Unstable system with two 20" monitors

I recently picked up a new 20" cinema display dor my Dual 1.8 G5 with 1.5 Gigs RAM and the stock GeForce FX 5200, and now the computer keeps crashing. I used to run a clear-type 20" and a little 15" CRT monitor, now I'm using the two 20s. What kind of upgrades do I need to make this work?
G5 Mac OS X (10.3.9)

Hi,
The 5200 is pretty marginal for your requirements. Your best bet is to upgrade your video card. I would suggest the most powerful new video card available for your G5, ATI 9800 256MB Mac Edition. It has one DVI and one VGA output, if that suits you.
Regards,
Dave

Similar Messages

Connect one Business system with two Integration Server

Hello,
Can we able to connect one Business System with two Integration Server?
I have one Business system (ECC 6.0 with the client 900) and it is already connected with PI 7.0 system.Can I able to connect the same sytem (with same client) with PI7.1?
I want to do the HTTP Connection for ABAP Proxy for this two XI system with one business Sytem ?
Is this possible ?Is there any work around solution there?
Thanks.

Hello ,
This document describes about connecting with Two PI7.1 system using Application Server 7.1 and Application Server 7.0 SP14 .
I want to connect same ECC system via abap proxy with two different PI system .One is PI7.0 and another one is PI7.1 system.
Is this possible if i use Application Server 7.1 or Application Server 7.0 SP14 ?
Thanks.
Lakshmi
Edited by: Muthulakshmi Pandi on Apr 16, 2009 11:48 PM
Edited by: Muthulakshmi Pandi on Apr 17, 2009 12:21 AM

Macbook Pro 2013 with two external monitors (Docking station)?

Hi there,
I am currently using an iMac 27 2013, but have come to the conclusion that a Macbook Pro 13" would suit my needs better as I now often need a mobile solution.
However, when at home, I would like to hook it up to my two external Dell (Mini DP) monitors in order to have more workspace.
For that, I am looking for some kind of Docking Station because it would be awesome just to have to plug in one cable and not all the USB cables for my other stuff, like midi keyboard etc.
Is there something I can purchase that offers me all I need or would you rather stay with the iMac?
Thank you!

Maybe someone with a 2010 model will jump in and correct me, but as you only have a single Mini DsplayPort adapter, I don't think that it's possible to have two external models on a 2010 model. You can only do it on 2011+ via Thunderbolt using Thunderbolt Displays.
You might want to ask your question in the Apple Cinema Display forum, though. I'm just not aware that it can be done.
Clinton

Airport Express systems with two relay stations

I need to use four Airport Expresses to cover my house from bottom to top. The system design is such that the main base station connected to the broadband router is in the basement, then there are two relay stations to connect to the final remote base station located at the top floor.
The Apple manual describe the use of one one relay station between the main base station and a remote base station, the case of two relay stations is not covered. The question therefore is what settings the relay stations should have in such a configuration.
Windows XP
Windows XP
Windows XP

Welcome to the discussions.
Here is what Apple says.
The base station that connects to your Internet service provider is the main base station. A remote base station connects wirelessly to the main station and extends (or "rebroadcasts") the wireless network to clients that are not in range of the main. A relay base station is like a remote, but it has the additional function of extending the wireless network to a remote which isn't within range of the main. There can be only one relay between a remote and a main.
Don

Calling ABAP Web Service on the system with two application servers

Hello all,
I try to figure out, how to setup a web service in the TC WSCONFIG in the multi application server environment.
Basically the requirement is that when WSClient calls my WS, it should not care about accessibility of one or another application server. In other words the WS's URI should contain the IP/domain name of "SAP Web Dispatcher" or other component, which handles the loadbalancing.
I think it could be done in ICM within WSCONFIG transaction, but I'm completely lost inside the setup. Also I was not able to find proper helpsap page with the description.
Is there a WEBLOG or any other document how to setup this ?
Thank you for your help in advance.
Regards
Tom

Hello,
You do not have anything to do in SAP transactions.
The HTTP load balancing is the SAP Web dispatcher job.
Just install and configure the web dispatcher. Follow HELP.SAP.COM, it is well explained.
We use this config to load balance 200 000 web servce calls/day on 5 abap application servers.
Regards,
Olivier

Two external monitors with macbook pro

attempting to use my MBP in clamshell mode with two external monitors. Only thing I get is the same screen on both monitors. I am also using VM Fusion running a windows xp interface.
Tried just mac software...same problem. Won't set up as two seperate monitors.
HELP

My understanding is that a "splitter" simply shares the same output signal between two monitors, causing both to display the same image at all times. That's exactly what you're seeing, right? So I think it's because you're using a splitter, instead of a device or devices that enable the monitors to receive different signals. Unless the manufacturer or vendor of your splitter can assure you otherwise and help you get your setup running the way you want it to, a better alternative would be to connect one monitor to your computer's video-out port, and the other to a USB port using an adapter like this:
http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/
Note that the monitor connected via USB won't be as responsive as the one connected to the video-out port.
A more expensive option that would enable both monitors to be equally responsive is the Matrox DualHead2Go. If you have a MBP with a Mini-Displayport or Thunderbolt port, you would need the DP Edition of the DH2Go.

ME 5.2 connection with two ECC systems

Hi Sergiy/Experts,
Need to connect ME 5.2 system with two ECC & SCM systems for a scenario. Is it possible to connect?
During SAPMEINT standard interface we get connection credentials point for only one ECC system.
How I can meet the scenario for ECC system?
will appreciate your help.
Thanks in advance

Hi,
Yes, it is possible. See my answer here:
http://scn.sap.com/message/14408145#14408145
There is a design limitation: plants must be unique across the different ERPs connected to the same SAPMEINT.
Regards,
Sergiy

Satellite P100: Can I connect two external monitor to VGA & DVI port at the same time?

The Satellite P100 comes with two external monitor port. A VGA and a DVI. Can you have have two external monitor working at the same time? Can you have two external monitor as well as your internal display working at the same time (for a total of 3 display at the same time?
Here is what I have confirm:
Internal display + DVI connector display
OR
Internal display + VGA connector display
Is it possible to have:
DVI connector display + VGA connector display?
OR
DVI connector display + VGA connector display + Internal display?

As far as I know this is not possible and you can use either DVI or VGA port.
For signal output can be used only one port for external display.

Can Same IDOC be sent to same Receiver with two different Message Mappings

Hello Experts,
Wierd doubt but want to confirm from you people.
Scenario:
One R/3 Sender
SAP XI :
One external Receiver :
IDOC is sent from R/3 to external receiver via SAP XI.
One interface has already been developed for the above scenario.
Now client wants another interface to be developed for the same IDOC. Might be the values would be different for some specific fields.
Doubt:
Is it possible to send one similar IDOC to one target system with two different Message Interfaces?
Ex: Created Message Interface 'A' and correspoding Message Mapping with an IDOC
Created Message Interface 'B' and correspoding Message Mappingwith an IDOC
Values would be different in the IDOC and would be triggered from SAP R/3. Basing on the specific value of a field in the IDOC , can we trigger a different Message mapping for the same receiver?
I donot see any reason in developing a new interface for the same IDOC but as per the situation mentioned above, can it be done?
Thank you
Alex.

Create two interfaces for target side.
If you want only one target interface should get data.
You can use simple interface determination. Use the condition tab and specify the field there but the value should be constant. e.g. if field has value EN it should go to First interface and if Field has value != EN it should go to second interface.
If you want to divide your message in to both target interfaces.
Multimapping also can help but only if both of your target interface need idoc data.
You can use ifexist standard node functions from UDF to choose between the field.
For multimapping you can go to messages tab in the message mapping and can add interfaces using + sign.
then when you see the design part you will see two messages.
Now Start with receiver determination in ID and create one receiver determination for the sender and receiver, this shows you have only one receiver.
In interface determination you have to choose extended and choose your mapping designed.
then both your interfaces automatically would appear.
Create two receiver agreements and one sender agreement.
thanks
hemant
Edited by: Hemant on Aug 28, 2008 12:29 AM

How to use two external monitors and Tecra M5

Hi ,
I've been used to work with two 17" monitors connected to a computer in extended desktop monitor view, ii've just changed Job and now i have the following setup:
a Toshiba Laptop connected to Toshiba Tecra M5 dockstation and one external 17" monitor connected to dockstation digital port that works fine.
I also have connected another external 17" monitor to the Dockstation RGB port but keeps black
I'ts really awful to work like this switching between the 17" monitor and the small toshiba laptop monitor.
What i'd like is to work with the two external 17" monitor, and keep the laptop monitor off, or if possible on.
Any ideas???
Any help will be very wellcome
Mari PAz

I have an M11-17V, and the docking station that came with it has 2 monitor outputs, analogue and DVI. I wondered what it would do if I connected a monitor to both. Windows recognised that it was faced with 3 screens (including the built-in one) and asked me to choose which 2 of the 3 I wanted it to use.
I was disappointed it would not allow me to use all of them TBH, but if your docking station is the same, it might answer your question.

Demantra - can it run with two Data Models in parallel?

Hello,
we face the following situation: we have items that have to planned on a daily basis; many other items, however, only need weekly planning.
Demantra only allows one base time unit in its data model. If we choose "daily" for all products, the system size will increase enormously.
If we choose "weekly" for all products, we can not plan our daily products for specific days in the week.
The idea is now to set up a Demantra System with two data models in parallel. Is this possible? Would they reside in different databases or database users?
The Business Modeller allows to create new models, but can they run in parallel? If they can, how would the user access the different data models?
Thanks for any hints on this!

Can you please elaborate on this issue?
Thanks

Working with two cams

I have shots from two cams which I am preparing to capture into Adobe Premiere.
I know there's a way to work with two cams-monitoring, but is it the case when capturing ?
I am capturing via Firewire. My card has more than one slot - so guess I can plug-in two cams at same time. But can I A/B between the two cams prior to capture (record) into Adobe ?
Or is the multiple cam into Adobe only for ''already captured'' shots ?
Thanks,
Rob

You need to capture the data streams separately (not simultaneously)

Spa3102 to spa3102 with two pbx

Hello everybody. I connected two PBX systems with two Linksys SPA 3102 and I have the following problem. When I put the phone on hook the line is not disconnected. Analysis: Site 1 ------ Sienens Hicom 100 Pbx Extension 29 is connected to spa3102 Line jack. Spa3102 Internet jack is connected to Lan Site 2 ------ Auerswalt Compact 4410 Pbx Extension 39 is connected to Spa3102 Line jack. Spa3102 Internet jack is connected to Lan The communication is OK but when I put the phone on hook after or before conversation I wait about 1 minute for the line to hang up. The Line is not disconnected immediately even if I just connect to the first spa 3102 by dialing the pbx's extension that is connected and put the phone on hook. I think that the problem is that spa does not understand pbx's on hook. Can I do something? Thank you in advance

Try following the recommended troubleshooting found on Sipura FAQ about connecting SPA3000/3102 on a PBX. Additionally , number 2 and 3 also has information on how to set the SPA to properly disconnect.

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.
I saved a new workspace and it did not help.
No problem before I went to Maverick.

I found the fix, go to System Preferences and open Mission Control and uncheck the box to keep monitors as they were (When switching to an application...........)

How can one use Mission Control with two monitors? Please bring Spaces back

How can one use Mission Control with two monitors. With Spaces I could treat each space as a single desktop.
SyBB

I use two monitors at work and have no issue. I have my mail set to use Desktop 1 and iTunes set to the second monitor of Desktop 1. I have browsers set to Desktop 2 and Fusion and RDC set to Desktop 3.
Two things that may help you. In System Preferences > Mission Control, disable the setting "Automatically rearrange spaces...". This screwed with assigning applications to certain spaces. And the other thing is don't use full screen on apps that support it. This just makes your second monitor superfluous.

Unstable system with two 20" monitors

Similar Messages

Maybe you are looking for