Unsolicited Remote Desktop Connection

A large number of users on my SBS2008 domain receive the following message at frequent intervals "computername\admin wants to connect to this machine.Click OK to disconnect your session immediately or click cancel to stay connected.Otherwise you will
disconnect in 30 seconds."
The last major task that was carried out on the server was to recover hard disk space. I noticed that the Microsoft SQL Server\ MSSQL.1 had in access of 20Gb in the SBSMONITORING log file.I used the following link to reduce the size.
http://blogs.technet.com/b/sbs/archive/2009/07/14/sbs-2008-console-may-take-too-long-to-display-alerts-and-security-statuses-display-not-available-or-crash.aspx. Basically stop the SBSMONITORING service, backup MSSQL, download the the rebuilt database file,
apply the shrink script then apply the new database. The process off without a problem (so I believe).
I will appreciate assistance if someone can point me in the right direction to solve this problem.

I was thinking that the WSUS is faulty and the issue lies in that area. The event logs don't show too much. What I have noticed is that the applications log shows information (not error) about event id 17137 from source MSSQL$MICROSOFT##SSEE cannot
be found. I followed this link
http://social.technet.microsoft.com/Forums/en-US/be9e3620-51bb-4cc2-a8e7-308351eacea6/sbs-2008-constant-mssqlmicrosoftssee-in-event-viewer?forum=smallbusinessserver and made the changes. This did not solve the problem. I have now reverted to the original
settlings.
I hope I am not barking up the wrong tree.

Similar Messages

Remote Desktop Connection Manager can only open 6 sessions at a time on Server 2012

I am only able to open, and view thumbnails, for a maximum of 6 RDP sessions on my Server 2012 box at a time in Remote Desktop Connection Manager (RDCM). If I add more sessions I just get a variety of connection errors for the additional sessions. If I activate
a 7th session one of the existing 6 sessions goes off-line with a connection error message. Sometimes the error says 3334, sometimes the error says 0x8345000E, and sometimes it just says there is a connection error.
I have checked Group Policy on the server to ensure I don't have any settings restricting the number of RDP sessions.
In fact, I will often have 30 or 40 RDP simultaneous sessions opened, I am just not able to view them all in RDCM. I have seen reviews of RDCM with screenshots showing dozens of thumbnails so it seems to be something that's possible to do.
Are there any settings I should make on the server to allow RDCM to connect to more than 6 simultaneous RDP sessions?
Just to be clear, all these RDP sessions are running on the same server. Also, I am just using the trial license for Server 2012 and Remote Desktop Services right now. I don't think that should have an impact, but I wanted to be thorough.

Thanks Jakub for "corflags" info.
Unfortunatelly it doesn't work because running mRemoteNG.exe process in 64bit can't load MSTSC ActiveX component (referenced assemblies) because original files were assembled from 32bit dll [mstscax.dll]?
Error message when making RDP connection:
Could not load file or assembly 'Interop.MSTSCLib, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. An attempt was made to load a program with an incorrect format.
I was able to create new AxInterop.MSTSCLib.dll and Interop.MSTSCLib.dll assemblies from 64bit dll version and now it works with "AnyCPU":-)
http://www.filedropper.com/axinteropmstsclib-mremoteng
Using AxImp.exe and TlbImp.exe didn't worked for me because it creates assemblies in wrong namespace "MSTSCLib" instead of "Interop.MSTSCLib" (AxImp.exe) and TlbImp.exe for changing namespace generated many "marshaled errors"
so final .dll wasn't working.
Adding MSTSCAX.dll reference in Visual Studio directly created correct and functional assemblies. Who don't know how to create 64bit compatible assemblies or don't have Visual Studio, feel free to check linked file.
Hope it helps
P.S. Sorry for possible technical misinterpretation, I am not programmer so creating new assemblies was trial-error process...

Using a remote desktop connection with the Macbook pro.

I use the remote desktop connection on the Macbook pro and am unable to exchange info between the mac and the remote connetion windows. For example, if I am writing an email from the remote connection and want to attach a document, photo etc. that I created on the Mac, it just doesn't work. It seems like the Mac and the desktop connection are completely seperated eventhough they are both on the screen in front of me. the systems I use for work are not Apple compatible and will not work on anything other than windows explorer and in my case the remote desk top connection. Any ideas!

Welcome to Apple Discussions
Try running in 'ClamShell' mode (MacBook Pro lid closed and using an external keyboard and mouse) with the Gateway connected and then run System Preferences/Displays, it should show then ...
My 1920x1080 monitor shows the following:

Remote Desktop Connection to Windows 8 PC from other computers crashing

Hi all.
Was hoping someone would be able to help me with an issue I'm having.
I'm trying to get a LAN remote desktop connection established to my Windows 8 laptop. It's an HP ENVY 17t-2100 CTO 3D Edition Notebook PC. Note that I'm running Windows 8 Pro only - not 8.1 as HP haven't released 8.1 graphics drivers for this laptop and probably
never will. The computer has a single user profile that has full administrator rights.
I have followed numerous web tutorials on how to turn on Remote Desktop. I've gone into Advanced System Settings > System Properties > Remote > checked "Allow Remote connections to this computer". All seems ok to me.
The problem comes when I try to establish a connection. When the connection is made, it almost instantaneously crashes the session on the computer or device trying to connect. The RDP client on my Windows 7 laptop, Mac OSX or Mac running Windows 8.1 Pro just
crashes, while the RDP iPhone or iPad app simply flickers for a few seconds then goes back to the main screen. Meanwhile, the HP ENVY loads the lock screen and displays a message saying XXX device is connected remotely and it won't let me log back in to kill
the connection or do anything. I have to restart the computer from then to be able to use it again.
I'm convinced there's not a problem with my local network as the HP ENVY can RDP into the Windows 7 laptop or Mac running Windows 8.1 without any problems. All computers are connected via Ethernet to a Linksys/Cisco wireless ADSL modem router which supports
Gigabit. The iPhone and iPad of course connect to the wifi network from the Cisco/Linksys modem router
I've also had a brief look at the RDP local connection logs. From what I can make out, they confirm that a user has successfully logged in, but they don't provide a crash log or a log of the user ever disconnecting, probably because I have to restart the computer
to continue using it. Dead end there, it seems.
The HP ENVY is connected to 3 external HP LED monitors. I've disconnected them and tried all devices with no luck. I've also played round with the RDP client settings to not mount drives or printers and the HP ENVY has no printers connected anyway, though I've
done all I can to remove any printer drivers as I've read elsewhere that they are what could cause the problem, but I've had no luck.
If anyone can suggest anything more that I can try, I would be unbelievably grateful! I'm more than happy to provide screenshots or videos of what happens when I try connecting. I'm not sure what you experts would find immediately helpful so just ask away if
you think I can provide anything.
Thanks in advance!
rugbyreff

The first thing that I would try is to uncheck all of the boxes for local resources on computer running the RDP client. It is possible that a device, such as a printer or other redirected device, is causing the crash. You can also look under Event Viewer
in the event logs of both systems and see if anything unusual appears when you attempt the remote connection.
Brandon
Windows Outreach Team- IT Pro
The Springboard Series on TechNet
Hi Brandon
Many thanks for your suggestions. There's nothing in the logs that I could find, like I said in the original post. I've also tried connecting with bare minimum settings on all devices (FYI the iPad and iPhone version don't support the use of printers) and
this still hasn't helped.
If you have any other ideas I'd be very glad to hear them!
rrugbyreff
"If it's worth doing, it's worth overdoing" -- MythBusters

HP LaserJet Pro MFP M127fn and Remote Desktop Connection

So, my pc operates on Win7-64bit. I use Remote Desktop Connection to log in to the company server, running on MS Server 2008. I purchased the HP MFP M127fn today after confirming that it is compatible with both OS listed above. I successfully installed it directly to the server via usb cord - to make sure the correct drivers downloaded to the server. I was able to test-print and print from an app while physically connected to the server. I then disconnected the printer from the server and successfully connected it to my local pc. I can test-print and print from an app on my desktop. When connect to the server via RDC, it recognizes the MFP M127fn as my default printer, and sends a print job to my local pc. I can see the job in the server print queue, I can see the print job in queue on my desktop....it spools, then says it prints, however no actual print job ever materializes.
If I select to print to the MFP M127fn fax from the server, it will open the fax window on my desktop, allow me to enter a phone number, and will dial out and send the fax. So, that driver is functioning properly.
So, my question is this: If the printer and fax claim to be successfully installed, why do I not get the print job that is sent via the server and appears in my local print queue? I get no error, either on the server side or the local desktop. They both truly think the job has printed.....but no paper ever comes out.
Our company has used several other HP printers over the years with this same set-up and have never had a problem until now. The last one was also an HP MFP - the CM1312. So, I am now completely stumped by this. I called HP support and was routed through 4 different areas before I was told that no one had a clue what the problem might be. I then called the Easy-Tech desk at Staples, where I bought the printer, and was told that it was most-likely a hardware issue and I should return the printer to swap it out for another one. If nothing would print at all, I would agree it's hardware. But, as I can print locally, I'm more-inclined to think it's driver-related......any suggestions?

Hi,
The M127fn uses the PCLmS printing language which is a lightweight printing language, a such is not supported for RDP printing.
As a reference you may find the following socument about Citrix, Terminal Services and RDP Printing, as you may find listed the M127 is not supported for a such:
http://h20195.www2.hp.com/v2/GetDocument.aspx?docname=4aa0-8465enw&404m=secure-erc
That is clearly not an harware issue, however I suggest returning the printer and replacing it with a different model which better feet such a task.
The M225dn as an example uses a PCL 6 print driver and should provide a better feet for RDP printing using HP UPD.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I have an Ipad 2 and here is what I am trying to accomplish. On my laptop I connect to a remote desktop connection to access a shared program we use for reporting. How do I set up my Ipad to access this remote server? Thanks for the help.

I have an Ipad 2 and here is what I am trying to accomplish. On my laptop I connect to a remote desktop connection to access a shared program we use for reporting. How do I set up my Ipad to access this remote server? Thanks for the help.

Close ... before going for a specific Cisco app ... lets find out some details:
Host we need more details:
What is your server environment (Windows Server, or Mac OS X Server, or Linux)?
What security is implemented in your environment - as what is restricted (RDP for all or specifc credentials on all machines? Are you part of local admin group to the server you wish to connect)?
Does your environment Support CISCO IPSec connection? If so use Settings> VPN and IPSec tab to enter VPN details, if not then go with above suggestion. IF your restricted to RSA then either built in VPN settings or 3rd party app for RSA would suffice.
Finally, there are many RDP applications out there I use "Mocha RDP Light" (free minimal ads when launched not when connecting).

Remote desktop connection not working in windows 7 Pro x64 bit sp1 3389 port not working

i have still facing same problem in last two week in my system RDC not working . i have installed in my system windows 7 x64 bit Pro sp1 then i check 3389 port working or not in my system use the command netstat -a -o command in
command prompt but this is my bad luck its not woking in my machine after i have decide to change RDC listening port via registry i have change it 3389 to 3391 after restart my system, and
after again testing using same command but no any change again rdc not listening . After i have search this issue on search engine google bing and microsoft , i have found more solutions but i have try one
uninstalled two microsoft updates first is kb KB2621440 second is KB2667402 and after again restart my system and again installed KB 2667402 But not change i have already enabled Remote Desktop connection in windows 7 and select the option
any version computer running , i have try three and four time enable disable remote desktop connection in my machine . but not change i have all windows firewall disable and uninstalled anti virus they intalled in my machine , and using the Mcafee
stinger tools to scan my machine to remove virus but stinger is not found any thread in system. ihave already run this command in my system sfc /scannow Please Can you help me to fix this issue.

Hi,
When you try to start the Remote Destop Connection, what errors it showed out?
Could the other PCs connect this PC with the RDC?
So you have read this blog?
RDP connections might fail due to a problem with KB2621440 - MS12-020
Did you reinstalled the KB2621440?
Besides, did you follow this guide to enable the RDC connection?
Connect to another computer using Remote Desktop Connection
And also this guide?
Why can’t I connect using Remote Desktop Connection?
Please take a check with those settings again.
Best regards
Michael Shao
TechNet Community Support

Can 1 instance of Windows 8.1 ENTERPRISE host multiple Remote Desktop connections?

I am shopping for the components for building a machine with fair, high-performance hardware. I have Windows 8.1 Professional. I wanted to know if either Windows 8.1 Professional or Windows 8.1 Enterprise can support multiple remote connections
from users outside the local network. For example, my brother is based in San Diego, CA and has an underpowered laptop. Is there any way to make a remote connection over that much distance, from San Diego to Northern Virginia, from a RDP client running Windows
8.1 Professional to a RDP "server" Windows 8.1 Professional/Enterprise machine, and run a modern, single- or multiplayer- game over smoothly that connection? At the very least, is it possible to run common
apps (e.g. Microsoft Office 2013 IE 11, Adobe Acrobat XI) smoothly on a Windows 8.1 Pro RDP client connected to a Windows 8.1 RDP "server" located 2250+ miles away?
Would upgrading my installation from Professional to Enterprise improve the responsiveness and display quality for my remote users?
I know Windows Server R2 2012 has features specific for handling remote connections, but I am trying to keep a Windows 8.1 user experience. Still, if anyone can show some evidence that Windows Server 2012 R2 Remote Desktop Services (RDS) improves display
and responsiveness over long-distances for remote (RDS) connections, then I will shop for Windows Server 2012 R2 Standard instead. The huge drawback of Windows Server 2012 R2 Standard CALs is the enormous cost to enable 3-5
remote connections for family, non-commercial use.
Has anyone attempted to host long-distance remote access, non-commercially, for 3-5 connections? Has it worked well? What, in general, is required?
T. Webster

Hi,
It depends on the quality of the network connection to run the software smoothly throuth RDP. And I don't think the quality would be better if you upgrade to Windows 8.1 Enterprise.
Windows 8.1 allow only one session of RDP, the Remote Desktop Server in Windows other than the Windows Server edition has a limitation to allow only one concurrent user per session by default, i.e. if someone remotely connects to the computer over RDP then
whoever was logged in at that moment will be automatically logged off, even if that user is physically present at the computer. This is by design.
Regarding more information about RDP, please take a look at the following articles:
Remote Desktop app help
Remote Desktop Connection: frequently asked questions
Best regards
Michael Shao
TechNet Community Support

How do I find out my MBP's 'server name?' to run Remote Desktop Connection?

How do I find out my MBP's 'server name?' to run Remote Desktop Connection?

Hi Dave,
You need to type the server name that was assigned by your mail administrator for the server running Exchange. So please ask your administrator for the Server name. Thanks for your understanding.
For more information, here is an article for your reference.
Add or remove an e-mail account
https://support.office.com/en-ca/article/Add-or-remove-an-e-mail-account-ff7c7735-6117-4b0d-aef6-8aa8a072f60f
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Remote Desktop Connection and printing issues

Hi,
I am using Windows 7 on my desktop and also connected to Windows Server 2008 R2 to run applications in Windows Server. However, I noted there is problem with the printer issues. Sometimes, when I tried to print some documents using applications
in Windows Server with my local printer in my room connected to desktop, it won't work.
Moreover, I need to go to Windows Server, Component Service to restart printer spooler so it will work again. This is a pain.
I also noticed there is about 30 seconds wait to process any document to print.
Unlike if I print documents directly from my local desktop computer running Windows 7 and connected to local printer, it only takes seconds to print.
My desktop is connected to Windows Server 2008 via local area network. I should not expect such a significant delay in printing.
I also wonder why printer spooler needs to be restarted when printer is not working.
Can anyone advise me about this? Can Microsoft looks into this problem and release updates to fix the bug to improve the system?
Thanks
Regards,
Clement

Hi,
Please check if you turn on this settings:
You need to set this up just before you connect. The setting will be saved so that you won't need to change it the next time you connect.
1. Open Remote Desktop Connection by clicking the Start button, clicking
All Programs, clicking Accessories, and then clicking
Remote Desktop Connection.
2.Click Options, and then click the Local Resources
tab.
3.Under Local devices and resources, select the Printers check box.
4.Click Connect to start the session.
Make sure that you select your printer in the Print dialog box each time you print.
Karen Hu
TechNet Community Support

Remote Desktop connection and retina display

I've been trying to set up my new MacBook Pro [with Retina display 2015 edition]. I use a lot of university software via Remote Desktop connection, it worked very well on my Acer laptop. it's really important that that this staff works as good on my new computer. The problem is that when I open the connection on MacBook the display is not great - I can see pixels, just like my grandmas' TV from the 1970s. I tried with different resolution settings, making it bigger or smaller but the display is still not great. Any suggestions or advice would be greatly appreciated.
I've been trying to set up my new MacBook Pro [with Retina display 2015 edition]. I use a lot of university software via Remote Desktop connection, it worked very well on my Acer laptop and it's vital that this staff works as good as on Windows machines.
The problem is that when I open the connection on MacBoook the display is not great - I can see pixels, just like my grandmas' TV from the 1970s. I tried with different resultion settings, still the same.
Any suggestions/help would be much appreciated.
I've been trying to set up my new MacBook Pro [with Retina display 2015 edition]. I use a lot of university software via Remote Desktop connection, it worked very well on my Acer laptop and it's vital that this staff works as good as on Windows machines.
The problem is that when I open the connection on MacBoook the display is not great - I can see pixels, just like my grandmas' TV from the 1970s. I tried with different resultion settings, still the same.
Any suggestions/help would be much appreciated.
I've been trying to set up my new MacBook Pro [with Retina display 2015 edition]. I use a lot of university software via Remote Desktop connection, it worked very well on my Acer laptop and it's vital that this staff works as good as on Windows machines.
The problem is that when I open the connection on MacBoook the display is not great - I can see pixels, just like my grandmas' TV from the 1970s. I tried with different resolution settings, still the same.
I've been trying to set up my new MacBook Pro [with Retina display 2015 edition]. I use a lot of university software via Remote Desktop connection, it worked very well on my Acer laptop and it's vital that this staff works as good as on Windows machines.
The problem is that when I open the connection on MacBoook the display is not great - I can see pixels, just like my grandmas' TV from the 1970s. I tried with different resolution settings, still the same.

Should I assume from your reply that the solution lies with my corporate IT?

Server 2012 R2 Remote Desktop Connection Broker

I have installed RDS on a server named PLUTO on which Windows 2012 R2 datacenter is in. There is a domain controller (domain name: AGROSY) running on a Linux server. We have used Samba 3.6.6 to control the file sharing system.
When I attempt to install RDS in Server Manager, it states as following: could not retrieve the deployment information from RD connection broker server pluto.AGROSY.
Then, I searched a lot of solutions, e.g. and tried as following:
Enter-PSSession -ComputerName pluto --> which works;
but Enter-PSSession -ComputerName pluto.AGROSY --> which gives the error message as: Enter-PSSession : Connecting to remote server pluto.AGROSY failed with the following error message : WinRM cannot process the request. The following
error with errorcode 0x80090311 occurred while using Kerberos authentication: There are currently no logon servers available to service the logon request.
If I ping the pluto.AGROSY, it works as well.
I have no idea how it can be solved, please help me out. Thanks a lot!

Hi,
Thanks for your comment. Sorry for late reply.
Initially please enable the PowerShell remoting in your case.
Enable-PSRemoting
http://technet.microsoft.com/en-us/library/hh849694.aspx
For FQDN name, please see that RDCB is properly configured and also certificate which you have used for RDS environment must be trusted with its private key and must match the FQDN name of the server. Did you seen the certificate has been properly used and
configured. You can go through following article for certificate and also for configuring RDCB role.
Configuring RDS 2012 Certificates and SSO
Configuring HA for the Remote Desktop Connection Broker in a 2012 RDS Farm
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Server 2012 RTM Remote Desktop Connection Broker Role Won't Install

Hey guys,
I have been searching for and trying fixes for this for 3 days, and I've gotten no where. Thanks in advance for trying to help me out.
Here's the situation:
I have a brand new installation of the Windows Server 2012 Datacenter 64-Bit RTM from MSDN. This is my one and only server (just my personal one for home), so I'm using this single server to run all of the services that I need. After a fresh
installation, I added the AD and DNS roles and promoted the server to the PDC. Then I go to add the Remote Desktop Virtualization Services (the VM virtualization role). The installation fails, but I can't find any explanation as to why.
I've wiped out the OS and reinstalled from scratch at leat 15 times, trying various combinations, fixes, approaches, etc. including powershell, Remote Desktop Services Deployment, standard role-based deployment, etc.
Using the role-based deployment, I can get every 'Remote Desktop Services' component to install except the Remote Desktop Connection Broker. I've tried enabling RDMSUI_TRACING, but didn't get any information at all as to why it's failing. I also
cannot find RDMSDeploymentUI.txt log.
I've also tried to deploy this using Powershell using this command:
New-SessionDeployment [-ConnectionBroker] <string> [-WebAccessServer] <string> [-SessionHost] <string>
That particular item does provide some error messages, but they seem to complain about the Session Host not being able to install due to not being able to find the connection string key in the registry for the Windows Internal Database. However, I can
get the session host and every other component to install using role-based deployment, except the Connection Broker.
I've run an SFC scan, which found no issues. I've also tried applying the one update available in Microsoft Update, and tried it without applying that update (reinstalling between attempts of course).
I'm completely at a loss. Has anyone encountered this before? Any suggestions would be greatly appreciated. Is there a powershell command for just installing the Connection Broker that might provide some additional error information, or any
information at all?
I would greatly appreciate any help anyone could offer. I'm willing to try anything. Thanks for taking the time to read this.
Sincerely,
Dominick

Also Found this:
1. You try to install the Remote Desktop Connection Broker (RDCB) on a server that also has the Active Directory Domain Server (domain
controller) role installed. This configuration is not supported by Microsoft. You need to install the RDCB on a server that does not have this role installed. See: Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012 http://support.microsoft.com/kb/2799605
2. If you don’t have the Active Directory Domain Service install, this issue might be caused by the Windows internal database (WID) that
the connection broker installs and the Windows Update KB2821895. If you have KB2821895 installed, unfortunately you can not uninstall this KB. Try to install the Remote Desktop Connection Broker (RDBC) role on a server that does not have this Windows update.
Note: There is currently no official communication from Microsoft that here is an issue with RDBC and KB2821895. However, try the RDBC installation
without this KB and see what happens.
For more information, Refer below link...
http://fabrikam.wordpress.com/2013/07/15/connection-broker-installation-failedremote-desktop-deployment-issues/

Remote Desktop Connection Server 2012 Clients only using on DC as Logon Server.

I am using Server 2012 and have an RDC Server running on a VM. Originally I had ordered the licensed version as Essentials was provided to me which does not allow for a full domain environment, which is required for the RDC server. Anyway, I
used Eval versions to get started, not thinking or realizing that the DC would never be able to get Activated since it is an Eval. So after 4 days I have finally, loaded Server 2012 on a new VM, promoted to DC, Transferred FSMO roles...DNS is up and
replicating across both DC's. The Eval keeps shutting off and was going to demote it and remove, but whenever it is shutdown the Clients receive a "No Logon Servers are available " error. I start up the old DC and it works. I doublechecked
all of the roles have been moved, I checked the RDC gateway, everything points to the same Domain information, but when I check an account using 'CMD set' it shows the old DC as the Logon Server. Is there something I am missing in the RD Gateway or somewhere
else. Is there a way to force it to use the new DC? I have tried setting the options in remote desktop connection to use a particular TS Gateway setting and it doesnt seem to work. Can someone please help me think about this and offer a
suggestion or let me know if you need more info. I can figure nothing else out at this point.
Thanks so much in Advance.
-T

it sounds like your clients / rdc servers may still be pointing to the old DC for DNS.
Can you check you have updated DNS on the clients to talk to your new domain controller.
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
The new DC is the only DNS server listed on the RDC Server and is the only DNS listed for the clients other than the gateway which have as a secondary. If I change the static on the old DC I cannot login, as soon as I put it back, I can login and it
shows that DC as the logon server.
I did a simple recursive test on both DNS servers....The new Domain Controller passes, the Old One which I am trying to remove, does not.
I will reply with any other updates as I continue to look into this and thanks for the suggestions.
So I also Pinged the domain from the RDC Server as suggested and it replies back with the old DC IP.
Not sure why.

Remote desktop connection manager on windows 8.1, can't connect to windows server 2012 R2, Socket closed

remote desktop connection manager on windows 8.1, can't connect to windows server 2012 R2, Socket closed each time i try to open remote connection to the server,
does remote desktop connection manager V2.2 not compatible with windows 8.1, and if so, is there are any other compatible versions
or what's the problem,
Mahmoud Sabry IT System Engineer

this issue maybe will be fix by latest version, we still waiting for it
maybe your issue can be fix using this methods
https://social.technet.microsoft.com/Forums/windowsserver/en-US/61f218a5-5ef8-49da-a035-90cdd64fc9a0/problem-with-remote-desktop-connection-manager-error-3334?forum=winserverTS
http://shawn.meunier.com/?p=1#comment-43

Unsolicited Remote Desktop Connection

Similar Messages

Maybe you are looking for