Unstalling and reinstalling iTunes on to a Windows XP
After accidentally erasing a needed program for iTunes it asked me to uninstall and then install. I am just wondering if after uninstalling if all my music will be lost?
Uninstalling and reinstalling will normally not affect the tracks and settings already in your iTunes.
That said, it's wise to make a backup of any tracks, videos, movies, etc. that you've purchased from the iTunes Store or that would otherwise be difficult to replace, and of your playlists, before you uninstall, just in case something would happen to go wrong.
Similar Messages
-
Uninstall itunes 10.4 and reinstall itunes 10.3 on windows vista
how do you uninstall itunes 10.4 and reinstall intunes 10.3 with windows vista.
what i have done is clicked to download itunes 10.4 again even though i already had it
this than gave me the option to remove itunes from computer i did this
then when i went to download intues 10.3 my copmuter said.....
" a later version of itunes has already been used'' or something like that..
any ideas on how to do thisYes you can without losing your music. Here is a link to a good website that helps people install and / or uninstall iTunes properly. It can keep you from going completely nuts if you are running into any problems trying to install, reinstall or uninstall iTunes! You can find step by step instructions there to help you if you can't remove or install iTunes for any reason or if it got corrupted somehow. It also has other reference links that have helped a lot of people from going completely nuts with iTunes problems: http://HowToUninstalliTunes.com
-
TS1363 i have unstalled and reinstalled itunes and still cant get my ipod on itunes
i keep getting a message saying that my ipod can not be connected i have uninstalled and reinstalled i tunes and it still not registering what can i do now thanks
Hi jim2744,
If you are having an issue with your iPod nano not appearing in iTunes when it is connected, I would suggest that you troubleshoot using the steps in this article -
iPod nano (6th generation) - iTunes Troubleshooting Assistant
Thanks for using Apple Support Communities.
Best,
Brett L -
My computer stopped recognizing my 6th gen nano. I have un then reinstalled itunes as I was prompted. Still nothing. My account is up to date and my last purchase was a few weeks ago. Apple wants me to purchase @ 29.99 an opportunity to speak to a tech. Hoping someone out there can offer some assistance. Thanks.
Hi jim2744,
If you are having an issue with your iPod nano not appearing in iTunes when it is connected, I would suggest that you troubleshoot using the steps in this article -
iPod nano (6th generation) - iTunes Troubleshooting Assistant
Thanks for using Apple Support Communities.
Best,
Brett L -
Trying to installe and reinstall Itunes on my PC Windows 7
Hey
Have problems with Itunes, it keeps popping up with a message saying:
"An unknow error occured (-42032)"
Just tried to go thru the whole charade with uninstalling all the Itunes programmes according to a search:
In your program list, locate the (6) components and remove them in this order: iTunes, Quicktime, Apple Software Update, Apple Mobile Device Support, Bonjour, and Apple Application Services (iTunes 9).
And then I re-installed from apple support....
even though the same error still occurs....
WHAT TO DO ????
PLEASE HELP ?the feature you are trying to use is on a network that is unavailable. Click OK to try again or enter an alternate path to a folder containing the insallation package "iTunes.msi" in the box below
Download the Windows Installer CleanUp utility from the following page (use one of the links under the thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select anyiTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
HT1211 When uninstalling and reinstalling iTunes does not help in coverting movies
From the Advanced menu, choosing Create iPod or iPhone Version,"Converting..." did not appear. Unstall and reinstall iTunes does not help. What else can i do to convert the movies so that i can download to my iphone?
See this on how to back up your music to removeable media, such as CD or DVD:
Backing up your music files in iTunes
It's a very good idea to do this, but know that uninstalling and reinstalling iTunes will not affect the music stored on your computer. -
I just updated iTunes to the 11.1.4.62 (as the pop up directed me to) on my Windows 8 machine. As a result iTunes will no longer recognize my 5th generation Ipod Nano (yes two). I receive a pop up saying "Ipod has been detected but could not be identified properly" I've followed the recommendations seveal times: a) disconnected and reconnected. b) rebooted computer c) unistalled and reinstalled iTunes d) tried different cables e) tried different USB porst f) rebooted Ipod.... the window keeps popping up like a middle finger (you get the point)
iTUnes WILL however, recognize my 4th gen Nano and my 80gb Video (classic) without problem
Needless to say, I'm frustrated and ticked off over all of this wasted time.
Anyone solved this issue yet?
Any good suggestions?
Please advise
Kindest regards,c) unistalled and reinstalled iTunes
Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." I have uninstalled and reinstalled iTunes several times with no success. I am running Windows XP Svc Pack 3. Help please.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99753) -
I have downloaded the latest Itunes update, but it will not install and I receive a message 'apple mobile device failed to start'. I have uninstalled and reinstalled itunes but still have the same problem!
Hi there willjay3976,
You may find the troubleshooting steps in the article below helpful.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W. -
After an iTunes update failed to install, iTunes won't open and I get the following two windows. Program can't start because MSVCR80.dll is missing from your computer, and iTunes not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) When I reinstall I get the same messages and ITunes won't open.
Click here and follow the instructions.
(98815) -
My phone is not showing up in itunes. I want to sync it. I have a MAC and I have restarted the phone, it's charged, I have the most current version of itunes. What do I do now? It says to reinstall itunes if you have windows but not for mac. Help!
With your phone plugged in, open Image Capture and see if the iPhone shows up. If not, you are having a sync problem. If it shows up in Image Capture, but not iTunes, I'd delete iTunes and reinstall it.
-
My ipod touch 4g does not show in Windows 7 or itunes, I've removed and reinstalled Itunes. I've done a factory default, and I've changed out cables. The ipod shows connected but does not show.
Did you remove and reinstall all the Apple software by:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Run this to see if it helps determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if you have an iPod or computer problem'
Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
At the last iTunes update about a week or so ago, my iTunes quit working. I do not remember the error at the time. I unistalled iTunes and attempted to reinstall. About 95% in the installation, there is an error. I cannot get by it. If I choose to "ignore" the issue, it says iTunes is installed. However, when I try to open iTunes the error: "The program cannot start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." I've tried this multiple times with no success. Any suggestions? Thank you.
Kel
I have a Toshiba Satelite laptop. Windows 7. Need iTunes 64-bit.Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99791) -
Hello Everyone,
I am a regular user of I-tunes but recently i dont know why but I got some error in Launching I-tunes. So as recomonded by "Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7" section. I started removing the products. But after removing Quick time, I tried to remove Apple Software Update but while uninstalling it gave error that "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." and the uninstall rollbacks.
Please send me a feasible solution to this problem.
Thank You.Uninstalling the iCloud control panel should allow you to do that folder deletion.
-
5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?
I have a similar issue - my iPod nano connects and is visible in Device Manager yet invisible in My Computer and iTunes. I've tried everything I can possibly think of to try and solve this myself, all in vain.
Mine is a nano 4G. I've been using it for quite some time without the slightest problem. I have been using WINAMP instead of iTunes to manage my darling nano.
Then, one fine day I bought a new computer and the nano would not show up in My Computer, though the nano display shows "Do not disconnect". On my old computer it worked (and still works) absolutely fine with win XP as well as with win7 (the later I currently use on my new/problematic computer, which I bought last summer and that's how long I've had this problem).
Of course, after several first attempts I gave up and installed iTunes. I've tried using the Apple support article "iPod not recognized in 'My Computer' and in iTunes for Windows":
- reset
- fully charged,
- cable works fine on two other computers
- in normal or disk mode makes no difference
- tried to find anything useful in the diagnostics mode
- reinstalled iTunes several different times since then to the latest version
- I've unplugged every other USB device except for my mouse and keyboard and tried several different USB ports on my motherboard (USB 3.0 and conventional), as well as trying different USB- related options in my BIOS.
- I've never used any Mac with this ipod
- I've tried fiddling with the win7 Services by stopping and restarting them and of course
- uninstalling the iPod drivers in Device Manager. After such an uninstall the ipod would automatically be recognised and "ready for use", i.e. being invisible in My Computer.
- Attempted to find any possible third-party conflict with msconfig or the possibility that my ipod is being confused for a network drive (for which I've disconnected my HDD, leaving only my SSD with the OS).
Sometimes, iTunes would note that iPod service (or something, can't remember exactly) failed to install properly and asked to try and repair it. I would click YES! and voila - no change! The ipod would rarely show up in iTunes on my problematic computer like this:
iTunes would warn me that the nano would need restoring so I would try and do it on my haunted machine upon which iTunes would freeze like you seen in the picture.
Despite this, I've updated and restored the nano on my father's computer to the latest version without any problems. This though, did not solve my problem in any way.
I can load music to my nano through my old computer (which for me is a real pain and hassle) and the gadget works normally in terms of its disconnected functionality.
I've taken my nano to the local service for repair and they said it was fine. Mercifully, they didn't charge for the diagnostics service (gee, thanks for not ripping me off!).
Here are two screengrabs from my Device Manager
and Devices and Printers screens on my comp:
That is my sad story as far as I can remember. It's most likely something with the drivers or something along those lines though I'm out of ideas at this point.
If you think you have any idea PLEASR HELP, I'M DESPERATE!
Maybe you are looking for
-
Unique ID generation in OIM 11.1.1.5
Dear All, I would like to generate the automatic unique ID during the user creation in OIM 11.1.1.5. Can any one please suggest me to do the customization for it and share some documents which can be helpful to me. Thanks Harry Edited by: Harry-Harry
-
i had a problem with firefox before saying that it was corrupted, so i restored it, and it fixed that problem. the actual browser still loads up but i havent used it just in case.
-
0FI_AR_4 Delta Timestamp
Hello, We are using 0FI_AR_4 to extract our AR line items. There seems to be a time delay of 1 DAY for us to get new/changed records. We are on SAP_APPL 603 level 0004. I went through the forum and also looked at SAP Note : 991429. This seems to be f
-
E-Mail while in PhotoShop?
Just got Adobe PhotoShop, and cannot figure out how to send a picture via an e mail in my Outlook 2007?
-
Google Maps API for flash not working on real device iPad
I use flash builder 4.5.1 to build app for Google Maps API for iOS (map_flex_1_20.swc), and it is working well even on the simulator on PC, but after I generate the IPA use FB4.5.1, and install on iPad , it not working at all, only show a while scree