Unsent message do not show in outbox

when the sending progress bar is on and the messages are nto going out , there is no outbox to check whcih ones are pending .
Message was edited by: [email protected]

Did you accidentally Hide them?  So they don't show in the event  - look for option to un-hide photos
I know its there just don't want to open Iphoto while I am on-line as it persists in connecting to apple and I only use it off-line.

Similar Messages

  • I am trying to read my iMessages from my iPhone 4S on my iPad 2, but the messages do not show up on my iPad 2. I made sure that the receiving email address is the same on both devices and both are signed into my single Apple account.

    I am trying to read my iMessages from my iPhone 4S on my iPad 2, but the messages do not show up on my iPad 2. I made sure that the receiving email address is the same on both devices and both are signed into my single Apple account.

    Is it possible that the person who sent the message to your phone sent it to your phone # instead?  Try sending a message to your phone via the email address and see if it shows up on the iPad.

  • Anybody having problems in Mail when sending reply messages from a thread and the message is not showing in the Sent mailbox?

    Hello Folks;
    Got a weird one...
    I am sending replies from a thread in Mail and they seem to have been sent (sounds) but they don't show in the Sent mailbox... O-0 These messages seem to have been delivered to cyberspace as they don't show in my Sent mailbox on my IMAP server... This has been happening for the last month... I have checked and verified all of my IMAP settings and Mailbox behavior settings... This is really weird and maybe a bug.... I checked all of my other clients that have access to the server on the same account and these messages do not show there either.... Any ideas?
    --prd54usa

    The messages are getting to the recipient...
    I am on a Comcast IMAP server if this has anything to do with it and the server settings are following the correct server port numbers, SSL settings, etc... I save Sent messages on the IMAP server for 90 days.... None of these "disappearing" messages were on the server for more than a couple of days.. Typically, these messages will get 'hung' in the Outgoing Mailbox for @30 seconds before sending... like they are being scanned for viruses or Mail can't connect to the server all of a sudden...
    I anybody else here is on a Comcast IMAP server, and having this problem of disappearing Sent messages... This would tell us that it might be a Mail Provider issue with their outgoing server...
    --prd54usa

  • Messages are not showing in the SXMB_MONI

    Hi...All,
    we are doing FILE-RFC synchronous scenario with out BPM, in the communication channel monitoring it was showing success, but in File server file is not coming to target side from sender, messages also not showing in the SXMB_MONI.
    how can i solve these issues, pls suggest me...
    thanks in advance,
    Jain.

    Hi,
    Please follow the steps below to see the synchronous messages in sxmb_moni
    Step 1. Go to transaction SXMB_ADM
    Step 2. Click on Integration engine configuration
    Step 3.Go to Edit - Change specific configuration data
    Step 4. Add the paramaters:
    LOGGING and LOGGING_SYNC category RUNTIME current value = 1 (active)
    PS: You can also set TRACE_LEVEL to 3 so that all processing steps and details will be logged.
    Reward points if answer is useful.
    Thanks
    Amit

  • How do I set up phone so that messages do not show up in window

    How do I set up my 5S so that text messages do not show up on the screen, just so it shows who sent the message.

    Settings>Notification Center>Messages>Show in Lock Screen>Off>Show Preview>Off.

  • Missing emails, is any one else finding message are not showing up in email

    missing emails, is any one else finding message are not showing up in email

    Hi
    Yes I have the same problem
    Started a new hotmail account, have 5 or 6 emails in it in different folders, I could see them in the folders yesterday - today I go to the folders and they are not showing :-(
    I've checked by using safari and going into the account and they're there, I've tried deleting the email account from the iPad restarting and creating again - iPad won't load them.
    Has anyone got any ideas?
    I've also tried changing settings but nothing.
    Bob

  • Error message balloon not showing after JDeveloper 11.1.1.2 upgrade

    Hello
    We recently upgraded to JDeveloper 11.1.1.2 from 11.1.1.1.
    The error message balloon for invalid items does not automatically appear anymore like it did in the 11.1.1.1 version. The item is outlined with red, indicating an error; however the user has to navigate the cursor on that field to get the error message balloon to show up.
    Is there anything that I can do to so that error message balloon appears automatically when an error occurs?
    Thanks,
    Spiro

    Never got this issue resolved.
    I came up with a JavaScript walkaround:
    * Navgate the cursor to the error item
    function goToErrorItem()
    var clientIds = AdfPage.PAGE.getClientIdsWithMessages();
    if (clientIds.length == 1)
    if (clientIds[0] != null)
    var item = AdfPage.PAGE.findComponent(clientIds[0]);
    AdfFocusUtils.focusElementDelayed(item,10);
    in the backing bean:
    operationBinding = this.getBindings().getOperationBinding("something");
    result = operationBinding.execute();
    if (!operationBinding.getErrors().isEmpty())
    gotoErrorItem();
    * Navigate the cursor to the item that errored out
    private void gotoErrorItem()
    FacesContext context = FacesContext.getCurrentInstance();
    ExtendedRenderKitService erks = Service.getService(context.getRenderKit(), ExtendedRenderKitService.class);
    erks.addScript(context, "goToErrorItem();");
    }

  • Sent messages do not show in "sent messages" on slow connections

    I am temporarily on a very slow internet connection. It sometimes takes several tries to sent an email over the connection provided by the hospital I am currently in. Frequently sending times out and I have to restart the try.
    Some of the emails sent do not show up under sent messages, so I do not have any carbon copy on my side, which is sometimes dangereous as there are some company mails.
    Mail is using an IMAP account at Hosteurope, so the question is - is there a timeout proble with IMAP resulting in emails not copied to the sent messages box after retried sends?

    dont have access to slow line any longer, so cannot work on a solution

  • Messages are not showing in the moni

    hi.....
    i am doing rfc - soap scenario, in the sender communication channel monitoring it was showing success, in the receiver communication channel monitoring it was showing status is Yellow colour (Channel Started but inactive) and not found any messages in SXMB_MONI.
    pls suggest me how can i rectify this type error...
    regards,
    Pasi

    Hi,
    Hi,
    Here you need to set the Trace level for SXMB_MONi
    switch the logging and the trace on. SXMB_ADM, conf integration engine, Parameter RUNTIME: LOGGING, LOGGING_SYNC, TRACE
    Follow below steps
    Goto SXMB_ADM--->Integration Engine configuration -
    >Specific Configuration ---> Set the LOGGING & LOGGING_SYNC current value as 1.
    RUNTIME LOGGING 1
    RUNTIME TRACE_LEVEL 3
    Normally with Quality or Production these kind of settings are maintained to avoid the unwanted logs in SXMB_MONI.
    Refer
    /people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
    Can not able to see message in sxmb_moni
    Message not showing in sxmb_moni
    No messages available for selection in SXMB_MONI
    No XML-Message in SXMB_MONI
    Regards,
    Swati

  • After transfer mail to new computer new message content not showing in view mode

    I've been transferring data from OSX mavericks Macbook pro to imac using airdrop (migration assistant wasn't working).
    Wanted to duplicate mail from macbook so followed instructions for transferring as below
    http://www.macworld.com/article/1166999/transfer_email_from_one_mac_to_another.h tml
    Mail transfer worked great but my new messages aren't showing the content in the view area.
    I can get the new message blurb in the list but nothing in full viewing.
    The com.apple.mail.plist file actually was a plist.lockfile so not sure if that made a difference
    Plus, I did transfer the com.apple.mail-shared.plist as well. The older versions are on my desktop.
    The account names are different from one computer to the other but they show up as read-write on new computer files. I even added an administrator with read write priveleges on those files just incase. Nada.
    Any thoughts?

    Rebuild the mailboxes.

  • My apple mail flagged messages are not showing up in the flagged folder.

    my apple mail flagged messages not showing up in the flagged folder ?

    All messages finally appeared in "Sent" in Mail.app. But it sure took some time.
    Guess there is a severe lag time between .Mac and Mail.app?

  • My old messages do not show on my new iphone 6.

    I am able to send new messages and they show in the log but none of my old messages show anymore. I just moved from my old faithful iPhone 4s to the iPhone 6.

    Try to restore your iphone via iTunes or update to ios6.1.2.
    If itunes gives an error with restoring (DFU/Recovery or just normal)
    try this:
    open your computer and search on windows; C://windows/system32/drivers/etc/hosts
    open up the hosts file in note pad you will see IP adresses and more add another line and put in this:
    #74.208.10.249 gs.apple.com
    this is a by-pass to the cydia/saurik restore server, it has nothing to do with jailbreaking over voiding apple's warranty
    let me know if succeeded!

  • HT3529 Messages does not show Add Contact

    Using iPhone 4S with iOS8. When I touch Details in a message, it does not show the Add Contact, and does not allow to change the name of a group.
    Is this down to it being on the 4S?

    HI,
    iChat and Messages can Display the pics that are in the Contacts/Address book list.
    If you have  Chat window is open in iChat  then the View Menu Show Buddy Pics is the first port of call.
    For Messages and iChat the next is the View Menu > Messages > Show Buddy Pics and Names.
    The Show Pics and Names items also works for Buddy list in either app.
    For AIM Buddies this will tend to be the On Line broadcast pic of the moment.
    It can the pic in the Card in the Contacts List (Or Address Book)
    In the case of your Own Pic this in fact can have been called from System Preferences > User and Groups (formerly Accounts) .
    All of them can be changed individually, so for yourself in the Mac Account pic, the Contacts > My Card and Messages Buddy Pic can have different pics set to them.
    I don't have a Facebook Account so I can't say if the Contact's pulling of Pics is what is causing them not to show in Messages.
    I suspect the general option to display them is not On.
    4:36 PM      Friday; November 2, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Already logged in message but not showing up in Server Admin

    Running server software 10.3. Most clients are 10.4.
    I have several students that can't log in because it says they are already logged in elsewhere. Normally I go to Server Admin and disconnect them and they can then log in. But I've got about 4 students right now that are NOT showing up in Server Admin, so I can't disconnect them. Any ideas of what might cause this, and more importantly, how to fix it?

    I have this issue as well. Rebooting the router and server? I'm glad that works but that should not be necessary. Neither should checking allow simultaneous login on multiple computers in WGM.
    I will continue to look for an answer. thanks for the tip.

  • My messages are not showing

    My messages are not showing

    JBH, when Apple reeased the new OS (Operating System) for their mac computers, they included many more iOS-like features. Some of these features included Reminders, nots, calendars, and iMessage. As of the newest release, you can now send iMessages from your mac to other macs or iOS devices. (iPod Touch, iPhone, and iPad.) If you set up your account in "messages" on your iMac by going to preferences (CMD+,) andadding your iMessage account, you can send and receive messags on your iMac.

Maybe you are looking for

  • I can't print a contact sheet

         ...and it's driving me nuts!  Every time I try to print a contact sheet (to pdf, or to printer), everything just hangs. I get the spinning beachball fo death most attempts, or it spins and spins and finally spits out the pdf after about 10 minut

  • "CLOSED": HOW TO LOAD FIRM PLANNED ORDERS OF ANOTHER PLAN INTO ASCP PLAN?

    Hi everybody, How to load firm planned orders of plan 1 into plan 2? Business Case: Customer uses a separate planning for order intake. During order intake the requested due date is validated based on ASCP Gantt Chart. Bottlenecks are resolved. For m

  • How to use master master web templates?

    Hi, I have around 20 reporst in BW to be displayed on web. Hence I have created Web Template for each of them. Format and Layout of these web templates is exactly same. The problem is, if there is any change to layout or if any new funtionality needs

  • Iweb opens with a blank default page..where has my site gone?

    I have been using iweb to run a web site for almost 18months. Yesterday I tried out "iwebsites" which I downloaded from apple. It suggested I can run multiple sites and a friend wants me to run one for her. Originally I was advised to set up a family

  • In Place Discovery Search - "Search in Progress", not progressing?

    Hi, When I click SAVE to run the In Place Discovery Search, it just seems to stay "in progress" and never complete. I can run an estimate on the search and it seems to work fine. No errors to report? Suggestions?