Unstable Operating System
Is it me, or is this iOS5 really unstable?
I mean, there are quite a few apps that are now constantly force-closing on my iPad (and iPod as well). Now I can understand that some third party apps experience some instability issues with a new OS. But seriously, why does Safari have to force-close regularly?!? Surely Apple can make sure that at least the basic apps that come with the OS run stable?
This started straight after I upgraded to iOS5. When I was still at iOS4 I never experienced this problem on my iPad or iPod.
I'm getting instability problems since upgrading too. Safari at random and Mail within 12-15 secs of launch. A reset as Suggested extended the time up to 22 secs, still not quite long enough to read an email.
Pity the iOS doesn't give some indication of what is going wrong before sending a message to Apple, like OSX.
Similar Messages
-
Premiere CS5 - Project Monitor playback is jerky after resintall of operating system and CS5
PROBLEM: Premiere CS5 - Project Monitor playback is jerky
This had NOT been an issue prior to reinstalling the operating system and all software. I have read numerous articles on the forums and have tried everything I can find...with no results.
STEPS TAKEN TO RESOLVE THE PROBLEM:
I have scoured the articles here http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=choppy%20video&cat=support&pr oduct=premierepro and others at Cretive Cow
I have installed all updates for CS5 Master Collection, immediately following a fresh install of the operating system and SC5 Master Collection.
I have ensured that sequence settings match resolution and frame rates of footage - the problem persists.
I have tested by importing both standard def AVI files created from tape and high def SONY MP4 files - the problem persists.
I have ensured the latest Video drivers are installed (clean installation selected, so that the Windows default would be removed) - the problem persists.
I have tried the 3D settings in NVIDIA control panel | Program Settings tab... selected Adobe Premiere Pro from the drop down menu | and chaged 'Multi-display/mixed-GPU acceleration from the value of 'Multiple Display performance' to the value of 'single display performance'; although, I ran two monitors before using this latest NVIDIA video driver and I didn't experience this jerky footage issue - the problem persisted after affecting that change; so, I switched it back.
Since I have 96 GB of RAM, I don't use a pagefile. A zero MB page file is the same setting I had prior to rebuilding the C: Regardless of whether I have a pagefile or not, the problem persists.
I have tried creating a fresh user profile, where the user profile is created on the C: drive by default; and, where I left it there on C: to test for the jerky playback in a new PrPR project - the problem persists.
Regarding the C: (system drive) and why I reinstalled everything, it had become unstable and was locking up. I ran DISK ERROR CHECKING with the FIX parameter and the system was still locking up on me. Keep in mind that the System drive is a solid state drive. Anyhow, I had no choice but to dive in and reinstall everything. I wiped the system partition of the SSD using quick format and started installing the operating system. Now, I've read the CLAIM that this cuases performance issues; but, the only place I see issues is in the video monitor playback in PrPr. Everything else - Office applications...printing...browsing the Internet...works just fine, everything is responsive, whereas, I couldn't do ANYTHING with it before.
SYSTEM CONFIGURATION:
The Operating system and all software is installed on C:
All data files and most profile related folders are stored on D:
C:\ (one Intel Solid State Drive - SYSTEM DRIVE) Used Space: 57.5 GB Free Space: 388 GB
D:\ (four Western Digital 2TB drives in an on-board INTEL hardware RAID5 array & hotswapable backplane) used space: 1.28 TB Free space: 4.16TB
Adobe Premiere Pro CS5 VERSION: 5.0.3 (005 (MC: 218798))
Operating System Microsoft Windows 7 Ultimate Version 6.1.7601 Service Pack 1 Build 7601
System Manufacturer Intel Corporation
System Model S5520SC
System Type x64-based PC
Video NVIDIA Quadro FX 4800 driver v.320.78
Display Dell 27" LCD (DisplayPort)
Display Dell 27" LCD (DisplayPort)
Processor Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
Processor Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
Installed Physical Memory (RAM) 96.0 GB
Page File Space 0 bytes
PREMIERE PRO CS5 SETTINGS:
Monitor PLAYBACK RESOLUTION: Full
Monitor PAUSE RESOLUTION: Full
(regardless of this setting, the problem persists)
PREFERENCES:
MEMORY:
Installed RAM: 95.9 GB
RAM reserved for other applications: 10 GB
Optimize rendering for: Performance
(Changing this setting to 'memory' does not resolve the problem)
MEDIA:
Media Cache Files
X - Save Media Cached files next to originals when possible
LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
(User Profile folders were relocated to D:\ from within the properties of each folder's 'LOCATION' tab. This is the same configureation I had prior to rebuilding the C:\drive. Testing under a new profile where it's allowed to stay on teh system drive does NOT resolve the problem.)
Media Cache Database
LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
PROJECT SETTINGS:
Scratch Disks
Path: D:\Users...\My Documents\
General
Video Rendering and Playback: Mercury Playback Engine GPU Acceleration
(Setting Viideo Rendering and Playback to 'Sofware' does not resolve the problem)
If any of y'all have any other suggestions, I'm all ears.
Thank you.I'VE RESOLVED THE PROBLEM!
PREFACE:
OK, I am hoping that through this week-long Operating-System-and-Software-reinatalltion excerise of mine, I have revealed something that everyone -- whom have been cursing Adobe over -- can apply to their systems to resolve this jerky video problem within PremierePro CS5 (and quite possibly other versions, too).
If you've read my post above, you've seen all the steps I've taken to resolve the problem. I've read many posts, some of which have mentioned hardware upgrade / opitmization steps that one may take to enhance performance, and hopefully resolve the problem. I've read where people have taken these steps and have still experienced the problem...and then they curse Adobe. Fer-shame, fer-shame, fer-shame! (nod to Gomer Pyle).
In my case, I knew it wasn't an Adobe issue, as it had worked flawlessly before; and, it wouldn't require a hardware upgrade or reconfigureation, as my system is completely maxed out with two processors, a system drive and a hardware RAID5 array, a CUDA-suported nVIDIA 4800 FX card, and 96 GB of RAM. bla bla bla, puke...whatever. Bottom line is this:
It's not a software issue. It's not and Adobe issue; and Gawd no! It's NOT a PC vs. Mac issue! HA HA. The software had worked swimmingly well prior to the reinstallation / 'lobotomy' I perfomed on the system drive.
SOLUTION FOR ME:
Download and install the updated drivers for the motherboard. Mine is an Intel Workstation Board S5520SC. Intel has an INTEL DRIVER UPDATE UTILITY which automatically scaned my Intel system and identified drivers which needed updating. A very handy, time-saving tool!!! Here's the URL: http://www.intel.com/p/en_US/support/detect?iid=dc_iduu
The scan revealed two Intel drivers needing an update:
Intel Chipset
Wired Networking
and one non-intel driver:
Creative Labs Sound Blaster X-fi
I downloaded and installed these three drivers, rebooted, and tested PremierePro, and was extatic to find this resolved the problem.
If you have a motherboard from another manufacturer, then you may want to navigate over to their wibsite to locate chipset and other updated drivers for your motherboard.
ROOT CAUSE:
While Microsoft Windows 7 Ultimate was able to install certain default drivers during the Operating System installation (keeping in mind that this was done on an Intel Solid State Drive that I formatted using Quick Format) these default chipset drivers apparently weren't current and were ultimately the root cuase of the jerky video playback within PremierePro CS5.
Peace -
The new operating system is completely unstable. Mail does not open in a timely manner ( up to 3 mins) I received constant error messages about " library" files.
I has become completely unusable.
Fortunately, I have three boot drives, and I am currently running 10.7.5.
It is fine. Are other customers having similar problems with the new operating system?
It is reminiscent of the problems with Windows following the update from XPHardware Information:
iMac (24-inch, Early 2009)
iMac - model: iMac9,1
1 2.93 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce GT 120 - VRAM: 256 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 0:19:14
Disk Information:
Hitachi HDT721064SLA360 disk0 : (640.14 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Main Drive (disk0s2) /: 627.66 GB (129.01 GB free)
eDrive (disk0s3) <not mounted>: 12 GB
OPTIARC DVD RW AD-5670S
USB Information:
Apple Inc. Built-in iSight
Apple Inc. Keyboard Hub
Apple Inc. Apple Keyboard
Seagate FreeAgent GoFlex 1 TB
EFI (disk2s1) <not mounted>: 209.7 MB
1TB Back Up Drive (disk2s2) /Volumes/1TB Back Up Drive: 999.21 GB (501.51 GB free)
Recovery HD (disk2s3) <not mounted>: 650 MB
Seagate GoFlex Desk 3 TB
disk1s1 (disk1s1) <not mounted>: 209.7 MB
3TB Back Up Drive (disk1s2) /Volumes/3TB Back Up Drive: 3 TB (2.49 TB free)
Recovery HD (disk1s3) <not mounted>: 650 MB
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.parallels.virtualsound (1.0 22731.929773)
Startup Items:
HP IO: Path: /Library/StartupItems/HP IO
HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
ParallelsTransporter: Path: /Library/StartupItems/ParallelsTransporter
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist 3rd-Party support link
[not loaded] com.adobe.SwitchBoard.plist 3rd-Party support link
[loaded] com.bombich.ccc.plist 3rd-Party support link
[loaded] com.bombich.ccc.scheduledtask.0050F9BA-5BA7-454F-B26A-BC578348E4B9.plist 3rd-Party support link
[loaded] com.micromat.TechToolProDaemon.plist 3rd-Party support link
[invalid] com.oracle.java.Helper-Tool.plist
[loaded] com.parallels.mobile.dispatcher.launchdaemon.plist 3rd-Party support link
[loaded] com.parallels.mobile.kextloader.launchdaemon.plist 3rd-Party support link
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[loaded] com.adobe.CS4ServiceManager.plist 3rd-Party support link
[loaded] com.adobe.CS5ServiceManager.plist 3rd-Party support link
[loaded] com.micromat.TechToolProAgent.plist 3rd-Party support link
[invalid] com.oracle.java.Java-Updater.plist
[loaded] com.parallels.mobile.prl_deskctl_agent.launchagent.plist 3rd-Party support link
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[loaded] com.bombich.ccc-user-agent.plist 3rd-Party support link
[loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
[loaded] com.google.keystone.agent.plist 3rd-Party support link
[loaded] com.parallels.mobile.startgui.launchagent.plist 3rd-Party support link
[loaded] com.zeobit.MacKeeper.Helper.plist 3rd-Party support link
[loaded] ws.agile.1PasswordAgent.plist 3rd-Party support link
User Login Items:
AllBookmarks
Air Video Server
iTunesHelper
Viscosity
EvernoteHelper
AirDisplayStatusItem
Dropbox
Canon IJ Network Scanner Selector2
handyPrintDaemon
1Password
HP Scheduler
Internet Plug-ins:
CoolirisWebKitPlugin: Version: (null) 3rd-Party support link
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
Flash Player: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 9.5.5 3rd-Party support link
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
QuickTime Plugin: Version: 7.7.3
Google Earth Web Plug-in: Version: 5.2 3rd-Party support link
RealPlayer Plugin: Version: (null) 3rd-Party support link
Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
iPhotoPhotocast: Version: 7.0 - SDK 10.8
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
fbplugin_1_0_3: Version: (null) 3rd-Party support link
3rd Party Preference Panes:
Air Display Preferences 3rd-Party support link
Flash Player 3rd-Party support link
handyPrint 3rd-Party support link
LaCie Shortcut Button 3rd-Party support link
MacFUSE 3rd-Party support link
MediaCentral 3rd-Party support link
TechTool Protection 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Applications/iWork '09
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
TurboTax 2011: Version: 2011.r02.019 - SDK 10.4 3rd-Party support link
TechTool Pro 6: Version: 6.0.6 - SDK 10.5 3rd-Party support link
FacebookVideoCalling: Version: 1.2.0.157 - SDK 10.5 3rd-Party support link
/Users/paulbschneider/Library/Application Support/Facebook/video/1.2.0.158/FacebookVideoCalling.app
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Destinations:
3TB Back Up Drive [Local] (Last used)
Total size: 0 B
Total number of backups: (null)
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
2% WindowServer
1% EtreCheck
0% coreservicesd
0% SystemUIServer
0% aosnotifyd
Top Processes by Memory:
201 MB com.apple.IconServicesAgent
139 MB mds_stores
139 MB com.apple.internetaccounts
119 MB com.apple.WebKit.WebContent
111 MB Safari
Virtual Memory Information:
886 MB Free RAM
1.52 GB Active RAM
1.07 GB Inactive RAM
557 MB Wired RAM
1.90 GB Page-ins
0 B Page-outs
Hi MichelPM, I hope you can debug this problem. Alas, I return to ze Lion! Cheers. paul -
Neo2 "Error Loading Operating System" solved
hi, i've been struggling with this frikkin error for a while now and i've finally figured it out, after reading a gazillion posts and not finding an answer i thought i should post mine here for anyone who gets the same problem
my setup: msi k8n neo2 platinum, amd 64 3500, some ram and vid card, 200GB SATA drive
PLUG YOUR SATA DRIVE INTO SATA3or4 if you only have one or two, SATA1and2 are unstable(for ocing) and just dont work for some folks
now you boot from windows xp cd, everything seems to be goin fine, pc reboots and BHAM! error loading operating system... ?!
well don't go and enable RAID in your bios (unless you really want to use RAID) just goto the bios --> integrated peripherals --> IDE function setup
now look for SATA1/SATA2 DMA transfer and SATA3/SATA4 DMA transfer, enable these, or at least the one that you're using
reboot, boot from windows cd, quick format the partition you want to install windows on, do the windows thing and reboot, viola! your windows installation should now be booting
if that doesn't solve your problem then i'm a greased weasel!
ps. another solution (that i used the first time round but annoyed me cos i'm really really obsessive about these things) is to run partition magic and clear the drive of partitions, then make a primary partition and a logical drive within that partition and set it to active, this worked for me
xcept i only use 1 HDD with two partitions, a smaller one that gets formatted all the time and off of which i run windows and a larger one that i keep all my stuff on, the trick was the put the booting partition at the end of the disk and not at the beginning like you usually would do, it's got something to do with the 1024 cylinder boundary but i don't understand that tho...I had the same problem, easy solution, use Nforce 6.37 beta driver pack. and It will work OK! A way to enter the system is:
That is a probelm with SATA drivers, you may also install WIN XP making a disk for SATA driver from the Nforce 6.37 drivers in IDE\WINXP
Press F8,
Wait about 10 Secs.
Enter Normally, It may boot.
Regards
You may connect the SATA drive in either 1 - 2 or 3 - 4 Sata ports It will work OK, do not use DMA transfer it will make the Disk slower -
T61: "Error loading operating system" after reboot with Windows XP SR3
So here is my problem: Occasionally, after reboot I get "Error loading operating system" right after the Lenovo screen (the one where you can press ThinkVantage button). After that the only thing I can do is shut down the computer and fix the windows boot (see bellow…). I'm running Windows XP SR3, clean install.
I've had my T61 for 6 months now and I've had this problem about 8 times so far. Obviously this makes my T61 unstable and is becoming a major problem (I like to shut down the computer before taking it anywhere, and I don't really use Hibernate).
Solving the boot is very easy and takes 3 minutes… But the Win XP CD is needed for the fix and I don't want to carry it around with me everywhere. And anyway this is annoying and makes my T61 crippled…
To fix the problem:
1 Change AHCI -> Compatibility in BIOS.
2 Boot using the Windows XP CD.
3 Enter the Recovery Console (press R).
4 Use "fixboot" to write a new boot sector.
5 Restart ("exit").
6 Change back to AHCI in Bios.
After that the computer works perfect until the next time… Things I have tried so far:
1 Installed latest Bios for T61.
2 Checked firmware for HD (WD Scorpio WD1600BEVS) and it's the latest.
3 Installed all windows updates for Windows XP.
4 Installed all latest drivers for T61 (specifically checked the Intel Matrix Storage Driver and it's the latest).
5 Checked computer for Viruses, malware, etc. with a few scanners. It's clean.
6 Updated some of the programs that I thought might be causing problems: Avira , PerfectDisk 2008, TrueImage Home…
7 Checked HD with WD Diagnostics tools
I am out of ideas. Something is corrupting the boot sector occasionally when I shut down the system. But I can't find why or under what circumstances it happens… The only thing I didn't try was a completely new clean system install, a thing which I REALLY don't want to do. Except for this problem the system is great, very stable and I'm very happy with it.
Any ideas? Thanks in advance.I run the windows version of TestDisk. Is there any specific reason for me to make a Live CD? It seems to work just fine in windows. Anyway, I run all the analysis tests with it. It did NOT find any problems. Is there some specific test I should run?
Some further testing has shown me that the problem happens sometime during using windows and not upon restarting... When it does happen I can no longer use chkdsk - it gives the following error message:
"The type of the filesystem is RAW.
CHKDSK is not available for RAW drives."
Some other things I tried:
- I've pretty much ruled out physical HD problems (I checked the HD with PC Doctor, WD's Data Lifeguard Diagnostic Tool and chkdsk - no problems). And the HD shows no symptoms of failure (no noises or any other problems).
- Ruled out boot-sector Viruses (cheked the computer with 4 different antiviruses - Avira,AVG, Kaspersky and NOD32).
- Manually checked the boot.ini file - no problems.
- I have also found while googling that the problem might have to do with a registry entry concerning HDs bigger then 137gb. I double checked that entry and it's fine.
- Tried both fixmbr and fixboot, alone and together - windows boots, but the problem comes back again after a few hours/days...
Things I'm trying now:
- Reinstalled the Intel Matrix Storage Drivers (before I just checked that they are the latest).
- Disabled the Active Protection System (I am shooting in the dark...).
I am getting pretty desperate here. -
How to: execute operating system commands from PL/SQL
System: IBM pSeries AIX
Oracle: 11g Enterprise
Is there a quick way to execute operating system commands from PL/SQL?
Without creating a JAVA class....
I need to execute a Loader script.
I want to do this from within PL/SQL.
I need to to do 4 things.
Three require SQL scripts.
The fourth is SQL*Loader.
The usual way is with a UNIX script calling 3 SQL scripts and one Loader control file.
Is there way to do all this from within ONE PL/SQL SCRIPT ??
Just let me know.Is there a quick way to execute operating system commands from PL/SQL?
NO
Without creating a JAVA class....
I need to execute a Loader script.
I want to do this from within PL/SQL.
WHY ON EARTH, such action will create a new connection and become a resource hog?
I need to to do 4 things.
Three require SQL scripts.
The fourth is SQL*Loader.
The usual way is with a UNIX script calling 3 SQL scripts and one Loader control file.
Which is perfect for the purpose.
Is there way to do all this from within ONE PL/SQL SCRIPT ??
Just let me know.
NO, there is NOT. Nor should there be. Why create unstable ineffcient Mickey Mouse systems, glued together by hacking?
Sybrand Bakker
Senior Oracle DBA -
USA.
Good day! I like you a fan of the forum users of APPLE. I live in the Russian Federation. Began his acquaintance with this company back in 2010 with the Ipad 2 device was still on ios 5. In January 2014 I made a gift and bought the iPhone 5s on OC IOS 7. I bought it at the official Russian official price that more accurately put Apple in 1100 $. In our country, it is a lot of money. With the money I could live for 3 months. In fact, I became the owner of a top (at the time) from a favorite device of Apple. My iPhone 5s worked perfectly on ios 7. sometimes met friezes light animation, and non-critical bugs, but who is without sin? Favorite company I was willing to forgive it because I see that she is trying to be better and not standing still. Looking WWDC presentation which provided us with iOS 8 you assured me that everything was better, faster, more functional. I was determined that update my iPhone 5s to iOS 8.0 ... APPLE releases new OC iOS 8 ... And I live! Behind the beautiful words that we said at the presentation of the great features of the new iOS hiding "something." And that "something" turned my phone in ... "pumpkin"! Yes! In that same stupid pumpkin! And now I will explain why I think it's pumpkin, not rose.
Sea bugs ... and they are awful and terrible as it does not give me the full extent of my work enjoy iPhone 5s!
Start from the beginning:
1 Streaming through technology "Air play".
"Air play" ceased to function properly! He was often disconnected from Apple tv and Apple airport express last generation. Apple tv 2g can not receive the signal from my iPhone 5s! And when it's all the same he gets a video playback does not last long, it just breaks and does not connect again! Helps to restart Apple TV and a hard reset by holding the button "HOME" button and "POWER". On the "Apple TV" is worth the latest firmware as these problems are manifested in the previous firmware of the device.
2 Built-in browser "Safari".
Tab in the "Safari" became constantly updated when I switch to another application or the other tabs! Apparent lack of memory (on iOS 7.1.2 with it all much better. At least when switching tabs does not re-update the previous tab).
Playing online video on non-optimized mobile site in the browser "Safari" really does not work! It is turned on and loaded almost to infinity! Sometimes just a black screen with an icon "Play" to be pressed at least 100 times, and the result is 0!
Scroll pages in the browser have become terribly sharp and smooth! on iOS 7.1.2 everything is fine, nice and smooth and no such bugs! Total confusion and thoughtfulness browser "Safari".
If the video still runs (for me equates to a miracle) then when rewinding the film is generally something strange ... Fast chooses how minutes and seconds I watch a movie (usually just starts playing from the beginning), or does not respond at all ... This is the same magic Apple? Unlikely.
3 multitasking menu (double-press "HOME").
Call multitasking (by double-clicking "HOME") began working with a delay, with a lag, c jerky animation, and sometimes even without it.
Control Center (which is called swipe upwards) was to slow down! Yes! That retard! Animation jumping shutter control center began play with tangible frame loss! If iPhone 5s under the control of OS iOS 7.1.2 everything happened smoothly, beautifully and dynamically in the iOS 8.0 it looks like on the iPhone 5 running iOS 7.C than strongly connected is not clear! Graphic differences from iOS iOS 7 8 almost equal to 0, and the speed of decline in almost 50%! How ?! Why ?! Why does my iPhone 5s become the iPhone 5 ?! This is an artificial slowing my device to increase the demand on the iPhone 6 or still glitch iOS 8.0 for iPhone 5s? Honey the company Apple, I really hope for the 2nd. Especially this shortfall fps animation curtain markedly if you open multitasking (acquired by double button "HOME") and call the control center and you'll see that the animation is playing choppy and not smooth! On IOS 7.1.2 this is not! Control center jumps smoothly and beautifully! On iOS 8.0 it happens all the time! Even if you turn off your favorite contacts and recent calls (I'm ashamed to say they thought) that appeared in iOS 8 (they are above programs on the multi-tasking) not solve the problem. As well, if you call the control center on the lock screen, then drop FPS will be very noticeable even to the untrained viewer (especially if you take two iPhone 5s one running iOS 7 and 8, the second on iOS and compare them on the forehead). If the Control Center click airdrop (air play) the animation of its appearance again played in spurts and not terribly nice and smoothly (especially noticeable on the lock screen and comparison of the forehead)! In a telephone call has been going absolutely shameless FPS drop a call center management and other activities!
And yes, for me it is a critical issue! I do not want the transition to iOS 9 my iPhone 5s turned to the iPhone 4 on iOS 7 (vid you all remember this terrible story?)! I want my iPhone 5s worked as smoothly as on iOS 7.1.2! Nor any justification for this inhibition iskuvsstvennoy I can not see! 8 beautiful iOS did not! graphic elements do not appear! So goes the Apple is doing this on purpose ?! We go down the list!
4 minor bugs that just break my brain and kill all the beauty of the use of "the best mobile operating system in the world"!
4.1. When a call comes in when you clicked the icon making a call the phone for about 2-3 seconds, vibrates and plays a melody. On iOS 7.1.2 ringtone and vibration stops as soon as you have accepted the challenge and in your ear does not play your ringtone by "imagine Dragons", cheeks beats you invented vibration in the style of "Tick-tonic."
4.2. When you look at the page on the Internet-phone terribly terribly strongly heated! A pair of piping hot! On iOS 7.1.2 is no such problem! Telephone hot, but not as much as on iOS 8.0!
4.3. Folder on the home screen opens with a delay of 0.5-1 second is the impact on the overall impression of iOS 8.0.
4.4. When you create a set (12 pieces) icons in one folder if dramatically open the folder and make swipe to the left then the following icons in this folder does not have time to boot up and are delayed by 1 second.
4.5. When you create a folder with 1-9 icons do if the above action fails then the animation (the same bug exists in iOS 7.1.2). It is very not nice aesthetically.
4.6. Scroll to your "Settings" felt terribly antsy. Although it is not only in the application "Settings" but also to the entire system and applications in general ...
4.7. Scroll to the Home screen has become less responsive to user actions all movements inogoda occur with jerky animation and some delay to the user.
4.8. Quite often, and without rational reason for going off the sensor device. That is, the screen does not respond to any user action! Helps pressing "HOME" or hard reset by holding the button "HOME" and "POWER".
4.9. Most people on the iPhone 5s lost communication with a mobile operator. Just go on and lost and because of this I have missed calls from their loved ones and friends (would cost you to be glad that I have not missed calls on business issues).
5.0. Many owners of iPhone 5s and iPhone 5 uhudzhenie complain about battery life. I honestly did not notice it, but we will not drop this off.
Outcome.
And now gets quite an interesting question, why? Why does my iPhone 5s began to slow? Why in the absence of graphical improvements are absolutely the same actions were reproduced with the loss of fps, slow down, lag, hover, fly? Why, if put next iPhone 5s on iOS 7.1.2 and exactly the same iPhone 5s on iOS 8.0 and pull the control panel to call multitasking bar, carry out all other actions I have described it on your device running iOS 7.1.2 it will work without any delays, lags, the deterioration in the responsiveness of the interface, reducing fps, and no departures from simple applications written directly by Apple? I see absolutely no any obstacles in the way to make the iPhone 5s to the operating system iOS 8.0 worked with the same smoothness, with the same responsiveness and speed as the iPhone 5s running iOS 7.1.2! I do not see what these restrictions are not!
There are many different bugs that I do not even remember now (as I write this text on emotions (positive) as able to roll back your iPhone 5s back to iOS 7.1.2, and he seemed to come alive with new life) and so far I have esteemed company APPLE does not eliminate these improvements do not, I will not go back to iOS 8.0! if the dispensation of these bugs, flaws, intentional degradation of the (almost identical in performance in comparison with the iPhone 6) IPhone 5s will not happen and the company APPLE will continue to apply to consumers of their products as a beta tester I will be forced to organize a petition and file a class action lawsuit in court not only in their own country (which is for the Russian Federation) but also in the United States and in other countries where people are just like me trying to deceive, mislead and force companies to buy new devices APPLE without having expressed any any more substantial explanation except as <iPhone 6 was 25% more powerful on with alignment with the iPhone 5s>!
P.s.
I hope Apple will still listen to their users and I also hope that it (Apple) still change his mind and will try in the near future to give users not-so-old devices (iPhone 5s, iPad Air, iPad mini Retina) and enjoy on all the new features of iOS 8 no lag, locked up, overheating, inhibited animation. Thank you for being there!
Ru.
Всем доброго времени суток! Я как и вы форумчане являюсь фанатом компании APPLE. Проживаю я в Российской Федерации. Начал свое знакомство с этой компанией в далеком 2010 году с устройства Ipad 2 тогда еще на ios 5. В январе 2014 я сделал себе подарок и купил iPhone 5s на OC IOS 7. Купил я его официально по официальной Российской цене которую выставила Apple точнее за 1100$. В нашей стране это очень большие деньги. На эти деньги я бы мог жить 3 месяца. По сути я стал обладателем топового (на тот момент) устройства от любимой компании Apple. Мой iPhone 5s прекрасно работал на ios 7. Иногда встречались легкие фризы анимации, и не критичные баги, но кто без греха? Любимой компании я был готов это простить так как вижу, что она старается быть лучше и не стоит на месте. Посмотрев презентацию WWDC на которой представили iOS 8 нас с вами уверяли, что все стало лучше, быстрее, функциональнее. Я твердо решил, что обновлю свой iPhone 5s до iOS 8.0... APPLE выпускает новую OC iOS 8... И я обновился! За красивыми словами, что нам говорили на презентации, за великолепными функциональными возможностями новой iOS скрывалось "нечто". И это "нечто" превратило мой телефон в... "тыкву"! Да! В ту самую тупую тыкву! И сейчас я объясню почему я думаю, что это тыква, а не роза.
Море багов... причем они ужасны и страшны так как не дают мне в полноценной мере насладится работой моего iPhone 5s!
Начнем по порядку:
1. Потоковая передача данных посредством технологии "Air play".
"Air play" перестал нормально работать! Он стал часто отсоединяться от Apple tv и Apple airport express последнего поколения. Apple tv 2g не может принять сигнал от моего iPhone 5s! А когда все же это у него получается то воспроизведение видео длится не долго оно просто обрывается и не дает подключиться повторно! Помогает перезагрузка Apple TV и жесткий сброс посредством удержания кнопки "HOME" и кнопки "POWER". На "Apple TV" стоит последняя прошивка так же эти проблемы проявлялись и на предыдущей прошивке устройства.
2. Встроенный в систему Браузер "Safari".
Вкладки в "Safari" стали постоянно обновляться когда я переключаюсь на другое приложение или на другие вкладки! Явная нехватка оперативной памяти (на iOS 7.1.2 с этим все гораздо лучше. по крайней мере при переключение вкладок не происходило повторное обновление предыдущей вкладки).
Воспроизведение онлайн видео на не оптимизированном для мобильных устройств сайте в браузере "Safari" толком не работает! Оно включается и загружается чуть ли не до бесконечности! Порой просто черный экран с иконкой "Play" на которою нажимай хоть 100 раз, а результата 0!
Пролистывание страниц в браузере стали до ужаса резкими и не плавными! на iOS 7.1.2 все прекрасно, плавно и красиво и таких багов нет! Общая заторможенность и задумчивость браузера "Safari".
Если видео все же запускается (что для меня приравнивается к чуду) то при перемотке фильма происходит вообще что-то непонятное... Перемотка сама выбирает с какой минуты и секунды мне смотреть фильм (чаще просто начинает воспроизводить все с самого начала) либо не реагирует вовсе... Эта та самая магия Apple? Непохоже.
3. Меню многозадачности (двойное нажатие кнопки "HOME").
Вызов многозадачности (посредством двойного нажатия кнопки "HOME") стал работать с задержкой, с лагом, c дерганой анимацией, а порой и вовсе без нее.
Центр управления (который вызывается свайпом снизу вверх) стал тормозить! Да! Именно тормозить! Анимация выпрыгивания шторки центра управления стала воспроизводиться с ощутимой потерей кадров! Если на iPhone 5s под управление OS iOS 7.1.2 все происходило плавно, красиво и динамично то в iOS 8.0 все выглядит как на iPhone 5 под управлением iOS 7.с чем это связанно решительно не понятно! Графические отличия iOS 7 от iOS 8 практически равны 0, а скорость работы сниженна практически на 50%! Как?! Почему?! Почему мой iPhone 5s стал iPhone 5?! Это искусственное замедление моего устройства для повышения спроса на iPhone 6 или все же недоработка iOS 8.0 для iPhone 5s? Дорогая компания Apple, я очень надеюсь на 2-е. Особенно эту нехватку fps в анимации шторки заметно если открыть многозадачность (посредством двойного нажития кнопки "HOME") и вызвать центр управления и вы увидите что анимация проигрывается рывками и не плавно! На IOS 7.1.2 такого нет! Центр управления выпрыгивает плавно и красиво! На iOS 8.0 это происходит постоянно! Даже если отключить избранные контакты и недавние вызовы (я грешным делом подумал на них) которые появились в iOS 8 (они находятся выше программ на панели многозадачности) проблему не решить. Так же, если вызвать центр управления на экране блокировки то падение FPS будет очень заметно даже для неподготовленного зрителя (особенно если взять два iPhone 5s один под управление iOS 7 и второй на iOS 8 и сравнить их в лоб). Если в центре управления нажать кнопку airdrop (air play) то анимация ее появления опять таки проиграется рывками и ужасно не красиво и не плавно (особенно заметно на экране блокировки и при сравнение в лоб)! При телефонном вызове происходит уже совсем уж бессовестное падение FPS при вызове центра управления и при других действиях!
И да, для меня это критичная проблема! Я не хочу чтобы при переходе на iOS 9 мой iPhone 5s превратился в iPhone 4 на iOS 7 (Вы видь все помните эту страшную историю?)! Я хочу чтобы мой iPhone 5s работал так же плавно как и на iOS 7.1.2! Ни каких оправданий для этой искувсственной заторможенности я не вижу! iOS 8 красивей не стала! графических элементов больше не появилось! Так выходит компания Apple делает это специально?! Идем дальше по списку!
4. мелкие баги которые просто разрывают мой мозг и убивают всю красоту использования "Самой лучшей мобильной операционной системы в мире"!
4.1. При входящем вызове когда вы нажали иконку принятия вызова телефон еще около 2-3 секунд вибрирует и проигрывает мелодию. На iOS 7.1.2 мелодия и вибрация останавливается как только вы приняли вызов и вам в ухо не играет ваш рингтон в исполнении "imagine Dragons", по щекам не бьет придуманная вами вибрации в стиле "Тик-тоник".
4.2. Когда смотришь страницы в интернете телефон ужасно-ужасно сильно греется! Парой обжигающе сильно! На iOS 7.1.2 такой проблемы нет! Телефон горячий, но не так сильно как на iOS 8.0!
4.3. Папки на домашнем экране открываются с задержкой в 0.5-1 секунду это сказывается на общем впечатлении от iOS 8.0.
4.4. При создании множества (12 штук) иконок в одной папке если резко открыть папку и сделать свайп влево то следующие иконки в этой папке не успевают загрузиться и отображаются с задержкой в 1 секунду.
4.5. При создании папки с 1-9 иконками если проделать описанное выше действие то произойдет сбой анимации (этот же баг есть и в iOS 7.1.2). Это крайне не приятно эстетически.
4.6. Пролистывание в приложении "Настройки" стало ужасно дерганым. Хотя не только в приложении "Настройки" но и по всей системе и в приложениях в целом...
4.7. Пролистывание на Домашнем экране стало менее отзывчивое на действия пользователя все движения иногода происходят с дерганой анимацией и какой-то задержкой на действия пользователя.
4.8. Довольно часто и без объяснимой причины происходит отключения сенсора устройства. То есть экран не реагирует ни на какие действия пользователя! Помогает нажатие кнопки "HOME" либо жесткий сброс посредством удержания кнопки "HOME" и "POWER".
4.9. Большинства людей на iPhone 5s пропадает связь с сотовым оператором. Просто берет и теряется и из за этого я уже пропускал звонки от своих близких и друзей (стоило бы вам порадоваться, что я не пропустил звонки по рабочим вопросам).
5.0. Многие обладатели iPhone 5s и iPhone 5 жалуются на ухуджение работы аккумулятора. Я честно говоря этого не заметил, но не будем сбрасывать этого со счетов.
Итог.
А теперь встает довольно интересный вопрос, почему? Почему мой iPhone 5s стал тормозить? Почему при отсутствии графических улучшений абсолютно одни и те же действия стали воспроизводится с потерей fps, тормозить, лагать, зависать, вылетать? Почему если положить рядом iPhone 5s на iOS 7.1.2 и точно такой же iPhone 5s на iOS 8.0 и вытянуть панель управление, вызвать панель многозадачности, провести все остальные действия описанные мною то на устройстве под управлением iOS 7.1.2 все будет работать без каких либо задержек, лагов, ухудшение в отзывчивости интерфейса, уменьшении fps и просто без вылетов из приложений написанных непосредственно компанией Apple? Я не вижу абсолютно ни каких преград в том чтобы сделать так чтобы iPhone 5s под управлением операционной системой iOS 8.0 работал с той же плавностью, с той же отзывчивостью и скоростью, что и iPhone 5s под управлением iOS 7.1.2! Не вижу от того, что этих ограничений нет!
Есть еще множество различных багов о которых я сейчас даже не вспомню (так как этот текст я пишу на эмоциях (положительных) так как смог откатить свой iPhone 5s обратно на iOS 7.1.2 и он как будто ожил новой жизнью) и пока глубокоуважаемая мною компания APPLE не устранит эти не доработки я не буду возвращаться обратно на iOS 8.0! если устроения этих багов, недоработок, умышленного ухудшения работы (практически одинакового по производительности в сравнении с iPhone 6) IPhone 5s не произойдет и компания APPLE будет и дальше относиться к потребителям своей продукции как к бета тестерам я буду вынужден организовать петицию и подать коллективный иск в суд не только в своей стране (коей является Российская Федерация) но и в США и в других странах где людей так же как и меня пытаются обмануть, ввести в заблуждение и заставить покупать новые устройства компании APPLE не дав на то ни каких более существенных объяснений кроме как < iPhone 6 стал на 25% мощнее по с равнению с iPhone 5s>!
P.s.
Я надеюсь компания Apple все еще прислушивается к своим пользователям и я так же надеюсь, что она (Apple) все же одумается и постарается в ближайшее время дать пользователям не таких уж и старых устройств (iPhone 5s, iPad Air, iPad mini Retina) наслаждаться и дальше всеми новыми возможностями операционной системы iOS 8 без лагов, подвисаний, перегревов, заторможенной анимации. Спасибо, что вы есть!Agreed! This bug with the ringtone delay (№4.1) is really annoying
-
I'm a retired IT professional desiring to assist a friend who owns a small business who recently experienced very malicious attacks on her computers from unknown parties operating anonymously on the Internet. Because
of her lack of preparation for such events, her future ability to continue to conduct her business was seriously threatened. The incident revealed, to my friend, the need to be prepared to deal with spontaneously occurring problems that create suspicious conditions
that arise with modern computer software before they can be analyzed in a sufficiently comprehensive manner to have an opinion regarding the appropriate course of action for obtaining a permanent remedy. In that, the ability to quickly react on the basis of
only suspicion is the goal.
I want to recommend an approach that involves maintaining an offline image of an operational system that is capable of running any of her computers. This image needs to include all of the software required to run
her business. In that, it is not limited to the operating system. This single image could then be used to restore any computer to a known reliable state should the need arise. This technique will also insure that each computer has sufficiently similar capability
to allow them to substitute for each other. Insofar as image restoration is itself an operation susceptible to causing unacceptable business delay I'm also recommending that each of the identical computers (i.e., from a hardware perspective) operate in a multi-boot
environment where a virtually offline backup can be instantiated via a simple reboot (i.e., an operation that all users of the Windows operating systems turn to when strange behavior is first observed). My intention is to limit the cloned system (i.e., partition
or C: drive) to the operational software. The business data along with storage for temporary data will be isolated on other partitions (i.e, mounted with other drive letters) accessible by each instance of the software eligible for multi-boot operation.
This kind of operation is something that I know how to setup on older versions of the Windows operating system. However, Microsoft has now dropped support for all of those operating systems and my much more limited
experience with the currently supported operating systems reveals that changes to the boot process will necessitate making changes to the specific preparations needed to build such an environment.
Before recommending that my friend replace all of her computers with new ones, that includes paying for new operating system (i.e., Windows) licenses, I need some assurance that the new operating systems are as
good as the old ones in this respect. These need to be relatively inexpensive desktop computers and we're only talking about a few of them. Let's say fewer than half a dozen. My friend is a sole proprietor and even though her business has become completely
dependent on what was once called personal computers she must operate on a fairly tight budget. This especially includes the budget for technology.
The articles I've been able to find on the Microsoft support websites seem to treat multi-boot as a situation where someone is running different versions of possibly difference operating systems whereas my need
to produce a single image that will both run on multiple computers as well as multiple partitions on the same computer. I'd appreciate finding some technical advice that applies to building such a system using a supported version of Windows.I tried the image creation/restoration described by Jared. I don't think it makes much sense to rely on an operational system to do such a restoration therefore I opted for method 3 which involves using a "System Repair Disk". My first
reaction is what a crude tool. The image creation process had no trouble putting the image on a simple network share. However, it appeared as though the restoration couldn't even connect with the device. I then copied the files to a USB drive.
In this case the repair disk said it couldn't find the files even though they were there. It offered no mechanism to even look and see what was there. It appears as though it will only find the image if it is located in a folder by the certain
name used on creation and it is in root directory. Not very handy.
As ugly as all that was when we finally come to the point of making the restore it looks like the only option is to restore the entire disk, which in my case would mean also restoring both the windows partition and the recovery partition. This just
isn't what I want to do. It is also something I wouldn't even consider doing unless it was the only possible way to recover from a failed hard drive.
In summary, unless I've completely failed to notice how it works that just isn't going to work.
I hope there is something better than this. What about WinPE and ImageX?
Absent anything useful from Microsoft it will be necessary to try using other software. Time to try Acronis! I guess. -
How do i install a free osx or operating system on my macbook pro 2008?
Hey so the go is i have a macbook pro 2008 i love it too bits but for some reason my screen flickers all the time but ill just have to deal with it. Secondly i cant install any operating systems because i dont have a mac to download osx from or mountain lion. And when i go to download it directly from my macbook pro it says i need to buy it :/ or i dont have the licence i cant remember but i just want it working whoever can help me i would much appreciate!! thankyou for reading this and also ps my screen when im on the net on it in the safari osx menu it intermittly spazzes and all the url bars keep clicking etc i dont know what the problem is but i would appreciate some advice or help! it is a good machiene quiet no damage looked after just got it given to me from a family member but i have had no luck so far
Jamesandmacbooks,
if by “free” you mean “gratis” (as opposed to, say, “open source”), then there’s only one version of OS X to date that’s gratis, namely Mavericks. You can only download Mavericks if you currently have Mac OS X 10.6.6 or later installed. If you’re still running Leopard (Mac OS X 10.5.something) on your 2008 MacBook Pro, then you’ll need to first purchase the white retail Snow Leopard DVD, install it on your MacBook Pro, and run Software Update to get it to 10.6.8, after which you can download Mavericks gratis from the Mac App Store and install that. Be sure that your MacBook Pro meets all of Mavericks’ system requirements before trying to install it. If you currently run any PowerPC apps, note that they won’t be supported in any version of OS X after Snow Leopard. -
After bios update, will not boot, says install an operating system
I have a amd hp 2000 notebook. i replaced the hard drive with an ss drive, windows 7. been working fine until the bios update, I bleieve, which lost the boot up parameters. how do I get it to boot. hard drive works well in another system so not that. getting the usual message, boot dvice not found, install an operating system, F2 diagnostics all pass. Hard disk (3F0) message
should one revert to earlier bios, usually not recommended. bios version 45 it says, so not sure the latest.jwess wrote:
I have a amd hp 2000 notebook. i replaced the hard drive with an ss drive, windows 7. been working fine until the bios update, I bleieve, which lost the boot up parameters. how do I get it to boot. hard drive works well in another system so not that. getting the usual message, boot dvice not found, install an operating system, F2 diagnostics all pass. Hard disk (3F0) message
should one revert to earlier bios, usually not recommended. bios version 45 it says, so not sure the latest. -
I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????
Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X. -
I have an iMac and use OS 10.4.11 & Firefox 3.6.19. Firefox prompted me to download an update (to 7.0.1). I looked up the system requirements on your website, and it stated the update is compatible with OS 10.4.11. But after I downloaded and installed the update, it failed to work on grounds of incompatibility. Hence 2 questions: (1) Why did Firefox prompt me to download an incompatible update? (2) Why did your website claim the update is compatible with my operating system when it is not?
Sorry, it's because Firefox 4+ are only compiled for the Intel processors.
There is a separate project for PPC Macs called Ten Four Fox. You might give it a spin when you're tired of 3.6.
http://www.floodgap.com/software/tenfourfox/ -
My operating system windows XP not working with photoshop cloud, why not?
I need to add 2 more licences for photoshop cloud and I'm being told my operating system windows XP does not work with Photoshop cloud. We already have 2 pcs using it in our office so why not?
Please help
RoyDo you have the latest version of iTunes? If not, get it at:
http://www.apple.com/itunes -
Adobe Creative Cloud does not support APPLE latest IOS operating system, but does allow Windows 8.1 to be accepted. This seems a shame to me, as
Apple IOS is the leader in graphics, photography. The advertising states it is usable under both APPLE IOS and Microsoft 8.1 windows operating systems. Adobe Support Chat Sooraj tells me on 02/19/2015 that i must buy two computers to have it operate on both operating systems. Adobe will not support apple's Boot CAMP allowing both operating systems.
i love the apple product and love the ADOBE Photoshop CC, but it simply does now work with an apple keyboard and a WiN operating system. .[email protected] Adobe Creative CloudIn Thehatters defence, this was initially posted in the MacbookPro forum and then moved to Boot Camp,
If you have any joy solving your trackpad device driver issue, feel free to post here (there might be a similar fix for my wireless adapter device)
Thanks -
How to install SAP NETWEAVER XI 3.0 on INIX operating system
Hi,
we are migrating from AIX to HP SUPERDOME on UNIX operating system.
Can anyone give details about how to do it i.e about the installation and neccessary steps that need to take in the above problemHello Please refer these links,
installation guide:
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
configuration guide:
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
Maybe you are looking for
-
I cannot open an Pages document that a friend created on his Mac. Somehow it got corrupted. He made the document from a template I made for him. I called Applecare and they couldn't help me. We were able to open any other Pages documents I tried
-
Need to delete / clear PO value for a deleted shopping cart item.
Hi friends Please help me on below mentioned issue. I have a shopping cart with one deleted item, That deleted item shows a PO number under table BP_PDBEI field BE_OBJECT_ID in production server. User want that PO number to be delete or clear from th
-
JMS Adapter - data conversion xml- structured data has extra characters
Further to [Using MQ / JMS adapter with legacy system to talk to SAP;, I am using the Module tab on my receiver JMS Adapter to convert the xml payload to a structured format. It converts to the mainframe ebcdic code set. I am on PI 7.11, and the MQ
-
XP OS, have NoScript installed, disabled, Java console still will not load from FFx.
-
hopefully some one can help to know why this message keeps poping up and stop my sound. this accessory is not optimised for this phone