[UNSOLVED] Synaptics Touchpad & Firefox: Horizontal Scroll

Hey guys.. i'm having a problem with my laptop's Synaptics Touchpad and Firefox.
I can't seem to get my touchpad to allow me to scroll horizontally in the browser (when, say, there's a wide image on a page for instance). Whenever I try to scroll by sliding my finger side-to-side on the bottom edge of my touchpad, the page scrolls up and down, just like the vertical scroll on the right edge!
At first I thought it was a problem with horizontal scrolling on the Synaptics driver in general, but I discovered that if I have something like File Browser open, I can scroll horizontally with the touchpad, so the problem lies ONLY with Firefox.
I have looked for solutions already and everything I find only talks about a possible issue where Firefox might treat the Touchpad's horizontal scrolling and Forward and Back actions and how to fix this. But this is not the problem I am having. But I do have mousewheel.horizscroll.withnokey.action set to 1 in my about:config, which from what I've read is supposed to be correct to allow h. scrolling.
Any ideas?
Last edited by flintmecha (2008-12-01 23:24:37)

FYI, with my Synaptics touch pad and firefox, it works, but I have the mousewheel.horizscroll.withnokey.action set to 0 (default). In fact, all of the settings in about:config with 'mousewheel' in them are all at the default setting. I just had to setup the xorg.conf (old way) or the the /etc/hal/fdi/policy/11-x11-synaptics.fdi (new way) correctly to enable the horizontal scrolling.
Good luck!
Scott

Similar Messages

Synaptics Touchpad, double finger scroll and tap-to-click

I've recently lost tap-to-click functionality on my synaptics touchpad, I have no idea why because I haven't changed anything recently.
Here's my related xorg.conf file:
Section "InputDevice"
Identifier "SynapticsTouchpad"
Driver "synaptics"
Option "AlwaysCore" "true" # send events to CorePointer
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "SHMConfig" "false" # configurable at runtime? security risk
Option "MaxTapTime" "180" # max time in ms for detecting tap
Option "VertTwoFingerScroll" "true" # vertical scroll anywhere with two fingers
Option "HorizTwoFingerScroll" "true" # horizontal scroll anywhere with two fingers
Option "EmulateTwoFingerMinZ" "120"
Option "CircularScrolling" "on"
Option "CircScrollTrigger" "3"
Option "TapButton1" "1"
Option "TapButton2" "1"
EndSection
I'm not sure if I have hotplugging installed so I copied my 11-x11-synaptics.fdi file anyway and edited it:
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
<device>
<match key="info.product" contains="ETPS/2 Elantech Touchpad">
<append key="info.capabilities" type="strlist">input.touchpad</append>
</match>
<match key="info.capabilities" contains="input.touchpad">
<merge key="input.x11_driver" type="string">synaptics</merge>
<merge key="input.x11_options.AlwaysCore" type="string">true</merge>
<merge key="input.x11_options.TapButton1" type="string">1</merge>
<merge key="input.x11_options.TapButton1" type="string">1</merge>
<merge key="input.x11_options.TapButton2" type="string">2</merge>
<merge key="input.x11_options.TapButton3" type="string">3</merge>
<merge key="input.x11_options.SHMconfig" type="string">on</merge>
<merge key="input.x11_options.VertTwoFingerScroll" type="string">true</merge>
<merge key="input.x11_options.HorizTwoFingerScroll" type="string">true</merge>
<merge key="input.x11_options.CircularScrolling" type="string">true</merge>
<merge key="input.x11_options.CircularScrollTrigger" type="string">3</merge>


</match>
</device>
</deviceinfo>

I have the same problem, my workaround is setting the options with synclient executed automatically on login.
Im quite annoyed though that gnome just overrides settings done in xorg and hal policies, can anyone tell where to look for gnomes information storage?
MC.

Synaptics TouchPad V7.5 Scrolling Disabled Windows 10

I have recently updated by OS from Windows 8.1 to Windows 10. After using it for a few days the touchpad scrolling suddenly stopped working. Now every time that I log in to my profile, the scrolling feature has been disabled by default. I have to go into the settings for the touchpad and tick the scrolling option to make it work again. For some reason every time I log in the system is returning to the touchpad default settings where scrolling is disabled. Is there a way to change it so that the touchpad does not revert to default settings every time I log in? Or failing that, is there a way that I can make scrolling enabled part of the default settings? All help appreciated Thanks Matt

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion 15-n032sa Notebook and issues with Synaptics TouchPad Scrolling being disabled Windows 10.If your computer is having problems finding and installing operating system updates, try using the Windows Update Troubleshooting tool to fix the problem. Here is a document that shows how to update drivers that are not working correctly with Windows 10. HP has been working closely with Microsoft on the development of Windows 10. Presently there is no driver available for your system. You could try and check at a later date as I am seeing new drivers all the time. Here is a document on how to troubleshoot the Touchpad.
If you will go to the section on General Settings for the TouchPad, then go to the advanced for settings to customize the scrolling characteristics.
Hope this fixes your issue.
Thanks.

When I open PDFs in firefox 4 RC my Synaptics touchpad 2-finger scrolling stops working.

I am using Windows 7 and have Acrobat 9 Pro installed. Scrolling works fine when I do not have a pdf open in any tab. When I have a pdf open in any tab, I can scroll in the pdf's tab but not in any other.
My logitech mousewheel works fine all the time.

https://bugzilla.mozilla.org/show_bug.cgi?id=626813
There seems to be a bug in Firefox. Can you update the bug thread with who makes your touchpad and what OS you're on (Windows 7 64-bit, for example).
Hopefully, we'll get this fixed soon.

Synaptics touchpad doesn't scroll after Windows 10 upgrade

I installed the Windows 10 upgrade today (From Windows 7) and now the scroll function on my touchpad doesn't work and it's driving me CRAZY not to be able to scroll! I've tried uninstalling and reinstalling the Synaptics driver without success. Help! Thank you!

Hi: That happened to me too on my HP 350 G1. On mine, I went into the control panel, and I changed the view to Large Icons (because it is easier for me to find stuff that way). Then I found a Synaptics Luxpad control panel icon. I clicked on that and found that the scrolling feature was unchecked. I checked it, hit apply and close and now I can scroll again.

Horizontal scroll works in Adobe Viewer etc, doesn't work in Firefox!

I'm using the latest version of Firefox and I have updated my relevent drivers. I am running Vista Home Premium on a Sony Vaio laptop. The touchpad is an Alps Pointing Device.
This problem has been bothering me for YEARS, and every now and again I get inspired to try and fix it. But still no luck! I'm sad that Firefox have not 'fixed' this issue when they released new versions of the software.
I've tried changing the settings in about:config (as suggested in other discussion threads about this issue) and nothing works. Tried different drivers, no luck. Any guidance would be appreciated.
Interestingly, the area of my touchpad that is set to horizontal scrolling acts "dead" in Firefox. Finger movements on it do nothing... the cursor doesn't move at all.

Hopefully an update fixes this. I have had this problem for a long time, tried many different fixes, no luck. Horizontal scrolling works in IE9 however.

Scrolling with Laptop Synaptics Touchpad

Hello, I have been using the Windows 10 TP for awhile now and I was wondering if anyone has a solution to this problem I am having. My Synaptics touch pad on my HP Envy computer scrolling is not working in IE 11 and Metro Apps. Scrolling is working in
Control Panel and Firefox and uninstalling and reinstalling my previous driver didn't work. I also tried installing a newer driver, but the issue still happens. I know Windows 10 TP is still early, but if anyone has a solution, I'll be glad to hear it. Thanks
for the help.

Andrw0830,
The newer driver that you tried installing should have been latest one for Windows 8.1.
If it wasn’t, start by trying that first.
Another option if the latest Windows 8.1 driver didn’t resolve the issue is to reinstall the device (in your case, the Synaptics touchpad).
To do this, right-click on your Start button and select Device Manager.
Now find your device and right-click on it, then select Uninstall.
Remember, you’re only uninstalling the device and not the driver.
Once the device is uninstalled, restart your computer.
Upon restarting, the device will be reinstalled and should resolve the issues you were experiencing.
Hope this helps!
Mike
Windows Outreach Team – IT Pro
Windows for IT Pros on TechNet

Horizontal scroll bar in Firefox

Hi,
I've managed to get rid of horizontal scroll bars in a page
in IE - and it looks fine in Safari too - but in Firefox there's a
horizontal scroll bar.
Any ideas how to get rid of that?
It here:
http://www.mywebspinners.
com/garrigae/hr/index-F.php
Click on the 'Plus...' below the text - and you'll see the
scroll bar appear.
Thanks,
- Greg

On 25 Jul 2007 in macromedia.dreamweaver, GregInFrance wrote:
> I've managed to get rid of horizontal scroll bars in a
page in IE -
> and it looks fine in Safari too - but in Firefox there's
a
> horizontal scroll bar.
>
> Any ideas how to get rid of that?
>
> It here:
http://www.mywebspinners.
com/garrigae/hr/index-F.php
>
> Click on the 'Plus...' below the text - and you'll see
the scroll
> bar appear.
Don't use divs with overflow set to auto. It results in
internal
scrollbars in the page, which (IMHO) are not a good thing.
They only
make navigating the page harder.
Joe Makowiec
http://makowiec.net/
Email:
http://makowiec.net/contact.php

After Firefox 12, some fields in forms in our help desk application do not display correctly. They appear as horizontal scroll fields instead.

We use a Help Desk system at work (BMC Remedy IT Service Management). In version 12 of Firefox, all fields are displayed correctly in the form. However, if I upgrade to any version greater than 12, some of the fields display as horizontal scroll fields (without showing the data in them). As such, I am forced to stay on version 12 for work.

Found this is actually a problem with the BMC Remedy system in use (version 7.1). Here are details if anyone is interested: https://communities.bmc.com/communities/message/256456

When in Firefox, my taskbar covers the horizontal scroll bar. How do I change it so that it wont?

When I'm in Firefox, the taskbar at the bottom of the screen hides the horizontal scroll bar. How do I get the scroll bar to be visible?

Different systems and your iPhone isn't hitting the same website as your Mac. It will be redirected to a mobile version, which likely is formatted differently.
If you know of someone who has it working that way in Safari, you might try Resetting Safari from the Safari menu.
Are all the other options checked in Safari Autofill preferences?

Whenever I play anything on Windows Media Player Classic, the middle mouse button does not work as a vertical scroll in firefox, but instead shows a horizontal scroll that does not scroll the web pages. How can I fix this problem?

Hi
I have a windows 7 and whenever I play anything on Windows Media Player Classic, the middle mouse button does not work as a vertical scroll in firefox, but instead shows a horizontal scroll that does not scroll the web pages. How can I fix this problem?
I hope that was clear.
Thnx

Hello kmanthie,
I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
I worked on behalf of HP.

[solved] Synaptics touchpad scrolling not working...

I have the device set up as follows in xorg.conf
Load "synaptics"
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.24"
Option "MaxSpeed" "0.48"
Option "AccelFactor" "0.0100"
Option "SHMConfig" "on"
EndSection
It works well, but I get no scrolling on the sides. Any ideas? I'm using KDE if that's of any relevance.
Thanks,
Shane
Last edited by krazyshane (2007-12-03 18:24:39)

Hmm.. I see no errors.
Here is my Xorg.0.log file:
[shane@Shane-Arch ~]$ cat /var/log/Xorg.0.log
X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-rc1-ARCH i686
Current Operating System: Linux Shane-Arch 2.6.23-ARCH #1 SMP PREEMPT Sun Nov 18 07:43:05 UTC 2007 i686
Build Date: 07 November 2007 11:19:12AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 4 11:34:08 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Alps touchpad"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) No default mouse found, adding one
(**) |-->Input Device "<default pointer>"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d4540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,3340 card 1028,0191 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,3341 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24c2 card 1028,0191 rev 01 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1028,0191 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 1028,0191 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1028,0191 rev 01 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 81 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24cc card 0000,0000 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24ca card 1028,0191 rev 01 class 01,01,8a hdr 00
(II) PCI: 00:1f:5: chip 8086,24c5 card 1028,0191 rev 01 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,24c6 card 14f1,5422 rev 01 class 07,03,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4e50 card 1028,2001 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:00:0: chip 14e4,4401 card 1028,8127 rev 01 class 02,00,00 hdr 00
(II) PCI: 02:01:0: chip 104c,ac44 card d000,0000 rev 02 class 06,07,00 hdr 82
(II) PCI: 02:01:1: chip 104c,8029 card 1028,0191 rev 00 class 0c,00,10 hdr 80
(II) PCI: 02:03:0: chip 8086,1043 card 8086,2565 rev 04 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[b]
[2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,6), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[1] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[2] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
[3] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[b]
[4] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[b]
[5] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[6] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[7] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xf6000000 - 0xfbffffff (0x6000000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x40000000 - 0x43ffffff (0x4000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:1:0), (2,3,6), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[1] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x40000000 - 0x43ffffff (0x4000000) MX[b]
(--) PCI:*(1:0:0) ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] rev 0, Mem @ 0xd0000000/28, 0xfcff0000/16, I/O @ 0xc000/8, BIOS @ 0x80000000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfaffc000 - 0xfaffcfff (0x1000) MX[b]
[1] -1 0 0xfaff8000 - 0xfaffbfff (0x4000) MX[b]
[2] -1 0 0xfaffd800 - 0xfaffdfff (0x800) MX[b]
[3] -1 0 0xfaffe000 - 0xfaffffff (0x2000) MX[b]
[4] -1 0 0xf4fff400 - 0xf4fff4ff (0x100) MX[b]
[5] -1 0 0xf4fff800 - 0xf4fff9ff (0x200) MX[b]
[6] -1 0 0x44000000 - 0x440003ff (0x400) MX[b]
[7] -1 0 0xf4fffc00 - 0xf4ffffff (0x400) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[b](B)
[10] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[b](B)
[11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[12] -1 0 0x0000b080 - 0x0000b0ff (0x80) IX[b]
[13] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[14] -1 0 0x0000bc40 - 0x0000bc7f (0x40) IX[b]
[15] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[16] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[17] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[18] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[19] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[20] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[21] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[22] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[23] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[24] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfaffc000 - 0xfaffcfff (0x1000) MX[b]
[1] -1 0 0xfaff8000 - 0xfaffbfff (0x4000) MX[b]
[2] -1 0 0xfaffd800 - 0xfaffdfff (0x800) MX[b]
[3] -1 0 0xfaffe000 - 0xfaffffff (0x2000) MX[b]
[4] -1 0 0xf4fff400 - 0xf4fff4ff (0x100) MX[b]
[5] -1 0 0xf4fff800 - 0xf4fff9ff (0x200) MX[b]
[6] -1 0 0x44000000 - 0x440003ff (0x400) MX[b]
[7] -1 0 0xf4fffc00 - 0xf4ffffff (0x400) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[b](B)
[10] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[b](B)
[11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[12] -1 0 0x0000b080 - 0x0000b0ff (0x80) IX[b]
[13] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[14] -1 0 0x0000bc40 - 0x0000bc7f (0x40) IX[b]
[15] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[16] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[17] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[18] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[19] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[20] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[21] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[22] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[23] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[24] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfaffc000 - 0xfaffcfff (0x1000) MX[b]
[5] -1 0 0xfaff8000 - 0xfaffbfff (0x4000) MX[b]
[6] -1 0 0xfaffd800 - 0xfaffdfff (0x800) MX[b]
[7] -1 0 0xfaffe000 - 0xfaffffff (0x2000) MX[b]
[8] -1 0 0xf4fff400 - 0xf4fff4ff (0x100) MX[b]
[9] -1 0 0xf4fff800 - 0xf4fff9ff (0x200) MX[b]
[10] -1 0 0x44000000 - 0x440003ff (0x400) MX[b]
[11] -1 0 0xf4fffc00 - 0xf4ffffff (0x400) MX[b]
[12] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[13] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[b](B)
[14] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[b](B)
[15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x0000b080 - 0x0000b0ff (0x80) IX[b]
[19] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[20] -1 0 0x0000bc40 - 0x0000bc7f (0x40) IX[b]
[21] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[22] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[23] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[24] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[25] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[27] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[28] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[29] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[30] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded by default.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 6.7.195
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) ATI: ATI driver wrapper (version 6.7.195) for chipsets: mach64, rage128, radeon
(II) Primary Device is: PCI 01:00:0
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 4.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE),
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE),
ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
ATI Radeon AIW X800 VE (R420) JT (AGP),
ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
ATI Radeon X850 5D4C (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(--) Chipset ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfaffc000 - 0xfaffcfff (0x1000) MX[b]
[5] -1 0 0xfaff8000 - 0xfaffbfff (0x4000) MX[b]
[6] -1 0 0xfaffd800 - 0xfaffdfff (0x800) MX[b]
[7] -1 0 0xfaffe000 - 0xfaffffff (0x2000) MX[b]
[8] -1 0 0xf4fff400 - 0xf4fff4ff (0x100) MX[b]
[9] -1 0 0xf4fff800 - 0xf4fff9ff (0x200) MX[b]
[10] -1 0 0x44000000 - 0x440003ff (0x400) MX[b]
[11] -1 0 0xf4fffc00 - 0xf4ffffff (0x400) MX[b]
[12] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[13] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[b](B)
[14] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[b](B)
[15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x0000b080 - 0x0000b0ff (0x80) IX[b]
[19] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[20] -1 0 0x0000bc40 - 0x0000bc7f (0x40) IX[b]
[21] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[22] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[23] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[24] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[25] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[27] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[28] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[29] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[30] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfaffc000 - 0xfaffcfff (0x1000) MX[b]
[5] -1 0 0xfaff8000 - 0xfaffbfff (0x4000) MX[b]
[6] -1 0 0xfaffd800 - 0xfaffdfff (0x800) MX[b]
[7] -1 0 0xfaffe000 - 0xfaffffff (0x2000) MX[b]
[8] -1 0 0xf4fff400 - 0xf4fff4ff (0x100) MX[b]
[9] -1 0 0xf4fff800 - 0xf4fff9ff (0x200) MX[b]
[10] -1 0 0x44000000 - 0x440003ff (0x400) MX[b]
[11] -1 0 0xf4fffc00 - 0xf4ffffff (0x400) MX[b]
[12] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[13] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[b](B)
[14] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[b](B)
[15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x0000b080 - 0x0000b0ff (0x80) IX[b]
[22] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[23] -1 0 0x0000bc40 - 0x0000bc7f (0x40) IX[b]
[24] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[25] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[26] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[27] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[28] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[30] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[31] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[32] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[33] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0xfcff0000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(==) RADEON(0): Depth 24, (==) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP)" (ChipID = 0x4e50)
(--) RADEON(0): Linear framebuffer at 0xd0000000
(--) RADEON(0): BIOS at 0x80000000
(II) RADEON(0): AGP card detected
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.28.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000 max=35000; xclk=24300
(WW) RADEON(0): LCD DDC Info Table found!
(II) RADEON(0): Bios Connector table:
(II) RADEON(0): Port0: DDCType-3, DACType-0, TMDSType-0, ConnectorType-2
(II) RADEON(0): Port1: DDCType-2, DACType-0, TMDSType-1, ConnectorType-4
(II) RADEON(0): Port4: DDCType-6, DACType-2, TMDSType-2, ConnectorType-1
(II) RADEON(0): Port5: DDCType-0, DACType-1, TMDSType-2, ConnectorType-6
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): I2C bus "VGA_DDC" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI_DDC" initialized.
(II) RADEON(0): External TMDS Table revision: 2
(II) RADEON(0): I2C bus "DVO" initialized.
(II) RADEON(0): I2C device "DVO:RADEON DVO Controller" registered at address 0x70.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "GPIO_DDC" initialized.
(II) RADEON(0): Panel ID string: Y0316154X1
(II) RADEON(0): Panel Size from BIOS: 1280x800
(II) RADEON(0): BIOS provided dividers will be used.
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 71250
HBlank: 160, HOverPlus: 48, HSyncWidth: 32
VBlank: 23, VOverPlus: 2, VSyncWidth: 6
(II) RADEON(0): Using LVDS Native Mode
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC
(II) RADEON(0): Port0:
Monitor -- AUTO
Connector -- VGA
DAC Type -- Primary
TMDS Type -- None
DDC Type -- VGA_DDC
(II) RADEON(0): Port1:
Monitor -- AUTO
Connector -- DVI-D
DAC Type -- None
TMDS Type -- External
DDC Type -- DVI_DDC
(II) RADEON(0): Port2:
Monitor -- AUTO
Connector -- Proprietary/LVDS
DAC Type -- None
TMDS Type -- None
DDC Type -- GPIO_DDC
(II) RADEON(0): Port3:
Monitor -- AUTO
Connector -- STV
DAC Type -- TVDAC/ExtDAC
TMDS Type -- None
DDC Type -- None
(II) RADEON(0): I2C device "VGA_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA_DDC:ddc2" removed.
(II) RADEON(0): I2C device "VGA_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA_DDC:ddc2" removed.
(II) RADEON(0): I2C device "VGA_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA_DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "DVI_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" removed.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" removed.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Monitor Type: 0
(II) RADEON(0): Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): I2C device "GPIO_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): DDC Type: 6, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on connector: Proprietary/LVDS ----------------------
(II) RADEON(0): Manufacturer: SEC Model: 3158 Serial#: 0
(II) RADEON(0): Year: 2003 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 71.2 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 802 v_sync_end 808 v_blanking: 823 v_border: 0
(II) RADEON(0): Y0316154X1
(II) RADEON(0): ůr`@
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff004ca3583100000000
(II) RADEON(0): 000d0103802115780a87f594574f8c27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101d51b00a0502017303020
(II) RADEON(0): 26004bcf100000190000000f00000000
(II) RADEON(0): 00000000002387026400000000fe0059
(II) RADEON(0): 303331360731353458310a20000000fe
(II) RADEON(0): 00c5af9e8e72604000010a2020200052
finished output detect: 2
finished output detect: 3
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): I2C device "VGA_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA_DDC:ddc2" removed.
(II) RADEON(0): I2C device "VGA_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA_DDC:ddc2" removed.
(II) RADEON(0): I2C device "VGA_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA_DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" removed.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" removed.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI_DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Monitor Type: 0
(II) RADEON(0): Detected Monitor Type: 0
(II) RADEON(0): DDC Type: 6, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on connector: Proprietary/LVDS ----------------------
(II) RADEON(0): Manufacturer: SEC Model: 3158 Serial#: 0
(II) RADEON(0): Year: 2003 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 71.2 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 802 v_sync_end 808 v_blanking: 823 v_border: 0
(II) RADEON(0): Y0316154X1
(II) RADEON(0): ůr`@
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff004ca3583100000000
(II) RADEON(0): 000d0103802115780a87f594574f8c27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101d51b00a0502017303020
(II) RADEON(0): 26004bcf100000190000000f00000000
(II) RADEON(0): 00000000002387026400000000fe0059
(II) RADEON(0): 303331360731353458310a20000000fe
(II) RADEON(0): 00c5af9e8e72604000010a2020200052
in RADEONProbeOutputModes
(II) RADEON(0): EDID vendor "SEC", prod id 12632
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Output LVDS using initial mode 1280x800
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1920
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfcff0000 - 0xfcffffff (0x10000) MX[b]
[1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xfaffc000 - 0xfaffcfff (0x1000) MX[b]
[7] -1 0 0xfaff8000 - 0xfaffbfff (0x4000) MX[b]
[8] -1 0 0xfaffd800 - 0xfaffdfff (0x800) MX[b]
[9] -1 0 0xfaffe000 - 0xfaffffff (0x2000) MX[b]
[10] -1 0 0xf4fff400 - 0xf4fff4ff (0x100) MX[b]
[11] -1 0 0xf4fff800 - 0xf4fff9ff (0x200) MX[b]
[12] -1 0 0x44000000 - 0x440003ff (0x400) MX[b]
[13] -1 0 0xf4fffc00 - 0xf4ffffff (0x400) MX[b]
[14] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[15] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[b](B)
[16] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[b](B)
[17] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[21] 0 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[24] -1 0 0x0000b080 - 0x0000b0ff (0x80) IX[b]
[25] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[26] -1 0 0x0000bc40 - 0x0000bc7f (0x40) IX[b]
[27] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[28] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[29] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[30] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[31] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[32] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[33] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[34] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[35] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[36] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
[37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[38] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(==) RADEON(0): Write-combining range (0xd0000000,0x8000000)
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x08000000
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1200) to (1280,1202)
(II) RADEON(0): Largest offscreen area available: 1280 x 6989
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x1838000
(II) RADEON(0): Will use depth buffer at offset 0x1e14000
(II) RADEON(0): Will use 94208 kb for textures at offset 0x23f0000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xd0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(==) RADEON(0): Using AGP 4x
(II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x8086/0x3340; Card 0x1002/0x4e50]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xe0000000
(II) RADEON(0): [agp] Ring mapped at 0xaf920000
(II) RADEON(0): [agp] ring read ptr handle = 0xe0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xaf91f000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xaf71f000
(II) RADEON(0): [agp] GART texture map handle = 0xe0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xaf23f000
(II) RADEON(0): [drm] register handle = 0xfcff0000
(II) RADEON(0): [dri] Visual configs initialized
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
restore common
restore crtc1
restore pll1
restore LVDS
enable montype: 2
(WW) RADEON(0): No crtc mode list for crtc 1,continuing with desired mode
disable montype: 2
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 11
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xd7ffd000 is: 0xd7ffd000
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xe07fe000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0xe07fe000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 1202)
(II) RADEON(0): Largest offscreen area available: 1280 x 6985
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 331 x 207
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) Alps touchpad auto-dev sets device to /dev/input/event6
(**) Option "Device" "/dev/input/event6"
(**) Option "SHMConfig" "on"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "VertScrollDelta" "100"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "180"
(**) Option "MaxTapMove" "220"
(--) Alps touchpad touchpad found
(**) Option "CorePointer"
(**) Alps touchpad: always reports core events
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "AlwaysCore"
(**) <default pointer>: doesn't report core events
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) <default pointer>: Sensitivity: 1
(II) evaluating device (<default pointer>)
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Alps touchpad)
(II) XINPUT: Adding extended input device "Alps touchpad" (type: MOUSE)
(--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
(--) Alps touchpad auto-dev sets device to /dev/input/event6
(**) Option "Device" "/dev/input/event6"
(--) Alps touchpad touchpad found
and here's my entire Xorg.conf file. You will see that I have been playing with it some... with little/no success. Due to viewing the log I saw "Alps touchpad sets device to /dev/input/event6" so I tried changing my device to that with the same result, no scroll.
[shane@Shane-Arch ~]$ cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Alps touchpad" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe"
Load "record"
Load "dri"
Load "extmod"
Load "xtrap"
Load "type1"
Load "freetype"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
#MOUSE
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
Option "Emulate3Buttons"
EndSection
Section "InputDevice"
Driver "synaptics"
Identifier "Alps touchpad"
Option "Device" "/dev/input/event6"
Option "Protocol" "auto-dev"
Option "Emulate3Buttons"
# synaptic driver specific options
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.24"
Option "MaxSpeed" "0.48"
Option "AccelFactor" "0.01"
Option "SHMConfig" "on"
EndSection
#Section "InputDevice"
# Identifier "Touchpad"
# Driver "synaptics"
# Option "Device" "/dev/input/mouse0"
# Option "Protocol" "auto-dev"
# Option "LeftEdge" "1700"
# Option "RightEdge" "5300"
# Option "TopEdge" "1700"
# Option "BottomEdge" "4200"
# Option "FingerLow" "25"
# Option "FingerHigh" "30"
# Option "MaxTapTime" "180"
# Option "MaxTapMove" "220"
# Option "VertScrollDelta" "100"
# Option "MinSpeed" "0.24"
# Option "MaxSpeed" "0.48"
# Option "AccelFactor" "0.0100"
# Option "SHMConfig" "on"
# Option "SendCoreEvents" "true"
#EndSection
#Section "InputDevice"
# Identifier "Mouse0"
# Driver "mouse"
# Option "Protocol" "auto"
# Option "Device" "/dev/input/mice"
# Option "ZAxisMapping" "4 5 6 7"
#EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "SEC"
ModelName "3158"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # 
#Option "DepthBits" # 
#Option "PCIAPERSize" # 
#Option "AccelDFS" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # 
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "LVDSBiosNativeMode" # [<bool>]
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "RV350 [Mobility Radeon 9600 M10]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
See anything wrong?
Thanks again for all the help.
-Shane

Synaptics touchpad doesn't save scroll settings after Windows 10 upgrade

Since the Windows 10 upgrade (upgraded from 7), the Synaptics Touchpad does not save scroll settings. Every time I shut down and restart the machine the next day, I have to go into settings to re-enable touchpad scrolling. It's always unchecked on restart. Please advise on how to fix this!

My solution, copied from one of many threads regarding this problem - You have Synaptics Port Touchpad driver installed via Windows Update. Here's is a work around until a fully Win10 compatible driver is issued. Win+X/ Device Manager/ Mice and other pointing devices/ Synaptics PS/2 Port TouchPad. R click/ Update Driver Software/ Browse my computer for driver software / Let me pick from a list of device drivers on my computer. Select the top or latest version of Synaptics PS/2 Port Compatible Touchpad Version 19.0.12.95 (7/15/2015) / Next and driver will install automatically. Reboot to finish install. Go to Settings/ Mouse Properties/ Synaptics Device Settings to access Touchpad settings, adjust to your liking/ Apply/ OK. Advise to tick 'Static tray icon in taskbar' for easy access to the settings tab until you're completely happy. This 19.0.12.95 is the latest one on the HP site for my model (your # may vary) and it installs 2 versions. The one Windows Update uses is the same date Port Touchpad version but the 'Compatible' one is installed at the same time. You can tell the difference immediately because it allows you to create a profile. The old 8.1 version did not and neither does the 'Compatible' one. The touchpad setting screens look the same as before (you'll notice the new one looks different and 3 finger press opens Cortana). Why do I consider this a workaround ? Because the 3-finger press app setting, one finger EdgeMotion and demo vids do not work. But at least you can set the scrolling, pinch zoom, speed and sensitivity to your liking and if you reboot, you'll see the system tray icon and your preferences have stuck. Hope this helps somebody !

Synaptics Touchpad Tap Scroll settings changed back to defaults on every reboot. Windows 10

After the Windows 10 upgrade my Synaptics Touchpad setings seem to be reset to factory defaults on every reboot. I go in and change to deselect Tap and Scroll gesture options, save, and everything works as expected. If I reboot my pc... all of my changes are erased. I go to Start >Settings > Mouse and Touchpad > Additional Mouse Options > Device Settings > Settings Right after boot: MultiFinger Gestures (selected) Scrolling (deselected) Tapping (selected) Buttons (selected) After change manually and saved:
MultiFinger Gestures (deselected) Scrolling (deselected) Tapping (deselected) Buttons (selected) Rebooted again... and back to initial defaults (Arg!!!) Can anyone suggest a fix?

Hello! I just wanted to share a solution to this issue. I've been having this issue ever since I started the Windows 10 insider program so it's sad that Microsoft didn't fix it before release. Anyway let's get started! The first thing you will want to do is uninstall the Synaptics Driver. Right click on the start button and click programs and features. Find the Synaptics Pointing Device Driver and uninstall it. You will eventually need to restart your PC but do not do that yet otherwise it will just reinstall itself. Next your going to want to Hide the update from Windows Update. To do this on Windows 10 you need to download a tool which can be found here. https://support.microsoft.com/en-us/kb/3073930 Run the tool it will begin detecting problems and searching for updates. You will get two options, Hide Updates or Show hidden updates. Click on Hide updates and on the list you will see the Synaptics Driver, place a checkmark on it and then click next. Let the wizard finish and you've successfully hidden the Synaptics pointing device driver. Next open settings and click on Update & security, click recovery on your left, and then click restart now under advanced startup. Next click on troubleshoot. Then at the choose an option screen, click advanced options, click on startup settings, and click restart. Once your computer restarts you'll see startup settings. Press the number 7 to disable driver signature enforcement. Your computer will now boot up. Login and open your web browser and go to this link http://www.synaptics.com/en/drivers.php Download the latest synaptic's driver for Windows 8 and install it. Once installed, you maybe prompted to reboot so go ahead and reboot the computer. After that, go into your mouse settings and configure your touchpad to your liking. You will not have to worry about losing your settings after restarting the pc anymore. I suggest keeping the tool that allows you to hide or show hidden updates as it is quite handy.
Summary:
1.) Uninstall the Synaptics Driver
2.) Hide the Driver Update for Synaptics using this tool: https://support.microsoft.com/en-us/kb/3073930
3.) Go to Settings, Update & security, recovery, advanced start [restart now]
4.) Click troubleshoot, advanced options, startup settings [restart now]
5.) Press the number 7 to disable driver signature enforcement
6.) Download the latest synaptic's driver for Windows 8 from the website. http://www.synaptics.com/en/drivers.php
7.) Reboot the computer if necessary.
8.) Configure your mouse settings to your liking.

How do you disable text cursor movement when scrolling horizontally with a tilt wheel or touchpad; or rather, how do you make these horizontal scrolling actions only scroll horizontally and nothing else?

Frequently when I use a touchpad or tilt wheel mouse to scroll horizontally, the web page does not scroll at all. Instead, the text cursor moves left or right. If the text box is off-screen, the page will jump to it, losing the spot on the page I was reading. This happens way too often given the sensitivity of touchpads and tilt wheel mice.
I'd like to just disable the cursor movement function of the horizontal scroll. I don't feel that it is useful and it actually hurts my web browsing experience. I do not want to disable horizontal scrolling though; I just want it to always scroll horizontally and do nothing else.

You would make this a little easier if you posted a link to the page.
Most of the jump seems to be some extra padding or margin between the tabs when you rollover, but I am not able to find it. Is there any other css that is governing this page? I did remove a couple of set of tags you had and it improved the jump, but it is still there.
If the page is live, run it through the validator http://validator.w3.org/ , fix whatever errors it finds, if you still have the jump, post a link to the page and the issue might get found.
Gary

[UNSOLVED] Synaptics Touchpad & Firefox: Horizontal Scroll

Similar Messages

Maybe you are looking for