Unrestricted Stock of issuing Storage Location in reservation

Hi Experts,
We have a requirement, we want that unresticted stock of issuing storage location is printed on reservation (MB23) Thru MB25.
How it is possible.
Kindly help me out, can we use sqvi or something else.
Regards
GR

HI ,
Just Modify this Report with the help of a Abaper and ask him to add an additional column in the report that is the Stock in the unrestricted use for this Material and Plant
combination.
TO achieve the Since we know the Material ,plant and storage location
PIck up the Material Number --RESB-MATNR
the Plant code --RESB-WERKS
the storage LOcation--RESB-LGORT
Go to Table RESB table in this table against the Feilds RSNUM -Reservation NUmber and RSPOS( Reservation item number)
IN some cases the storage location would not be entered by the user ,take care ,he enters the storage location by every user ,so make it mandatory in the screen layout.
After Picking up all the three values ,pass those values in the Table.
MARD line item vise present in the reservation (maintain a loop for the same)
in this table pick up value in the Feild MARD-LABST which is the stock in the unrestricted use.
one thing ,i dont know the exact requiremnet ,but it is to resrict the user from creation of reservation more than the stock ,it can be done by avaliability check.
hope so it helps
Regards
Anjanna.

Similar Messages

  • Delivery split for unrestricted and vendor consignment storage locations.

    Hello All,
    The situation is I have unrestricted stock in a storage location STL1 (100 EA) and vendor consignment stock in another storage location STL2 (100 EA). When a sales order is created for 130 EA, I would like to issue stock from STL1 for the quantity available (100 EA) and remaining quantity (30 EA)from STL2 on the same delivery or different deliveries but I want to identify both S.Locs determined at Delivery level. My plant is not WM managed and materials are batch managed.
    I did try configuring stock determination group/rule and used 'MALA' as my storage location determination strategy but unable to achieve the same. I believe stock determination works at the time of PGI and not sure if works for batch managed materials.
    Any suggestions/help is much appreciated.
    Thanks
    Sumanth

    Hi Manish,
    I have already configured "Stock determination in SAP".
    Header Table:
    Sorting: Item table (Ascending) , Rank order - Priority 1
    Quantity Distribution: Qty proposal - 1
    Item Table:
    Special stock indicator     S.Loc     Priority Indicator
    F                                       STL1     1
    K                                       STL2     2
    With the above configuration, my delivery is not getting split into multiple items.
    Regards
    Sumanth

  • Movement type from unrestricted use to particular storage location

    Hi ,
    I have situation wherein the stock was goods receipted with referendce to  a PO into unrestricted stock (without mentioning storage location).
    I now want to transfer this stock to a particular storage location.
    Please let me know how to do this,
    Regards,
    Vinayak

    Hi,
    How can you receive a material without mentioning the storage location in MIGO (101), it is not possible as per standard system.
    Please check the PO, It must be created with account assignment that means it was consumed at the time of GR, that is the reason you do not need to enter storage location at MIGO
    So if you need that material in storage location cancel that GR, change that PO receive again in desired Store

  • Stock Transport order issueing storage location determination

    Folks,
    In case of a Stock transport order scenario in which plant A with SLOC1 delivery to plant B with SLOC 2. Is there any option how the issueing storage location can be determined? The delivering plant can be determined through the special procurement key but there is no option for the issueing SLOC.
    Regards,
    MdZ

    Hey Karen!
    I am not sure if I understand your problem correctly.
    You do not want the system to create a new MARD entry when postin goods issue.
    You can enable/ disable this function with transaction OMB3 in the customizing.
    have fun
    Flo

  • Stock Transport Order - Issuing Storage Location

    Hi gurus -
    When raising a Stock Transport Order (UB type) and Issuing Storage Location is populated manually with an SLoc not extended for material in supplying plant, will system give an error or allow STO to be saved/created without throwing an error?
    Thanks,
    Karen

    Hey Karen!
    I am not sure if I understand your problem correctly.
    You do not want the system to create a new MARD entry when postin goods issue.
    You can enable/ disable this function with transaction OMB3 in the customizing.
    have fun
    Flo

  • QI stock from one Storage location to other

    I have a scenario where QM is implemented and Material is received in storage location "A" against purchase order through movement type 101.But for testing we need to send material to storage location"B"for testing. I want to send the material under inspection lying in storage location "A" to "B" for testing purpose. Is it possible to move stock under quality inspection , If yes through which movement tyep. Is there any process in QM which allows the stock under quality inspection to move.
    Thanks in advance
    Regards,
    Jeewan

    hi
    Goto MB1B and try with this movement types
    311 Transfer posting storage location to storage location in one step
    The quantity is transferred from unrestricted-use stock of the issuing storage location to unrestricted use in the receiving storage location.
    Possible special stock indicators: E, K, M, Q
    313 Stock transfer storage location to storage location in two steps - removal from storage
    The quantity is transferred from unrestricted-use stock of the issuing storage location to stock in transfer in the receiving storage location.
    Possible special stock indicators:
    • K Goods receipt for purchase order to consignment stock
    • O Goods receipt for purchase order to stock of material provided to vendor
    • E GR for purchase order or order to sales order stock
    • Q GR for purchase order or order to project stock.
    Regards

  • Stock in 3 storage location..

    Hi Friends,
    I have 3 storage location where I place stock. As you know that we have only one defualt storage location in Production Order. When system not able to find a stock at that storage location then it will create missing part list msg.
    I would like system should pick the stock up automaticaly from another storage location, if stock in not available in default storage location.
    I would appriciate, if you could write in steps to do config.
    Thnks

    Hi,
    There may be requirement to withdraw the material from different stocks for goods issues and stock transfers based on some criteria or strategies. To meet this requirement in SAP we have stock determination strategies which determine how and when the material should be withdrawn, and from which storage locations and stocks. We can include the following stocks for the purpose of stock determination: unrestricted-use stock u2022 vendor consignment stock u2022 pipeline material u2022 sales order stock u2022 project stock.
    Based on the stock determination strategy you define in configuration, the system makes decisions on material withdrawal depending on the material, plant.
    Configuration
    SPRO > Materials Management > Inventory management and Physical inventory > Stock determination
    Define a stock determination strategy, according to which stocks should be reduced. Each strategy is determined at plant level based on a stock determination group and stock determination rule.
    Assign a stock determination group to the material in the material master record.
    Regards.

  • Need to display the Stock Values at storage location level - 0IC_C03

    Hi All,
    I am developing Stock Movent Report on 0IC_C03 - Material Stocks/Movements.
    I have more than one storage location for plant. Stock quantities are calculating at storage location level and Stock Values are calculating at plant level.
    I have no issues with quantities. Only problem with Values.
    2LIS_03_UM is not picking the starage location, so that the revaualtion values are falling under unassigned nodes. When i set filter on storage location these values were not showing as they are under un assigned nodes (#).
    I want to get the Stock Quantity and Stock Values at Storage location level in my report.
    I found that soulution for that is Applying SAP Note : How to Realize summarized display of stock values on storage
    I have done development as per the document. But when i run the Query it is going to debug mode first and then it saying This program cannot display the webpage
    Can any one faced the same situation, Please help me if so.
    Thanks in Advance.
    Gopal N

    Hi Sachein,
    I am getting this An exception(CX_RSR_PROPAGATE_X) occured when debugging, and then it leads to next screen saying that:
    This program cannot display the webpage
       Most likely causes:
    You are not connected to the Internet.
    The website is encountering problems.
    There might be a typing error in the address.
       What you can try:
         Check your Internet connection. Try visiting another website to make sure you are connected. 
         Retype the address. 
         Go back to the previous page.
         More information
    Please let me know you need any more information.
    Thanks in Advance
    Gopal N

  • Issue Storage Location in Components details Subcontracting PO

    Hi all
    I need to implement this process in SAP:
    I have to send material X, from storage location B 'broken', to my supplier for repairing. After He has repaired it I post good recipe of material X in the storage location A 'adjusted'.
    I plan material X through MRP at plant level only for storage location A.
    In the material master I've set procurement type 'F' and Special Procurement '30'.
    I created a recursive BOM for material X where I entered, for component X, B as issue storage location.
    In this way MRP run (with '1' as value of 'Create PR' parameter) creates subcontracting PR with X as material to buy and X as component to send to vendor, but in the detail of component I have the storage location field kept empty.
    This for me is a problem.
    In fact when I create PO from this PR automatically through ME59 transaction, the System creates a requirement at plant level for component X.
    But this requirement is for broken material and has to be covered by stock in storage location B.
    I know that is not easy to understand all the details of this process, even due to my english, but I hope someone can help my.
    Please if you need a clear up, ask me.
    Thanks for your help
    Yours faithfully
    Paolo Verderio

    Hi Paolo,
    don't worry. Your explanation is well understandable.
    I cannot advise how to fix the problem with the missing storage location. I just have some doubts that it is the right approach to distinguish between an boken and a repaired material by storage location. Even for stock valuation there is certainly a difference between both, that you can't make transparent by storage location, and also if you look at your available stocks.
    I would recommend to have either different materials or different valuation types. I have to confess that I am not sure that valuation types would help for your subcontracting PO.
    best regards,
                     Udo

  • Making Issuing Storage Location" required entry

    Hi,
    I want to make "Issuing Storage Location" required entry only stock transport order. Our document type is ZUNS. Selection key is UBF.
    In SPRO:
    Material management --> PO -->Define screen layout at document level
    I ve selected "UBF Stock transport order" document type. Selection group is supplying plant. Then I ve marked "Issuing Storage Location" as a required (mandatory) entry indicator.
    Then I ve crated a stock transport order but Issuing Storage Location field is not mandatory. Is there another way make it required entry?

    Hi,
    I believe you will have to activate the settings for STO between storage location, in the setup stock transport order config, Set Up Stock Transfer Between Storage Locations, do the settings,read the IMG documentation if you need help in setting this up.
    Regards
    Chandra Shekhar

  • Stock transfer between storage location in IS -Retail

    Hi,
    I want to have a Stock transfer order between two storage locations in the plant.
    I have activated the "Activate Stock Transfer Between Storage Locations", now i can create a STO and have the "Issuing SLoc" tab.
    Having that i get an error message "Not possible to determine shipping data for material XXX" Message no. 06280.
    I am trying to have the shipping data in customizing for set stock transfer  - "Define Shipping Data for Plants", but my site is not listed due to the use of IS Retail. Is there a way to configure it?
    Tnx
    Lior

    Hello Lior,
    in Retail your distribution center is a vendor and a customer, and your store is a customer. Therefore when you create master data for your distribution centre and store, you also create the vendor and customer masters that are required.
    By this link of the DC / Store to the customer master the shipping data is derived. I hope this answers your question.
    If you have further queries related to this, please do post them.
    Regards,
    Smitha

  • Stock Transfer between Storage Location with Order

    Dear MM experts, 
    I am into SAP SD.
    Our client wants to Transfer Stock from one Storage Location to another Storage Location of the same Plant. (This can be easily done thru MB1B via Transfer Posting)
    But the unique requirement here is they require some kind of Delivery Order or Tansfer Order to be created first & only based on that document user can transfer Stock between Storage Locations of a same Plant. (Similar to Inter-Plant Stock Transfer where we create Stock Transfer PO & then move goods between plants).
    Can you please suggest on how to achieve the above scenario.
    Thanks,
    Jignesh Mehta
    Mumbai

    hi
    Stock Transfer between Storage Locations
    u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
    u2022 As a result of which user can input issuing storage location with supplying plant.
    u2022 Facility of using different delivery types for different issuing storage locations is available.
    u2022 Shipping Point data can also be determined based on the issuing storage location.
    refer following
    http://sapfunctional.com/MM/StockTransfer/Configure.htm
    http://help.sap.com/saphelp_scm41/helpdata/EN/23/29cf20eabe094e957763a46aa5be9d/content.htm
    regards
    kunal

  • Determination of Issuing Storage Location in STO

    Hi Gurus
    How can we auto determine the issuing storage location in Stock Transport Order (STO)? If it is via user exit, could you please provide the user exit?
    Appreciate yr help on this.
    Thanks
    Rgds..Sanjay

    Had you gone to this node
    Materials Management -
    > Purchasing -
    > Purchase Order -
    > Set up Stock Transport Order  -
    > Set up Stock Transfer between Storage Location -
    > Business Add In for Deterination of Issuing storage location.
    See /ISDFPS/MD_EXT_SUP may be useful .

  • Issuing storage location for purchase requisition

    Hi All,
    Anyone knew how to have a default issuing storage location on purchase requisition (source of supply tab) created through MRP?
    Thanks.
    Jump

    Hi,
    For this you need to implement BADI MD_EXT_SUP in combination with special procurement type 40 or 45.
    Documentation of this badi:
    Business Add-In for Determination of Issuing Storage Locatio
        Use
        You can use this Business Add-In (BAdI) to control the determination of
        the issuing storage location during stock transfer processing.
        The BAdI is used in the following components:
        Material requirements planning (PP-MRP)
        The BAdI runs both for manual creation of externally procured planned
        orders, and in the MRP during creation of stock transfer procurement
        proposals.
        Purchasing (MM-PUR)
        The BAdI runs as part of the source determination for purchase
        requisitions and during purchasing.
        Standard settings
        o   The Business Add-In is not active in the standard.
        o   The Business Add-In cannot be used multiple times.
        Example
        Sample coding is stored.
        Further notes
        Documentation on BAdI method GET_SUPPLYING_SL
        Documentation on BAdI method GET_PLIFZ
    MZ

  • Stock removal from storage location

    Dear All,
    System showing some stock at various storage location, but whic is physically not in location. Every month balance sheet this stock is shwoing.
    Please explain me any how to delete this stock from those storage locations.
    Thanks in advance.
    Thanks & Regards,
    Krish

    Hi sap gurus,
    there was an production order xxxxx for a machine. so all the materials was booked for that order. then , suddenly the requirements changed. so, they stopped the order n used the whole material for another similar order. any extra material needed 4 the new production order was added to the new one and closed the new order. But, they hav not sent back the materials for the old production order. It has resulted in over valuation of the stock-WIP. i/e., there is a machine worth 15 lakhs on the system virtually. wheras in reality, physically, the machine doen't exist.
    Now, the issue is if u want to reverse the work in progress on 31.03.08, will the system let us do (i.e. can we reverse a WIP on a previous date??). if so, pls suggest the complete procedure including Tcode's to use.
    Thanks
    Pavan

Maybe you are looking for