Unselect all the rows when display my table the first time
Hi all,
When I execute my webdynpro the first time my table is displayed with the first row selected, but this is false, this line is not selected.
If i execute the method get_selected_elements don't return anything in the table, but if i do a Click in this row then works fine.
I tried to unselect all the rows when i display the table the first time in the method WDDOINIT doing the following;
DATA lo_nd_my_table TYPE REF TO if_wd_context_node.
DATA: lt_elements TYPE wdr_context_element_set,
lo_element TYPE REF TO if_wd_context_element,
lo_node TYPE REF TO if_wd_context_node.
lo_nd_my_table = wd_context->get_child_node( name = wd_this->wdctx_my_table ).
lt_elements = lo_nd_my_table->get_elements( ).
LOOP AT lt_elements INTO lo_element.
lo_element->set_selected( SPACE ).
ENDLOOP.
But, doesn't work...
How can i do it?
Thanks in advance.
hi,Husalban RM .
You don't need to DE-SELECT each element of the context node.
You can try the following:
lo_node->set_lead_selection_index( -1 ).
"lo_node is the context node which is bound to your table.
Hope it can help you a little.
Best wishes.
Similar Messages
-
Is it possible to resize the row / column of a table at run time ?
Hello All ,
I want to make a table where the user have to put datas . But if some data exceeds the length of the column / row the user should have the ability to resize the column / row of the table just like we are able to do at the time of designing . Is it possible ??
Thanks .
Bibhu .Hi,
If you select a cell in the table that cannot receive data, then the expand to fit will not be available.
However if you select an object that is in the table (like a textfield) then the option of expand to fit should be available.
Try experimenting with the options.
Niall -
All photos in portrait format are displayed blurred in the preview mode "fill" of the library. In all other modes e.g. "fit"or "1:2" the photos are sharp. How can I change this, so that the photos are still sharp when displaying them in the mode "fill"? My Lightroom release is 5.7.1.
Thanking you in anticipation!I'd like to get all these '-1 suffix' files together with their associated Develop adjustments into one folder (if they aren't already) so I can see them in Grid view in the Library module, which I use as my basic starting point for everything else at this early stage of my Lightroom 'career'.
To see what folder these are stored in, right-click on a photo and select "Go to Folder in Library".
Advice: if you are going to use Lightroom effectively, you probably want to stop using folders as your method to create a grouping of photos that are already in Lightroom; there are plenty of built-in tools, such as keywords, collections, color labels, etc.
I don't understand why the search on the entire catalog picked up apparently the same two file versions but also got the Develop adjustments when going to the relevant Folder didn't show the adjustment black squares against each image in Grid view nor were they there when the images were opened in the Develop module. Perhaps if I understood this, I'd be a bit more confident of moving forward myself.
These are most likely different versions of the same photo, in different folders. Lightroom stores the edits in its own catalog, and so it knows that one folder's photos have edits, and the other folder's photos do not have edits. Please understand that Lightroom is a database, it knows where the photos are at the time you import them (or add them to the catalog by synchronize), and then if you move things around in your operating system, Lightroom does not know anything about that and problems begin. Thus the advice to organize using Lightroom tools and methods and not operating system tools and methods. -
dear all,
i have done a system copy from production server into quality server. quality was scrapped and freshly installed with SAP then used the DB flush method to carry out the system copy. i had to change the DBS_ORA_SCHEMA in environment variables to SAP<SOURCE SID> from SAPSR3. the sap version is ECC6.0,DB is ORACLE10.2 on WIN NT.
after MMC opened, i get "SQL error in the database when accessing a table" error is coming. in SM21, I am getting "Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000 )
Database error 8103 at SEL access to table TBTCO
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
Database error 8103 at FET access to table TBTCP
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130339 sibqty_Q TY_00 " generated
Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000
> Short dump "081018 130339 sibqty_Q TY_00 " generated
Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000
Delete session 001 after error 023
Database error 8103 at DEL access to table TMSALOGAR
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130432 sibqty_Q TY_00 " generated
Database error 8103 at FET access to table SNAP
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130432 sibqty_Q TY_00 " generated
Transaction Canceled SY 002 ( SQL error in the database when accessing a table. )
Database error 8103 at FET access to table TSP02"
please find the st22 DUMP:
ow to correct the error |
Database error text........: "ORA-08103: object no longer exists"
Internal call code.........: "[RSQL/READ/TBTCO ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPMSSY2" or "SAPMSSY2"
"INITIATE_JOB_START"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"INITIATE_JOB_START" "(FORM)", or its possible occurrence must be declared in
the
RAISING clause of the procedure.
|
please do me this favor if you know to avoid this problem..
thanks a lot..Hello Anuj,
This is because the COUNT(*) is returning a value which is longer than the INT4 data type it is expecting. If you restrict the selection by introducing a WHERE clause, then you won't get the dump:
DATA: dyn_from TYPE string,
dyn_where TYPE string,
gx_sql_err TYPE REF TO cx_sy_open_sql_error,
gv_text TYPE string.
dyn_from = `DD01L INNER JOIN DD02L ON DD02L~AS4LOCAL = DD01L~AS4LOCAL AND DD02L~AS4VERS = DD01L~AS4VERS`.
dyn_where = `DOMNAME LIKE 'Z%'`.
TRY .
SELECT COUNT(*) FROM (dyn_from) WHERE (dyn_where).
WRITE: / sy-dbcnt NO-GROUPING.
CATCH: cx_sy_open_sql_db INTO gx_sql_err,
cx_sy_dynamic_osql_semantics INTO gx_sql_err,
cx_sy_dynamic_osql_syntax INTO gx_sql_err.
ENDTRY.
IF gx_sql_err IS BOUND.
gv_text = gx_sql_err->get_text( ).
WRITE: / gv_text.
ENDIF.
BR,
Suhas -
Root cause of "SQL error in the database when accessing a table. "
Dear experts,
I meet this dump "SQL error in the database when accessing a table" when executing a sql.
Sql:
SELECT sesssessno poscrm_serplan_id poscrm_ser_h_id poscrm_ser_i_id
possolution_id sessbundle_id sessdbid sessinstno pos~crm_ordered_prod
sessdbid sessinstno
INTO CORRESPONDING FIELDS OF TABLE et_sess_list
FROM dsvassessadmin AS sess JOIN service_posn_sm AS pos
ON possession_id = sesssessno
FOR ALL ENTRIES IN lt_contractno
WHERE sess~contractno = lt_contractno-contract_no
AND sess~status IN lt_status_range
AND bundle_id IN lt_bundle_id
AND pos~solution_id GT 0
This sql works well in dev system SD7, however, it causes dump in another dev system "SMV".
Can anyone give me any ideas?
ThanksHi Jovito,
This is info from ST22
Short text
SQL error in the database when accessing a table.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
How to correct the error
Database error text........: "SQL0101N The statement is too long or too
complex. SQLSTATE=54001" Internal call code.........: "[RSQL/OPEN/DSVASSESSADMIN ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"CL_AGS_SERVICE_SERV===========CP" or "CL_AGS_SERVICE_SERV===========CM018"
"GET_OVS_SESSION_LIST"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"GET_OVS_SESSION_LIST" "(METHOD)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
It seems that after translation the native sql is too long. But I think this can be solved. -
Error when displaying - on table control
hy guys,
im working with a table control..
the problem is when the table control loads a -200 or any number with - .
ERROR
DYNPRO_FIELD_CONVERSION
I already tried to change the format of the table field to currency, dec, char and numc
currency the error is displayed.
dec the error is displayed
char the column is displayed empty
numc the table is displayed but the - is not displayed in the field.
any ideas?
Edited by: javier santana on Sep 7, 2008 7:26 PMHi,
The problem mayb with the -ve value display, keep the format to currency and double click on the field in table control, u wil find a option to display -ve values select that
If -ve value is ur prob then this should work -
Getting error "SQL error in the database when accessing a table."
Hi All,
We are getting Dump Error SQL error in the database when accessing a table for the batch job EISSD/REQUISITION 14 / which includes program AQ20FD==========A2============. Please reply. The Dump error details are as follows
Short text
SQL error in the database when accessing a table.
How to correct the error
Database error text........: "ORA-01555: snapshot too old: rollback segment
number 21 with name "_SYSSMU21$" too small"
Internal call code.........: "[RSQL/FTCH/VBRK ]"
Please check the entries in the system log (Transaction SM21).
Thanks
Padmakar Kudtarkar
Edited by: Rob Burbank on May 19, 2011 9:38 AMThe query where we are getting error in Standard program AQ20FD==========A2============ for Job
EISSD/REQUISITION 14 / is as follows:
select VBRKBUKRS VBRKFKART VBRKFKDAT VBRKFKTYP VBRKGJAHR VBRKKUNAG VBRKKUNRG VBRKKURRF VBRKVBELN VBRKWAERK VBRP~AUBEL
VBRPAUPOS VBRPFKIMG VBRPKVGR2 VBRPKZWI1 VBRPMATNR VBRPMWSBP VBRPNETWR VBRPPSTYV VBRPVBELN VBRPVGBEL VBRP~VGPOS
VBRPVKBUR VBRPVKGRP VBRPVRKME VBRPWAVWR
into (VBRK-BUKRS , VBRK-FKART , VBRK-FKDAT , VBRK-FKTYP , VBRK-GJAHR , VBRK-KUNAG , VBRK-KUNRG , VBRK-KURRF , VBRK-VBELN
, VBRK-WAERK , VBRP-AUBEL , VBRP-AUPOS , VBRP-FKIMG , VBRP-KVGR2 , VBRP-KZWI1 , VBRP-MATNR , VBRP-MWSBP , VBRP-NETWR
, VBRP-PSTYV , VBRP-VBELN , VBRP-VGBEL , VBRP-VGPOS , VBRP-VKBUR , VBRP-VKGRP , VBRP-VRKME , VBRP-WAVWR )
from ( VBRK
inner join VBRP
on VBRPVBELN = VBRKVBELN )
where VBRK~BUKRS in SP$00004
and VBRK~FKDAT in SP$00001
and VBRK~KUNAG in SP$00002
and VBRK~VBELN in SP$00006
and VBRP~MATNR in SP$00003.
%dbacc = %dbacc - 1.
if %dbacc = 0.
stop.
endif.
check SP$00004.
check SP$00001.
check SP$00002.
check SP$00006.
check SP$00003.
add 1 to %count-VBRK.
%linr-VBRK = '01'.
extract %fg01.
%ext-VBRP01 = 'X'.
extract %fgwrVBRP01.
endselect. -
Inbound-Queue SYSFAIL: SQL error in the database when accessing a table
Hi,
we send around 80 IDoc simultaneously, there 15 are stuck.
They all have SYSFAIL in SMQ2 with message: SQL error in the database when accessing a table
I already unlocked the queues and try to resend. Nothing happend!
I ran RSQIWKEX for the single queus but now there are new queues in Status SYSFAIL.
I already checked some entries in forum and blogs, but nothing worked out yet!
Can someone help?! it's urgent!!
brHi, well as mentioned i searched and found this already.
But in ST22 i got error concerning
Laufzeitfehler DBIF_RSQL_SQL_ERROR
Ausnahme CX_SY_OPEN_SQL_DB
So i guess it's something more serious.
Any more ideas?!
Can i simply delete the stucked queues and reporcess them?!
br -
SQL error in the database when accessing a table.
Hi,
I got below error at production server. Please suggest how to reslove this error.
<br>
<br>
<br>
Runtime Errors DBIF_RSQL_SQL_ERROR
<br>
Exception CX_SY_OPEN_SQL_DB
<br>
Date and Time 02.01.2011 15:55:06
<br>
<br>
<br>
<br>
<br>
Short text
<br>
SQL error in the database when accessing a table.
<br>
<br>
<br>
How to correct the error
<br>
Database error text........: "[10054] TCP Provider: An existing connection was
<br>
forcibly closed by the remote host.
<br>
[10054] Communication link failure"
<br>
Internal call code.........: "[RSQL/INSR/SWFCNTBUF ]"
<br>
Please check the entries in the system log (Transaction SM21).
<br>
<br>
If the error occures in a non-modified SAP program, you may be able to
<br>
find an interim solution in an SAP Note.
<br>
If you have access to SAP Notes, carry out a search with the following
<br>
keywords:
<br>
<br>
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
<br>
"CL_SWF_CNT_FACTORY_SHMEM======CP" or "CL_SWF_CNT_FACTORY_SHMEM======CM001"
<br>
| "ADD_INSTANCE"
<br>
<br>
<br>
Information on where terminated
<br>
Termination occurred in the ABAP program "CL_SWF_CNT_FACTORY_SHMEM======CP" -
<br>
in "ADD_INSTANCE".
<br>
The main program was "SAPMSSY1 ".
<br>
<br>
In the source code you have the termination point in line 16
<br>
of the (Include) program "CL_SWF_CNT_FACTORY_SHMEM======CM001".
<br>
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
<br>
procedure "ADD_INSTANCE" "(METHOD)", but it was neither handled locally nor
<br>
declared
<br>
in the RAISING clause of its signature.
<br>
<br>
The procedure is in program "CL_SWF_CNT_FACTORY_SHMEM======CP "; its source
<br>
code begins in line
<br>
1 of the (Include program "CL_SWF_CNT_FACTORY_SHMEM======CM001 ".
<br>
<br>
<br>
<br>
Source Code Extract
<br>
<br>
Line
SourceCde
<br>
<br>
1
METHOD add_instance .
<br>
2
<br>
3
data: ls_id type swfcntbuf.
<br>
4
<br>
5
check buffer method - store in local buffer if necessary
<br>
6
retcode = cl_swf_cnt_factory=>add_instance( ibf_por = ibf_por instance = instance ).
<br>
7
<br>
8
CHECK m_buffer_method EQ mc_buffer_shared.
<br>
9
<br>
10
append key to list of tasks to add stored in database table SWFCNTBUF
<br>
11
will be evaluated by build process for shared memory area (UPDATE_BUFFER method)
<br>
12
<br>
13
ls_id-mandt = sy-mandt.
<br>
14
ls_id-id = ibf_por.
<br>
15
<br>
>>>>>
INSERT swfcntbuf CONNECTION r/3*wfcontainer
<br>
17
FROM ls_id.
<br>
18
<br>
19
IF sy-subrc EQ 0.
<br>
20
Commit seems to be necessary always, even if INSERT has failed, to get rid of
<br>
21
database locks
<br>
22
COMMIT CONNECTION r/3*wfcontainer.
<br>
23
ENDIF.
<br>
24
<br>
25
ENDMETHOD.
<br>duplicate here SQL error in the database when accessing a table.
Do not post the same question in more than on forum. -
DBIF_RSQL_SQL_ERROR: SQL error in the database when accessing a table
Hi Gurus,
Im getting DBIF_RSQL_SQL_ERROR: SQL error in the database when accessing a table error while I was importing support pack in the system. This is ERP 6.0 with EHP4 with MS SQL in back ground and I was applying the BASIS SP 04. It was in the TEST scenario and in the SPDD_SPAU_CHECK phase it threw the error.
Short text
SQL error in the database when accessing a table.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
How to correct the error
Database error text........: "[601] Could not continue scan with NOLOCK due to
data movement."
Internal call code.........: "[RSQL/FTCH/E071 ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPLSVRT" or "LSVRTU01"
"TR_LAST_IMPORT_OF_OBJECT"
SPAM is ending with the above short dump. I have checked the space availability and it is OK.
Kindly help.
Renju Aravind.Hi,
this error is very often seen in case of a database corruptions. Please follow note 142731 and perform a complete database check. Send the results when they show errors.
Best regards
Clas -
Create an internal table with the rows of another internal table.
Hi I want to know if posible to create an internal table structure with the rows of another internal table?
ex.
If in i_tab column A has this values: row 1 = first, row 2 = second, row 3 = third.
Now I want that the structure of my internal table be: first, second, thirdHi,
If you do this way then what will be the difference between the two table anyway?? First internal table has the same structure irrespective of which row you select. and you are going to store the data from each row to the rows of the second internal table. In that case, the structure of the internal table is the same as first table. and it would have same rows.
Am I missing something here? or you want to declare the internal table with each field being the structure of the first table? In this case you'd have to do a dynamic declaration of data as the first table can have any no of rows then the second table would have any no of fields in the structure.
Now if you know that your first internal table is going to have a fixed no of rows eg 3 rows then it becomes simple. Do the following then
Data: begin of second_table occurs 0,
first type <first_table type>,
second type <first_table type>,
third type <first_table type>,
end of second_table.
Regards
Prasenjit -
I want to change the email address to which all the reset security information (emails) go to. But I cannot see that email address in the list when I click on the 'Name, ID and Email Addresses' section.
How can I change it when I cannot view it on my account. I am not even sure how this got setup.If you mean your rescue email address, it's in the Passwords and Security section, after you answer the two security questions.
-
C4780, The Control Panel Display Freezes on the HP Logo when Connecting to a Wireless Network
this is my second c4780 i have tried to connect wirelessly to my imac, every time i get to the wireless part of the set up process my network is the strongest in the list but it cant seem to connect and when i go to retry it then it tells me the device cannot be found and that i need to connect it via usb when it already is connected and then the Control Panel Display Freezes on the HP Logo, and i cant get it unfrozen. I would really like this printer to work wirelessly so i don't have to go back to the apple store again and return it. Any help is greatly appreciated, thanks
Worked great!!!!!!!!!!!!!!!!!!!! thank you so much i was about ready to throw it out the window
-
Getting the row id from a table
Hi
I have a dynamic table that sets a uniquie id number to each.
<TR id="1"> </TR>
<TR id="2"> </TR>
etc...
I want to be able to click on a row and detect what this id is in JSP.
Can this be done?? If so how?
Thanks in advanceI suppose the ID is dynamically create too.
If you need the row's clicked ID in the same page you can do like follow.
If you must send the selected ID to JSP, Servlet, EJB... you can create an hidden field and set its value with this ID... then post it to server..
I would make in this way...
<html>
<head>
<script language="Javascript">
function showID(whatID){
alert(whatID);
//You can also set the value of an hidden field
</script>
</head>
<body>
<table>
<tr id="1" onclick="javascript:showID('1')">...</tr>
<tr id="2" onclick="javascript:showID('2')">...</tr>
<tr id="n" onclick="javascript:showID('n')">...</tr>
</table>
</body>
</html>
I hope be useful. -
How to computer the row size of a table
Hi
How can i compute the row size of a table. My general Idea is
create table emp(
empno number(4),
ename varchar2(10),
hire_date date,
update_yn timestamp);
the character set is UFT8
how can i compute the size of this table
thanksHi,
for Avg. row length see this
SQL> desc dba_tables
Name Null? Type
OWNER NOT NULL VARCHAR2(30)
TABLE_NAME NOT NULL VARCHAR2(30)
TABLESPACE_NAME VARCHAR2(30)
CLUSTER_NAME VARCHAR2(30)
IOT_NAME VARCHAR2(30)
PCT_FREE NUMBER
PCT_USED NUMBER
INI_TRANS NUMBER
MAX_TRANS NUMBER
INITIAL_EXTENT NUMBER
NEXT_EXTENT NUMBER
MIN_EXTENTS NUMBER
MAX_EXTENTS NUMBER
PCT_INCREASE NUMBER
FREELISTS NUMBER
FREELIST_GROUPS NUMBER
LOGGING VARCHAR2(3)
BACKED_UP VARCHAR2(1)
NUM_ROWS NUMBER
BLOCKS NUMBER
EMPTY_BLOCKS NUMBER
AVG_SPACE NUMBER
CHAIN_CNT NUMBER
AVG_ROW_LEN NUMBER
AVG_SPACE_FREELIST_BLOCKS NUMBER
NUM_FREELIST_BLOCKS NUMBER
DEGREE VARCHAR2(10)
INSTANCES VARCHAR2(10)
CACHE VARCHAR2(5)
TABLE_LOCK VARCHAR2(8)
SAMPLE_SIZE NUMBER
LAST_ANALYZED DATE
PARTITIONED VARCHAR2(3)
IOT_TYPE VARCHAR2(12)
TEMPORARY VARCHAR2(1)
SECONDARY VARCHAR2(1)
NESTED VARCHAR2(3)
BUFFER_POOL VARCHAR2(7)
ROW_MOVEMENT VARCHAR2(8)
GLOBAL_STATS VARCHAR2(3)
USER_STATS VARCHAR2(3)
DURATION VARCHAR2(15)
SKIP_CORRUPT VARCHAR2(8)
MONITORING VARCHAR2(3)
CLUSTER_OWNER VARCHAR2(30)
DEPENDENCIES VARCHAR2(8)
SQL> Regards!
Maybe you are looking for
-
How to set a default tabular form value?
I am trying to set a default value for a tabular form. In Tabular Form Element: ======================== Display as: Date Picker Formet: Date Picker (DD-MON-RR) Default Type: Item (application or page item name) Default P2_DATE My item P2_DATE is set
-
Hi, In PO release startegy, Plant- XXXX YYYY BLANK Purchase group, Total net order value, order type are the characteristics currently defined. PO is created at company code level..with multiple plants-i mean, XXXX, YYYY. rekease
-
User Exit or BADI for MIRO after save
Hi I want to show a message in MIRO once the invoice document is create but I am unable to find a user exit or BADI after save of the MIRO transaction. Please guide me in this aspect. Regards
-
Cannot uninstall, repair, or reinstall Adobe Reader
I think this suddenly happened a few days ago (no clue what the cause is), but since then no pdf files would have that pdf icon, they've all returned to the ugly "general file" icon, though it could still be opened with Adobe Reader. I have version 9
-
Cann't find ldap_gen_profile command on Solaris 9
Hi all, I installed Directory server 5.2 at Solairs 9(Intel). But I cann't find the ldap_gen_profile command. Any idea? thanks