Unsupported Operating System

Hi. I have finally moved from an iphone to a blackberry. I have a MAC with OS X 10.5.5
I have downloaded the Blackberry Desktop Software and everytime I want to download an application it comes up with the following message:
Unsupported Operating System
You are using an unsupported operating system, some functionality will be disabled.
I have tried to uninstall and reinstall and it still comes up with this error.
Please help me ..... I dearly want to use this phone.....
Thanks in advance

I've got the same issue with this, the non-availability of the older software for those of us not running the very latest Mac OS. Anybody know where you can get it from? So far I've been working around this by just connecting my BB with the USB cable or by Bluetooth and transferring files as if it were another disc connected to the computer, but I'd prefer to be able to do it more easily... I did pay for the privilege after all, come on RIM, sort it out!!!!

Similar Messages

I'm trying to connect my MacBook Pro running on OS 10.8.2 to a Linksys EA3500 router and when I go to click on the set up icon I get an "unsupported operating system". Any suggestions on what to do? The Linksys site is useless.

I'm trying to connect my MacBook Pro running on OS 10.8.2 to a Linksys EA3500 router and when I go to click on the set up icon I get an "unsupported operating system". Any suggestions on what to do? The Linksys site is useless. Do I need some kind of upgrade?

Don't use the CD software its not necessary.
Infact put it in the trash.
Your router will have an IP address in the range 192.168.1.1
Connect your router to your Mac via Ethernet cable (They usually supply one with the router and don't worry which end goes where the Mac LAN socket is bi-directional)
Also connect your router to your telephone line.
Now open your Web browser Safari . Type in the IP address above and a Javascript control panel will launch
Enter the default password and username (They are on a label on the router )
Your now have the ability to set up your router.
Your will need the password and user name supplied to you by your ISP at a minimum.
Enter these and most modern routers automatically configure the basic networking setting.
You now need to go to the security setting and set this as WPA2 Personal (NOT Enterprise) or WPA2 with AES and TKIP which ever it refers to and create a pass-phase. WRITE it down
You should be online.
Now remove the cable and connect to the Wifi and enter that passphase.

Cisco Connect won't open due to Unsupported Operating System

I have a Mac with OS X version 10.7.4, however when I try to open Cisco Connect I get an error message that says:
Unsupported operating system
The router works with these operating systems:
- Mac OS X 10.4.9 or later
- Mac OS X 10.5.8 or later
- Mac OS X 10.6.1 or later
Please visit www.apple.com to upgrade your operating system.
Anyone know what I need to do to get it to open?

I found this article, but I have device E2000, so does this mean I can't update my Cisco connect software? I just moved and my wireless isn't working. I need to get into cisco connect to set it up. Do I need to buy a new device?
Article ID: 23897
Older versions of Cisco Connect and the Network Magic add-on for Mac computers have compatibility issues with the latest release of Mac OS X (10.7 “Lion”). Only Cisco Connect versions 1.4.11222 and newer are compatible with the Lion operating system. To learn how to check your computer’s Mac OS X version, click here.
To ensure that Cisco Connect software can be installed on your Mac computer, check the table below which lists the devices that have this update.
Device
Compatibility with Mac OS X Lion
E1000
Not available
E1200
Download
E1500
Download
E1550
Download
E2000
Not available
E2100L
Not available
E2500
Download
E3000
Not available
E3200
Download
E4200
Download
EA2700
Download
EA3500
Download
EA4500
Download
X2000
Download
X3000
Download

How to install Deskjet 3055a, new router but unsupported operating system on Macbook

Hi, Please go easy with me, I really know very little about all this ! We have a Deskjet 3055A printer which has been linked wirelessly to my iPad and a MacBook without a problem until now. We have installed a new router. I am thinking that we have to amend our network in some way ? I have tried to run the HP cd on the MacBook to amend it, but all I get is the message as follows... "Unsupported operating system. The installer is not compatible with the version of the operating system on your computer. It is compatible only with 10.6 and below." The MacBook is running OS X version 10.9.5 Any help greatly appreciated - thank you ! ( Please keep it simple !! ) We 

Welcome to the community @Teekayk
I understand you are trying to install your Deskjet 3055A on your Mac, running Mavericks. The installation CD may be compatible up to 10.6, and that could be why you are seeing the error message.
This link should help you. It will show you how to install the printer on your Mac. There is no full driver and software available for the Deskjet 3055A on Mavericks, which basically means you will need to review your other options to scan on your Mac through Apple Updates, which is all included in the guide.
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
Have a great weekend, I hope the information helps you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Setup - Unsupported Operating System

I received a Linksys E1200 Wi-Fi Router for Christmas. I inserted the Setup CD into my iMac, running OS X version 10.8.2.
I clicked on setup and a window opened with the message "Unsupported operating system".
At this point I don't plan to use the Wi-Fi for the computer, but I do need to connect the ethernet cable to the router, then to my computer.
I will be using Wi-Fi for my iPad. In that case, I have no instructions on how to set up the router for my iPad. Please advise.
Will this Wi-Fi router work or will I need a router compatible with OS X version 10.8.2?

Hi, have you tried downloading it from here? Its supposed to work for the 10.8 version, though Im not sure if it will however for the 10.8.2. At either rate, you can also manually configure the router, just follow the instructions on my signature.
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

E4200 - Unsupported Operating System Mountain Lion

Just purchased the E4200 for our office to find that the most current mac operating system, Moutain Lion, is not supported by this wirelss router. Does anyone know of a work-around or solution for this problem?

When you sy unsupported, you are referring to the software that helps you setup the router right? The router will work with this operating system, you will still be able to connect wirelessly to the network using this. But for the initial setup, if you do not have another computer to use, you will have to manually configure it.
Please check the links below:
Title: Setting up a Linksys router for DSL Internet connection
Article ID: 3687
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20ee1457387f40178cd5f41d4b585db4_3687.xml&pid=80&r...
Title: Setting up a Linksys router with Cable Internet service
Article ID: 3686
http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=3686

I can't download photoshop trial: unsupported operating system

I get this message and won't let me download...
You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms.

Ah.. I am running 10.6.8
Thanks John!
2014-07-13 7:49 GMT+09:00, John Waller <[email protected]>:
John Waller created the
discussion
"i can't download photoshop trial"
To view the discussion, visit:
https://forums.adobe.com/message/6545616#6545616
>

After upgrade cannot connect to router- Cisco Connect advises "unsupported operating system"

With the upgrade I am unable to connect to my Linksys E1200 Router.

When you try to login at http://192.168.1.1, what happens? What do you see on your browser? Does it say invalid password, or does it not give you a login prompt at all? And I'm not sure if you're problem is the wireless computer or the wired one...you say you have one wired computer, then you're saying that you use the same wire with the other one, and use the term "cables" so it's confusing what you're trying to do. Do you have two wired computers, one working on the internet and the other not? Or ???
Also, you can reset the router password to factory defaults by using the reset button on the back (press it for about 30 seconds, then release). This will also set all your configuration back to factory defaults, too, so you'll have to re-enter all your settings, but it is possible that you changed the password somewhere along the way and forgot what it is.

When I try to open my Cisco Connect router it says "unsupported operating system".

I just upgraded to Maverick and now when I try to access my Cisco router it won't open and when I try to open a firmware upgrade download, it says "set up is damaged and can't be opened". My OS X is version 10.9 now. Cisco says it supports 10.5.8 or later, 10.6.1 or later, and 10.7 or later. Does this mean Cisco no longer supports my router because of the upgrade to Maverick? Shouldn't Apple have said the upgrade would affect hardware such as a router?

Select one of the problem files in the Finder and open the Info window. Do you have read & write access?

Videos dont play on my computer I have a mac osx 10.3.9 and it says unsupportive operating system i must get tiger or leopard

i have mac osx 10.3.9 and i must get tiger 10.4 or later to play videos and other things like links in my e-mail won't open, and other problems
== This happened ==
Every time Firefox opened

and ....?

Error on Media Sync 3.0 Install - Unsupported Operating System

I am having problems installing the new version of media sync on my computer running Windows XP Pro SP3 (v.3311). After it unpacks the files and begins to run the installation wizard, I receive a message that says I am trying to install it on a computer w/ a unsupported operating system. Here is what I have done to try to fix the problem:
1) I have re-downloaded the installation file from Blackberry multiple times over a span of days
2) I have tried to download an install through the check for updates feature in my current version of media sync
3) I have tried uninstalling media sync and rebooting my computer and then trying to install the new version
4) I saw in one post in another Blackberry forum that you need to be on the highest release of v. 2. I downloaded as instructed and when trying to install it I also get the unsupported operating system message
I have run out of attempts I can think of, and have searched Blackberry, Crackberry, and Google for a solution.
Has anyone figured out anything yet on this one?
P.S. -- I know that some have successfully installed the new Media Sync on their computers running XP w/ SP3. So there is not need to reply letting me know you did not have a problem installing it.
Thanks in advance for any help that you can provide.

Your Microsoft Windows Xp SP3 version value in the registry may be inconsistent or missing ...
- Please navigate to the following tree in the registry editor and paste the value for "CSDVersion"
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
The regkey can be accessed by searching for 'CSDVersion' in the registry editor or you could follow the steps below.
(1) Click 'Start' > choose 'Run'
(2) type 'regedit' in the run window and click 'ok'. This will open the registry editor
(3) Navigate the tree to 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion'
(4) look in the left side pane and locate 'CSDVersion' and its value.
And how did your upgrade to SP3 happen? Did it come preinstalled on your machine or have you upgraded it by downloading upgrades from the internet.
~S~

How do I disactivate the operating system on my macbook that was stolen from me?

So in early September someone who I know broke into my apartment and stole my computer, I called the police and filed a report. I have some very snesitive documents on the computer that I would prefer no one to get their hands on. I was able to find the operating system disk I had purchsed to update the operating system a few years ago so I have all of the information associated with the OS. I do not know the IP address of the computer or exactly where it is (obviously or I would have it back). I want to basically turn the OS off so my files on the computer cannot be opened or used. Is there any way to disactivate the OS remotely like you can with Windows (if you use the product key on another PC it deactivates the previous version). I don't know if it matters but it was a late 2006 macbook (black) model 13" screen.

What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T, Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. Lost or Stolen iPhone? Here’s What to do
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on MobileMe
3. OS X Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
1. VUWER 1.5.4
2. Sneaky ******* 0.2.0
3. Undercover 4.7
4. LoJack for Laptops Premium Mac
5. STEM 2.1
6. MacPhoneHome 3.5

8.1.7 Installation Problem on Pentium IV Sony VAIO PCV-RX651 with XP Operating System

Have problem installing Oracle 8i Enterprise Edition on a SONY VAIO with XP Personal Edition. The "Explore CD" and "Browse Documents" buttons of the Oracle Universal Installer/Autorun responded but the "Install/DeInstall Products" button did not. Oracle 8i DB from the same CD was installed and ran just fine on a Pentium III Toshiba laptop with Win2000 ?! Please help.
Thanks.
CNguyen
[email protected]

================================================================
Doc ID:
Note:131299.1
Subject:
Oracle Installer 8.1.X Hangs on Machines with Pentium 4
Processors
Type:
ALERT
Status:
PUBLISHED
Content
Type:
TEXT/PLAIN
Creation
Date:
02-JAN-2001
Last
Revision Date:
18-APR-2001
This alert was modified 16-January-2001 by specifying specific
Oracle Universal
Installer Versions in the the Versions Affected section.
Oracle Universal Installer (OUI) for 8.1.x Hangs on Machines
with Pentium 4
Processors
~~~~~~~~~~~~~~~~~~
Versions Affected
~~~~~~~~~~~~~~~~~
Oracle 8.1.5
============
Oracle Universal Installer 1.6.0.9.0
Oracle 8.1.6
=============
Oracle Universal Installer 1.7.0.19.0
Oracle 8.1.7
==============
Oracle Universal Installer 1.7.1.9.0
Platforms Affected
~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000
and NetWare platforms are confirmed to be affected.
Description
~~~~~~~~~~~
When installing Oracle Products with the Oracle Universal
Installer (8.1.x)
on machines that use the Sun JRE and Symmantec JIT, the
installer hangs.
Specifically for the Windows platform, the following version
of the Symmantec
JIT or earlier will encounter the failure:
Symantec Java! JustInTime Compiler Version 3.10.107 for JDK
1.2.
Details regarding this issue can be found at:
http://developer.intel.com/design/processor/future/manuals/knowni ssue.htm
How to determine if you have Symmantec Java for JDK 1.2:
1. Select the file "symcjit.dll" and right click on it.
2. Select Properties, then the Version tab.
3. Under Microsoft Windows*, the properties of the DLL are:
"Symantec Java! JustInTime Compiler Version 3.10.107 for
JDK 1.2 Copyright (C)
1996-99 Symantec Corporation Dynamic Link Library file".
DLLs older than this will also not work. "
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000 and NetWare platforms are confirmed to be
affected.
Possible Symptoms
~~~~~~~~~~~~~~~~~
The failure typically is that the affected application simply
terminates.
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the
post-install
configuration tools will also be affected. Running these
tools with "-nojit"
specified will avoid the hang, but it is not simple to specify
"-nojit" for
some of the products.
The following workaround works for the Windows operating
system:
a. Copy only the install directory from the CD to the hard
disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications
(Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD
instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles
\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataF
iles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard
drive (i.e.
e:\temp\install\win32\setup.exe). This will use the
modified
oraparam.ini and pick up the information from the CD since
the absolute
locations are specified.
Choose a Custom install and choose not to create a database
during the
install. This way, the Database Configuration Assistant will
not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and
there is no way
to suppress it. You will need to kill the Net8 Configuration
Assistant if it
hangs due to the bug. The installation still will have been
successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8
Configuration
Assistant" and click "Stop". If that does not work, look for
the most recent
JRE process using the Task Manager, and kill it manually.
NOTE: the OUI
itself will also have a jre process. Be sure to kill the one
with the most
recent date, which should be the jre process being used for
Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through
the installation
to the "End of Installation" screen, you should modify the
configuration tools
to use "-nojit", then call the appropriate tools from the
Start Menu.
Once installation is complete, each of the following files in
the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown
below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit
-classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from
the Start Menu.
Patches
~~~~~~~
Currently there is not a patched installer available to deal
with this
problem, the workaround listed above must be used.
References
~~~~~~~~~~
[BUG:1507768] INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4
(IV) PROCESSORS
[BUG:1507946] INSTALLER FAILS WHEN RUNNING ON NEW INTEL
PENTIUM 4 (IV) PROCESSORS
@[BUG:1518935] SYMCJIT.DLL DOESN'T WORK WITH THE NEW P4
PROCESSORS
Oracle
Support Services.
Copyright (c) 1995,2000 Oracle Corporation. All Rights
Reserved. Legal Notices and Terms of Use.
================================================================
The solution of making a local copy of the installation CD on
the hard disk and renameing symcjit.dll to symcjit.old does
work to allow installation of Oracle Client 8.1.7 on a Pentium 4
This function is useful and you can find two file to rename
===============================================================
Windows ME
Solution to the installation of Oraclei8.1.7 PE in Windows Millennium
Oracle does not support installing version 8.1.7 PE into
Windows Millennium.
As an unsupported workaround, you may add the following line
to the [compatibility95] section of win.ini prior to
installation:
Jrew=0x00080000
After setup is complete, Oracle will recommend a reboot.
There is one additional step necessary prior to reboot;
Oracle may add a non-standard path statement to the
autoexec.bat file. Please modify this SET PATH
statement to use short-filenames if you find a quoted
LFN string represented as part of the path. You can
confirm that the path was merged successfully into the
registry after reboot by examining the PATH variable
in the registry at
HKLM\System\CurrentControlSet\Control\SessionManager\Environment
Symptoms of a missing Oracle path statement in the registry are that Net8 Easy Config will not launch.
Please note that Oracle does not support the use of this
product in Windows ME, but have authorized these workarounds
for testing purposes only.
===============================================================
Windows XP Home Edition
Oracle 8i is not certified on windows XP. Even if yes, it must be Windows XP Professional.
You can install Oracle8i on windows XP Home Edition, try like this:
1 - Copy your Oracle CD into hard disk in your
machine. For example Copy from oracle8i CD into C:\Oracle\ ...
2 - Search the two files named Symcjit.dll on the D drive (where you have copied Oracle8i. You can found them in (example):
C:\Oracle\stage\Components\oracle.swd.jre\1.1.7.30\1
\DataFiles\Expanded\jre\win32\bin\symcjit.dll
3 - Rename this file (Example): symcjit_back.dll (make sure to find two files and rename them)
4 - Execute the Oracle setup.exe from C:\Oracle\setup.exe
===============================================================
When Oracle 8i dies on the install or the installer hangs, here is the fix for this, make sure that you have Service Pack 2 installed.
1. \JRE\1.3.1\ From Sun. (You can download java program at http://java.sun.com/products/jdk/1.1/jre/download-jre-windows.html)
2. Install the java file.
There is also a problem in the installation disk.
3. Make a copy of the Oracle 8i disk on the local hard disk.
4. Do a search for the two files called symcjit.dll and rename them for example: symcjit.old.
5. Install Oracle from the win32 directory.
================================================================
PLEASE NOTE THAT ORACLE DOESN'T SUPPORT THE USE OF THOSE PRODUCTS IN WINDOWS ME, BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY

I have a MacBook Pro and a Canon MX452. I updated the operating system on my MacBook to Yosemite 10.

I own a Canon MX452 and a MacBook Pro (2010 model). This week I updated the MacBook operating system to Yosemite 10.10.3. Afterwards I found the printer / scanner functions would not work. I re-loaded the CD from the printer and was also prompted to download more currrent drivers from the Canon website, from which I chose the ICA Driver V4.0.0 and the Canon IJ Network Tool V4.5.0 (not sure if these were the right ones or not).
I managed to only get the printer working when using the USB cable to the printer. I could not get the printer and scanner working wirelessly. The printer blue light shows it is connected to my network ok. I also noted my iPad and iPhone can no longer "see" the printer either.
I have deleted and re-loaded the Canon software several times. I have followed Canon instructions to:
-Connect the MacBook to the router with an ethernet cable and go through the instructions to "connect" the Canon MX452. But afterwards, the MacBook says the Canon MX452 is "off line" and I can only make it work with the USB connection.
Any guidance would me most appreciated to:
-get the printer and scanner working wirelessly
-getting the Air-Print feature working with the iPad and iPhone
Thanks
Stephen
Solved!
Go to Solution.

Hi John. Thanks for that input. At Step 6, after clicking "Next" I get a window telling me my OS version is unsupported and the installation may not complete. I am prompted to go to Canon's web site to "Check Latest Info".
I've had this window on previous attempts and from Canon's web site I downloaded two drivers as follows
- ICA Driver V4.0.0
- Canon IJ Network Tool V4.5.0
I'm not sure if these are the correct / complete drivers I need for this install or not.
I continue to follow all the steps. At step 9 I click "Wireless Set Up using USB" amd get a License Agreement (a little different than instructions)
I click "Agree" and it goes to a Setup window with two progress bars showing the installation. I've not been prompted to connect the USB?
After the Setup window is done, I am then prompted to connect the printer via USB. I connect the printer and click on "Redetect". It is not detected.
I then try following the Canon on screen instructions for connecting to the wireless LAN amd enter the password. It searches and indicates "Connecting" on the window, but it never connects and the blue light just blinks
So, at this point I am stuck??
Thanks
Stephen

What company can retrieve photos from a micro sd card? Another casualty of SD Card blank or has unsupported file system

I have a Droid X with a sandisk 16gb micro sdhc class 4 installed. This card has been in use for about a year and wasnt even half full. I was playing music on thanksgiving and all of a sudden the music stopped. I thought hmm, It must be doing one of its many reboots. It wasnt shut off but was on my home screen and the music player had closed. I went to my music and the songs were still listed. I tried to play one and got the error message that i cannot play this file. I tried again and the songs disappeared and up came "SD Card blank or has unsupported file system" on the top bar. I tried to view files on the card on my phone and on my computer by using an sd adapter with no luck. I popped another card into my phone and it worked with no error message and i could mount and unmount the card and view the picture I took when viewing the new card on my computer. I have a 9 year old daughter who suffers from multiple chronic illnesses and have probably 200 photos on my card of her including an extensive surgery and recovery earlier this year. If a professional can retrieve my photos, I would like to know more. Im coming up on my contracts end and this has me ready to zip up a life vest and get on another boat altogether. I have seen hundreds post about this on boards but I hope this can be resolved. Thanks in advance.

Hi Matt73,
I use my phone to store all my precious moments too and I can just imagine how frustrating it must be to have memory card issues like the ones outlined in your post. I see that you have tried different things to retrieve your files from your memory card to no available. It appears that your SD memory card somehow became corrupted and most likely the data in it is now lost (sorry). While not a common issue, there is always a possibility for memory cards and any other memory device to fail. SanDisk Memory cards carry 5 year warranty, to get a replacement please contact SanDisk at 866-726-3475. Their hours of operation are 8:00 a.m. - 7:00 p.m. PT Monday to Friday or by email at [email protected] at your convenience.
I recommend backing up your media (specially pictures) on a regular basis to your computer or to an online service to protect those special memories, I personally have my phone setup to automatically save the pictures I take to my Google account and even if lost my phone I have a copy of all my pictures online. There are several website that allow you to sync your phone to upload pictures automatically. Please consider a similar option going forward.
On a personal note, I hope that your little girl's health improves that all those chronic illnesses are kept under control by your physician; I have 2 kids and I Know what is like when they don't feel well. Have a great day!
AntonioC_VZWSupport
Follow us on Twitter at www.twitter.com/VZWSupport

Unsupported Operating System

Similar Messages

Maybe you are looking for