Unstable cursor
UNstable cursor
Try a reset. You will not lose any data. Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. Let go of the buttons and let the iPad start up.
if and when that suggestions doesn't work, don't be afraid to use the space that you are provided here in the forum in orde to post some details as to what happens, when it happens, where it happens, any noticeable pattern or any other information that might be helpful in solving your problem.
Similar Messages
-
As I type in Word or in apple mail It seems that where you rest your hand on right hand side of track pad, this makes the cursor jump back and highlights text that it jumped over. I wondered if it is easy to get at that area to see what is being pressed on and how it can be rectified. This would rule out the keyboard as when I type and not allowing my hand to rest on laptop, the problem does not arise.
[email protected]Hello Eustace
I removed the battery, but the problem was still there.
The problem occurs when I am typing and my hand/wrist is in contact with the body of the laptop just to the right side of the track pad. This seems with my hand resting on right hand side of track pad, this slight downward pressure onto some component inside laptop makes the cursor jump back and highlights text. I can simulate the problem by typing and not allowing my hand/wrist to touch body/frame of laptop, typing this way there is no problem. When I rub with my hand with slight downward pressure on the area just right of track pad, the problem occurs. You should be able to type with hand/wrist resting on laptop body without creating this problem. Is body of laptop too weak, which allows down ward pressure to make contact with some component underneath laptop body that creates problem? I tried without battery, but still had problem All help appreciated
Re: cursor / keyboard unstable -
How to cure unstable mouse cursor ?
After installing Snow Leopard I've had problems with the mouse cursor flying wildly to the edge of the screen, which makes retouching photos very difficult. Does anyone have any suggestions?
Have you checked Systems Prefs > Mouse, to see if the settings are as they should be? Especially, tracking, double click, scrolling etc which I have set around the middle of the slide bar, but you may prefer differently.
-
How can I correct Unstable, erratic mouse cursor movement
I currently have a dual boot setup with Windows 7 Pro 64 and XUbuntu 64 bit XFCE desktop. On random occasions, the mouse pointer will begin to float and or will not stay positioned on the spot selected. This occurs with or without an external mouse attached. The track pointer will not control the mouse and neither the left nor right keys just below the keyboard function. The drifting will stop sometimes when the center key at the bottom of the keyboard is pressed. The touchpad and its keys seem to work correctly. I have turned off both of these in the BIOS and have not had any problems. It seems to me that the problem may be with the keyboard. Any body have any experience with this sort of problem?
Hi
Thanks for your post
To help you further on this issue please share more details
1. erratic mouse cursor movement is happening in win 7 or ubuntu
2. please share the touchpad driver version & bios version
Cheers!!! -
Problem with Cursors in Photoshop CS4
I am only seeing partial cursors (i.e. semi-circles or truncated brush tips) for cursors when I enlarge the cursor size. This is happening across all tools wherever I enlarge the brush tip. I tried resetting the preferences and updating the video drivers with no luck. I am running on Windows XP Professional on a Dell desktop using a Dell monitor that has an nVidia GEForce 8600 GTS video driver running version 6.14.11.5851. I had updated the driver to the latest version but the PC became unstable, causing a system dump and "blue screen of death", so I rolled back to this version. I also use a Wacom tablet with the setup. It had been working fine and I am not aware of any changes to the system that would have caused this. I have an open ticket with Adobe for about two weeks but so far the problem has not been resolved. Does anyone have any suggestions?
Have you updated Photoshop to vession 11.0.1?
Have you tried turning off OpenGL in preferences?
I don't see your card on this list either:
List of tested graphics display cards for Photoshop CS4
http://kb2.adobe.com/cps/405/kb405711.html -
Why does my cursor continually snap to a screen corner every ten seconds or so?
My cursor is unstable. Every ten seconds or so it will snap to one of the corners of my screen. Could it be a screen refresh? But hasn't happened while making this request. However does have problem with Newspapers, MS games, Java,Google search
Does it happen when
* Firefox is closed, or
* when it is started in [[safe mode]]? -
Songs cut 25 sec before the end - Time cursor issues
Hello !
As all for you, I've just downloaded itunes 7. No special problem until today, where I discovered two anoying (but not terrible) bugs:
1) The time cursor when playing a song is unstable. If I want to listen to a song from 2'22 minutes, i bring the cursor with the mouse at 2'22 to play. But if I clip and drag the cursor, the cursor simply keeps going backwards in time until it reaches the song starting point. I've tried it with the different views... Have you noticed it too?
2) A few of my songs are cut 25 or 30 before the end. If I bring the time cursor over the last 30 seconds of these songs, it directly goes to the next song (or even the song after the next one). This is quite annoying. I've to mention that all my song aren't gapless. I turned the fade option off. But it keeps cutting these 15-20 songs end. Does somebody have an idea about that issue??
Thank you
Regards, JonathanDelete it, click here, and follow the instructions.
(100979) -
Compiz-Fusion unstable (Gnome-ATI)
Hello.
I have an absolutely updated Archlinux but Compiz is very unstable. Some weeks ago it was working smoothly. Then came some Xorg, xf86-video-ati and Compiz updates all of a sudden and compiz started to crash very frequently, logging me out to GDM. Then came some more updates and thing has become better but still is crashing. Facts:
1. Starting Gnome session with Compiz-fusion but without Fusion-icon works for a while. Then, suddenly, X crashes and I get back to GDM.
2. If I start Gnome with Metacity everything works nice, but as soon as I run compiz-fusion with fusion-icon it logs me out.
3. No error messages on Xorg.log.
4. I tried to run Fusion-icon from terminal redirecting the output to a file to see if there is some error message but got no luck... no message at all.
5. I don't know where to look at for the error, neither know how to know if it's a bug and, in that case, if that's related to gnome, compiz, xorg, xf86-video-ati or what...
Any information needed just ask, please. Thanks for everything once again, but it seems that I cannot get this working without problems for two weeks in a row, maybe Arch it's too much for my ignorance...Your wishes are orders... But there is no (EE), just some (WW)
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux pablerkas 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 29 14:25:30 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun May 3 21:59:04 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "My Graphics Card"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(**) Option "DontZap" "False"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 8
(--) PCI:*(0@1:0:0) ATI Technologies Inc Radeon Mobility X1400 rev 0, Mem @ 0xd0000000/268435456, 0xefdf0000/65536, I/O @ 0x0000ee00/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
ATI Mobility RADEON M98, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD Graphics, ATI Radeon Graphics,
ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
ATI Radeon Graphics
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 00000000efdf0000
(II) RADEON(0): MMIO registers at 0x00000000efdf0000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "EnablePageFlip" "on"
(**) RADEON(0): Option "DMAForXv" "on"
(**) RADEON(0): Option "AccelDFS" "on"
(**) RADEON(0): Option "ScalerWidth" "2048"
(**) RADEON(0): Option "RenderAccel" "on"
(**) RADEON(0): Option "AccelMethod" "EXA"
(**) RADEON(0): Option "DRI" "on"
(**) RADEON(0): Option "EXAVSync" "on"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility Radeon X1400" (ChipID = 0x7145)
(WW) RADEON(0): R500 support is under development. Please report any issues to [email protected]
(--) RADEON(0): Linear framebuffer at 0x00000000d0000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1028 SubsystemID: 0x2003
IOBaseAddress: 0xee00
Filename: BR18652D.bin
BIOS Bootup Message:
M54P Dell Key largo A12 DDR2 BU BIOS 432e/396m Channel B
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 432000
(II) RADEON(0): Default Memory Clock: 396000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(**) RADEON(0): Page Flipping disabled on r5xx and newer chips.
(**) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1600
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 110000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 432.000000, mclk: 396.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=64800 max=110000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 71110
HBlank: 160, HOverPlus: 48, HSyncWidth: 32
VBlank: 23, VOverPlus: 2, VSyncWidth: 6
(II) RADEON(0): Skipping TV-Out
(II) RADEON(0): Skipping Component Video
encoder: 0x15
encoder: 0xf
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
(II) RADEON(0): Port1:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_LVTM1
DDC reg: 0x7e30
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
finished output detect: 0
(II) RADEON(0): I2C device "LVDS:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: SEC Model: 0 Serial#: 0
(II) RADEON(0): Year: 2006 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 71.1 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 802 v_sync_end 808 v_blanking: 823 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): DF056154X3
(II) RADEON(0): '@PZ °Ùÿ
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff004ca3000000000000
(II) RADEON(0): 00100103802115780a87f594574f8c27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101c71b00a0502017303020
(II) RADEON(0): 26004bcf100000190000000f00000000
(II) RADEON(0): 00000000002387026400000000fe0044
(II) RADEON(0): 463035360331353458330a20000000fe
(II) RADEON(0): 002740505a81b0d9ff01010a2020009d
finished output detect: 1
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: SEC Model: 0 Serial#: 0
(II) RADEON(0): Year: 2006 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 71.1 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 802 v_sync_end 808 v_blanking: 823 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): DF056154X3
(II) RADEON(0): '@PZ °Ùÿ
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff004ca3000000000000
(II) RADEON(0): 00100103802115780a87f594574f8c27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101c71b00a0502017303020
(II) RADEON(0): 26004bcf100000190000000f00000000
(II) RADEON(0): 00000000002387026400000000fe0044
(II) RADEON(0): 463035360331353458330a20000000fe
(II) RADEON(0): 002740505a81b0d9ff01010a2020009d
(II) RADEON(0): EDID vendor "SEC", prod id 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1280x800
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) RADEON(0): Using EXA acceleration architecture
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit d0000000 0 0
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x08000000
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 131040 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00640000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00644000
(II) RADEON(0): Will use 6400 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 32 kb for PCI GART at offset 0x07ff8000
(II) RADEON(0): Will use 6400 kb for back buffer at offset 0x00648000
(II) RADEON(0): Will use 6400 kb for depth buffer at offset 0x00c88000
(II) RADEON(0): Will use 55808 kb for textures at offset 0x012c8000
(II) RADEON(0): Will use 56000 kb for X Server offscreen at offset 0x04948000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xd0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0xf8712000
(II) RADEON(0): [pci] ring handle = 0xf8712000
(II) RADEON(0): [pci] Ring mapped at 0xaf7f0000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xf8813000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xb808a000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf8814000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xaf5f0000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xf8a14000
(II) RADEON(0): [pci] GART Texture map mapped at 0xad970000
(II) RADEON(0): [drm] register handle = 0x2dfbe000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xd7ffd000 is: 0xd7ffd000
(WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0xffffffc0
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
(II) RADEON(0): Setting EXA maxPitchBytes
(II) RADEON(0): EXA VSync enabled
(II) RADEON(0): num quad-pipes is 1
(II) EXA(0): Offscreen pixmap area of 57344000 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) DownloadFromScreen
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Set up textured video
Output CRT1 disable success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output LCD1 disable success
Mode 1280x800 - 1440 823 10
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
freq: 71110000
best_freq: 71109890
best_feedback_div: 719
best_ref_div: 21
best_post_div: 13
(II) RADEON(0): crtc(0) Clock: mode 71110, PLL 71100
(II) RADEON(0): crtc(0) PLL : refdiv 21, fbdiv 0x2CF(719), pdiv 13
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output digital setup success
Enable CRTC 0 success
Unblank CRTC 0 success
Output LCD1 enable success
Output CRT1 disable success
Blank CRTC 1 success
Disable CRTC 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) RADEON(0): Option "ForceLowPowerMode" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 331 x 207
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "es"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event7"
(II) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.0
(**) Option "Device" "/dev/input/event6"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "3"
(**) Option "TapButton3" "2"
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "es"
exaCopyDirty: Pending damage region empty!
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): EDID vendor "SEC", prod id 0
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (49.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: SEC Model: 0 Serial#: 0
(II) RADEON(0): Year: 2006 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 71.1 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 802 v_sync_end 808 v_blanking: 823 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): DF056154X3
(II) RADEON(0): '@PZ °Ùÿ
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff004ca3000000000000
(II) RADEON(0): 00100103802115780a87f594574f8c27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101c71b00a0502017303020
(II) RADEON(0): 26004bcf100000190000000f00000000
(II) RADEON(0): 00000000002387026400000000fe0044
(II) RADEON(0): 463035360331353458330a20000000fe
(II) RADEON(0): 002740505a81b0d9ff01010a2020009d
(II) RADEON(0): EDID vendor "SEC", prod id 0
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): EDID vendor "SEC", prod id 0
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (49.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: SEC Model: 0 Serial#: 0
(II) RADEON(0): Year: 2006 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 71.1 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 802 v_sync_end 808 v_blanking: 823 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): DF056154X3
(II) RADEON(0): '@PZ °Ùÿ
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff004ca3000000000000
(II) RADEON(0): 00100103802115780a87f594574f8c27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101c71b00a0502017303020
(II) RADEON(0): 26004bcf100000190000000f00000000
(II) RADEON(0): 00000000002387026400000000fe0044
(II) RADEON(0): 463035360331353458330a20000000fe
(II) RADEON(0): 002740505a81b0d9ff01010a2020009d
(II) RADEON(0): EDID vendor "SEC", prod id 0
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): EDID vendor "SEC", prod id 0
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (49.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: SEC Model: 0 Serial#: 0
(II) RADEON(0): Year: 2006 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 71.1 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 802 v_sync_end 808 v_blanking: 823 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): DF056154X3
(II) RADEON(0): '@PZ °Ùÿ
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff004ca3000000000000
(II) RADEON(0): 00100103802115780a87f594574f8c27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101c71b00a0502017303020
(II) RADEON(0): 26004bcf100000190000000f00000000
(II) RADEON(0): 00000000002387026400000000fe0044
(II) RADEON(0): 463035360331353458330a20000000fe
(II) RADEON(0): 002740505a81b0d9ff01010a2020009d
(II) RADEON(0): EDID vendor "SEC", prod id 0
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
Output LCD1 enable success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
Output LCD1 enable success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
Output LCD1 enable success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
Output LCD1 enable success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
Output LCD1 enable success -
Is there a solution to the disappearing cursor problem yet?
Recently upgraded my 12 core to Mountain Lion from Snow Leopard to install Media Composer. The disappearing changing cursor is driving me batty. Also My ProTools installation has become very unstable. It sometimes stops processing for about 30 seconds until it decides to access the hard drive (Not sure if it's my media drive or the system drive, both are inside the case) Any thoughts? I still have my old Snow Leopard partition so I am considering installing MC on that instead to see if that works. I can't believe this problem is still rampant. Pardon my sarcasm but I think a basic mouse function might be something you would appreaciate in a new OS. Silly me.
With all the issues you describe, I would search for something conflicting with Mountain Lion.
Have you booted into Safe Mode and checked to see if it works correctly there? It will take a while to boot, and it will run a bit slow, so just look for the issues you described above. If they don't appear, you've got something installed that is causing the issues. -
Pen tool, Rounded ractangle and Brush cursor.
Hi, Good Day.
There are things that I want to say about using CS4.
1. Pen tool.
In Photoshop 5.0, I found that it is faster to <stroke path> compared to the newer version of PS. In PS 5.0, I never need to exit pen tool mode whenever I wanted to select the brush sizes. The Brush size Selection 'tray' tab is always available even when I’ve exit the brush mode. Thus make the stroke works become faster, simpler and easier.
And this is not happen in CS4. What I see is when every time I want to stroke the paths, to choose the brush size I must exit the pen tool mode ; and when I’m back the pen tool mode again, the brush option tray will gone. This slows me every time when I want to choose brush or when I want to re-correct or to re-stroke in order for looking the right brush size and style; it's really complicates me.
So, can Adobe do something about the Brush Selection tab so it always availed like other tabs, like PS5.0 do? Which like swatches tab, color tab, etc.. So it wouldn’t go off next time when we exit the brush mode; thus saves time.
2. Rounded rectangle.
Problem: I want to modify my rounded rectangle shape by adjusting the all the four rounded edges evenly without ruining the square shape. The problem is the shape is too free, the points are working individually and paths are “flabby”.
Can someone tell me know how to lock the shape?
It’s like what in Microsoft Word do. The rounded rectangle lines can be locked so I can adjust the edges to be rounder and rounder, whether partly or simultaneously.
3. Brush cursor.
I found that the brush cursor seem to be ‘unstable’; which is that the PS will change the Normal brush cursor to the Precise brush cursor when I’m using the Text tool, and I can’t change the cursor back to Normal cursor again after exiting the text tool and I'm also not on the text layer. And sometimes this problem happens even when I’m not using the Text tool; for example when I’m doing some copy and paste job.
The only solution is to close PS and restart my computer. What I should do?
Thanks for your concern.Hi Bion_s,
In the course of playing around in Illustrator to find a solution, I found that if you open your appearance panel (Window > Appearance), select the fly-out menu and deselect New Art has Basic Appearance.
I found that with this option unselected, you can select your stroke width and profile and draw multiple times without it reverting to the default stroke!
Please let me know if this works for you. I'm not sure how this might affect your workflow on other projects, but it did result in the behavior you seemed to want.
Cheers,
Michael -
HP printing software is messing up my mouse cursor???
ever since i installed my HP C309g-m, my mouse cursor has been screwy. It is an open hand when browsing. Someone in another forum suggested pressing control and shift, and now when it is over text, it becomes a crosshair.
I tried disabling all the HP add ons (by suggestion) and this didn't seem to make much of a difference. Can anyone help? It is making IE type extremely slowely and is making it very unstable (have to restart all the time).
thanks!
staceyI tried disabling all the HP add ons (by suggestion) and this didn't seem to make much of a difference
Did you close IE after disabling, and then start IE again? It worked for me, but I still think HP should make a fix for this, since the basic idea of the program is pretty good.
It's not of much use if you have to keep it disabled, and then when you really need it, you have to:
enable Web Printing
close IE
open IE
go to the same web page again
use Web Printing -
I have a mid-2010 Macbook Pro, and recently upgraded to Lion. The cursor has become very unstable and disappears from view in Safari, Numbers, iCalc, etc. Does anyone know what is happening? Is this a Lion glitch?
I notice something,when I am using my wireless keyboard to type something the pointer of my magic mouse disappears ,but the minute I start using back the magic mouse it reappears ,when I am watching full screen videos the pointer diappears but when I finish watching videos and I start back using the magic mouse it reappears ,to me I think it is perfectly normal it does this ,except for one thing ,somethimes the magic mouse pointer would not reappear ,if you check the battery and the bluetooth connection ,the magic mouse would still be connected,what worked for me was when I turn off the magic mouse and put it back on.Another method is if you use command and shift it would reappear.This is an apple issue and it has to do with a bug ,it's not your mac or your mouse or the bluetooth connection or mouse batteries ,apple needs to give a software update to fix this ,I hope they do soon because they are really sticking on this one.
-
PowerBook Airport Card looses network and causes unstable...
The Airport Card on my PowerBook 1.67 is having some sort of strange problem. The wireless network I am using suddenly cuts off and disappears and the signal indicator on the toolbar drops to zero bar.
But this is not the only problem, the desktop will become very unstable -- when I move the mouse, the cursor jumps around (sort of like something is running busy and causing the computer to lag).
When I turn off Airport the problem goes away (unstable stage).
Sometimes I have luck by going under preferences > network > airport to re-sign on to the network I was using, but sometimes it will not come back on (it won't pick up the signal), or the desktop cursor keeps jumping (unstable). And I have the restart the computer then it's back to normal.
Did Apple release any update on Airport Card? ThanksInteresting....
My wife's 15" 1.67 GHz PowerBook just started experiencing the same problem (except for the Desktop issue). She can be using her laptop and her preferred network will suddenly vanish. She is usually less than 30 feet from the router at the time and had strong signal strength prior to losing the network. Meanwhile, other iMacs and iBooks in the house can still see the network and have no loss in signal strength.
This problem started happening less than a week ago. Prior to then, this laptop received excellent wireless reception in our house. No changes have been made in our Linksys router in over a month. No Apple updates have been installed since March 2nd (Security Update 2006-001).
This issue seems to be different from past Airport reception problems discussed on this board regarding a design problem. Up until now, she has experienced fairly good reception with her PowerBook. I agree it is not as good as the reception on our iBook, but it has not been an issue for her.
When did you start noticing your version of this problem?
Mitch
PowerBook 15" 1.67GHz Mac OS X (10.4.5) -
Why has my cursor become very laggy?
Hi,
For some reason my cursor has become very laggy since getting Delayed Write error messages causing my system to screw-up. I finally reinstalled a new Windows on drive D, my old (not working) Windows is in drive C. Now when I scroll pages on the net or in applications it is very slow to respond and is unstable.
This also complies with moving windows. When I move a window it also becomes very jumpy. My system was fine until I got those error messages ages ago. Is there a way I can fix this?
Thanks
Message was edited by: lewisliteMy problems first started when 'Delayed Write Failed' messages just popped up out of the blue.
When this happened my system was completely unresponsive for 10 minutes, I could only move the cursor. I think after a while my system rebooted itself and a got the blue screen checking my disks for errors.
After waiting for that I logged back in to find that my cursor 'jumps' shortly after several seconds of moving it. What I mean is I can move it fine for like 2 seconds but then it pauses very shortly and quickly resumes, 'leaping' to what ever direction I was moving it in, so I lose where I was pointing it to.
A few login's later and the error message popped up again - totally uncalled for. I was only using a software to edit videos when it popped up again. Well, after this I ended up switching my laptop back on to find 'Windows\System32\Config\System is corrupt or removed press 'r' to begin repair on Recovery Console using your Windows CD'.
I get to the screen and press 'r'. I don't know what to type in to fix my installation of Windows (drive C) so I hit exit and chose 'new installation' instead. It asked me to save my new Windows onto drive C or D. Drive C has everything on it, my pics, music, docs and most importanly drivers and programs - mainly the Toshiba stuff I need. I'm afraid if I chose to install on drive C all the stuff mentioned above would be wiped clean. Thank goodness for drive D then, so D it was.
When Windows finally installed on Drive D, I discovered my cursor was the laggy one as before and now a new problem; scrolling pages; and moving windows. It's very slow to scroll and it's so unstable it takes me to the top or bottom of the page when I move the scroll bar in that direction. Moving windows is very jumpy and unstable too.
So there you go, that's my problem. Thanks for reading.
P.S If someone could tell me how to repair Windows on drive C, I would be most grateful.
Message was edited by: lewislite -
Hi all,
the first beta of the 4.11 series has been released.
As usual, you find the packages in the [kde-unstable] repo, which only contains beta/rc releases.
Read install instruction from here.
NOTE: It requires [testing] enabled.
There is a soname bump; this is the list of the packages that you need to rebuild:
libkipi.so.10 -> libkipi.so.11
- digikam
- kipi-plugins
- kphotoalbum
Also, there are:
Two new strigi analyzers: kdenetwork-strigi-analyzers (at the moment for torrent only)
A new thumnailers: kdesdk-thumbnailers (at the moment for po files only)
A new runner: kdeplasma-addons-runner-translator.
kdeplasma-addons-applets-kdeobservatory has been removed from the KDE SC.
Please report any packaging bug to our bug tracker.
KDE bugs go in the upstream bug tracker.
Have a nice update and testing!
See the list of known issues.Before upgrading, I was using 4.10.4 with desktop effects enabled (OpenGL 2/Native). After upgrading, only the mouse cursor was displayed and the whole screen is black. There were ghost-like menu animations if I click on the supposed area of the kickoff launcher or hidden notifications. Had to manually killed startkde in a virtual console and select failsafe mode to successfully load the desktop.
Tested that all OpenGL modes are borked with black screen when QT mode is native. Had to change to XRender/Native.
My card is an AMD Radeon 5700M. Even switching to kwin_gles did not work.
OpenGL vendor string: X.Org
OpenGL renderer string: Gallium 0.4 on AMD REDWOOD
OpenGL version string: OpenGL ES 3.0 Mesa 9.1.3
OpenGL shading language version string: OpenGL ES GLSL ES 3.0
Driver: R600G
GPU class: EVERGREEN
OpenGL version: 3.0
GLSL version: 3.0
Mesa version: 9.1.3
X server version: 1.14.1
Linux kernel version: 3.9.5
Direct rendering: yes
Requires strict binding: no
GLSL shaders: yes
Texture NPOT support: yes
Virtual Machine: no
kwin(12576) KWin::EglOnXBackend::init: Cannot enable v-sync as max. swap interval is 0
QObject::connect: Cannot connect (null)::resetCompositing() to KWin::Compositor::restart()
kwin(12576): Failed to initialize compositing, compositing disabled
kwin(12576): Consult http://techbase.kde.org/Projects/KWin/4.0-release-notes#Setting_up
kwin(12576): Render targets aren't supported!
Maybe you are looking for
-
Iphone calendar is repeating days
When I look at calancar on my iphone 4 (list style), it lists the following: tue may 17 wed may 18 tue may 17---where is this coming from? thur may 19 syncing and updating did not fix this. There are a few other instances where there is an extra tues
-
Hi Folks, I would like to block an invoice for payment, when no GR has been made and we do not want to use GR based IV!!!! I tried to mess around with tolerance DQ, without success. I tried to set the tolerances to 0 but no block is set. Any ideas? T
-
Do i need to reinstall office when we change volume licensing to O365
Hi, We have Office pro plus installed and licensed with open value licensing. Now we have plans to order O365 midsize plan. Do we have to reinstall all desktop offices or could we use that office version what we have installed under volume licensing?
-
How can i put 2 pictures side by side into one picture using adobe photoshop cc
I have seen how to do it in regular photoshop but I don't know if adobe photoshop cc is the same program or not. I am sorry I am very computer illiterate and need help. I have two pictures (before and after) and wanted to combine them into one pict
-
Hi All, Searched threads but not found appropriate reply so raising this new thread. Can you please suggest where we can get change log/Documents for CJR2 transaction code? Or its not avaiable there in SAP? - Swapnil Kharul