Unrestricted stock to restricted and retricted stock to unrestricted
Dear Experts,
What movement type to use for below transfer posting?
1) unrestricted stock to restricted
2) retricted stock to unrestricted
Thank you.
341 Transfer posting unrestricted-use stock to restricted-use stock
342 Transfer posting unrestricted-use stock to restricted-use stock - reversal
343 Transfer posting blocked stock to unrestricted-use stock
344 Transfer posting blocked stock to unrestricted-use stock u2013 reversal
Hope this will help you
Enjoyyyyyyyyyyyyyy
Akshit
Similar Messages
-
Restricted and non-restricted stock
Hi Experts,
Does anyone know where i can find in the BC the KF Restricted and non-restricted stock (in R/3 MARD-SPEME and MARD-LABST)? If there is no standard for this, where do you think is the best extractor to enhance with these fields?
Thanks in advance,
NunoHi Nuno,
These fields are part of the 2LIS_03_BX and 2LIS_03_BF extractors. MARD-SPEME (Blocked Stock) should go directly into 0BLOCKEDSTOCK's in flow and out flow characteristics. MARD-LABST can go into a custom key figure.
If you install the 0IC_C03 cube and the 2lis_03 extractors, then you can look at the update rules. These rules aren't for the timid! In the update rules or on a query, you can select stock type = K and Stock Category <> ( K or E ) for unrestricted use stock (beware this also includes vendor consignment and customer consignment). Blocked stock is identified as Stock Type D and Stock Category <> K or R.
Brian -
Restricted and Calculated Fey figures
Hi !
Where can I find the ABAP routines of global restricted and calculated KF ? How these get executed ?
Please tell with the example of 0TOTALSTCK from inventory .Not sure what you exactly meant by ABAP Routines for KFs?
0TOTALSTCK is a Non-Cumulative KF which is calculated based on two other KFs [0RECTOTSTCK] Receipt Quantity Total Stock AND [0ISSTOTSTCK] Issue Quantity Total Stock.
This is a typical case of having an Inflow field and the OutFlow field while the 0TOTALSTCK gets calculates as Net Inflow - Net Outflow
So there is no routine in this case.
regards
Anujit Ghosh -
Please help!
It would be tremendously helpful to be able to access, set restrictions, and make changes from the parents device, to all devices under the same iTunes account, so that I could make changes to my kids devices without physical access.
I understand that I can set up a different Apple ID for the kids devices, or take physical control of the device and make the changes myself. However, my teenage son is technically savvy enough to have a job in Silicon Valley, as are most young people these days. However, in order to access his devices the current way, I first have to bypass the four digit pass code. This starts a fight of why I need in the device and continues to escalate. The argument that I am the parent will gain access but the fight is simply exhausting, and quite frankly shouldn't have to happen at all. He is not yet an adult, he did not pay for his iPad or iPhone and I, as a parent, should have not only have the right to change options at will, and from anywhere, but look at history or current activity when I feel like it.
I currently have the settings where app and in-app purchases require my password to be put in, and he must come to me to type it in, but I need more control and would like, and should be able to access any of our six devices and make individual changes simply by logging in to my account, with my password.
If I can see all my devices on the "Lost My iPhone" app, this technology should be easy to make happen.
C'mon parents! I have a pretty good kid, given all things that they can get into, but I am not stupid. For everything I see has been done, there is much more I haven't seen. I want my children to be kept safe and be able to know what they are looking at or listening to. We parents are the only ones who know our beliefs and what our kids can handle and when.
Thanks for any support or information that I may be missing in order to fulfill my request.There are mobile device management solutions that can do this, including in Apple's OS X Server system, but most parents generally find that setting this up is more work than it's worth. If you're interested, though, there are a couple that at least purport to be free (I don't know if there are any hidden "gotchas"):
http://www.unwireddevicelink.com/features/
https://meraki.cisco.com/products/systems-manager
and Apple's system:
http://www.apple.com/osx/server/features/#profile-manager
I don't think any, however, allow you to see current activity or browser history. iOS doesn't expose those to access from MDM solutions, to the best of my knowledge.
Regards. -
Lost my phone,imessage,and app store apps and when i try to restore it,its still showing up like this,i have checked restrictions and spotlight search but still no luck,please help!
Settings > General > Reset > Reset Home Screen Layout
-
what do i have to do if in my ipod i have locked restrictions and i want to unlocke it but i dont know the password.
You will have to restore as new
-
After upgrading software on my iphone 5. I am not able to make in app purchases. I have tried to turn off restrictions and still not able to make in app purchases. Can anyone help me?
If there are no restrictions engaged and you are not receiving any Error messages or Alerts...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
My restrictions are turned on. I didn't turn them on. The only code I've used on my ipad is to unlock it and that code won't work on my restrictions. How do I turn off restrictions and prevent them being turned on again?
The only option is to wipe the device clean and restore it to factory settings. Hope you have a backup.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
Cheers, Tom -
HT5492 I had disabled my restrictions and my apps are not showing again in the screen!
Hi everyone!
please help me with my probleme
I had enabled my restrictions by accidant and some of my icons apps gone missing and if I wanted to open them I have to go to the app store, then I disabled my restrictions and they are still not showing on the home screen!
please if anyone know how to make them appear again pleeaaase tell me!iPhone apps don't work on Macs and Mac apps don't run on iOS devices like an iPhone. If you sync an iPhone to a Mac, the apps from the iPhone are stored in the Mac's iTunes app's media library as a backup.
The App Store app on a Mac is not the same as the App Store app on the iPhone. The Mac version is the Mac App Store, apps for Macs. The iPhone version is the iTunes App Store, apps for iOS devices. -
I enabled my restrictions and then disabled them succuessfully, but in the process I lost all my folders that my apps were defined into. The apps are there but the folders don't exist anymore, please help.
You may want to try restarting to see if that has any effect Turn your iOS device off and on (restart) and reset
-
Restrictive and non-restrictive procedures!
Hi all,
Wanted to knwo what are restrictive and non-restrictive procedures in oracle forms.
Thanks and RegardsI think where Frank said "one-time triggers" he meant "non_repeating TIMERS".
Here is an alternative way to get around the restricted built-in problem which does not seem to be widely known:
Create two numeric control fields, say TRIGGERING_FIELD and TRIGGERED_FIELD.
TRIGGERED_FIELD has a formula calculation property of
MY_FUNCTION(:TRIGGERING_FIELD)
MY_FUNCTION is created in the form program units and can do anything you want, including restricted built-ins. The value it actually returns is irrelevant (although you could use it as a return code if you want).
Then all you need to do is modify the value of TRIGGERING_FIELD (perhaps multiply it by -1 ) which you can do in a trigger that does not allow restricted built-ins. The calculation will see that its input parameter has changed and will recalculate, thus running the function and doing all the restricted stuff. -
Please help. I set a password on my restrictions and now I've forgotten it. How can I reset it.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
Cheers, Tom -
I don't remember setting a pascode in the restrictions and now I can not get my icloud on, can you help me?
If you don't remember the restrictions passcode, your only option is to force the phone into recovery mode and restore it as a new device.
Do NOT restore your backup. The restrictions settings are part of the backup. -
im playing rage of bahamut at the moment and every time i try to buy ragemedals it comes up with (please contact itunes support to compleate this transaction) i have checked my restrictions and that is fine, i can buy apps from itunes. please help
What was the response from iTunes after you contacted them like the message said to do?
Apple - Support - iTunes - Contact Us -
In my iPhone 5there isn't Books in restriction :-( and How can I
The Kindle app doesn't appear to be in the UAE store, so I assume that Amazon haven't granted Apple a licence to have it there.
Kobo appear to have their app available there : Kobo. So you might be able to get ebooks from them.
Most ebooks have digital rights management on there which tie them to the store's own apps/ereaders - so if buying from Kobo then you will probably only be able to read them in the Kobo app etc
Maybe you are looking for
-
Best computer for FCP on college budget
Help! I am trying to decide exactly the machine I need to edit with Final Cut Pro at home. I am a college student so my budget is my student loan money (around $2000). First, I prefer to be portable so that I can transport it to and from school(so ma
-
Hi, I am not able to assign task to users. When i invoke long lived process manually in workbench, i am getting jod id/ task id but when i go in workspace using task assigned user i dont see any work on TO DO list. is it related to license or some ot
-
Problems after updating to 10.8.3
Since updating to 10.8.3 I can't throw anything in the trash from my email. I get this type of error: "296750.emlx" couldn't be copied to "Messages" because an item with the same name already exists. Then numbers change, but they each end with .emlx
-
How do I change the title of a PDF file on a iPad 2?
-
Could someone outline steps on how to setup a second set of books in ERP? Thanks