Unsupported item the plugin for your selected item is not installed...

I am getting this 'unsupported item' error and I can't figure out why. I have the FPGA module and the RIO module installed.  Is this a version error? I think I may have 2014 labview, but there is only rio up to version 13? Thanks for any help.

niraj267 wrote:
I think I may have 2014 labview....
"I think" and "may" does not really give any useful information.
Open MAX and find out exactly what you have installed.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • The software for communicating with ipod is not installed correctly..

    Everything used to work fine on my laptop. I'm fairly sure it was after I had uninstalled Zune crap from my laptop when my iTunes started messing up and saying "the software for communicating with ipod is not installed correctly".
    I've searched the whole internet front to back about this error and most things I find are from 2005'ish. I've tried changing the registry permissions, reinstalling itunes, clearing out everything that has to do with itunes, doing all the msconfig things, manually starting the ipodservice.exe.
    I still cannot figure it out and I've had this error for like 3 months. Only thing that I notice that MIGHT be odd is that I'll have ipodservice.exe running (from System) and when I open iTunes another ipodservice.exe will open (from my username) and then close after a few seconds and then I plug my ipod up and bam, the error from above comes up. Anyone have any clue? Like I said everything worked fine at one point!
    Thanks!

    Another thing is that iPod Touch shows up fine...I've tried every other ipod from older 4gig Nanos to 120gb Classics and none of them work..this is really annoying!

  • My new IPOD "the software for communicating with ipod is not installed pro"

    The message "the software for communicating with ipod is not installed properly keeps on showing up no matter what I do.
    I have removed the program several times and reinstalled it several times. I have updated my windows. I have tried just about evertying. I have wasted several hours on this ipod, I am about to return it and be over with it..
    I have even went to the homesite to download the updates and the newest version of ipod manager.
    My ipod charges from the USB port but I think it is recognising it as a seperate drive.
    I dont know what else to do.

    Welcome to Apple Discussions.
    Are you using Fast User Switching in Windows XP? If so, logout the other users first.
    Check this: iPod shows up in Windows Explorer but not in iTunes, iPod Service Error or Please reinstall iTunes

  • "Some of the applications in your iTunes library were not installed..."

    "...because one or more errors occurred."
    I've been getting this message for a couple of weeks now. Basically iPhone is unable to update any new versions of ANY applications downloaded to iTunes. I was hoping that 2.1 would fix this but looks like it hasn't, much to my disappointment. This is an infuriating bug. Is there anything that can be done about it? Really not happy about this.

    I think I may have found a real solution (NOT a workaround) that both fixes the problem AND preserves specific app data, though I can't take credit for it (that belong to an Apple Store "Genius" somewhere in the US of A). It first appeared in another related thread:
    http://discussions.apple.com/thread.jspa?threadID=1685284
    It goes like this:
    "+1. Upgrade to iTunes 8 and iPhone 2.1+
    +2. Sync iPhone so you have a backup (I make a zip of my backup directory and save it off just in case - see http://tech.kateva.org/2008/08/iphone-backups-are-stored-in.html for details)+
    +3. Restore iPhone to original state using the restore button on the info tab. This wipes the phone.+
    +4. When the phone mounts iTunes will ask if you want to treat it as a new phone, or restore from backup.+
    (An addendum: I've done a couple of restores in the past - for unrelated reasons - and have come across the "Locked SIM" and "Emergencies Only" problem after the restore. This appears to be a problem with the reset phone suddenly not recognising the SIM. I don't know if this is a widespread issue, but it certainly seems to be the case for Vodafone SIMs, but I do know that the fix is to simply remove the SIM - while the phone is on - and replace it. I might add that this is Vodefone's universal fix for all SIM-related problems.)
    +5. Restore from backup. This doesn't restore everything -- but don't worry.+
    +6. Sync (this will take a while if there's music involved).+
    +When all is done everything should be in place. In the past the restores still left me with a lot of cleanup, but this time I only had to arrange a few icons. My passwords were restored.+
    +Now, why do I think this will solve the problem?+
    +When I did this iTunes said I had no updates. The App Store on the iPhone said I had 4 updates. I actually used the App Store to apply the updates -- a process that has NEVER worked in the past and has been trouble for many people. This time it smoothly applied the updates, and when it was done it said there were no more left."+
    I've now had an opportunity to test this and can report success - phone now updates apps from either App Store or iTunes correctly - all the updates sitting in App Store were applied smoothly - and there's no data loss.
    Some caveats:
    1. DON'T attempt this first thing on a workday morning (like I did) - the process can take a long time.
    2. Switch to "Airline" mode - a call right in the middle of the process will terminate it and you'll have to start over.
    3. I run a Mac system, so I don't know if the fix works for Windows or other OS users. Reports back from Mac OS people are running at 100% fixed so far.
    4. It appears to be the combination of the latest phone OS (2.1) and iTunes 8 that lays the foundation for this fix. Make sure you've got both installed BEFORE you start this process.
    Please report back on success or otherwise.

  • HT5457 Upgraded iphone 4 to IOS 6.1 Can not restore apps. "Some of the applications in your iTunes library were not installed because one or more errors occurred" error message

    I made the mistake of upgrading my iPhone 4, a seemingly innocuous task if you follow the Apple commercials' rhetoric.
    Now I can not restore any of my apps and before I go to far, I am wondering if I wil be able to restore my purchased apps?
    Is there an easy fix, before I waste hours on the phone with Apple tech support?
    Why is it becoming so complicated to run a telephone?
    Thanks
    O

    I made the mistake of upgrading my iPhone 4, a seemingly innocuous task if you follow the Apple commercials' rhetoric.
    Now I can not restore any of my apps and before I go to far, I am wondering if I wil be able to restore my purchased apps?
    Is there an easy fix, before I waste hours on the phone with Apple tech support?
    Why is it becoming so complicated to run a telephone?
    Thanks
    O

  • Some of the apps in your itunes library were not installed on the iphone because they are not compatible with this iphone

    I've just spent 2 hours before work last night, and another 3 since getting back, trying to figure out why iPhone 3G syncs kept dropping my Skype and Shazam apps.
    Performed 3 full time-consuming restores.
    Then every other bit of online advice I could find.
    Clicking "reset warnings" finally revealed this ( image included )
    I had always trusted iTunes to know *** phone I had . . but I guess not.
    Then a chat with a Skype agent reveals they don't support older versions . .  or my 3G phone without iSO.4 !
    Are ALL companies so out of touch with those struggling in the economic realities since 2008 ?!
    Apple, Skype, etc . . . . "Hey Gang !, don't forget to update every blessed time we innovate relentlessly !!  Buy, buy, buy !!  . .  or ----- BYE !

    DmR of AtoZ wrote:
    Are ALL companies so out of touch with those struggling in the economic realities since 2008 ?!
    Apple, Skype, etc . . . . "Hey Gang !, don't forget to update every blessed time we innovate relentlessly !!  Buy, buy, buy !!  . .  or ----- BYE !
    To answer that question you would have to ask those companies.
    To get around the issue, you could always install the older versions of those apps that do support iOS4, if you still have them or can find them.

  • The plug-in for the selected item is not installed on your system

    Hello,
    When I want to build an application there is a "!" mark before the application and for  the Installer,  in the Project Explorer under Build Specification.
    When I ask for "explain warning" I got the message "The plug-in for the selected item is not installed on your system"
    Previously it worked well, whats happend?? (during my holyday's )
    Thanks for help, Huub

    Well, something obviously changed. Install any software and/or hardware recently? Using any hardware in your LabVIEW project? Could be the drivers for that hardware got corrupted. Try identifying what you're using and reinstall the drivers.

  • The item is not available for your selected device

    Greetings  for everybody 
    really  i read this statement a lot 
    and i have  blackberry q10 
    and just i want to install viber for blackberry and i saw this "the item is not available for your selected device" 
    and its not for one app
    if u have  anything to do tell me i want to install a lot of appssssss from app world  
    thanks for  reading  
    sorry for long message  
    thanks agian 

    Viber10 is not released for the Q10, currently only for the Z3, Z10, Z30 and P9882 models
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • When I purchase music through iTunes from my MacBook Pro, my iPhone 4 iTunes app cannot detect those purchase to allow them to download to my phone. If I open up the iTunes app and select "purchased music not on this iphone" it tells me "All of your a

    When I purchase music through iTunes from my MacBook Pro, my iPhone 4 iTunes app cannot detect those purchase to allow them to download to my phone. If I open up the iTunes app and select "purchased > music > not on this iphone" it tells me "All of your available music has been downloaded to this device." However, my purchases are not yet downloaded to the iphone and not available to download. If I go to "purchased > music > all > recent purchases" it will show me the purchases that were most recent the last time I synced my phone, but not the purchases since then.
    Any thoughts on how I can remedy this and make all of my purchased music available on my phone without requiring syncing?
    iPhone 4

    So I have been searching the iStore for Airplay and I find lots of information about what it is, but nothing about how much it costs, how/where to buy it, etc.?
    Fortunately, AirPlay does not cost anything as it is a streaming protocol used by Apple. Currently, the AirPort Express and Apple TV are AirPlay-ready. A number of other companies, like JBL, iHome, Denon and Klipsch are also rumored to be working on AirPlay versions of their products.
    Your other option would be to get an AirPort Express and connect it to your Onkyo analog or optical digital audio input and stream from iTunes that way. I currently do this with my 10+ year old Harmon Kardon HT receiver.

  • I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW

    I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW, and all I need is to find WHERE I can download it. Thanks.

    cr is installed by updating your app.  use help>update, or update manually
    pre cc updates:  http://www.adobe.com/downloads/updates/
    cc updates:  http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
    cc 2104 updates:  http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

  • Where is the plugin for isync 3.0 to my nokia n95 8gb?

    It can't be true that I can't sync my new phone with my mac? I can only find plugin for isync 2.4 on nokias site.

    Just because you can't get it to work, doesn't mean you need a different plugin for iSync 3.0. As I already said, the iSync 2.4 Plugins work fine with iSync 3.0.
    If the plugin was not compatible with iSync 3.0, you would get a different message telling you that the plugin does not work with that version of iSync.
    The message you are getting means that iSync cannot identify your phone. Either you have not installed the plugin, not set your phone up correctly, installed the wrong plugin for your phone, or your phone is identifying itself differently to what iSync expects.
    What are the EXACT steps you have taken so far? Are you trying to sync by Bluetooth or USB? How are you setting up your phone for iSync?

  • Is there a way to install the plugin for Cuevana or how do i go back to ff4?

    Hello,
    i use to have FF4 and i was able to download the plugin for Cuevana.tv but now that i have updated to FF5 the plugin it no loger compatible. Is there a way for me to force this plugin somehow or how can i go back to FF4 so that I can keep watching Cuevana.tv until they update the plugin.
    Thanks

    So that means that no even with the FF4 will i be able to watch it on my galaxy?
    Thanks for your time

  • Apple Configurator: The configuration for your iPad could not be downloaded from organisation . Invalid Profile.

    Good afternoon,
    I am really struggling with a deployment of 10 iPad Minis.
    The iPads are brand new and I have downloaded and installed Apple Configurator onto our Apple Air laptop.
    I have configured Apple Configurator in the following way:
    Under Prepared:
    Settings
    Name is ticked with 'Number sequentially starting at 1'.
    Supervision is ticked to on, Allow devices to connect to other Macs is also ticked.
    Update iOS is set to "When update is available". Erase before installing is ticked.
    Restore is set to "Don't restore backup".
    No profiles are listed in the profiles section.
    Apps
    I have copied in some appropriate apps.
    Setup
    Skip: Restore, Passcode, Siri, Touch ID, Apple Pay, App Analytics all ticked.
    I have not configured Device Enrollment.
    In "Configure Settings..." Device Enrollment is not configured.
    After preparing my iPads, they all connect and prepare correctly. When I select any iPad and unlock it, the following happens:
    Hello, slide to setup
    Select language, UK selected
    Select Your Country or Region, UK selected
    Choose a Wi-Fi Network, correct network selected and authenticated
    Location Services: Enabled
    Configuration, "<organisation> can automatically configure your iPad". Apply Configuration or Skip Configuration. Apply selected.
    Configuration, "The configuration for your iPad could not be downloaded from <organisation>. Invalid Profile.
    Apple Configurator is showing no errors, have tried Supervise>Reset, makes no difference.
    Have skipped configuration and erased iPad before trying again, same problem.
    Any suggestions would be really appreciated.

    FYI - This is an iPad user to user forum. Apple doesn't read the forum posts.
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom

  • The size of your selected options exceeds the available space

    I am trying to install a brand new full version of Adobe Creative Suite 4 Web Premium.
    I am unable to proceed, as the install options window tells me "The size of your selected options exceeds the available space" with a red exclamation point.
    It says my options require 9.6GB of space.
    I am trying to install on my D Drive, which has 1.1 TB of available space. Yes, that's right, Terrabytes.
    Help!
    System: Intel Core2 Quad Q6600 @2.4 GHz, Windows Vista Ultimate 64 bit SP1, 4 GB RAM, system drive WD Raptor (75GB) and main drive (where I am trying to install CS4) is (6) 500GB seagate SATA hard drives in a 2.5TB RAID 5 array. Motherboard is a Gigabyte GA-P35-DQ6 and video is an Nvidia GEForce 8800GT (512 RAM). RAID controller is onboard the motherboard (Intel ICH8R)

    SOLVED!
    Bob and Peter, you nailed it.
    I had inadequate room on the C drive...I was down to only 5 GB of space.
    I cleaned up the desktop (The wife thinks that is a great place to store everything) and freed up my C drive so it had just over 10 GB of free space, and the red exclamation point went away. It is now happily installing onto my D drive.
    Ian, my C drive (system) is a Western Digital Raptor...10,000 RPM. They are really small (75GB) but really fast so that windows boots up really quick. It is a performance thing. My D is a RAID array for redundancy...as I cannot afford to lose my pictures, videos, and documents, etc. - and I always keep my program installs on D so as to keep the C drive speedy and un-cluttered - plus if and when windows gets corrupted (which it does once every couple of years for some reason), I can re-do it in 5 minutes with an image using Acronis True Image.
    Thanks to all of you for your ideas, and I am glad I got it solved. If any Adobe employees read this...you can at least throw in some nice paper manuals for the software. When software is $1600.00 I'm not real concerned about saving another tree - and you shouldn't be either...I'd rather have some paper manuals for reference when I buy a full retail package. So pump up the packaging please. Thanks!!!!
    Shane

  • No stock information for your selection criteria 2lis_03_bx

    hi,
    In MCNB when trying initialize stock for 2lis_03_bx
    i am getting  an error message
    No stock information for your selection criteria
    Can you guys please help me out in this, Is there any configuration thats needs to be done because I have alreay configured all the stuff like Activation of 2LIS_03_BF datasource in LBWE and Industry sectore as SAP STANDARD CORE.
    I got stuck on this.
    regards

    HI,
    at T-code BF11, check the box " BC-BW Business Information Warehouse" and save it.
    Regards
    Sagar

Maybe you are looking for