be able to show your photos.
So proceed with the update - that is a routine warning, and is necessary, to be able to use your iPhoto library with the new version of iPhoto. -
Adobe digital does not recognise my Kobo e-reader following update. Tried factory reset of Kobo and re-installing Adobe. Any suggestions please?
The lack of response is deafening. Im guessing then that Firefoix has serious issues then?..well it'll be there loss if more, like me, opt for Internet Explorer and Google Chrome (both these browsers work fine with the latest Flash Player installed)
Maybe you are looking for
-
How can I fix this recurring network error in the Messages App?
I use the Messages app all the time at work to chat with co-workers about jobs, etc... We have it set up using our company accounts hosted by gmail. Since upgrading to Mountain Lion we have all experienced the following issue: At the end of the day,
-
Macbook Pro Time Capsule Apple TV Ipad Iphone Hello all, I spent quite a lot of time (not a geek but not inexperienced) setting my Time Capsule up as a back up drive and a store for my DVD's so I could access them from my ipad and Iphon via FileBrows
-
CAn anyone help with the above question
-
When will Apple TV support YouTube subtitles???
I noticed while using the Apple TV, that most of the videos I try to watch that have English subtitles will play the video but not the subtitles. So I was wondering if anyone knows when Apple TV will support YouTube subtitles because a lot of videos
-
I have the Quantum system you just did an upgrade to the guides and other things, I have 4 boxes, Some programs freeze for a second then restart a few seconds behind, also when I rewind a live program it stops during the playback and goes back to liv