Unsupported file error when uploading video file to iTunes U
I downloaded one of my video file and remove the track afterwards. However, when I trying to reload the video files back to the site again, I got "Unsupported File" error for some of them. My files are withing 50MB ~ 500 MB range, codec of H.264 and AAC.
Any suggestions/
Could someone please give some suggestions? I've been stuck with these "Unsupported File" for a week...
Similar Messages
-
Error in InfoPackage: Error when uploading Flat Files
Hello Experts,
I encoutered this error in Info Package when uploading a flat file.
When i try to click on the "Preview" button, this errors appear:
"Error 8 when compiling the upload program: Row
237, message: Data Type / BIC/ CCCBMA1_COCTR2 was found in a newer"
Please help to advise what is this error about and how to resolve this?hi Annie,
run RSA1 and try again
Error when compiling the upload program (Message no. RSAR233)
other similar problem solved by run program(SE38)RS_TRANSTRU_ACTIVATE_ALL and relogon
A newer version of the data type error when loading
Flat File Preview error message
Error when loading from Flat File
Error message when previewing data in InfoPackage
hope this helps. -
Need help in URI scheme is not ¨file¨ error in uploading .PDF file
I am getting the URI scheme is not file error when I am uploadin a .PDF file
I am using the following piece of code
String lPathPrefix = "gopher://muceap10.muc.amadeus.net/User Step Folders/BPS_Files/Outlooksoft CPM/01 - Production Environment/01 - Documentation Library/01 - Documents/Daily_Checks/";String lPath = (lPathPrefix + doccolvalue).replace(" ", "%20");
URI lURI = new URI(lPath);String lPathPrefix = "file://muceap10.muc.amadeus.net/User Step Folders/BPS_Files/Outlooksoft CPM/01 - Production Environment/01 - Documentation Library/01 - Documents/Daily_Checks/";
String lPath = (lPathPrefix + doccolvalue).replace(" ", "%20");
URI lURI = new URI(lPath);
Can anyone please help me in solving this problem
I will be very much greatful to you,
Thankx.Did you get to resolve this error? We are also getting the same error and not able to figure out.
Edited by: Joe A on Nov 10, 2008 5:09 PM -
SharePoint 2013 Foundation error when uploading Excel files
Hello
I have a specific problem. I have an xlsx file that I cannot upload in SharePoint. Normally our SharePoint can upload Excel files and other file formats normally but this one has data with nearly 5000 rows. The size of the file is less then 500 KB. The error
message is: "The URL is invalid. Perhaps it refers to a nonexistent file or folder, or it refers to a valid file or folder in the current Web." When I am uploading this file I am getting the same error message in every library. When I save
the file as a 97-2003 compatible xls then it works. Sometimes even Excel files with Macros won't upload.
Kind regards
ivicapro1987Hi,
This issue occurs when the Version column is configured as an Indexed Column.
To work around this issue, remove the Version column from the list of Indexed Columns for the list that has this issue. To do this, follow these steps:
Browse to the list where the issue exists.
In the ribbon, click the Library tab, and then click
Library Settings.
In the fields list, click Indexed Columns.
In the Indexed Columns list, click Version.
Click Delete, and then click OK.
Upload any files that you previously experienced the issue with.
Reference:
https://support.microsoft.com/kb/2796640?wa=wsignin1.0
Best Regards,
Eric
Eric Tao
TechNet Community Support -
hi
im uploading a file using the GUI_UPLOAD and when im doing the command
OPEN DATASET x_file FOR INPUT IN TEXT MODE ENCODING DEFAULT MESSAGE msgid.
Its retrurning me an error 'No such file or directory'
The file does existHi,
Input file is in presentation server means use GUI_UPLOAD
If it is in application server then only you need use
OPEN DATASET
READ DATASET
TRANSFER DATASET
CLOSE DATASET
Hope it will helps -
Error when uploading a file to an e-mail
When I try upload a file to send with email ( transaction SO00 )the next error occurs:
"Include file in PC application. Try again?".
I don´t know what is the problem, because the the file is not in use by another application, can someone help to me?
(I have another 2 systems and I haven´t this problem in this 2 other systems...)
Thank youHello,
I have finded the error. It was in OAC0 transaction in where for SOFFDB repository the storage type was wrong, because it was selected 06 RFC archive instead of 03 R/3 database.
Thanks you -
Error when uploading par files - Exception
Hi all,
I'm getting an error when I try to upload any par file of the MSS package through the administration console. The error thrown is:
Messages:
INFO: Detected Portal Archive File: com.sap.pct.hcm.attendanceoverview.par
INFO: Application successfully stored in the PCD
Messages from Server ID 8657950
ERROR: Operation failed: The archive com.sap.pct.hcm.attendanceoverview has not been deployed.
ERROR: Exception caught: com.sapportals.portal.prt.runtime.PortalRuntimeException: [PortalApplicationItem.prepare]: com.sap.pct.hcm.attendanceoverview
The error is displayed in the administration console. The logs don't say anything useful. I'm getting a few exceptions about finding archives and this error message: get data source CVERS failed! Trying SAP/BC_UME...
I have checked the rights to all directories and the directory structure. We're running EP6.0 with SP 9.
Thanks for your time.
regards,
DionHi Dion,
i would think that SAP tries to stop uploads of par files which should be installed with them SDM or import of a whole package.
Try the following :
- rename the par file name from com.sap.... to something else...
or :
- import the par into Developer Studio and change the project name
change/delete the META-INF files
Another question : why do you want to install only certain elements of the MSS package ?
Regards,
Kai -
Error when uploading BAI File (EBS)
hi,
When im uploding the BAI file through FF_5, it is displaying error as "The difference is too large for clearing".
In Reocrd 16, the BAI code is "195" for Wires In.
My understanding is, it is not picking the Customer Invoice for clearing.
I gave the Same Invoice Amount in the File with Invoice Reference number in Record 16.
I checked Tolerance limits, they r fine.
Please let me know the solution as soon as posible.
I will the add points.
Regards
ShyamJust test the WDR_TEST_UI_ELEMENTS component and try to upload a file using upload element in above component.
If you still get same error for all file types
Perhaps someone incorrectly set the maximum request size parameter: ( icm/HTTP/max_request_size_KB )
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/69ef8be8a607d6e10000000a42189c/frameset.htm
Regards
Srinivas
Edited by: sanasrinivas on Aug 12, 2011 4:43 PM -
"Red Error" when importing video files
Hello, I tried importing video files (.MOV) into Final Cut Pro X but this "red file error" just comes out and I don't know what to do. I even tried importing my video clip from my iSight camera but it just shows that red error. I feel like every video file imported gets "redded". I don't know how to solve this problem. Thank you all!
- MT
P.S. Final Cut Pro X 10.0.3You have "Proxy media" selected under Preferences->Playback, but you are not creating proxy media for your clips on import. That's why you get the red clips.
This is easy to solve. Either:
1) Create the proxy media for your clips, by control-clicking, and choosing "Transcode Media..." and checking the box for proxy media;
or
2) Choose "Original/Optimized media" in Preferences->Playback.
Proxy media uses less disk space and is easier to handle than either the original or optimized media, but is of lower quality; but you can do all the editing in proxy, and then just before you are done, switch again to original/optimized. This way you get lower overhead when editing, and still get the better quality result.
This may be even more relevant for older, less powerful macs, or when you need to use an internal drive, or a slow usb drive with FCP X. If you have a fast mac and a fast drive, you can work away without transcoding, for the most part (multicam clips and other heavier edits may still warrant a transcode). -
Error when uploading; the file name is invalid, or the file is too big
Hi, I have posted this topic also in this thread, but we are not getting any answer to this problem. Also, the existing discussion in this thread gives us no idea what to do.
We get the a.m. message when using the "FILE-UPLOAD" UI element only for selected users and for these only in IE8 and not in Firefox.
So we believe that the cause for the error is likely on the client side, especially in some IE settings.
Is there any advice available what to look for and where to check?
Thanks in advance,
M. BüttnerHi,
Please check with following link.
Link:[Uploading Notepad File in Webdynpro ABAP;
Link:[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/69ef8be8a607d6e10000000a42189c/frameset.htm]
Thanks,
Renuka S. -
FTP Delivery error when uploading big file
Hi,
I've setup a Schedule with Delivery through SFTP. Usually (when the output size is not very big) it works fine.
However, when my report (pdf) is too big, the job's status remains "Running" forever. When I go to my FTP directory the file's size is always 91.906.794 bytes. I checked BI Publisher's cache and the generated output is there but its size is always bigger than 91.906.794 bytes. That file works fine when I open it in Adobe Reader.
Somehow, it seems that BI Publisher can't upload files bigger than 91.906.794 bytes but I can't find any maximum size in the documentation. And besides, I guess that if there was any maximum size, it should throw an error instead of getting stuck in "Running" status.
I'm running Oracle BI Publisher version 11.1.1.6.0 in Red Hat Enterprise Linux Server release 5.5 (Tikanga). I've tested this feature in 2 different servers and the result is exactly the same.
Anyone had this problem?
Thank you,
TiagoHello,
Here is the all possible fixes to upload large file, please check and verify with your settings:
http://blogs.technet.com/b/praveenh/archive/2012/11/16/issues-with-uploading-large-documents-on-document-library-wss-3-0-amp-moss-2007.aspx
http://blogs.technet.com/b/sammykailini/archive/2013/11/06/how-to-increase-the-maximum-upload-size-in-sharepoint-2013.aspx
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
Keynote 6.2.2. has started giving me errors when I drag & drop a M4V movie file onto a slide:
11/3/14 2:17:02.605 PM Keynote[4280]: *** Error: -[TSPExternalReferenceDataStorage newBookmarkDataRelativeToURL:] TSPExternalReferenceDataStorage.mm:193 Error creating bookmark relative to URL file:///Users/myusername/Documents/notes/MyPresentation5.key/
11/3/14 2:17:03.000 PM kernel[0]: Sandbox: Keynote(4280) deny file-read-xattr /Users/myusername/Documents/notes/MyPresentationRev5.key
I believe this started sometime after I repaired my disk permissions.
I also notice that in a spotlight search for Keynote, the icon is missing.
This feels like a disk permissions issue or something. Any ideas?I tried deleting Keynote.app and reinstalling it from the Mac App Store. It's still broken.
When I try to add a M4V file to keynote I get this error
11/3/14 7:02:00.716 PM Keynote[4968]: *** Assertion failure #1: -[TSDMovieCompatibilityChecker initWithAsset:] TSDMovieCompatibilityChecker.m:56 invalid nil value for 'asset'
When I open an existing presentation, I get dozens of these errors:
11/3/14 7:00:49.460 PM Keynote[4968]: *** Error: __59-[TSPExternalReferenceDataStorage performReadWithAccessor:]_block_invoke TSPExternalReferenceDataStorage.mm:251 Can't resolve URL
Sigh. -
File error when importing .mp4 files
Hi there,
I have a problem concerning importing files.
I had some .mkv files, which I converted to .mp4 files with just 1 audio track and no subtitles using Handbrake.
Problem is, I can't import these files into Final Cut Pro 7.
It gives the following error:
"File error: 1 file(s) recognized, 0 access denied, 1 unknown."
I have no problem importing .avi files, or .mp4 files that haven't been converted.
Does anyone know what I should do? I don't know any other program to convert .mkv files, so basically, I'm bound to using Handbrake.
Thanks in advance!!I didn't know Handbrake was such a bad tool.
I never did much video-editing before, so I usually used iMovie, and the Handbrake-converted files worked fine with that.
And I did what you said, I converted the video to .mov with MPEG Streamclip, using the mentioned presets, but now I have another problem.
A 22 minute file, which was 360MB before converting, turned into a 6.2GB file after converting.
Since I use videoclips from a TV Serie, which has over 60 episodes, this is going to cost a lot of space. Is there any way to reduce the filesize without destroying the video quality, or is there any, ANY, way to make FCP accept .mp4 files?
I don't care if it slows down my Mac or anything, it's just that I know it's possible, with the 700MB file from one of my posts above. -
File permission when upload the file on HP-UX
hello,
There is noe program is written to upload file from local machine to unix/linux server at location /app/test/.
Both directory has rights 777. owner of the test directory is lets "xyz"
Now written program upload file as "xyz" user at location /apps/test/.
The file permission of uploaded file if -rw-r-----
Now my problem is - i want file permission -rw-r--r--
I cant give rights manually everytime with chmod command.
Is there any other way to change file permission of uploaded files????
output of umask of "xyz" user is 000
The same code is working properly on linux but i m getting different file permission on HP UX
Thank you....Multipart request is not handled as www request.
UploadBean might help you :
http://www.javazoom.net/jzservlets/uploadbean/uploadbean.html -
Technical Error when uploading a file using java 1.6.0_17
When I'm uploading a mp3 file size 84.01 Mb i get the following message:
Warning-Security
Name:MyFTPUploader
Publisher:JavaAtWork
From:http://mixes.djfez.com
A box is ticked if you always trust the content from this publisher and then there is the option to run or cancel.
The Message then states that The digital signature was generated with a trusted certificate but has expired.
I then choose to run the application.
I then choose the file from my hard drive to upload(a mp3 file 84.01 Mb), select upload and then the file gets to about 5-7% uploaded and then a message appears Technical Error with an x in a 8 sided pink 2D figure.
Here is what is shown on the Jarva Console:
Java Plug-in 1.6.0_17
Using JRE version 1.6.0_17-b04 Java HotSpot(TM) Client VM
User home directory = C:\Users\Owner\Downloads
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
Reading certificates from 10215 http://mixes.djfez.com/admin/myftpuploader-standard-signed-v131.jar | C:\Users\Owner\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\61\66a2727d-46f2f117.idx
MyFTPUploader Standard Edition version 1.3.1
© Copyright JavaAtWork 2005-2008. All rights reserved.
Reading certificates from 11 http://mixes.djfez.com/admin/labels.jar | C:\Users\Owner\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\27\7b49829b-46cb6a8e.idx
220 ProFTPD 1.3.0 Server (DreamHost FTP) [66.33.200.61]
331 Password required for mixes.
230 User mixes logged in.
200 Type set to I
550 uploads/2707/: No such file or directory
550 uploads/2707/: No such file or directory
250 CWD command successful
257 "/uploads/2707" - Directory successfully created
250 CWD command successful
257 "/uploads/2707" is current directory.
227 Entering Passive Mode (66,33,200,61,148,196).
150 Opening BINARY mode data connection for LittleJohn_Happier_Beats_Vol_1.mp3
Dec 7, 2009 9:40:45 PM - FTPUploadTask - upload() - java.net.SocketException: Connection reset by peer: socket write error
Dec 7, 2009 9:40:45 PM - FTPUploadTask - logout() - java.net.SocketException: Connection reset by peer: socket write error
Operating System is Windows Vista Home
If anyone could help me overcome this error it would greatly be appreciated.If anyone could help me overcome this error it would greatly be appreciated. Java questions here concern programming, not product support.
Connection reset by peer: socket write errorThat says that the server, where the file comes from, closed the connection.
The most likely possibilities
1. The client software is not correctly communicating with the server. Solution: fix the client
2. The server is not correctly handling this request. Solution: fix the server
3. The server doesn't want to talk the the client. Solution: fix both the server and the client.
From the above unless you are in a position to fix something then you do not have an option.
If you yourself cannot fix either of those then this is a vendor problem and you must contact the vendor (creator) of the software client and/or server. You would do that somewhere besides this site.
Maybe you are looking for
-
I cannot download any of the new episodes that I recently purchased. It begins to initiate the download but then the status bar in iTunes goes blank and no activity is displayed. I cannot get it to download through the "download previous purchases" e
-
Recently My friend bought a Pentium 4 Machine pre-installed with Windows 2000 Professional. He downloaded Oracle 8i Enterprise and when we tried to Install it there was no response. But when we tried the Same Oracle in Pentium III its working fine. W
-
Java Error by installation of NetWeaver 7.01 ABAP Trial Version
If i try to install "New SAP NetWeaver 7.01 ABAP Trial Version" on Windows XP SP2 in 3 seconds after start I get this errormassage : Java.lang.noclassdeffounderror: run Exception in thread "main" and then is installer dawn. What is to do? Plaese help
-
Will Thunderbird function if I have only a GANDI email account with no gmail or other webmail?
I began Thunderbird with synch to my gmail. I then added a GANDI account and email address. In a couple of months, I may wish to eliminate my gmail account entirely. I shall then have no webmail at all, just a GANDI account and address. Will Thunderb
-
How to apply same editing to further audio tracks...
Hello all, i've just made a very complicated sync between a video and audio track within an FCS project. The video was untouched and i edited the stereo audio track. Now i would like to apply the same editing to the .ac3 version of the just edited st