Unsble to connect 2 laptops wirelessly to Rouger wrt54GS

If one laptop connects then the other won't. It seems only one can connect at once. I tried disabling encryption and no go, tried dhcp on and off and assigning ip manually an no go. If one is connected, the other will not connected.
Upgraded firmware and same thing... Any idea ??

It seems that your having problem on your IP address assignment. Your laptops are both using "obtain an IP address automatically" that why you cannot use your wireless internet at the same time using your two laptops. try to configure the WLAN settings on your laptops and assign different IP for both of them... your routers IP address is 192.168.1.1 by default setting of your router... try to assign your first laptop's IP to 192.168.1.2 and the other is 192.168.1.3 both of your laptops will use the same "subnet mask: 255.255.255.0", "default gateway: 192.168.1.1" and "prefered DNS server:192.168.1.1" this will irradicate the conflict on your connectivity...

Similar Messages

Connecting XP laptop wirelessly to AEBS

Hi,
I'm having trouble connecting my laptop running Windows XP to an AEBS that connects well to my iMac desktop (via ethernet cable) and my Powerbook laptop (wirelessly).
I've been able to get a signal with full strength using WPA2 Personal from the AEBS, and using WPA-PSK and TKIP on my XP machine, but still can't connect to the internet.
I tried following the directions on iFelix, and switching over to WEP but was still not successful.
Any help would be greatly appreciated.
Thanks,
Milo

See if it is an encryption issue, turn off all encryption temporarily and see if you can now connect.
This will determine if it is an encryption issue or something else.
Does the XP laptop get a valid IP address or is it a self-assigned address as in 169.x.x.x or similar?
iFelix

Unable to connect on laptop wirelessly

I can't connect to the internet on my laptop but I'm able to when I don't turn on any wireless security. When I set as WPA/WPA2 security then I can't connect to my network on my laptop wirelessly. I'm using a WRT160n v3 linksys router.
Message Edited by klyy on 01-02-2010 04:01 PM

If you are using Win XP, you will need SP3 to run WPA2 ( = WPA with AES). Vista already runs WPA2.
Next, in the router, give your network a new unique SSID. Do not use "linksys". Do not use your old SSID. If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
Next, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Delete any network with your old SSID. Also delete any network that you do not recognize, or that you no longer use. Then enter your new network info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings". Reboot computer. Your computer should connect automatically to your router (it can take up to 2 minutes). If you still have trouble, temporarily turn off your computer software firewall and try again to connect.
If the above does not fix your problem, download and install the latest driver for your computer's wireless adapter.
Some users have reported improved wireless performance by switching to WPA encryption.
Note:
For WEP, enter WEP "key 1" (found in the router) into your computer, not the WEP password or passphrase.
For WPA or WPA2, enter the key (sometimes called password or passphrase) into your computer.

Can no longer connect to internet wirelessly with Linksys WRT54G...

Hi, all...
I'm at my father-in-law's house. His home network setup is as follows:
* Compaq desktop connected via Ethernet cable to
* Linksys WRT54G, v3 (IP 192.168.2.1) connected via Ethernet cable to
* Westell DSL modem provided by SouthEast Telephone (his ISP - IP 192.168.1.1)
I set this equipment up for him about 18 months ago. His Compaq desktop connects perfectly to the internet, using the setup I described above, which I set up for him about 18 months ago. I *used* to be able to connect to the internet wirelessly (with both my IBM ThinkPad and my MacBook; my bro-in-law *used* to be able to connect to the internet wireless (with his Dell laptop).
For reasons we don't yet understand, neither of us can connect wirelessly to the internet any longer. I have called Linksys, posted to their board, and read other threads here, so I am aware that MacBooks have some issues with Linksys routers. I'm getting ready to phone my father-in-law's ISP, to see if they can help.
But... I don't understand why this used to work, but doesn't any longer. I would be very grateful for any help any of you great folks could provide, and I will gladly post here any detailed info on the setup that might be of help!
Many thanks,
Bill J.
MacBook 2.0 Mac OS X (10.4.8) iMac 17in Core 2 Duo 2.0, AirPort Extreme, AirPort Express, IBM NetVista M42

Thanks for your reply.
Actually the Linksys 2Wire modem works fine in OSX and when connecting via a Compaq PC I also have in the house. It is just on the MacBook running XP that it fails to "connect". XP see's the network but cannot connect.
Also, I downloaded again bootcamp and created a fresh driver CD, reinstalled the driver and received the same error: 1706 No valid source could be found for product Macintoish Drivers foir Windows XP.msi.
I looked at the directory on the CD and it appears that there are no driver files, only documentation.
I called Apple, got no help, called Microsoft, spent 1.5 hours talking to them
they were no help either.
I sent a messge to the bootcamp beta mail address informing them that it seems the drivers are not being downloaded with bootcamp.
Thx again.

Officejet J6450 will NOT connect to laptop wirelessly - PLEASE HELP...

Good afternoon,
I just spent almost two hours on the phone with a woman from the HP Tech Support team that I could barely understand (not exaggerating - would be wonderful to bring back customer service to the US - god knows we need some more jobs here!!). She had me do a number of things, none of which solved my problem - needless to say, it was a very frustrating two hours and now I am very frustrated!
My issue is that my laptop will not recognize the wireless Officejet J6450. I have Comcast broadband cable internet, a Linksys wireless router, an HP desktop, and a Dell laptop (laptop is from employer - I work from home). I loaded all of the software on my desktop first (connected via USB) and everything worked perfectly. I used the Network Setup Wizard on the printer and connected to my Linksys wireless router with no issue whatsoever (full signal strength). I printed a wireless netwok report - no problems were found - all diagnostic tests were a success. The ethernet adapter wireless network connection IP address on my laptop is 192.168.1.102 and the IP address of the printer is 192.168.1.103. So then I proceeded to load the software to my laptop for wireless connection - thinking all along how easy getting everything set up has been. I then loaded the software to the laptop and I got to the part where it asks what type of connection I want to set up. I chose wireless and it asked me to temporarily plug the laptop to the printer via USB cable. I did so and it began searching for my wireless network. I selected my wireless network and it began searching for my printer. This is were I hit the brick wall - it could not find my printer. I tried again - chose my network, tried to find the printer - no such luck.
I then did a Google search and checked these boards regarding alternative solutions. I tried installing through Windows printers (BTW - laptop is running XP SP2). Selected Local Printer, unchecked the automatically select box, chose standard TCP/IP, etc. - that didn't work either.
I consider myself fairly PC savvy and I am perplexed by this - just doesn't make any sense why the laptop won't detect the wireless printer.
I would greatly appreciate any guidance regarding my connectivity issue as I do NOT want to call HP Tech Support back.
One other thing, the Tech Support lady told me to reset the printer by turning it off and then having me press the pound button and the number 6 before turning it back on. Not sure why she had me do this, but it reset the ink cartridges and alignment and now the printer no longer reports how much ink is left. Any way to fix that?
Lastly, out of curiosity, why does HP recommend not leaving the wireless enabled on the printer when not using it? Doesn't make any sense to have to turn off wireless everytime after printing and then turn it back on when needing to print again.
Sorry for this long post - hopefully this is enough information for you to help me out.
Thanks in advance!
Jeremy

Hi Jeremy,
First, I have no idea why we are recommending turning off the printer's radio when you are not using it. The only thing I can image is that if you leave the radio on and in its default configuration (SSID = hpsetup, no security, Ad-Hoc), then you are susceptible to neighbors or war-drivers using your printer.
Next, you have an interesting problem. You've done everything I would have tried (check connectivity by browsing the printer's internal web page, turn off the firewall, try to manually add the printer).
I know you've disabled the firewall. I might recommend uninstalling the firewall temporarily, then installing the SW again to see if that works. Also, you might check to see that you don't have another firewall accidentally enabled (maybe the Windows firewall?).
Finally -- is there anything unusual about your wireless-router configuration? Have you set any port-forwarding or other advanced settings? BTW -- what model wireless-router are you running?
And of course there's a rather painful step to try that usually works: reinstall the OS on your laptop and then install the printer SW (I'm somewhat embarrassed to suggest this but it does seem to work).
Message Edited by Wi-Fi-Guy on 02-20-2009 09:12 PM
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Trying to connect second laptop wirelessly but can only use numbers in password field

I've connected my Mac and another PC to my Valet Plus with no trouble. The third PC, running Windows XP, can only be connected as a guest. When trying to connect to this laptop to the home network, the password will only accept numbers.
I've tried changing the PC's security settings, disabling the firewall, etc. Has anyone experienced this problem?

What is the service pack on your computer?
If it is windows XP service pack 1 then I think you will need to upgrade the OS to SP3. Because SP1 will not support WPA/WPA2 security mode.
When you install the router using Cisco connect, the wireless security on the router will be WPA/WPA2.

Trying to connect another laptop wireless,have ???

I get so far,and when it wants a security key,or passphrase, I don't know what I need to put in? Am I making sense it's the last thingI do before I connect to the internet. Hope you can understand me. LOL... TY
TIA...
Oh, What is a ISP?, I have tryed every number I can find, nothing works,says it's wrong.
Message Edited by CountryGirl2 on 07-15-2007 03:13 PM

Hey there CountryGirl2!
Let me start asking you for a few things first and probably we could make a solution out of your problem:
1. What's the model# of your router? Try to look underneath it and you'd see it below the Linksys label. ex. WRT54G v6.
2. Do you have any computer which is physically connected to the router and is able to get online?

WRT160N - Cannot connect to router wirelessly

I just bought the WRT160N and was able to run the setup on a wired computer and connect to the internet just fine. Now when I try to connect my laptops wirelessly, it does not even show my network as an option. I am going crazy! Please help...

Try this...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

We did that, but it just doesn't seem to be able to connect. So basically we tried to connect to our network and insert the password, but afterwards it does nothing. Weird thing is also that the network symbol (top right of the screen) says that it has been connected, but when I go look at the system preferences --> network, it states that it has not been connected

I have an airport extreme. i am trying to connect a laptop with windows 7 to a wireless printer, with no luck. any ideas?

I have an airport extreme. i am trying to connect a laptop with windows 7 to a wireless printer, with no luck. any ideas?

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

My ipod was connecting to my home wi-fi just fine until I uploaded new music from my Itunes on my laptop. Now my ipod and my iphone will not connect to my wireless network. I've tried resetting the network settings etc... Nothing seems to work. Help!

My ipod (version 6.1.3) was connectiong to my home wi-fi just fine until I uploaded new music from my itunes via my laptop. Now my ipod and my iphone will not connect to my wireless network. I've uplugged my wireless network and reset my network settings etc... nothing seems to work. Please help!

Does the iOS devices connect to other networks?
Does the iOS devices see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Since both iPhone and iPod stopped connecting I suspect a problem with your network.

Hi there can anyone help. I am connected to the internet by ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no internet connection. the other wireless laptop in my flat works well.

Hi there can anyone help. I am connected to the Internet by Ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no Internet connection. the other wireless laptop in my flat works well. Could the other wireless laptops being used in my flat be affecting my connection. what can I do to get connected, keep connected. Thanks for any ideas out there.

My network connected for a few hours then went back to timing out. I have not changed anything. However there four additional laptop users in my family who do not seem to be having any problems using their wireless connection. Could their film and music downloads be causing the timing out of my connection and if so is there a way I could prioritizes my computer or limit their use?

I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I can connect the laptops to the printer. Any advise?

I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I am not able to connect the laptops to the printer. Any advise?

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

How do i connect my laptop with my HP Photosmart C6180 Wireless

Hello, I need help.
I need to connect my HP C6180 All in One Printer with my laptop wireless.
I whent and follow the wizard on the printer and it says it's wireless now but when i click print from my laptop it says it's offline. so how do i get my laptop to see my printer or what do i have to do?
Please, please help me.

Sure. Let's make sure you have covered everything first. Download the basic guide here.
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=1153494
Read it completely and follow the instructions to connect to your network. Keep careful notes if something goes wrong and let us know.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

My laptop continually tries to connect to HP3050 wireless even if I am not near the printer.

HP3050 wireless printer Samsung Laptop with Win 7 SP1
My laptop every minute or two runs a program in the background. I see an egg next to the mouse pointer. I used Process Explorer to establish that it is trying to connect to HP3050 wirelessly. This happens even if I am nowhere near the printer. It is very annoying and uses up computer resources. I have removed the printer for now and the problem is cured. How can I fix this and use the printer again?
[email protected]

Topgunb,
Try re-installing the latest version of the full feature software located here:
http://goo.gl/PTwdX
Let me know if the issue persists. Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Unsble to connect 2 laptops wirelessly to Rouger wrt54GS

Similar Messages

Maybe you are looking for