Unspsc code configuration in Material master

Hi Guru's,
My client has using UNSPSC code heirarchy in the material master.
There are four levels of heirarchy. I configured in the classification view of the material master accordingly to the heirarchy. Now I need to genarate a report based on the material group and that report should pull the characterstic and its value correctly at a specified heirarchy level.
Is there any standard report to pull the heirarchy level for the material group?
How can I achieve this
Appreciate all the help
Rrds,
Shiva

Hello Shiva,
I'm looking for exactly what you stated above ( 2 years ago... ), but I'm a step behind you.
Can you refer me to configuration doc for setting up material master based on UNSPSC code hierarchy? Do you do this through WG21, entering commodity level in Material group and then Class/Family/Segment in MG Hierarchy level field ?
Also, did you find or receive any guidance on standard report to pull hierarchy level for material group ?
Any guidance on this is much appreciated.
Kim

Similar Messages

  • CONFIGURATION OF MATERIAL MASTER

    Dear cons
             I want to make some of the field hide, required in the material master.So I tried to use the T-code- OMS9.After entering the T- code, First line contains field selection group. At the bottom of the table I saw two radio button sort entries by field reference & field selection. And in the middle portion of the table .if we make double click, then in the second screen Hide, required, optional as well selection group fields from 1 to 240 are available. I want to make one field optional where it was in a hide mode. The selection 1-240 no. is available. My question is for any field to make optional it is necessary to make changes 1-240 times in the selection group? In the middle portion of the table in where used list indicator ,some plants are assigned. Where is the setting .Another question is field selection group are available from 1-101 times. How can we know which field selection group is appropriate for which field. In the T-code- OMS3 One field reference field is available. What is the use of it. In T-code- OMS9 in the middle portion of the table one field reference field is available. I saw it is different from the field reference field from T-code- OMS3. PL. help me.
    .nrk

    To every material type one field reference key is assigned and in a field reference key there are number  of fields
    every field is assigned to a field selection group
    and possibly in a field selection group there are no. of fileds so if you make any of the field seection group as hide/mandatory so it will be applicable to all the fields so
    if you want to make a particular field as mandatory then assign a free field selcetion group to that field via tcode i think OMSR and then make this field selection group as mandatory via OMS9 for the particular field reference key .
    Edited by: Sap: IN on Apr 6, 2009 3:46 PM

  • Problem in configuration of material master

    Dear cons
    I want to make  quality management control key field is a required field in material master. so in T-code-
    OMSR I selected field selection group-99.& make it as a required field.At the time of creating material master  the system activated other field like certificate type & target QM system as required field along with QM CONTROL KEY.How can we make it only QM CONTROL KEY as a required not other.
    nrk

    THe field name for certificate type is QZGTP... Selct the right arrow in the transaction OMSR and make it as optional in MM01..
    Hope this helps..
    In a similar way try to do for Target system...QSSYS... make it as optional or hidden for MM01..
    Hope it will silve ur problem...
    karthick

  • CIN Configuration in Material Master

    Hi Experts,
    I have maintained all the settings related to CIN in the path SPRO >> Logistics General >> Tax on Goods Movements >> India
    But in the material master the fields to maintained the chapter ID is not appearing in the "Foreign Trade: Import Data".
    Please let me know
    1. if I am looking at wrong place
    2. What other settings are required in material master and vendor master etc.
    Please note: I was given a PDF document for CIN settings but the doc doesnt contain the additional settings that are required to be done in the vendor and material master.
    Thanks in Advance,
    Uday Kumar.

    Hello
    There is no pricing procedure in CIN. As far as CIN is concern it is only relevant to Excise duty, Edu. Cess on Excise duty and Higher Edu. Cess as far as sales point of view in addition to special excise duty or additional excise duty.
    Accordingly condition types are created in Tax procedure TAXINJ and the SD pricing procedure. These condition types once created in Tax Procedure get reflected in Tax Codes which can be saved in Condition record of pricing procedure which determine the excise taxes. Also these taxes are to be maintained in J1ID to get determine in Excise Invoice.
    Hence there is only one pricing procedure.
    Regards
    Prashant

  • Control Code field in Material master- Foreign Trade imports tab

    Hello Experts,
    I am trying to understand the purpose of Control Code(MARC-STEUC) field in Material master- Foreign Trade imports tab. I am also interested in knowing where does this field appear in our PO.
    Please help..
    Manish

    Normally control code specifies the norm to follow by the supply plant for a sale of exposrts. each contry will have a set of rules to get follow as a stuatory . this code specifies the rules or certificates.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/93/7443a5546011d1a7020000e829fd11/frameset.htm
    may be comes in a sale order.
    Regards

  • How to transport number range group Configuration in Material Master

    Hi,
    I have this query regarding how to transport number range group in material master from one server to another.
    Problem: There was no number range assignment done for a particular material type. So, i assigned the particular mat. type to a group which had some number range intervals with the help of T-Code MMNR.
    But when i want to transport this config. to other sever, it is only transporting the interval but not the assignment done to that group. In the menu bar only Interval transport option is there.
    Can anybody help me with this I hope the query is clear.
    Regards
    Vivek

    Hi,
    Number range objects can be transported using Workbench requests.
    Thanks
    Kishore

  • T.code for extend material master to  plant

    Hi
    Is there any t.code  (other than mm01) to  extend the material master to plants?
    regards
    sesidhar

    Hi
    RAj
    THANK U so much fro ur information ,,and i want extend to storagelocation...i think it is not possible in MM50 T.code
    in mm50 stor.loc option is not there
    regards
    sesidhar

  • Configuration of material master idoc interface to RFID

    Hi,
    We are planning to have SAP RFID. Once operational, do we need to send SAP Material Master field data to RFID? For ex; when the description of a material is changed, do we need to send this new information to RFID system through Idoc (or some other way)?
    Regards

    Yes. This is available in SAP AII which is configurable. Material Idoc is the best way. Activate change pointers generally (Customizing for Logistics - General -> Supply Chain Planning Interfaces (SCPI) -> Auto-ID Backend Integration -->  IDoc Processing --> Material Master Data IDocs ->  Activate Change Pointers Generally).
    Hope this helps.
    Thanks,
    Naveen

  • Tax code missing in material master

    Hi Gurus,
    When I try to create a outbound delivery system displays message u201CMaterial not defined for sales from Indiau201D, the long text of message says that tax codes are not maintained in material master.
    But in material master sales view I am unable to maintain values (no values in possible entries option F4).
    Please advice.
    Regards,
    Prasad svs

    you have an entry there for India in your sales org data of Material master, but this entry is without tax code, correct?
    Or don't you even have a line for India there?
    In case 1) create the tax classfication in IMG > SD > basic data > taxes > tax relevance of master data
    If case 2) allocate the sales organisation to you India plant in IMg > Enterprise structure > Allocation > Sales org to plant

  • Sales Tax code mandatory in Material Master

    Hi,
    I am into developement and trying to create a material.In the Sales View1 tab it shows me 2 entries under Tax data.
    One entry for DE and other entry for the country I am working for.
    All the sttings seems to be similar vis a vis Sandbox where I could see only one entry.
    What could be the reason.I don't want to have DE entry for tax there.
    Also, I have to enter the tax code there.I am using zero tax(v0) and it asks me to put it there everytime.
    How to make it optional.I do not remember how it was done in Sandbox as it does not stop me there.
    It's urgent.Please suggest.
    Thx in advance
    Regards,
    manOO

    Hi Steve,
    thx for that.I have created one procedure for my country and have assigned it to country coe.I have done all the settings similar to Sandbox.I have created zero tax code since there is no tax involve for some reasons but i guess even there is no yax one has to create this calculation procedure and assign it to country code and then subsequently via FTXP create tax code for zero tax and then use it when required(for example at the time of invoice)
    what I did not understand as asked earlier is that why system is showing me 2 tax codes DE and AE in sales 1 view ?and why it is showing me mandatory entry.
    Showing up of 2 entries is okay but then I have to enter zero tax in both the lines.That is why i asked how can I make it optional.
    Is there any way ?
    I tries to search in the material master field status... but the group 190 where i could see this tax cose field is already optional.
    What could be issing here ??
    Thanks in advance
    regards,
    manOO

  • Activating a CARE CODE field in Material Master

    Hi All,
    I need to activate one field CARE_CODE in MATERIAL MASTER. Can anyone guide me how to activate the same.
    Let me know if any additional details are required
    Regards,
    Raju

    Hello,
    if you display table MARA by transaction SE11, then do a doubleklick on include WRF_MARA_STY, then go to attributes-tab, you can see that this  include belongs to package MGW (Application development R/3 material master Retail).          
    It belongs to IS-Retail, and only visible on a standard system because parts on IS-Retail are embedded in Core.
    But you cannot make these fields visible on a non-IS-Retail-System.
    br, Gabor

  • EAN/UPC code in the material master

    Hi all,
    Does anybody have the scenario where the UPC number of a product is the same as the SCC number displayed on the container that holds this product with the difference being the EAN category and the leading zeroes? For example: UPC of a bottle is 080686001409 with EAN category = UC (length = 12 digits) and SCC of the case is 00080686001409 with EAN category = SC (length = 14 digits). The number is externally assigned. SAP does not let you enter these 2 codes in the master data. When you enter the second code, 00080686001409 and ctg SC for example, SAP automatically changes it back to the first code 080686001409 and maintains ctg SC. So now I have the same code with 2 different categories (and one of them u2013 SC u2013 has an incorrect length).
    Please let me know if you have this scenario and what you have done to solve it.
    Thanks in advance!

    Hi ,
    I am also facing the same problem. The system not allowed saving the same EAN/UPC number for multiple SKUu2019s with varying number of leading zeros.
    For example: UPC length 12 digits value like 085267207850 with EAN category Z3 and SCS length 14 digits value like 00085267207850 with EAN category Z5. The number is externally assigned. SAP does not let you enter these 2 codes in the master data. When you enter the second code, 00085267207850  and category Z5, SAP automatically changes it back to the first code 085267207850 and maintains category Z5. So now I have the same code with 2 different categories (and one of them u2013 Z5 u2013 has an incorrect length).
    Could you please let me know what you have done to solve it.
    Regards,
    Ismail

  • How to configure Material Master

    Dear Guru,
    May I know how the steps to configure material master?
    Thank you.
    Rgds,
    Goh Yen

    Hi,
    Follow the below steps for customization of material master
    1. Material Number:
    SPRO -> Logistic - General -> Material Master -> Basic Settings -> Define Output Format of Material Number
    TCODE: OMSL
    2. Define Field Reference:
    SPRO -> Logistic - General -> Material Master -> Field Selection -> Maintain field Selection For data Screens
    T CODE: OMS9
    3. Define Industry Sector:
    SPRO -> Logistic - General -> Material Master -> Field Selection -> Define industry Sectors and industry -sector- specific Field Selection
    T.Code:OMS3
    4. Material Type:
    SPRO -> Logistic - General -> Material Master -> Basic Settings -> Material Type ->Define attribute of material Type
    T.Code:OMS2
    (Select Material Type: ROH for ur raw material( example) copy it and renamed it to UR  RAW MATERIAL)
    5. Define Screen Sequence:
    SPRO -> Logistic - General -> Material Master -> Configuring the Material Master -> Define structure of Data Screens for each Screen Sequence
    T.Code:OMT3B
    (Select Screen Sequence: 21, copy it and renamed it to Z with any letter( Like ZA or ZB )
    6. Ordering Screen Sequence:
    SPRO -> Logistic - General -> Material Master -> Configuring the Material Master -> Maintain Order of main and Additional Screen
    T.Code:OMT3R
    7. Assign Screen Sequence to Industry Sector:
    SPRO -> Logistic - General -> Material Master -> Configuring the Material Master -> Assign Screen Sequences to User/Material Type/Truncation/Industry Sector
    T.Code:OMT3E
    8. Assign Field Reference to Plant:
    SPRO -> Logistic - General ->Material Master -> Field Selection -> Define Plant -Specific Field Selection and Plant -Specific Screen Selection
    T.Code:OMSA
    9. Define Material Group
    SPRO -> Logistic - General -> Material Master -> Setting for Key Field -> Define Material Group
    T.Code:OMSF
    10. Define Number Range of Material:
    SPRO -> Logistic - General -> Material Master -> Basic Settings -> Material Type ->Define Number Range for each Material Type
    T.Code:MMNR
    11. Define Purchasing Group:
    SPRO -> Material Management->Purchasing->Create Purchasing Group
    T.Code:OME4
    Regards,
    Biju K

  • Material Master Characteristic Configuration

    Hi Experts,
    I'd like to know how to configure the Material Master Maintenance MM01/MM02/MM03 tcodes to show the Characteristic Tab and all other tabs that can be activated. And also what are the configuration to consider when using the Characteristic Option for Maintenance.
    Thanks a lot!

    Hi,
    I am done with the configuration of OMS2, now I can see the Characteristic Tab in the Material Master (MM01/MM02/MM03). However, the user wants to display the Charateristic Tab with all the tabs. As when I choose the Characteristic Tab display, the other tabs for material master are now gone. How can I configure that the Characteristic Tab is a normal tab, under Material Master Maintenance/Display?
    Thanks for your help!

  • List of Codes In Material Master

    Dear Sir,
    How can we know the list of all codes created in material master according to there category like MRM ERM etc...
    If any one know good way pls answer soon
    Thanks & Regard
    Ajay Pareek

    Hi Ajay,
    If u are looking for Material list based on "Material Group" is maintained at Basic data view,
    Check with  std.report MM60 or table  MARA.
    If not so  please explain
    Regards
    pradeep

Maybe you are looking for