Unsuccessful Mail configuration OBIEE 11g

Hi,
I followed procedure given in below site by creating an id in gmx.com, but still not able to get it . Still receiving the error
http://obieemanu.blogspot.com/2011/06/obiee-11g-configure-oracle-bi-scheduler.html
Could any one please let me know whether I have missed anything.
Waiting for your reply ASAP...
Regards,
Sreekar Suri.

what is the error you are getting when u r configuring that will help us in helping you/providing the solution for the corresponding error

Similar Messages

  • Error while configuring OBIEE 11G OPMN Service during Installtion

    Hello,
    i tried installing 11G with simple install on Vista and didnot work, I think 11g does not work on Any Vista and not sure of W7
    second, i tried installing the same on Windows XP and the installtion worked fine till the end and while configuring OPMN Services,
    the OBIPS Services and OBICCS services failed, i retried to configure this services with "retry" option but never worked, so i skipped this part thinking that
    i can configure this manually. finally i was not able
    weblogic's Admin server, Managed server, Node manager and Analytics.war deployments are all healthy in EM Console and Weblogic console
    the Fusion Middleware control in EM Console shows the BI Components are not started and i tried restarting it and but never started.
    so i think there is something wrong with OPMN configuration at the end of installtion
    is there a way to trouble shoot this.
    i tried searching of SAWSERVER service so i can start the manaully, but it did not start
    i did a softwareonly install on top this single instance installtion thinking if that can help me, but it didnt
    so please anyone help me
    Thanks
    Kumar

    Hi Kumar,
    I believe OBICCS is the Oracle BI Cluster Controller Service. That particular service requires a static IP address. A lot of people use the loopback adaptor to accomplish.
    Here's a quick rundown of some things you should check before installing OBIEE 11g.
    1. Make sure you have a static IP (use a loopback adaptor if you have to).
    2. Make sure your static IP adaptor is the first adaptor in your connections list. You can do this by going to Control Panel -> Network and Internet -> Network Connections -> Advanced. Use the up and down arrows to ensure that the static IP is the top of the list.
    3. Make sure you hosts file (c:\Windows\system32\drivers\etc\hosts) has the proper entry for the static IP address. For example, if your computer is called MyComputer and your static IP is 192.168.0.1, then the first entry should be: 192.168.0.1 MyComputer. Note: You may need to have your domain on your entry. ie. 192.168.0.1 MyComputer.mydomain.com.
    I recommend you check those things. If you missed one of them, fix it and then back out the 11g install and re-install.
    Good luck and if you found this helpful, please award points!
    -Joe

  • Security service error in OBIEE 11G LDAP configuration

    Hello
    I've recently set up some OBIEE 11G installations and they appear to work ok.
    I've more recently been using various guides on the internet to configure OBIEE 11G and Active Directory and can see the users and groups within Weblogic that belong the to the Provider that i've configured.
    However, when I attempt to start up OPMN, it always gives me the error like the following: 
    <Jun 24, 2013 1:45:38 PM NZST> <Warning> <oracle.jps.idmgmt> <BEA-000000> <Requested Object Class (user)not found in cache.
    oracle.security.idm.OperationFailureException: Requested Object Class (user)not found in cache.
    <Jun 24, 2013 1:52:20 PM NZST> <Error> <oracle.bi.security.service> <OBI-SEC-00004> <Unable to initialize oracle.bi.security.service.SecurityWebService>
    I initially had the User Object Class as User in the Provider configuration and noticed it wasn't in the LDAP directory so I tried changing it to a Object Class that did exist for one of the users but it made no difference.  It still says the same error message even though I have no reference to User in the configuration.
    Can anyone suggest something I might be doing wrong or missing?

    I have followed the same configuration. However i am getting the following error when i try to login
    Caused by: oracle.bi.security.service.SecurityServiceException: SecurityService::authenticateUserWithLanguage - '<LDAP user>' was authenticated but could not located within the Identity Store.
    I guess some configuration issue, but cannot be able to spot the error. Please let me know your idea
    Thanks

  • OBIEE 11g - BI Server Login

    Hello Gurus
    1. I have successfully Installed and configured OBIEE 11g suite.
    2. I am able to connect and import meta data.
    But when I go to BI Server home page (/obieehome) And enter username and password. It does not validate.
    I have tried all username and passwords that came in as part of installation process but no luck.
    I would think the default username DEV_BIPLATFORM should work, but no such luck.
    So, now, I am not sure anymore which is the username I should be using in order to log in to BI Server home page. Any idea?
    My weblogic console is just fine.
    Thanks,
    R

    In addition to my OP, below is some more information.
    The OBI installation generated following file with all links. How can I know which username belongs to which link? I could not see a document anywhere on web that would tell me this. Thanks, R
    Type: Simple Install
         Installation Details
              Middleware Home: c:\FINAL_OBIEE
              BI Oracle Home: c:\FINAL_OBIEE\Oracle_BI1
              WebLogic Server Home: c:\FINAL_OBIEE\wlserver_10.3
              BI Domain Home: c:\FINAL_OBIEE\user_projects\domains\bifoundation_domain
              BI Domain Name: bifoundation_domain
              Instance Home: c:\FINAL_OBIEE\instances\instance3
              Instance Name: instance3
         Configure Components
              WebLogic Console
                   http://localhost:7001/console
              Oracle Enterprise Manager
                   http://localhost:7001/em
              Business Intelligence Enterprise Edition
                   http://localhost:9704/analytics
              Business Intelligence Publisher
                   http://localhost:9704/xmlpserver
              Real-Time Decisions
                   http://localhost:9704/ui

  • OBIEE 11g as a service in windows

    Here are the steps to configure OBIEE 11g as windows service.
    Admin server and bi server needs to be configured as service.
    Create boot.properties files with weblogic admin username and password in security folder.
    Here are the changes I made to make it work. I created two copies of installsvc.cmd file in wls_home/server/bin and renamed them to be used in scripts and make changes.
    One for admin server and other for node manager (bi server).
    cmd file for admin server.
    SETLOCAL
    set DOMAIN_NAME=bifoundation_domain
    set USERDOMAIN_HOME=D:\BI\user_projects\domains\bifoundation_domain
    set SERVER_NAME=AdminServer
    set MEM_ARGS=-Xms256m -Xmx512m
    cd %USERDOMAIN_HOME%
    call %USERDOMAIN_HOME%\bin\setDomainEnv.cmd
    call "D:\BI\wlserver_10.3\server\bin\installSvc_Admin.cmd" --see comment below.
    ENDLOCAL
    Added delay parameter.(it is in milliseconds)
    rem *** Install the service
    "%WL_HOME%\server\bin\beasvc" -install -svcname:"beasvc %DOMAIN_NAME%_%SERVER_NAME%" -delay:120000 -javahome:"%JAVA_HOME%" -execdir:"%USERDOMAIN_HOME%" -maxconnectretries:"%MAX_CONNECT_RETRIES%" -host:"%HOST%" -port:"%PORT%" -extrapath:"%EXTRAPATH%" -password:"%WLS_PW%" -cmdline:%CMDLINE%
    CMD file to start BI server and make it wait for the admin server to come up.
    SETLOCAL
    set DOMAIN_NAME=bifoundation_domain
    set USERDOMAIN_HOME=D:\BI\user_projects\domains\bifoundation_domain
    set ORACLE_BI_HOME=d:\BI\Oracle_BI1
    set SERVER_NAME=bi_server1
    set PRODUCTION_MODE=true
    set ADMIN_URL=t3://hostname:7001 - if you are using ssl it is should be t3s
    set MEM_ARGS=-Xms256m -Xmx512m
    cd %USERDOMAIN_HOME%
    call %USERDOMAIN_HOME%\bin\setDomainEnv.cmd
    call "D:\BI\wlserver_10.3\server\bin\install_OBIEE_Svc.cmd"
    ENDLOCAL
    In install_OBIEE_Svc.cmd (copy of installsvc.cmd) file added dependency and delay parameter
    rem *** Install the service
    "%WL_HOME%\server\bin\beasvc" -install -svcname:"beasvc %DOMAIN_NAME%_%SERVER_NAME%" -dependency:"beasvc bifoundation_domain_AdminServer" -delay:12000 -javahome:"%JAVA_HOME%" -execdir:"%USERDOMAIN_HOME%" -maxconnectretries:"%MAX_CONNECT_RETRIES%" -host:"%HOST%" -port:"%PORT%" -extrapath:"%EXTRAPATH%" -password:"%WLS_PW%" -cmdline:%CMDLINE%
    I have tested it and it works.
    Provide feed back to this thread, works or fails. This allows me to update the comments with solution to any problem faced.
    Edited by: SP Reddy on Nov 10, 2010 1:38 PM

    Hi
    Have managed to run oc4j as a service as follows under xp pro
    Download runexescv from http://www.judoscript.com/goodies/index.html
    Unpack and run
    Create service say OracleOc4j
    Needs basic parameters setup
    Cmdline and Home
    My setup is
    debug=false
    cmdline=c:\ora9ias\jdk\bin\java - Dorg.omg.CORBA. ORBClass=com.inprise.vbroker.orb.ORB -Dorg.omg.CORBA.ORBSingletonClass=com.inprise.vbroker.orb.ORB -Doracle.security.jazn.config=c:\ora9ias\j2ee\Oracle9iDS\config\jazn.xml -Doracle.home=c:\ora9ias -DORACLE_HOME=c:\ora9ias -jar c:\ora9ias\j2ee\home\oc4j.jar -userThreads -config c:\ora9ias\j2ee\Oracle9iDS\config\server.xml
    ( all from startinst.bat )
    home=C:\ora9ias\j2ee\home\
    Save and close
    Oracleoc4j will now be set up as service
    Change service to auto and start service !!
    Appears to be neat and easy way of setting up an OC4J service
    Ian

  • Sending mail alert in obiee 11g

    Hi I am using obiee 11.1.1.7 (SampleApp Virtual Appliance 305). I have configured in EM & created alert but not able to send mail.
    I thing i have to do some modification in instanceconfig.xml & biee-domain.xml, can anyone please tell me by which code I have to modify both files & in which section.
    Thank & Regard,

    Hi,
    I have got solution by following side...
    http://obieemanu.blogspot.in/2011/06/obiee-11g-configure-oracle-bi-scheduler.html

  • Image configuration in OBIEE 11g

    Hi,
    I am aware of image configuration in OBIEE 10g. Now I want to implement in OBIEE 11g, where I want to add the image. Which service I want to restart?
    Thanks,
    Satheesh

    Hi,
    To Change Login Image in OBIEE 11g:
         We have to keep the image in this path and control of length,height,color resides in login.css file which is present in the same path.
    \\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1\7dezjl\war\res\sk_blafp\login\
    To Change Images in reports in OBIEE 11g:
    \Middleware\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1\7dezjl\war\res\s_blafp\images
    \Middleware\Oracle_BI1\bifoundation\web\app\res\s_blafp\images
    To Change the Top Image:
    /fmw/Oracle_BI1/bifoundation/web/app/res/sk_blafp/b_mozilla_4
    No need to restart the services,just clear the cache and reload files and metadata.
    Thanks,
    DPK.

  • OBIEE 11g 11.1.1.6.0 configuration  creating domain failed

    Hi
    I am trying to install OBIEE 11.1.1.6.0. My installation failed during configuration stage of " Creating Domain".
    When i check the log file i see the following error . can you please help me?
    C:\OBIEE\Oracle_BI1\OPatch\opatch apply C:\OBIEE\Oracle_BI1\oneoffpatches\p6599470_111070_Generic.zip -oh C:\OBIEE\Oracle_BI1 -silent -jre C:\OBIEE\Oracle_BI1\jdk
    OPatch failed with error code = 1
    [2012-05-02T20:32:51.188-04:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 15] [ecid: 0000JSFjdb75yW^5xV_AiW1FcR_X000006,0] stderr=[java.lang.NoClassDefFoundError: Files[[
    Caused by: java.lang.ClassNotFoundException: Files
         at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
    Could not find the main class: Files.  Program will exit.
    Exception in thread "main" ]
    Edited by: 931665 on May 2, 2012 7:55 PM
    Edited by: 931665 on May 2, 2012 10:16 PM

    Hi,
    What sort of installation you are trying to do..???
    Enterprise or Software only..?
    From where you have downloaded the OBIEE 11g 11.1.1.6.0 dump..? edelivery or from other source..??
    Your error is saying that patch +"p6599470_111070_Generic.zip"+ is missing.
    Down load it from oracle and apply the patch. The details, How to apply the patch will be provided in that zip file only.
    Thanks.

  • OBIEE 11G error while installation at the configuration setting(ASinstance)

    Hi Experts,
    I am trying to Install OBIEE 11G on Windows on Local PC.But getting the following error .
    "Exception in thread "AWT-EventQueue-0" java.lang.OutOfMemoryError: PermGen space" at the configuration step of ASinstance.
    I have set the virtual memory to maximum.Machine's RAM is 2 GB and Virtual memory is 4 GB which meeets system requirement for OBI.
    I have treid few options but nothing seems to workout :( . and even Downloaded and tried to Install the software again.
    Any help on this highly appreciated.
    Amit

    Hi Dhar,
    below is the log file content:
    opmn.log:
    Error Message from opmn.log file:
    [ERROR:1] [] [libopmncustom] Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1035801255:1640) [No addresses matched the properties for the request]
    [ERROR:1] [] [libopmncustom] Hi Dhar,
    below is the log file content:
    opmn.log:
    Error Message from opmn.log file:
    [ERROR:1] [] [libopmncustom] Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1035801255:1640) [No addresses matched the properties for the request]
    [ERROR:1] [] [libopmncustom] Ping failed in Ready callback for proc:1035801255
    All other log files (presentation, bi server, scheduler, cluster controller) contains the following error message:
    Error Message: The configuration file (C:\obi\user_projects\domains\bifoundation_domain\config\fmwconfig\jps-config.xml) was not found or is inaccessible.
    As per comments posted by you here: https://cn.forums.oracle.com/forums/thread.jspa?threadID=2326091
    I checked FMW_SECURITY_SERVICE_URL parameter in the NQSConfig.ini file.
    This parameter is using VIP (admin server listen to this) and not the actual IP of the server.
    Should I change this URL and point it to actual IP.
    What is the procedure to change this parameter using EM?

  • LDAP configuration error for SampleLiteApp in OBIEE 11g

    Hi Experts,
    I am trying to configure the LDAP for "SampleAppLite" application which comes with OBIEE 11g default installation in OBIEE11g. I followed the following steps in the oracle document,
    http://download.oracle.com/docs/cd/E14571_01/bi.1111/e10543/privileges.htm#BABCDCFE
    Unfortunately i am getting the following exception when i start my OBIEE server, not only that after this also i am getting same error when i try to login using the any of the user (User is LDAP).
    (initially MyBISystemUser as <user_id> )
    ++java.security.PrivilegedActionException: oracle.bi.security.service.SecurityServiceException: SecurityService::authenticateUserWithLanguage - '<user_id>' was authenticated but could not located within the Identity Store.++
    ++at oracle.bi.security.service.SecurityWebService.authenticateWithLanguage(SecurityWebService.java:185)++
    ++at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)++
    ++at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)++
    ++at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)++
    ++at java.lang.reflect.Method.invoke(Method.java:597)++
    ++at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:92)++
    ++at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:74)++
    ++at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:151)++
    ++at com.sun.xml.ws.server.sei.EndpointMethodHandlerImpl.invoke(EndpointMethodHandlerImpl.java:265)++
    ++at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:100)++
    ++at weblogic.wsee.jaxws.tubeline.FlowControlTube$FlowControlAwareTube.processRequest(FlowControlTube.java:155)++
    ++at weblogic.wsee.jaxws.tubeline.FlowControlTube$1.run(FlowControlTube.java:94)++
    ++at weblogic.wsee.jaxws.tubeline.FlowControlTube$1.run(FlowControlTube.java:92)++
    ++at javax.security.auth.Subject.doAs(Subject.java:337)++
    ++at weblogic.wsee.jaxws.tubeline.FlowControlTube.processRequest(FlowControlTube.java:91)++
    ++at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:604)++
    ++at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:563)++
    ++at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:548)++
    ++at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:445)++
    ++at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:373)++
    ++at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:524)++
    ++at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:255)++
    ++at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:141)++
    ++at weblogic.wsee.jaxws.WLSServletAdapter.handle(WLSServletAdapter.java:210)++
    ++at weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke.run(HttpServletAdapter.java:311)++
    am i missing any configuration? Or is it a bug in oracle OBIEE 11g? Can anyone guide me to resolve this issue.
    Much appreciate your answer

    Though this is little late for you but may help others.
    Check default authenticator and ensure that control flag is NOT set to REQUIRED
    Check here http://onlineappsdba.com/index.php/2011/06/21/unable-to-login-to-obiee-anylytics-after-oid-integration-user-was-authenticated-but-could-not-be-located-within-the-identity-store/

  • OBIEE 11g installation failed multiple times at Distributing Repository Configuration Step

    Hi,
    I am getting the following error during the Distributing Repository Configuration step in the OBIEE 11g 11.1.1.7 enterprise installation in Windows 8 system.
    Severe: Element Type:Domain
    Element id: null
    Operation result: failed to obtain domain file lock
    Detail Message: java.util.concurrent.timeoutException.Timeout;
    waiting for lock: Domain config lock;
    c:\OBIEE\MIDDLE~1\USER_p~1\domains\EAM_DO~1\config\FMWCON~1\biee-config.lock;[121 secs]
    Step Distributing Repository failed
    Configuration Action 'Distributing Repository' has failed. Please check logs for details.
    Step Distributing repository failed
    I checked another blog for this https://forums.oracle.com/thread/2565716 and even there the explanation doesn't convince me.
    I tried to look at the Locale of my system where I am installing and I could see it is using Eng-Us by default. One way suggested to check the Unicode format from the web browser and I could check that too to be UTF-8 as suggested by someone on some other blog.
    I checked in the logs too as suggested by the Installation dialogue box but it didn't seem much conclusive too.
    Here is the snapshot of the log file which I could found.
    INFO: Current Inventory:
      Oracle Home: OraDb11g_home1
      This Oracle Home has not been changed in this session.
      Oracle Home: OH1858390736
      This Oracle Home has not been changed in this session.
      Oracle Home: OH440082373
      This Oracle Home has not been changed in this session.
      Oracle Home: OH440082374
      This Oracle Home has not been changed in this session.
      Oracle Home: OH1597391518
      This Oracle Home has not been changed in this session.
      Oracle Home: OH1285215443
      This Oracle Home has not been changed in this session.
    INFO: Ending the inventory Session
    INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
    INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
    INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    Can someone please help me with this since I am stuck with for quite some time now.
    Is there any way to check in command prompt to check the locale as required by the system.
    What could be the issue here?
    Thanks,
    Nitin

    Hi all,
    We are able to resolve the above issue with the below solution.
    Root cause of the issue:
    You may have a temp directory in the path C:\Documents and Settings\user_name\Local Settings\Temp. You got the above mentioned exception because of the temp directory path having spaces_+ in it.
    Solution:
    1. Create a new directory called TEMP in a different location for ex: C:\TEMP
    2. Now, Right click on My computer --> Properties --> Advanced --> click on Environment Variables.
    3. You should be having TEMP and TMP as variables under user variables section pointing to the C:\Documents and Settings\user_name\Local Settings\Temp path.
    4. Edit the TEMP and TMP variables and mention C:\TEMP in the variable value.
    5. Deinstall and re-install OBIEE 11g.
    Happy OBIEE 11g installation!!
    Thanks,
    Rajesh Gurram

  • Not able to configure Act As in OBIEE 11g - The application is logging out

    Hi All,
    We are trying to configure Act As in OBIEE 11g. The list of users gets populated when I click on Act As. However, when I select any user from the list, the applications logs out. The possible reason could be that OBIEE is not able to authenticate the user (We are using table based Authentication). Please give some pointers to fix it.
    Also, I am curious to understand the authentication process in case of Act As. The list that gets populated is a list of target users from the table. In our case, the username and display name gets populated. But, how does OBIEE check if that is a valid user or not?
    Thanks in Anticipation,
    Karan

    Does Act As functionality work with BI Publisher? I am able to login and select Act As and pick a user and view all dashboards, however when I click a PDF embedded in a dashboard page from Publisher, it says Unauthorized Access: please contact the administrator. If I am logged in as myself I can view the PDF. If I am logged in as the user I acting as I can view the pdf, but if I login as myself and act as that user and try and view it, that is when the error occurs, so am wondering is Act As is incompatible with BI Pub.

  • OBIEE 11g on Windows 7 64 bit - Error while configuring????

    Hi Experts,
    I am installing OBIEE 11g on Windows 7 64 bit. And I followed below steps:
    1. Installed JDK 64 bit.
    2. Installed Weblogic Server with 64 bit JDK.
    3. Installed OBIEE 11g - Software only Installation.
    4. Ran configuration script. cofig.bat.
    5. Configuration Wizard opened and during the configuration process(step 10 of 11) got an error. Refer below screen shot for the error.
    6. I got the same error when I tried installing 11g on Win server 2003 32 bit and I installed JRocket MissionControl and reinstalled 11g and there are no errors.
    7. So, remembering that I installed JRocket Mission Control 64 bit.
    8. Un installed previous 11g.
    9. Reinstalled 11g on Windows 7 64 bit.
    10 And coming to configuration part it gave same error. Don't know what to do.............can any one help me at this point.
    http://img690.imageshack.us/img690/1342/obiee11gconfigerror.jpg
    Thanks in advance,
    DK

    Hi All,
    I've got the same error but with the installation of OBIEE 11g on Windows 32-bit.
    I also tried to continue the installation, but I've got another error in the Executing: opmnctl start coreapplication_obisch1.
    Even with those errors, I finished the installation but of course I've some problem with the presentation server and webLogic, becasue they're not configured properly.
    Any idea how to solve the problem?
    Thanks

  • Configuration issue related OBIEE 11G coreapplication_obips1

    Hi All,
    My issue is related to configuration of OBIEE 11g,
    My installation is successful on windows server 2003, with Enterprise Install
    but this coreapplication_obips1 is failing to configure anybody has any idea to resolve this,
    Why this error is coming,
    once I have uninstalled OBIEE 11g to resolve,
    Thanks to all experts

    Hi,
    Not sure about the behaviour in 11g, but we faced a similar issue in 10g while passing the presentation varaibles to detail report where main/detail report where coming from different subject areas. The behavior was a little unpredictable. To overcome this, we tried using request variable instead of presentation variable and it worked for us.
    You can give it a try by doing the same and see if it works for you.
    Thanks

  • Modifying the configuration files in OBIEE 11g

    Hi
    We are facing an error when we tried to to add "<DashboardMaxBeforeMenu>" tag in the instanceconfig.xml manually and restart the presentation services of OBIEE 11g .
    I had come across few suggestions that, configuration files in OBIEE 11g cannot be modified manually. I am doubtful on these suggestions . So please, let me know for sure wether we can modify the configuration files in OBIEE 11g manually or not.
    It will be very helpful if the process to modify the configuration files in OBIEE 11g is shared with us.
    Thanks.

    Hi,
    I could not tell you whether the; <DashboardMaxBeforeMenu>10</DashboardMaxBeforeMenu> still works in 11g.
    What I do know is that you could manually edit the configuration files. The only thing is when you modify this file via the Enterprise Manager, your customizations get lost. You have to manually add them again.
    Cheers,
    Daan Bakboord
    http://obibb.wordpress.com

Maybe you are looking for