Unrestricted usage profile option

Experts
One of the developers forgot to select this option while logging on to the ESR first time and found that the message mapping objects node was not available to me.
What should be done now so that I can select the unrestricted option again and start doing message mappings in SAP PI.
We tried deleting and recreating the developer ID but this did not work

Hi,
Please follow the below link
http://help.sap.com/saphelp_nwpi71/helpdata/EN/46/8b081f8a9c01dde10000000a1553f7/content.htm
or
--> In the navigation area of the application toolbar, choose the pushbutton with the arrow symbol Change Filter Settings
Choose Restore Default
when you log in ESR you will be prompted a drop down list for all application profiles.

Similar Messages

Version 7 Resource Usage Profile Options

In previous versions of P6 you were able to check a box that gave you a calculated average when showing a resource profile. In V7, although the box is still there, checking and unchecking it makes no difference to the display. Has this feature been disabled or am I just missing a trick?
Thanks in advance

Its available from https://support.oracle.com - Solution ID 1073886.1
Primavera Project Management P6 version 7.0 (P6 v7) Service Pack 1 [ID 1073886.1]
Applies to:
Primavera P6 Enterprise Project Portfolio Management - Version: 7.0 and later [Release: 7.0 and later ]
Primavera P6 Professional Project Management - Version: 7.0 and later [Release: 7.0 and later]
Information in this document applies to any platform.
What is being announced?
Service Pack 1 for Project Management version 7.0 (P6 v7) is now available for download.
References
PATCH:9471957 - PRIMAVERA PROJECT MANAGEMENT P6 VERSION 7.0 SERVICE PACK 1

"Calculate Average" option for the Activity Usage Profile doesn't work

I have the same problem as poster 793128 in a comment for a different thread: the "calculate average" profile option doesn't work for units (it works for cost though). I've used this option a lot on previous versions of Primavera but for some reason is not working on our new P6 release 7 (stand alone). As 793128’s post says: nothing happens, nothing changes, the profile keep showing totals, doesn't matter if the "base hours on time period" box is selected or if the divider is input by the user.
The same option (calculate average / divide by) on the resource usage spreadsheet and on the tabular reports do work as expected so doesn't seem to be that I checked the wrong box for some user or administrator preference set up.
Thank you for any help or clue. I posted this as a different thread because my original post was in a resource profile thread for a different issue that was already answered.

*793365,*
After reading your post I tested an older layout of mine that uses a similar setup and it still operates fine. On the "Resource Usage Profile Options" box under the "Graph" tab, I have "Calculate Average" checked and "24" entered in the "Divide interval totals by:" box.
This allows my resource profile to display manhours per day for me.
Some of my background info:
I run in a multi-users platform and not in a stand alone setup.
We have different resources loaded into the schedule with multiple calendars.
I have several "Resource Filter/Group Names" setup for each separate resource on the "Data" tab too.
Hope this helps,

MEASUREMENTS IN ACTIVITY USAGE PROFILE

Please see enclosed link 'printscreen', how is it possible to see, in the Activity Usage Profile, the measurements (hours or manpower,etc.) in the chart blocks,
specific per month?
And P6 does not show the actual hours + curve (actual progress till January 2011)
Thanks in advance for your response, regards,
WP
Edited by: WP Hertel on 18-jan-2011 12:09
Edited by: WP Hertel on 31-jan-2011 15:27

Modify your timescale to Month.
1. Right-click on the graph and select the Activity Usage Profile Options.
2. Click on the Graph Tab
3. Select the checkbox 'Calculate Average'
4. Select the 'hours' per month by typing them in (this won't work in P6 7.0 with no service pack). 173 hours is the default and this will convert the Axis to 'bodies'.
If you want to see exact numbers, double-click in the graph and a popup window will appear.
Regards,
Steve Clements

Resouce Usage Profile

In resource usage profile values on right and left horizontal lines are in hours like 800h is there any way to remove h , or can assign new value of our choice

Akhtar,
Go to Resource Usage Profile Options, then go to Graph tab and at the bottom left check calculate average.
Put divide total intervals = 1
and Unit of Measure as you like....m3, kg, No etc.
Note:
In P6v7 only, this option of calculating average is not working (Bug) and you must install P6v7 SP1, Service pack 1, available free from Oracle Support Knowledgebase.
Jawad
Novo Rail, Sydney

Not able to get the profile option value

Hi,
Not able to get the profile option value after i changed the new value in the application.
I am using fnd_global.apps_initialize to initialize the apps from PLSQL code to get the updated profile option value. But fnd_profile.value is not getting fetched the updated value. Still it is fetching the old one. I mean it is stored in database cache. Please any one let me know how to get the new value every time after i changed the value.
Thanks

What is the application release?
Is this a custom or seeded profile option?
Can you confirm that the value got changed from the application (query the profile option and verify the value)?
Can you reproduce the issue if you use an API to update this profile option as per (How to Change Profile Option Value Without Forms? [ID 943710.1])?
Thanks,
Hussein

To generate xml code in encoding as specified in system profile options

Hi,
i have a customer bug wherein the report page which is generated after a particular process, which is a .xml file, does not open because we have special characters which are not getting encoded properly!..
the probable solution to this would be to encode the .xml file in the encoding format specified in system profile options.
After the content generation the following code is used to generate the tags and the .xml page:
DBMS_XMLGEN.setRowSetTag(l_qryCtx,'INVOICE_SET');
DBMS_XMLGEN.setRowTag(l_qryCtx, 'INVOICE_RECORD');
DBMS_XMLGEN.setBindValue(l_qryCtx,'BATCH_ID', p_batch_id);
DBMS_XMLGEN.setBindValue(l_qryCtx,'SUPPLIER_ID', rec.supplier_id);
DBMS_XMLGEN.setBindValue(l_qryCtx,'SITE_ID', rec.site_id);
l_result_clob :=DBMS_XMLGEN.GETXML(l_qryCtx);
l_result_clob := substr(l_result_clob,instr(l_result_clob,'>')+1);
l_temp_invoice_count := DBMS_XMLGEN.getNumRowsProcessed(l_qryCtx);
l_invoice_count := l_invoice_count + l_temp_invoice_count;
DBMS_XMLGEN.closeContext(l_qryCtx);
clob_to_file(l_result_clob);
here we have a transaction type in portugese like Nota de Crédito
and the issue summary is as follows
It contains some foreign language symbols which are not encoded in UTF-8 format hence IE is showing the error. Even though in mozilla the file is completely opened but the same foreign language symbol is not shown. So the error exists in all the browsers.
can you please suggest how the encoding maybe done so as to avoid the above problem!...
and also how to include the encoding as per mentioned in the system profile options.

Hi,
>>>The XSD doesn't have any messages only simple and complex types - I can't seem to relate (via drag and drop) them to a data or message type to generate the required objects.
maybe it has some reference inside to some other types which you did not get?
if so you need to import into IR/ESR all files and put the correct reference (external archives)
this would be the proper way to get the file generated according to the xml schema
Regards,
Michal Krawczyk

How to track the User who has changed the System Profile Options

HI ,
The system profile options are changed by one User (Ex: XX123).
Here, the user XX123, he is not having any sys admin responsibilities .
He is having only I-proc responsibility attached .
Is there any chance to update the system profile options , through I-proc.

Pl post details of OS, database and EBS versions, along with which profile options have been changed.
AFAIK, IProc responsibilities do not have access to change profile options.
HTH
Srini

Dynamical change read only property of columns based on a profile option

Hi,
We are attempting to change a Oracle iProcurement(ShoppingCartPG) which has certain readonly columns by default.
However, we need to make these columns updateable based on a responsibility level profile option. The code goes something like this.
if readonly_profile_option = "TRUE"
{make columnA property = readonly}
else if readonly_profile_option = "FALSE"
{make columnA property = updateable}
I read the guide about switchers and it seems confusing (to me). So if someone can provide an example with some pseudocode that will be helpful.
Also, can I dynamically add an LOV to column A if readonly is false? Of course the LOV should be disabled if readonly.
Thanks a lot

Hi,
Thanks for the feedback.
Tapash,
Switchers definitely don't make sense.
Raffy,
Didn't know it was that simple. I always thought that the controller fires--> then the page renders --> then the VO attributes get poulated. Basing my understanding on this flow, I though that the bean properties can only be set in controllers and not in VOs(via SPEL). I'll try it tomorrow.
Aprreciate your comments on the following.
Our requirement is to make an Oracle seeded field(SupplierName in iProcurement) updateable and with an LOV . Oracle has seeded it as ReadOnly.
I have two options.
1. If I change the readonly property in jedeveloper(I cannot access it via personalization) and add SPEL that would be upgrade 'unsafe' customizing - I think.
2. So I thought I'll extend the controller, substitute it and use
messageLOVInputText SupplierNameBean=webbean.findChildRecursive("SupplierName");
if{profle=not_read_only)
{SupplierNameBean.setReadOnly(false)};
else
{SupplierNameBean.setReadOnly(true)};
This is more upgrade safe. I have talked to the iProc development team and they are fine with it.

Problem in BAPI for stock posting from quality inspection to unrestricted usage

Hi all,
I am using BAPI_GOODSMVT_CREATE for stock posting from quality inspection to unrestricted usage Stock against quality inspection lot(not by MB1B) using mvt type 321.The material doc gets created by the BAPI,but actual stock posting is not taking place ie.the stock doesn’t get reflected in QA33/32 and QA11 also .Can any one suggest what must be wrong?The inputs given are as follows:
GOODSMVT_HEADER:
PSTNG_DATE =30/07/2014, DOC_DATE = 30/07/2014, REF_DOC_NO = INSP LOT NO.
GOODSMVT_CODE:
GM_CODE: ‘04’ .
GOODSMVT_ITEM:
MATERIAL = MATERIAL NO
PLANT = PLANTCODE
STGE_LOC = ‘WIP’
BATCH = BATCHNO
MOVE_TYPE = ‘321’
ENTRY_QNT = 100
ENTRY_UOM = ‘EA’
ORDERID = Prd ord no.
After executing this I used BAPI_TRANSACTION_COMMIT also. I am able to see the posted qty in MMBE,but it is not reflecting in QA11/33/32.
Kindly help me.

Hi Naveen,
Thanks for the reply. Even after using FM QAVE_PROCESS_AUTO_UD,when i execute
BAPI_GOODSMVT_CREATE, the same thing is happening.I am unable to see the stock deducted in QA33.
Is there any input in the goods mvt bapi where we can provide inspection lot no since i believe that the goods mvt has to get connected with the inspection lot.

Setting profile option values using Java Concurrent Program

Hi,
I have a java concurrent program in which i am trying to update a profile option which is enabled only at site level, but the values are not getting committed once the CP completes.
1. I am using CpContext.getProfileStore().SetProfile(<name>,<value>) to set the value.
2. I am printing CpContext.getProfileStore().getProfile(<name>) in the same run and this works.
3. BUt once the CP completes, the values are gone. Seems we have to issue a commit.
3. So i used CpContext.getJDBCConnection().commit; Even this doesn't commit.
Pls. suggest. Has anyone used these APIs to update profile options?
Thanks,
Suresh.

I am not not a java expert, but pl see if MOS Docs 305710.1 (A SAMPLE JAVA CONCURRENT PROGRAM) and 827563.1 (How To Create a Java Concurrent Program?) can help
HTH
Srini

Applications Start Page Profile Option Causing Issues

Hello Oracle Gurus,
I'm having an issue in a 12.1.3 instance that I think may be related to the "Applications Start Page" profile option.
For testing purposes, we set the profile to a specific Self-Service page at the Site level. We eventually removed the Site level profile and added it at the user level just for specific users, but since the Site-level profile was set, every time we click the Home link in the upper right-hand navigation, we get an "unexpected error." If we attempt to log in as a user that does not have the Applications Start Page profile defined, we also get an unexpected error.
After getting the error using either of the methods listed above, if we then try to navigate back to the login page, the instance throws a 500 Internal Error.
If we close the browser and navigate to the instance again, we're able to log in without any issues with user accounts that have an Applications Start Page profile defined.
Our "Self Service Personal Framework Mode" is set to "Framework Only" at the site level.
Bouncing Apache seems to resolve the issue temporarily, but then it comes back again a few hours later...
We've opened a Service Request, but has anyone else run into this before / have any ideas on how to fix it?
Here are some related Metalink notes from 11.5.10:
729375.1 (About the Applications Start Page profile option)
331814.1 (Error on Personal Home Page when returning to 'Home' link)
Thanks!
Anne

The issue is not specific to a responsibility or application.
Here is the error:
Fatal NI connect error 12170.
VERSION INFORMATION:
     TNS for Linux: Version 11.1.0.7.0 - Production
     Unix Domain Socket IPC NT Protocol Adaptor for Linux: Version 11.1.0.7.0 - Production
     Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
     TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
Time: 27-JAN-2011 09:46:02
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 110
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=172.30.31.107)(PORT=1502))
Thu Jan 27 09:53:30 2011
Incremental checkpoint up to RBA [0x42.e3635.0], current log tail at RBA [0x42.e37e1.0]
Thu Jan 27 10:13:31 2011
Incremental checkpoint up to RBA [0x42.e602b.0], current log tail at RBA [0x42.e6146.0]
Thu Jan 27 10:33:33 2011
Incremental checkpoint up to RBA [0x42.e7bc9.0], current log tail at RBA [0x42.e7d51.0]
Thu Jan 27 10:53:35 2011
Incremental checkpoint up to RBA [0x42.e995f.0], current log tail at RBA [0x42.e9ac9.0]
Thu Jan 27 11:13:37 2011
Incremental checkpoint up to RBA [0x42.ec163.0], current log tail at RBA [0x42.ec3f7.0]
Thu Jan 27 11:23:48 2011
Starting background process CJQ0
Thu Jan 27 11:23:48 2011
CJQ0 started with pid=8, OS id=17239
Thu Jan 27 11:33:39 2011
Incremental checkpoint up to RBA [0x42.ee08f.0], current log tail at RBA [0x42.ee216.0]
Thu Jan 27 11:53:41 2011
Incremental checkpoint up to RBA [0x42.efd07.0], current log tail at RBA [0x42.eff13.0]
Thu Jan 27 11:54:02 2011
Stopping background process CJQ0
Thu Jan 27 12:13:43 2011
Incremental checkpoint up to RBA [0x42.f25c0.0], current log tail at RBA [0x42.f2e4b.0]
Thu Jan 27 12:33:45 2011
Incremental checkpoint up to RBA [0x42.f4cae.0], current log tail at RBA [0x42.f4e4b.0]
Thu Jan 27 12:53:47 2011
Incremental checkpoint up to RBA [0x42.f6e8a.0], current log tail at RBA [0x42.f6fb7.0]
Thu Jan 27 13:13:50 2011
Incremental checkpoint up to RBA [0x42.fa3d0.0], current log tail at RBA [0x42.fa845.0]
Thu Jan 27 13:33:52 2011
Incremental checkpoint up to RBA [0x42.fc7d9.0], current log tail at RBA [0x42.fc989.0]
Thu Jan 27 13:53:55 2011
Incremental checkpoint up to RBA [0x42.fed4e.0], current log tail at RBA [0x42.ff12e.0]

Query or Profile Option to find Current logged in user in oracle apps R12

Query or Profile Option to find Current logged in user in oracle apps R12.
I want to get value of current user who is logged in to that particular session, based on the value of user_id or user_name returned i have to do a Forms Personalization.
Plz help.
Regards,
Sadiya P.

Hi Sadiya,
do you have the answer for this? please send it to me because i am also have same requirement. so plz post it here....

Receiving Error : Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables. while trying to create a new Customer.

Hi All,
We have set up a new Operating Unit in Oracle Apps. Now when I am trying to create a new Customer in that Operating Unit, I am receiving following error:
ERROR MESSAGE:-Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables.
We do have MO: Operating Unit and MO: Default Operating Unit set properly at Responsibility level for the Responsibility through which I am accessing this form.
Your help is appreciated!
Thanks in advance,
SKA

You can refer this thread and check your MO operating unit is set or not https://community.oracle.com/message/3937028 thanks

Item Validation Organization is not Appearing in LOV in profile options

Dear All,
Item Validation Organization is not Appearing in LOV of the Profile options.
OE: Item Validation Organization
QP : Item Validation Organization
Regards,
John

Hi,
Enable profile 'FND: Personalization Seeding Mode', clear the cache and check if this solves your problem.
--Sushant

Unrestricted usage profile option

Similar Messages

Maybe you are looking for