Unsupported Media Format after Update

I've just done the latest update and have a really strange problem, i'm not after a fix but wondered if anyone might have an idea.
Since doing the latest update when I have a headset plugged in while trying to play either music or films i get the error "This file contains an unsupported media format" when I unplug the headset it works ok with no errors, it even works with a bottom end cheap headset, but refuses to work with the ones I have been using with it for the last 3 months. The headset isn't faulty as it works with everything else i have tried it on.
Ok, a little bit more info to confuse the matter. and it's the voulme display that gives the pointer.
With an Apple headset plugged in it works ok, the Volume buttlons on side show "Headphone Volume"
With My headset it doesn't work, the Volume buttlons on side show "Headset Volume"
If i plug a 3.5 mm extension in with either headset it works, the Volume buttlons on side show "Line out Volume"
So i wonder how it know what is plugged into the port.

Still a problem today for me as well. The files play fine using the stock media player and over BT connection to my car head unit. It also plays fine over my BB ear buds however when I plugged in a set of external speakers through the earphone jack I get the unsupported media format message. I can't believe that there is still no fix for this over four months after the original post.

Similar Messages

Problems reading RAW format after update 6.03

I have problems reading RAW format images into Iphoto 9.6 after update 6.03 or maybe earlier updates (have not imported for a few months). The images show up like half, black or partly distorted. I use a Canon 5D mk2 camera. The images looks okey when read into a PC so I don´t think it is the camera or cables. It has been working very good before! I use a Powerbook pro 13 late 2011 with Yosemite 10.10.1.

Try downgrading back to 6.02 by following the directions in this post by léonie:
Apple image including Apple logo changes for feature 126 Apple image ends here
Dec 28, 2014 7:36 AM
Re: Digital Camera Raw Compatibility 6.02 - Nikon D800
in response to ceylin.e
[DocumentBodyStart:3bf5afd7-94e9-4fb4-acfa-7aa13198efec]
Make a backup of your system and try to downgrade the RAW support to version 6.01
To downgrade the RAW Support to the last version from before the last update try this:
To reinstall the 'RAW Compatibility Update' it is necessary to uninstall the currently installed raw support. Otherwise the installer will rightfully say, that you already have the latest version installed.
If your tests are showing that the problem happens also in a different user account, try this:
The RAW support files are installed in the System Library in the folder "/System/Library/CoreServices" Folder:
To open this folder, use the Finder's "Go" menu. Click the smiling Finder icon in the Dock to bring the Finder forward.
Then type the keyboard shortcut ⇧⌘G (for "Finder > Go > Go to folder") and copy and paste "/System/Library/CoreServices" into the text field. Click the "Go" button.
In the Finder window that will open, delete both the files "RawCamera.bundle" and "RawCameraSupport.bundle". You will have to enter your Administrator password. (don't empty the Trash, so you can put the files back, if need be)
Download the current RAW support update from Apple's Support Site:
Digital Camera RAW Compatibility 6.01 http://support.apple.com/kb/DL1777?viewlocale=en_US&locale=en_US
In the Downloads folder you will find the disk image with the installer. Double click it to open and run and the installer.
Then restart your Mac.

Unsupported Image Format after update

I support a fair number of Macs, and if someone tells me that one day the computer did something and then the next day would not and they didn't change a thing I would know they were wrong. Something changed but they don't know what changed.
I use Aperture 1.5.2. I installed the RAW updae for PPC. Great. Aperture opened the NEF files.
Next day it would not opwn NEF files, showing 'unsupported file format'. I swear So I reinstalled and the installer said it wasn't necessary.
I don't know where to even begin looking to resolve this. Any ideas?
Michael
too many to mention, really Mac OS X (10.4.8)

I'd try and split the problem in half.
Will Preview.app open the NEF file in question? It uses the same RAW image support (as delivered in the update you applied) as Aperture.
If it won't, then there's something about the RAW update for PPC that has got broken/modified/disturbed.
If it will, then it's Aperture that is being awkward (is it the same NEF file? It has been said that sometimes an image needs to be reimported if support for it wasn't present at the time when it was previously added to Aperture's library.)
just a couple of ideas.

Missing media files after update

I did a back up and updated my 8520. Now the media files are missing. did a restore but did not help. What went wrong?

Hi
You haven't given much to go on. Please explain what you did and what software you used in addition to the following
Blackberry Model.
Carrier Name.
Do you have a Data Plan?
Operating System Version go to Menu > Options > About - it looks like v5.0.0.681
Memory for Device and SD Card Options > Memory
Any error statement or code.
The Exact nature of problem - the more info the better.
When this started and whether it started just after an update or new App download and which App/s theme/s download.
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

Cannot format after updating Firmware!!

' I was able to format with the original firmware, but now I have updated it with the new version and cannot format it! Creative, please help!

+ Before installing the firmware, I could format the memory by the following steps:
) Press the "delete" and turn on the camcorder. Then I get some information on the screen such as serial number and?available memory space. It also prompts?the user?to press "Play" and "Delete" (if I remember correctly)?on the bottom of the screen.
2) Then I press "Play" and "Delete" to format the memory.
After I updated the firmware the screen with the same information appears but the prompt for formatting is not there anymore. When I press "Play" and "Delete" it does not format.
Hope this helps!

Invalid Format after updating iOS

I just updated my ATV 2 to the latest version of iOS an now my Plasma says "invalid format" whenever i start the ATV 2. No video, no audio.
Unplugging didn't work exactly. I can see the apple symbol at start-up but then the "invalid format" sign from the TV shows again.
Can anybody help?
Cheers!

So you disconnected everything and resotred through iTunes? Hmm, I updated mine and it's working fine. Maybe it is the TV? Maybe try calling support or taking it in and have them check.

Can't export (queue) out of ppro into adobe media encoder after update

i just updated everything (cuda, nvidia, os 10.8.2, 6.0.3) and now i can't export from ppro into adobe media encoder. as soon as i export out with any preset across multiple projects and hit play, i get the sheep sound almost immediately. before this gets put in the AME discussion queue consider that AME works fine either when importing an AE composition etc. so it seems to be premiere related. thanks!

Actually I'd recommend uinstalling all the adobe software on your PC if possible. Because truthfully if you have a decently fast internet connection or you have the installer for the suite on your system it really doesn't take that long to do a complete install. Plus when you do a complete install it's much more likely to fix the issue plus then you can use the Adobe CS cleaner tool which makes your odds for success much higher so that is what I'd recommend. If you follow the instructions from this link everything will go smoothly.
http://www.adobe.com/support/contact/cscleanertool.html
I know in the past I have fallen into the trap of troubleshooting something for a few days, only to end up uninstalling then using the adobe CS cleaner tool, then reinstalling and then BAM everything was now fixed lol...
Then I always ended up feeling silly for spending so much time on it instead of just doing a fresh install. Although I had no way of knowing that to begin with unfortunately. Hindsight is 20/20 most of the time.
However you can technically try uninstalling Premiere by itself if you want to try that first. If my memory serves me correctly when you uninstall Premiere it will uninstall Encore and AME as well.

Unsupported Image Format after opening a file in Photoshop.

As from today,I am getting an unsupported Image Format after opening a file in Photoshop. I have made nothing more than as crop on the image. Why?

Ernie, I misread your post indeed. I never saw a option to send RAW files to an external editor. All I can see is the option to chose what editor and then specify if PSD or TIFF is used. I always use PSD, usually 16bit and in one other installation in 8bit (due to RAM restrictions there).
So Aperture creates the PSD version and PS edits that very version and saves it back into aperture. This is where I sometimes () get that "unsupported image" problem.
I think this also is what Mike does: select a RAW master, use an external editor -> Aperture creates a PSD or TIFF. I haven't tried the TIFF option , though.
My main point was: it all worked for a very long time and with the latest updates it is broken.
have a good day.
Roland

Media files hidden after update 10.6.8 to Mavericks.

Hello world,
I'm running Snow Leopard 10.6.8 on an iMac 21.5" from 2010: 3.06 GHz Intel Core 2 Duo, 4 GB DDR3, 500GB.
My problem came about when I updated from 10.6.8 to Mavericks. I downloaded Mavericks from the app store. When I tried to install it, it wouldn't let me because it said my internal HD was being used for Time Machine (even though I had Time Machine switched off). So I plugged in my WD USB 3.0 external drive and installed it with that. After the update, it had me create a new default user account, which I did. But now all my media files are hidden and I can't open my media folders on my Macintosh HD. I used Disk Utility to verify and repair disk on my WD external and on the iMac's HD.
Question is, where did all my files go? I believe they're still on my HD, I just can't access them? I was under the impression that after updating to Mavericks that I could just use my old login and all my files would be there, but they aren't. I'm seeing some symbols on my folders, which I can change to have permission to open them, but the files still aren't there.
I also tried the dummy account trick, but to no avail. I could have made a mistake in trying that one though.
Any help for me to see my hidden media files would be helpful. Thanks!

Hello world,
I'm running Snow Leopard 10.6.8 on an iMac 21.5" from 2010: 3.06 GHz Intel Core 2 Duo, 4 GB DDR3, 500GB.
My problem came about when I updated from 10.6.8 to Mavericks. I downloaded Mavericks from the app store. When I tried to install it, it wouldn't let me because it said my internal HD was being used for Time Machine (even though I had Time Machine switched off). So I plugged in my WD USB 3.0 external drive and installed it with that. After the update, it had me create a new default user account, which I did. But now all my media files are hidden and I can't open my media folders on my Macintosh HD. I used Disk Utility to verify and repair disk on my WD external and on the iMac's HD.
Question is, where did all my files go? I believe they're still on my HD, I just can't access them? I was under the impression that after updating to Mavericks that I could just use my old login and all my files would be there, but they aren't. I'm seeing some symbols on my folders, which I can change to have permission to open them, but the files still aren't there.
I also tried the dummy account trick, but to no avail. I could have made a mistake in trying that one though.
Any help for me to see my hidden media files would be helpful. Thanks!

Unable to link media to MTS files in Premiere CS6 after updating to 10.8.3

I am now unable to link media(MTS files) in Premiere pro CS6 after updating to 10.8.3. Instead of the folder where the MTS files where there is now "AVCHD" with the quicktime symbol. When I control click, it just offers me with the quick look option. Any advice would be very much appreciated.

Make a "Genius" appointment at an Apple Store to have the machine tested.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

How do I "mask" or blurr out sections of movie clips saved in windows media format in After Effects

I was informed that I needed to use After Effects to "mask" or blurr out sections of movie clips saved in windows media format.
I have the movie clip in composition, I see the effects and presets drop box on the lower right.
How do I insert the text blocks to mask certain areas of the movie clip?
Thank you,
Preston

Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC) | After Effects region of interest
There's seriously nothing more to say. Watch some tutorials, read the help, learn the program.
Mylenium

IE8 unsupported error after updating to ZCM 11 Support Pack 1 (11.1)

Does any experience this problem after updating to ZCM11sp1?
I keep getting IE8 unsupported error after updating to ZCM 11 Support
Pack 1 (11.1) although I am running on IE8 already. Now remote
management is not working because of this incompatible browser errors. I
tried this following
link:http://www.novell.com/support/viewCo...9158&sliceId=1
But it does not help.
Any suggestion or idea would be greatly appreciated!!!

On 8/29/2011 8:26 AM, craig wilson wrote:
> Double Check all of your settings there, including the option to view
> Intranet sites in compatibility mode.
>
> For some reason, your IE8 is reporting itself as IE7 and running in IE7
> mode which is no longer supported.
>
> On 8/29/2011 9:17 AM, April wrote:
>> Does any experience this problem after updating to ZCM11sp1?
>>
>> I keep getting IE8 unsupported error after updating to ZCM 11 Support
>> Pack 1 (11.1) although I am running on IE8 already. Now remote
>> management is not working because of this incompatible browser errors. I
>> tried this following
>> link:http://www.novell.com/support/viewCo...9158&sliceId=1
>>
>>
>>
>> But it does not help.
>>
>> Any suggestion or idea would be greatly appreciated!!!
>
>
Thank you for your responding. I have already checked to view Internet
sites in compatibility mode with no luck. I tried several different
computers with IE8 but they all got the same problem.

After updating os to 10.9.1can't open pdf files. I get a message saying It may be damaged or use a file format that Preview doesn't recognise. I can still read older saved files but no new ones arriving by email. Any help would be appreciated.

After updating os to OSX 10.9.1 I can't open any new pdf files. I get a message saying It may be damaged or use a file format that Preview doesn’t recognise. I can still read older saved files but no new ones arriving by email. Also can't attach a pdf to an email to send out. Any help would be appreciated.

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print PDF's displayed in Safari, you may be able to print by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar may appear under the cursor. Click the printer icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others — I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

Unsupported image format after merging aperture libraries

I've experienced a large number of files with 'unsupported image format' after merging aperture libraries from separate external hard drives. I did not have this problem in either library prior to merging them. Can anyone advise how to rectify this issue? Thanks

Try running library repair on the merged library and see if that helps.
To run the repair open Aperture while holding the option and command keys down. Select Repair from the menu.
Post back if you still have the problem.

Receive unsupported media format message

When transfering songs purchased from the Real Music Store to iPod Nano (using Real Player 10.5), I recieve an "unsupported media format" message. It is important to note that the same songs transfer to my iPod 30GB video player. Real support indicated a potential issue with 5th generation iPods but it is unclear whether or not the recently purchased Nano would be considered as such. Thanks in advance for any help.
HP Media Center Windows XP Media Center

have had no trouble burning and playing CD-Rs on other media (i.e. CD player, car radio).
Media is what the info is on such as a CD, DVD or floppy.
A player is CD player, car radio, computer, etc.
Open iTunes prefs -> Advanced - Burning.
Make sure it is set to Audio CD, NOT MP3 or data.

Unsupporte​d Media Format after Update

Similar Messages

Maybe you are looking for

Unsupported Media Format after Update