Unstructured Name Parser - How to tell which Classification or Reclassification rules have been applied to a Name

I am using the EDQ Unstructured Name Parser and have a Name value that isn't getting parsed. I would like to know how the engine is classifying it or reclassifying it in order to set up some reclassification rules of my own to ensure that it gets resolved correctly.
The name is something like Thomas J. Hamilton,Jr ... I would expect it to classify as <valid Given>_<valid Initial>_<valid Family><P><valid Suff>. Given a data record, how can I trace it back to see how it was classified and resolved?

Hi Aaron,
For starters, you can change the parser to run in "Parse and Profile" mode in the Advanced Settings in order to output more intermediate metadata. Then I'd recommend filtering the data going into parser to isolate the record you're interested in. Either sample data in the reader in the run preferences or just insert a value check processor before the Parser.
Run the process through against and then look at the various steps of parsing in the different tabs of the results browser (Base tokenization, classification, unclassified tokens, etc.)
regards,
Nick

Similar Messages

How to tell which version of ipad I have?

I would like to know which version of the ipad I have and how to tell if its ipad2 or ipad3 ? I offten get this question but not sure how to properly answr it.

Here's the various iPad model numbers and order numbers. The model numbers are on the back of the iPad
Apple iPad Wi-Fi (Original) 16, 32, 64 GB
The wi-fi only iPad configurations are assigned model number A1219.
MB292LL/A is the order number for the 16 GB configuration. The 32 GB configuration is assigned MB293LL/A and the 64 GB configuration is assigned MB294LL/A.
Apple iPad Wi-Fi/3G/GPS (Original) 16, 32, 64 GB
The Wi-Fi/3G/A-GPS iPad configurations are assigned model number A1337.
MC349LL/A is the order number for the 16 GB configuration. The 32 GB configuration is assigned MC496LL/A and the 64 GB configuration is assigned MC497LL/A.
Apple iPad 2 (Wi-Fi Only) 16, 32, 64 GB
The wi-fi only iPad 2 configurations are assigned model number A1395.
MC769LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC770LL/A and the 64 GB configuration in black is assigned MC916LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC979LL/A, MC980LL/A, and MC981LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC954LL/A and MC989LL/A for the black and white 16 GB configurations, respectively.
Apple iPad 2 (Wi-Fi/GSM/GPS AT&T) 16, 32, 64 GB
The Wi-Fi/GSM/GPS iPad 2 configurations are assigned model number A1396.
MC773LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC774LL/A and the 64 GB configuration in black is assigned MC775LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC982LL/A, MC983LL/A, and MC984LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC957LL/A and MC992LL/A for the black and white 16 GB configurations, respectively.
Apple iPad 2 (Wi-Fi/CDMA/GPS Verizon) 16, 32, 64 GB
The Wi-Fi/CDMA/GPS iPad 2 configurations are assigned model number A1397.
MC755LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC763LL/A and the 64 GB configuration in black is assigned MC764LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC985LL/A, MC986LL/A, and MC987LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC755LL/A and MC985LL/A for the black and white 16 GB configurations, respectively.
Apple iPad 3rd Gen (Wi-Fi Only) 16, 32, 64 GB
The Wi-Fi Only iPad 3 configurations are assigned model number A1416
MC705LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MC706LL/A and MC707LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD328LL/A, MD329LL/A, and MD330LL/A, respectively.
Apple iPad 3rd Gen (Wi-Fi/4G LTE AT&T/GPS) 16, 32, 64 GB
The Wi-Fi/4G LTE AT&T/GPS iPad 3 configurations are assigned model number A1430
MD366LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MD367LL/A and MD368LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD369LL/A, MD370LL/A and MD371LL/A, respectively
Apple iPad 3rd Gen (Wi-Fi/4G LTE Verizon/GPS) 16, 32, 64 GB
The Wi-Fi/4G LTE Verizon/GPS iPad 3 configurations are assigned model number A1403
MC733LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MC744LL/A and MC756LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD363LL/A, MD364LL/A, and MD365LL/A, respectively.
 Cheers, Tom

How to tell which model G3 powerbook I have?

I recently purchased an older PowerBook G3 Series, but I don't have a Power Supply for it. Additionally, since the currently installed battery is dead (no charge on it), I don't have power to boot it up and use the system profiler to help me, either. Thus, I'm not completely positive of the specific model/processor I have, and I can't power it up to find out. So I don't know which model power supply to purchase. I've tried to get the specs by using the Apple Serial number, but when I type the serial number in at Apple's website, the website doesn't recognize the serial number (CK8191M8CVA). Just as a note here, this is the original serial number from the botton of the case ID tag. Just wanted to add that last bit of info to this post, in the hopes someone knows how to how to find out the answer to that question. That's for youe info.
Ernest Banz ([email protected])

Hi. First, if the Apple product is 7 years or older, it won't find the info on the machine on Apple Support. Try to find the Model number on the bottom of the PowerBook (an example: M2453 is the Original iBook). Then many places such as www.lowendmac.com or www.everymac.com have the info on the PowerBook. Also, to make it easier to search, do you know what type of PowerBook G3 it is? It could be the Original G3, Pismo, Wallstreet, or Lombard. Hope this helps!

HT201302 I am trying to upload pictures from my phone to my computer and I'm getting an error message that a photo is corrupted so it can't download. I don't know how to tell which of the photos is corrupted so that I can delete it and try again? Thanks

I am trying to upload pictures from my phone to my computer and I'm getting an error message that a photo is corrupted so it can't download. I don't know how to tell which of the photos is corrupted so that I can delete it and try again? Thanks!

If this is an iCloud account the Outbox only appears when sending an email, so if it is still trying I suppose it should be showing now (not sure though, hard to replicate this)
What type of email account?

How to tell: Which version of camera raw do I have?

How to tell which version of camera raw I have? The only Google search I found answering this question refers to is 2 years old and seems to no longer apply. There is no File, Edit etc. menu on the new version of Camera Raw with (Photoshop/Bridge CS6). I do use Adobe Application Manager to do my updates telling me if a new version exists or not, nevertheless I would like to know.

The F key works as described for me in CS6-ACR7.4 with ACR as the window with focus. The same function is available using the double-arrow-window icon at the right of the Preview checkbox near the top right of the preview area.
When in full-screen mode there is no title bar, but when I press the F key or click the double-arrow, again, ACR becomes smaller and I can see the title bar that includes the ACR version and camera model. This is on Windows7-64-bit on a 1600x1050 monitor. Perhaps you’re ACR’s title bar is off the top of the screen so you can’t see it, or maybe ACR optimizes some things if you have a smallish display—do you?
A plug-in is a program that interfaces with another program but is not independently runnable application, itself, bit is independently updatable, so in this instance, Photoshop doesn’t need to be downloaded and installed every time Adobe adds support for a few more cameras.

How do I tell which generation of shuffle I have?

How do I tell which generation of shuffle I have?

Hello jacqueline,
See this article.
http://support.apple.com/kb/ht1353
B-rock

How to tell which photos in iPhoto are HDR images.

Does anyone know how to tell which photos in iPhoto are HDR images. When I click on the Info button for the image it doesn't indicate if it was an HDR.
Does anyone have any information about this?
I'm using a new iPhone 5s with basically a new iMac.
Thanks,
Hagrid...

You can do a filter on your library with "File Status" is "Missing". The "File Status" query is not available by default, but you can add it by clicking the upper-right button in the filter window.
nathan

How can I tell which gen of iTouch I have?

How do I tell which gen. of iTouch I have?

See this Apple support document.
http://support.apple.com/kb/ht1353
B-rock

How to tell which JButton is clicked?

I have a layout with 3 panels. Each panel has an 'Add' button inside it. However, I can't work out how to tell which 'Add' button has been clicked by the user. Normally I would put code to select from the text on the button, but this time they are all the same. Any ideas how I can do it?
Thanks

DrLaszloJamf: Do you have a simple example that you
could post? I thought all
ActionListeners/MouseListeners in the same class had
to be dealt with in the same place.I'll give you an example in a mo', but here's another solution if you really
want one ActionListener to listen to multiple sources: explicitly set the
button's actionCommand strings. This string defaults to the button's text,
but can be explicitly set to anything you want. This is useful, for obvious
reasons, if you are writing a multilingual app (I'm Canadian, so that's
part of the furniture).
import java.awt.event.*;
import javax.swing.*;
public class Example implements ActionListener {
    private static final String MUG_COMMAND = "mug";
    private static final String WUMP_COMMAND = "wump";
    public void actionPerformed(ActionEvent event) {
        String actionCommand = event.getActionCommand();
        if (MUG_COMMAND.equals(actionCommand))
            System.out.println("doing mug action");
        else if (WUMP_COMMAND.equals(actionCommand))
            System.out.println("doing wump action");
        else
            System.out.println("neither mug nor wump: " + actionCommand);
    public static void main(String[] args) {
        ActionListener app = new Example();
        JPanel contentPane = new JPanel();
        JButton button1 = new JButton("add");
        button1.setActionCommand(MUG_COMMAND);
        button1.addActionListener(app);
        contentPane.add(button1);
        JButton button2 = new JButton("add");
        button2.setActionCommand(WUMP_COMMAND);
        button2.addActionListener(app);
        contentPane.add(button2);
        JButton button3 = new JButton("add");
        button3.addActionListener(app);
        contentPane.add(button3);
        JFrame.setDefaultLookAndFeelDecorated(true);
        final JFrame f = new JFrame("Mugwump");
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.setContentPane(contentPane);
        f.pack();
        SwingUtilities.invokeLater(new Runnable(){
            public void run() {
                f.setLocationRelativeTo(null);
                f.setVisible(true);
}

How to tell which node a session connects to in 9i RAC

I have a 6 nodes 9i RAC database. While running a process, how to tell which node it is connecting to?

Hi,
SQL> select inst_id, sid, username from gv$session ;
inst_id is the instance number a session is running on.
select from the v$instance view to know to instance number you are actually connect to
SQL> select instance_number from v$instance ;
INSTANCE_NUMBER
1
note the the "g" before the view "v$session", that's for GLOBAL (all instances of the cluster) : check the views gv$parameter, etc...
Fred

How to validate that Virsa RTA BAPI S have been transported to backend ?

Hi all,
As part of post installation tasks, pre-implumentation guide for SAP GRC AC says steps to validate.I have following doubts regarding that checklist.
1.How to validate that Virsa RTA BAPI S have been transported to backend systems.?
2.how to confirm that VIRSA AE/RE RTA transports were successfully imported with no errors?
3.how to confirm that AE/RE BAPI exist in the system.?
4.how to check whether RFC user account is created or not?
Thanks,
Joseph.

Hello Joseph,
Firstly Basis team do ot transport BAPI's related to GRC product.
This is add on product. They first install base component through SAINT and then through SPAM, support pack are installed.
You can go to spam and check as mentioned by Jasmine and if you don't have access to SPAM, then please go to Menu
System -> Status, click on the magnifying glass and check for component VIRSANH.
Basically what GRC delivers for connecting to Backend systems are not BAPI's, they are RFC's.
And all these start with name /VIRSA/.........
Regards,
Surpreet

Would like to verify Time Machine backup but when I enter TM and then open iPhoto, it only provides me a gray window telling me the size of the file. How do I make sure all iPhoto pictures have been backed up on Time Machine?

Would like to verify Time Machine backup but when I enter TM and then open iPhoto, it only provides me a gray window telling me the size of the file. How do I make sure all iPhoto pictures have been backed up on Time Machine?

HaJo-aus-BS wrote:
Since Snow-Leo time machine offers an option to verify backups, but I have found that it does not work for external disks attached by USB or FireWire.
Yes, that's for network backups only.
What can I do to make sure that the backups are OK?
You can tell if the File System (the various directories, catalogs etc.) is ok by repairing your backup drive, per #A5 in Time Machine - Troubleshooting.
You can "spot check" whether the Time Machine "Star Wars" display seems correct.
You can do a full system restore to another disk per #14 in Time Machine - Frequently Asked Questions, then start up from it and see if things are there and seem to work.
You can keep "secondary" backups (always a good idea). See #27 in the FAQ post for some suggestions.

I live in Australia but when I upgraded to IOS6 it changed my App Store region to the US. How can I change it back? I have been trying to find the answer.

I live in Australia but when I upgraded to IOS6 it changed my App Store region to the US. How can I change it back? I have been trying to find the answer.

Contact iTunes support & request they clear the balance:
http://www.apple.com/support/itunes/

I spend good money for my iPhone i have the iPhone 5 with the new charger slot which is smaller. I have been through at least 3 charging cords and this is not acceptable to me. i never had a problem with this on my older phone. apple needs to correct tho

I spend good money for my iPhone i have the iPhone 5 with the new charger slot which is smaller. I have been through at least 3 charging cords and this is not acceptable to me. i never had a problem with this on my older phone. apple needs to correct this and reimburse me for this cord.

Charging cords are covered by the iPhone warranty or their own warranty
if puchased separately. Take your iPhone and the cords to your local
Apple store for evaluation and possible replacement.

I downloaded music to my iphone and when I went to go sync it up to itunes, I lost all of the songs purchased from that time until the previous time I backed it up. How do I recover these purchased songs that have been lost?

I downloaded music to my iphone and when I went to go sync it up to itunes, I lost all of the songs purchased from that time until the previous time I backed it up. How do I recover these purchased songs that have been lost?

All of your music should be in itunes on your computer.
Select it to sync and sync.

Unstructured Name Parser - How to tell which Classification or Reclassification rules have been applied to a Name

Similar Messages

Maybe you are looking for