Unspecified Error upgrading to 2.0.2

I've got a 3G and upon trying to upgrade to 2.0.2 I got an "unspecified error" and am now in the process of restoring. Anyone else see this before?

OK, I just got around the issue by doing the following.
1. Make sure iPhone is detached from PC/MAC.
2. Hold down the lock button on the top of the phone, while doing so push the return to main menu button.
3. After 5-10 seconds the phone will reboot directly to the Apple logo. After a few moments you'll get to the lock screen / main menu.
4. Connect iPhone to PC/MAC.
5. It should back up and synch, let it do so.
6. Re-attempt to apply update.

Similar Messages

Failed to set Subscriptions on the WSUS Server. Error:(-2147467259)Unspecified error

Recently restored SCCM 2012 SP1 from Sever 2008 R2, to Server 2012 R2. I had Updates Publisher installed on old 2008 Server with Firefox and Chrome imported into Configuration Manager. Since I have upgraded I am no longer able to sync updates with Microsoft.
WCM.log says:
Category Product:44048288-2aac-b2b5-3730-fc020622ea05 (Firefox) not found on WSUS
Category Product:cc5cb1bb-6b87-94ae-f96a-f758195112a7 (Chrome) not found on WSUS
Subscription contains categories unknown to WSUS.
Failed to set Subscriptions on the WSUS Server. Error:(-2147467259)Unspecified error
STATMSG: ID=6603 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=wdlsccmpri.aarcorp.com SITE=AAR PID=2788 TID=4668 GMTDATE=Mon Feb 17 18:22:43.654 2014 ISTR0="wdlsccmpri.aarcorp.com" ISTR1=""
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=
I have gone to deselect these products from syncing in Administration> Site > Configure Site Components >Software Update Point Products Tab. They are not there. Any help on getting SCCM to sync updates would be greatly appreciated.

PROBLEM
=========
Unable to sync after moving the Primary site server to different OS.
CAUSE
=======
Issues with the product and classification setup in the SUP after the restore.
RESOLUTION
===========
Ran below query to check if we have reference to Firefox and Chrome categories in the database.
QUERY:
select CategoryInstance_UniqueID, CategoryInstanceName
from fn_ListUpdateCategoryInstances(9) cat
where cat.AllowSubscription=1 and cat.IsSubscribed=1 and cat.IsParentSubscribed=0
order by cat.CategoryInstance_UniqueID
RESULT: [Along with other products we found Chrome and Firefox]
Product:44048288-2aac-b2b5-3730-fc020622ea05 Firefox
Product:cc5cb1bb-6b87-94ae-f96a-f758195112a7 Chrome
Ran Select Query
select * from CI_CategoryInstances where categoryinstanceid in
(select categoryinstanceid from CI_LocalizedCategoryInstances where LocaleID = 9 and CategoryInstanceName = 'Firefox'or
CategoryInstanceName = 'Chrome')
RESULT:
CategoryInstanceID CategoryInstance_UniqueID CategoryTypeName DateLastModified SourceSite ParentCategoryInstanceID IsDeleted rowversion
16777523 Product:cc5cb1bb-6b87-94ae-f96a-f758195112a7 Product 2013-11-27 21:05:23.000 AAR 16777522 0 0x0000000006B08673
16777549 Product:44048288-2aac-b2b5-3730-fc020622ea05 Product 2013-11-27 21:05:23.000 AAR 16777536 0 0x0000000006B08676
Ran Select Query
select * from CI_LocalizedCategoryInstances where LocaleID = 9 and CategoryInstanceName = 'Firefox'or
CategoryInstanceName = 'Chrome'
RESULT:
CategoryInstanceID LocaleID CategoryInstanceName rowversion
16777523 9 Chrome 0x0000000006B08674
16777549 9 Firefox 0x0000000006B08677
We did find Chrome and Firefox items in the database.
We need to delete these items in the database.
We used below queries to delete the reference from the database.
delete from CI_CategoryInstances where categoryinstanceid in
(select categoryinstanceid from CI_LocalizedCategoryInstances where LocaleID = 9 and CategoryInstanceName = 'Firefox'or
CategoryInstanceName = 'Chrome')
delete from CI_LocalizedCategoryInstances where LocaleID = 9 and CategoryInstanceName = 'Firefox'or
CategoryInstanceName = 'Chrome'
After deleting performed Scheduled Sync. Was successful

Premiere CS6 + Yosemite + R3D "An unspecified error occurred while performing a conform action"

Hi there!
I seem to have an issue with Premiere Pro CS6 and Yosemite:
I have a Premiere project made in Premiere 6.0.5 composed entirely of R3D media. While running Mavericks 10.9.5, everything seemed to work just fine. I could play the timeline with or without rendering and I didn't have any error messages to speak of. After doing some research and finding out that CS6 works fine in Yosemite 10.10, I decided to take the plunge and upgrade last night. Today, I opened up the same Premiere project and I got the infamous "An unspecified error occurred while performing a conform action" error message for seemingly every R3D file in the project, and I could not play the timeline without rendering every frame.
I went back to the install disc and restored Premiere to the original 6.0.0, but that didn't help. So while in Yosemite, I updated Premiere back to 6.0.5 and found myself (unsurprisingly) with the same issue. I have a backup of Mavericks 10.9.5 that I can easily revert to, but I'd like to figure out what's going on! Yosemite is the only variable that changed, but I want to figure out what to do to allow Premiere Pro CS6 + Yosemite + R3D files to all play nicely together.
Please let me know if I can provide any more information or if there's anything I can do to get this up and running again.
Thanks!
Andrew

Update from Adobe's Tim Kurkoski (on another thread):
I have verified this problem. After Effects CS6, Premiere Pro CS6, and Adobe Media Encoder CS6 experience problems with RED .r3d files on Mac OS X 10.10 Yosemite.
More specifically, the ImporterREDServer process used by these applications is failing to launch or crashing. You may be able to import and use some .r3d files for a short time, but once the ImporterREDServer process crashes, frames from imported files won't be returned, and importing new files will result in error messages.
We are investigating the problem.
This problem does not occur in the CC or CC 2014 versions of After Effects, Premiere Pro, or Adobe Media Encoder on Mac OS X 10.10 Yosemite. If you do not have access to these versions, my suggestion for workarounds are to transcode the .r3d files to a different format (ex., QuickTime with ProRes or other high quality intermediate codec) or roll back to Mac OS X 10.9.
Fingers crossed for an update!

Unspecified Error in IE 6.0 when page renders.

Hello,
I'm trying to export my object and download it as a XML file. I have done this with ServletOutputStream and it works fine in XP but when i tried it in Windows 2000 ( IE 6) I'm getting an Unspecified Error (JS Error) after clicking Save in Open/Save dialog. I found the root cause of the problem from the site http://bytes.com/groups/javascript/153397-javascript-unspecified-error , which mentioned that reference to current document object is lost after click Save. Also mentioned the solution as assign the document object to a global variable and use the variable instead of document object through out the page. Since JSF implements some JS code in the JSP page to render the UI components in the page using document object I'm getting this error. But i don't know how to change the document object used by JSF to render the page. Any suggestions how to do that?
Regards,
Suresh

There are also a lot of folks who automatically create the newest, best PDF with the latest technology and assume everyone will be able to read it. This will work for a lot of things, but there are typically features in the newer PDF versions that cause errors in older systems, such as you are getting. There are 3 choices: 1. Ask the creator to create a new version that is AA6 compatible (either in the creation process or using Reduce File Size or PDF Optimize); 2. Upgrade your AA6 to a newer version. I am not sure how far back AAX will go for upgrade -- typically 2 or 3 versions; 3. Download the new Reader and deal with compatibility issues between AR and your AA6 (there are bound to be a few -- but are typically workable once you figure out how. This is not an Adobe recommended solution).

Session.setDebug(true) displays "Unspecified error"

Hi All,
How can find out what the below "Unspecified error" is? Is there any other way of debugging JavaMail in more detail or is this an error message coming directly from the Echange Server that I need to trace back to Exchange?
Thanks,
Sinan Topuz
DEBUG: getProvider() returning
javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems,
Inc]
* OK Microsoft Exchange IMAP4rev1 server version 5.5.2653.23 (server_name.xxx.com)
ready
A0 CAPABILITY
* CAPABILITY IMAP4 IMAP4rev1 IDLE LITERAL+ LOGIN-REFERRALS MAILBOX-REFERRALS
NAMESPACE AUTH=NTLM
A0 OK CAPABILITY completed.
A1 LOGIN username password
A1 OK LOGIN completed.
A2 LIST "" "Public Folders/BRANCH ALARMS"
* LIST () "/" "Public Folders/BRANCH ALARMS"
A2 OK LIST completed.
DEBUG: connection available -- size: 1
A3 EXAMINE "Public Folders/BRANCH ALARMS"
A3 NO Unspecified error
Unhandled exception : null
java.lang.NullPointerException
at javax.mail.Flags.<init>(Flags.java:163)
at com.sun.mail.imap.protocol.MailboxInfo.<init>(MailboxInfo.java:80)
at com.sun.mail.imap.protocol.IMAPProtocol.examine(IMAPProtocol.java:351)
at com.sun.mail.imap.IMAPFolder.open(IMAPFolder.java:752)
at Branchmonitoring.monitoralarm(Branchmonitoring:60)

You need to ask Microsoft or your server administrator.
Possibly the folder you're trying to open is not a mailbox
that contains messages, but instead is a folder that contains
other mailboxes. Did you check the type of the folder before
trying to open it?
BTW, the NullPointerException was fixed in JavaMail 1.3
so you must be using a pretty old version of JavaMail.
You might want to upgrade to a newer version, which at
least should cleanly fail to open the folder.

Unspecified Error while deleting a component

Hi
I have a component with a <form> tag; which refers to a servlet which is registered with a particular path.
When i try to delete the component I am getting "Unspecified Error" - error. Once i run the page am not able to select the component to delete also.
Any help will be appreciable
Thanks
Veena

Hi Veena,
Look at your log file to get complete stack trace to find the cause.
As a workaround, In crxde go to the page under par identify your component. Then delete that node & save the changes. An example to delete productlist from geometrixx product page is [1].
[1] /content/geometrixx/en/products/jcr:content/par/productlist
Thanks,
Sham

Won't let me login, error message "unspecified error"

Every time I try to login with my sync account (that I'm already sure works because I've used it on multiple computers and Firefox profiles), then I get an error message that says "unspecified error." I know that all my information is correct, and I even tried to create another account on a different computer, which did the same thing. When I tried to follow the steps on [https://support.mozilla.com/en-US/kb/Firefox+Home+does+not+work https://support.mozilla.com/en-US/kb/Firefox+Home+does+not+work], then, when I opened the options dialog, the expandable section that says "Manage Account" was grayed out, so I couldn't change my password or my secret phrase. Please help with this issue.

Yes I'm getting exactly the same.
'Unspecified Failure' message when trying to login on iPhone Firefox Home, and greyed-out 'Manage Account' drop down box on Firefox PC Browser.

Firefox won't start, and I cannot download the new version as it keeps saying 'unspecified error' when I try

We (my wife and I) downloaded the new version of firefox, but found that it was being very jerky and slow and just didn't really like how it looked. My wife did a system restore on our computer to see if that helped, and since then firefox hasn't started at all - if we double click on the icon, it looks like it's doing something and then it just doesn't open. Whenever I try and download it again it comes up with 'unspecified error'. I've tried deleting all the firefox program files from my computer first, but there is one file in conponents that it won't let me because I need administrator permission. It doesn't seem to make any difference anyway.

Using "System Restore" can cause your Firefox installation to get corrupted because not all files are restored (only files in a white-list), so be cautious with using System Restore.<br />
You need to (re)install software that was affected.<br />
Remove the Firefox program folder (C:\Program Files\Mozilla Firefox\) before reinstalling a freshly downloaded Firefox copy to do a clean install.
You can find the latest Firefox release in all languages and for all Operating Systems here:
*Firefox 11.0.x: http://www.mozilla.org/en-US/firefox/all.html
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Word couldn't send mail because of MAPI failure, Unspecified error.

This issue is crossposted in Microsoft Answers Word and OUTLOOK. I am posting here in hopes that someone at Mircrosoft may have a solution or at least elevate the issue to someone who does.
http://answers.microsoft.com/en-us/office/forum/officeversion_other-word/word-could-not-send-mail-because-of-mapi-failure/f62678fe-ef1d-42b5-8cfe-1e43d6a1d609
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/word-couldnt-send-mail-due-to-mapi-failure/1f03cf74-9258-411b-9e2b-e41cb5006d71
I dabble with VBA and write and maintain several amateur Word Add-Ins. Accordingly, I have Word 2003, 2007, 2010 and 2013 installed on my PC. They get along fine. However, I am unable to "Share" or "Send" an open Word
document as an E-mail attachment in any version! In each case Word returns an error mesage "Word couldn't send mail because of a MAPI failure, Unspecified error (the same issue occurs with Excel and Powerpoint except the error dialog is a bit different.)
Using Word 2003, I (CAN) "Send to (Mail recipient for review)" in which case OUTLOOK is opened with the document as an attachment. I can also "Send to Mail Recipient" from Windows Explorer, in which case the Word file is attached to
an OUTLOOK message, and I can create an instance of OUTLOOK and send mail from Word using VBA.
I have repaired all Office versions. I have removed the registry keys for all office versions and repaired all versions again. I have run "fixmapi" until I am blue in the face. I have renamed the MAPI32.DLL files and ran sfc \scannow
to ensure that the MAPI32.DLL file is not corrupt. In view of these actions and in view of what I can do, something tells me that the MAPI files are fine.
So what is this "Unspecified error?" This problem is rife on the internet and most of the "canned" solutions have been marked "Answered" by some MS support engineer. These "canned" solutions might have
fixed the issue at one point, but they don't work now. At least not for me.
Thanks.
Greg Maxey Please visit my website at: http://gregmaxey.mvps.org/word_tips.htm

Hello Greg,
I noted that there are 2 knowledge articles that describe scenarios where you may encounter this error.
KB 291152 You receive a "Word couldn't send mail because of MAPI failure" error message when you try to send a Word document as an e-mail attachment in Word 2002
http://support.microsoft.com/kb/291152/EN-US
KB 929362 You cannot send a file by clicking Send in a different program when Outlook 2007 is running as administrator
http://support.microsoft.com/kb/929362/EN-US
Please let me know the following:
1. What version of Outlook are you using?
2. Do you have Outlook open when you attempt the File > Share > Email as attachment from Word? If not, does the error occur if you open Outlook, open Word and then try to send the email?
3. If you close/reopen Word and then try the send again, do you get the same error?
4. Are you running either Outlook or Word in an elevated mode?
5. What happens if you start both Outlook and Word as "Run As Administrator". You may have to right-click each applications' .exe file to be able to choose the "Run As Administrator" option.
6. Do you get the same error when using File > Share > Email as attachment using Excel?
7. In Internet Explorer, open the Internet Options. On the General tab within the browsing history, delete your temporary Internet files and website files
8. Does the issue occur in selective startup mode?
Steps to setup selective startup mode:
Click on the Windows Start button, in the Search box type msconfig and then hit enter. This should open up the System Configuration Utility. Make the following adjustments within each tab.
Services Tab:
- Check the option 'Hide All Microsoft Services'
- Click on button 'Disable All'
Startup Tab:
- Click the button 'Disable All'
- Go back through the list and enable any Microsoft items
Click Ok. It will say “You must restart your computer for some of the changes
made by System Configuration to take effect”. Hit the ‘Restart’ button.
When the PC reboots try to run your test again.
To return back to a normal boot launch msconfig again and choose 'normal startup' on the general tab, click Ok and then reboot the PC.
Regards,
Dennis

Office Home and Student 2010 has stopped working Unspecified Error has occurred. Request cannot be processed at this time. Please try again later ( 0x8007000D )

My office is saying its an unlicensed product and it prompts me to re install. It come up with Microsoft Activation Wizard then when I select to activate software via the internet an error comes up saying:
Unspecified Error has occurred. Request cannot be processed at this time. Please try again later ( 0x8007000D )
Please can you help me? I have tried pressing shift and right click an using system administrator but still not working. I've called the UK helpline and have been cut off twice after repeating myself to the person on the other end. May be easier
to try and get some assistance on here?

Hi,
This error can indicate a permissions issue in the registry and/or other operating system issues.
Here is a
blog post which descripts some fixes to this specific error:
Check the Device Manager first to determine whether the issue was caused by an underlying operating system issue.
If it's not an issue with the operating system, try the rest steps descripted in the blog to troubleshoot the issue.
Please have a try and feel free to post back with any findings.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Unspecified error while installing sql server management studio 2012.

HI,
I am trying to install microsoft sql server 2012 service pack 1 management studio express. Its throwing "unspecified error".
I am using "sqlmanagementstudio_x64_ENU.exe". Iam using .net framework 3.5.1.
Repies will be appreciated.
Thanks,
Rakesh.

Hello,
I have seen in the past that error and is generally related to remnants
from previous installations of SQL Server. Manually uninstalling the remnants may help as explained on the following resources:
https://connect.microsoft.com/SQLServer/feedback/details/552350/cannolt-install-sql-server-2008-database-engine-reporting-services-and-bids-en-windows-7-ultimate-64-bit
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2890e27c-2848-440c-a755-bb2a81769b5b/sql2008-developer-instalation-fails-on-my-laptop-with-window-7-ultimit-x64?forum=sqlsetupandupgrade
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Unspecified error while opening Hfm application

Hi Guys,
I am working on HFM Classic Consolidation application ver 9.3.1 with oracle 10g as database and Web Logic as Web Server.
When I logon to my application I get the following error
Unspecified error
*<BR> An unknown error has occured in the HsxSQLHelper*
object. <BR> Error occured while initializing
HsvSystemInfo Object
*(-2147220938)*
What could be the reason of such an error.
Any early response on this would be highly appreciated as this matter is urgent
Bunny

Hi,
The UDL file containing connection details to HFM repository database has been renamed or moved.
HFM is unable to communicate to the database as it cannot find the UDL file referenced in the Windows registry key: HKEY_LOCAL_MACHINE\SOFTWARE\
Hyperion Solutions\Hyperion Financial Management\Server\SystemDataLinkFile
Cheers!
J

"An unspecified error occurred while performing a conform action on the following file:"

Has anyone else gotten this error in any of their projects? I've searched around Adobe support pages and elsewhere on the internet, but have found nothing.
It comes up in the events window and I can't even read what file it's talking about because it's on the next line, but the error message only shows one line and I haven't figured out a way to expand it.
I'm not even sure if it's causing any problems, or not (the project seems to work ok). This message shows up twice, as a red circle with an 'X' in it, but I also get the following message numerous times referring to a large amount of my .avi files:
"File importer detected an inconsistency in the file structure of filename.avi. Reading and writing this file's metadata (XMP) has been disabled."
That message shows up as a yellow triangle with an '!' in it. Since I haven't been able to turn anything up about these messages, I figured I'd ask here and see if anyone knew what was going on, how to fix the problem or if I should even worry about them.
Thanks.

I am having this problem now when i use dynamic link from Premiere to after effects. I copy the footage from premiere then paste into after effects, i add alittle text maybe some light rays etc save it then go back to premiere. Then i get this message "An unspecified error occurred while performing a conform action on the following file C:\Caches\Media Cache Files\text comp 1 48000.cfa." does anyone have any idea as to what this is? i have had a few problems using the dynamic link from premiere to after effects problems such as Premiere freezing, not playing the after effects comps back in real time, crashes etc. Its as if the 2 programs dont like the dynamic link.
Im running Master Collection CS5 & CS 5.5 on running on a 24gb ram, Intel Core i7 950 @3.07GHz PC with a NVIDIA GeForce GTX470 graphics card.

PRE10 "Unspecified error occurred while performing a conform action on the following file:..."

I really need some help!
I am making a short video on premiere elements 10 and I seem to get this conforming error everytime I open the project and I cannot save it either!!
"Unspecified error occured while performing a conform action on the following file:
File0002.AVI 48000.CFA"
This happens everytime I open premiere elements 10 to lots (or all) of my video clips and I can't find any help in the adobe forums or anywhere else online!
Also, I want to save this video as an AVI file, but when I try to export it, it says it has finished quite quickly and has not even added anything to click on or when it does, it does not play. Sometimes it says it has finished then comes up with: "Error compiling movie. Unknown error". one of these happen everytime that I try to save it.
Lots (or all) of my avi files come up as this same conforming error when I load the project and I have no clue as to what to do!...
It also crashes nearly everytime after these compiling errors!
My computer is running windows 7 ultimate OS
Please help!
Please...!

Operating System
System Model
Windows 7 Ultimate (build 7100)
Gigabyte Technology Co., Ltd. M61PME-S2P
Enclosure Type: Desktop
Processor
Main Circuit Board
2.80 gigahertz AMD Athlon X2 240
256 kilobyte primary memory cache
1024 kilobyte secondary memory cache
64-bit ready
Multi-core (2 total)
Not hyper-threaded
Board: Gigabyte Technology Co., Ltd. M61PME-S2P
Bus Clock: 200 megahertz
BIOS: Award Software International, Inc. F2 12/30/2008
Drives
Memory Modules
320.07 Gigabytes Usable Hard Drive Capacity
125.82 Gigabytes Hard Drive Free Space
TSSTcorp CDDVDW SE-S084C USB Device [Optical drive]
SAMSUNG HD321HJ SCSI Disk Device (320.07 GB) -- drive 0, s/n S13RJ90SB04688, SMART Status: Healthy
1984 Megabytes Usable Installed Memory
Slot 'A0' has 2048 MB
Slot 'A1' is Empty
Local Drive Volumes
c: (NTFS on drive 0) *
319.97 GB
125.76 GB free
d: (NTFS on drive 0)
105 MB
65 MB free
* Operating System is installed on c:
The media files are avi and are in my videos folder (videos-windows 7)

Windows 2008 r2 SP1 installation failed with unspecified error 0x80004005 - E_FAIL

Hi Team,
We have SQL data base server with Win 2008 r2 OS.When trying install Sp1 it fails after reboot with unspecified error -0x80004005 - E_FAIL.
Server having snap drive connected with 6 SQL data bases. Sp1 installation running 7 hrs and falling after couple of reboot.
Any help appreciated.CBS log attached.
================================ 2015-01-24 18:48:22, Info CBS Starting TrustedInstaller initialization. 2015-01-24 18:48:22, Info CBS Loaded Servicing Stack v6.1.7601.17514 with Core: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17514_none_678566b7ddea04a5\cbscore.dll
2015-01-24 18:48:23, Info CSI 00000001@2015/1/24:18:48:23.137 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fee8d4e94d @0x7fee9079839 @0x7fee90434d3 @0xff03e94c @0xff03d769 @0xff03daff) 2015-01-24 18:48:23, Info CBS Could not load SrClient DLL
from path: SrClient.dll. Continuing without system restore points. 2015-01-24 18:48:23, Info CSI 00000002@2015/1/24:18:48:23.139 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fee8d4e94d @0x7fee90c6806 @0x7fee9092a9c @0x7fee90435a9 @0xff03e94c @0xff03d769)
2015-01-24 18:48:23, Info CSI 00000003@2015/1/24:18:48:23.139 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fee8d4e94d @0x7fee9988728 @0x7fee9988856 @0xff03e444 @0xff03d7ae @0xff03daff) 2015-01-24 18:48:23, Info CBS Ending TrustedInstaller initialization.
2015-01-24 18:48:23, Info CBS Starting the TrustedInstaller main loop. 2015-01-24 18:48:23, Info CBS TrustedInstaller service starts successfully. 2015-01-24 18:48:23, Info CBS SQM: Initializing online with Windows opt-in: False 2015-01-24 18:48:23, Info CBS
SQM: Cleaning up report files older than 10 days. 2015-01-24 18:48:23, Info CBS SQM: Requesting upload of all unsent reports. 2015-01-24 18:48:23, Info CBS SQM: Failed to start upload with file pattern: C:\Windows\servicing\sqm\*_std.sqm, flags: 0x2 [HRESULT
= 0x80004005 - E_FAIL] 2015-01-24 18:48:23, Info CBS SQM: Failed to start standard sample upload. [HRESULT = 0x80004005 - E_FAIL] 2015-01-24 18:48:23, Info CBS SQM: Queued 0 file(s) for upload with pattern: C:\Windows\servicing\sqm\*_all.sqm, flags: 0x6 2015-01-24
18:48:23, Info CBS SQM: Warning: Failed to upload all unsent reports. [HRESULT = 0x80004005 - E_FAIL] 2015-01-24 18:48:23, Info CBS No startup processing required, TrustedInstaller service was not set as autostart, or else a reboot is still pending. 2015-01-24
18:48:23, Info CBS NonStart: Checking to ensure startup processing was not required. 2015-01-24 18:48:23, Info CSI 00000004 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL, phase = 0, pdwDisposition = @0x136f6c0
2015-01-24 18:48:23, Info CSI 00000005 Creating NT transaction (seq 1), objectname [6]"(null)" 2015-01-24 18:48:23, Info CSI 00000006 Created NT transaction (seq 1) result 0x00000000, handle @0x23c 2015-01-24 18:48:23, Info CSI 00000007@2015/1/24:18:48:23.144
CSI perf trace: CSIPERF:TXCOMMIT;1211 2015-01-24 18:48:23, Info CBS NonStart: Success, startup processing not required as expected. 2015-01-24 18:48:23, Info CBS Startup processing thread terminated normally 2015-01-24 18:48:23, Info CSI 00000008 CSI Store
3877440 (0x00000000003b2a40) initialized 2015-01-24 18:48:23, Info CBS Session: 30423046_1416810351 initialized by client RMT. 2015-01-24 18:48:24, Info CSI 00000009@2015/1/24:18:48:24.057 CSI Transaction @0x1761b90 initialized for deployment engine {d16d444c-56d8-11d5-882d-0080c847b195}
with flags 00000002 and client id [26]"TI5.30423046_1416810351:1/" 2015-01-24 18:48:24, Info CSI 0000000a@2015/1/24:18:48:24.059 CSI Transaction @0x1761b90 destroyed 2015-01-24 18:48:24, Info CBS Appl: DetectUpdate, Package: Microsoft-Windows-SecureStartup-OC-Package~31bf3856ad364e35~amd64~~6.1.7600.16385,
Remote Parent: DirectoryServices-DomainController-Tools, Intended State: Staged 2015-01-24 18:48:24, Info CBS Appl: DetectUpdate, Package: Microsoft-Windows-SecureStartup-OC-Package~31bf3856ad364e35~amd64~~6.1.7600.16385, Remote Parent: DirectoryServices-DomainController-Tools,
Intended State: Staged 2015-01-24 18:48:24, Info CBS Appl: Evaluating applicability block(detectUpdate part), disposition is: Staged, applicability: NotApplicable, result applicability state: Staged 2015-01-24 18:48:24, Info CBS Appl: Package: Microsoft-Windows-SecureStartup-OC-Package~31bf3856ad364e35~amd64~~6.1.7600.16385,
Update: BdeAducExtTool, Applicable: NeedsParent, Dis 2015-01-24 18:48:24, Info CBS Appl: DetectUpdate, Package: Microsoft-Windows-WMI-SNMP-Provider-Package~31bf3856ad364e35~amd64~~6.1.7600.16385, Remote Parent: SNMP, Intended State: Installed 2015-01-24 18:48:24,
Info CBS Appl: Evaluating applicability block(detectUpdate part), disposition is: Staged, applicability: Applicable, result applicability state: Installed 2015-01-24 18:48:24, Info CBS Appl: Package: Microsoft-Windows-WMI-SNMP-Provider-Package~31bf3856ad364e35~amd64~~6.1.7600.16385,
Update: WMISnmpProvider, Applicable: Applicable, Dis 2015-01-24 18:48:24, Info CBS Appl: DetectUpdate, Package: Microsoft-Windows-IIS-WebServer-Package~31bf3856ad364e35~amd64~~6.1.7600.16385, Local Parent: IIS-WebServerRole, Intended State: Staged 2015-01-24
18:48:24, Info CBS Appl: Evaluating applicability block(detectUpdate part), disposition is: Staged, applicability: NotApplicable, result applicability state: Staged 2015-01-24 18:48:24, Info CBS Appl: Package: Microsoft-Windows-IIS-W

Appreciate your suggestion Dave,
Any idea what could be cause of this failure.?Do you see anything from the CBS logs.
This server attached with SNAP drive luns,is there something or SQL application preventing this installation ?
After reboot it revert the installation...it shows "Failure config service pack..reverting changes,do not not turn off your computer".
Surprisingly it happens both of our SQL data base server.
Do you think Increasing MaxNumFilters to
14 shall work ?
=====================
=================================CheckSUR.Log==========
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 26.0
2015-02-01 09:37
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 555
No errors detected

Unspecified Error upgrading to 2.0.2

Similar Messages

Maybe you are looking for