Unsure of which software to use - any help appreciated!

Hi,
I have been building an short intro film for a presentation, which consists of type coming up on screen, followed by photo's and each item then animating in size and position to form a map of the UK.
I've been building this in Motion, but have since realised the maximum length of the project is only about 500 frames? Am I using the wrong software?! I need the whole thing to run for around 2 mins in total.
Any help hugely appreciated.
Thanks.

If Motion is working for you can stick with it, you just need to change the project length. You can do this in the Project Properties (command-J) or click the arrow to the right of the timecode and select Show project Duration. If you double click the timecode you can change the length of the project. I'd just make sure to set the time to show "Current Time" to make sure you don't accidentally change the length.

Similar Messages

I somehow installed a version of Firefox which won't work on my "old" iMac G5 (10.5.8) so I trashed the program and now I can't get it out of my trash bin... Any help appreciated because now I can't empty my trash at all! Thanks.

I somehow installed a version of Firefox which won't work on my "old" iMac G5 (10.5.8) so I trashed the program and now I can't get it out of my trash bin... Any help appreciated because now I can't empty my trash at all! Thanks!!

You must purchase a new QT key for each computer.
Since you have a new iMac, you are entitled to 90 days of FREE phone tech support from Apple and you can use the Chat with a Support Agent. The online chat support _*is available 24 hours a day, 7 days a week.*_
If you've purchased an AppleCare Protection Plan, you're eligible for the duration of that agreement.

Recently updated the the apple tv remote app for my iPhone4. Now can no longer turn on the apple tv "box" on/off using iPhone app. Only thing that shows on iP screen is music library. Home Sharing is on. Any help appreciated.

Recently updated the the apple tv remote app for my iPhone4. Now can no longer turn on the apple tv "box" on/off using iPhone app as I used to do before the update. Only thing that shows on iPhone screen is music library. Home Sharing is on. Any help appreciated. Sorry if this is not exactly the right place to post this!

One clue: I have found a reliable way to solve the problem when it happens.
In my network, I have the main Airport Extreme (Gen 1) which is connected to my router, which distributes IP addresses to my internal subnet. The other two AEs (one Gen 4, one Gen 5) are set to extend the network.
When I get this problem with an AppleTV 2 that can "see" my library, but when I try to open it, it says it couldn't find the library, it seems to have to do with a change in which Airport Extreme it's talking to.
If I restart the main Airport Extreme from the Airport Utility, effectively restarting the entire wireless network, then when the network resumes, every AppleTV 2 is happy again.
Unfortuntely, the problem does seem to recur - but I'm wondering if it's because temporary interference leads an AppleTV 2 to try to connect to a different AE, and somehow that's mucking with the Home Sharing. Remember, internet access (Trailers, Store, Netflix) have no issues. Purely Home Sharing.
Adam

I have attempted to upgrade os4 to os7. icloud has taken an old expiered email address for which i do not know the password. It will not recognise my current email and password with itunes. Any help appreciated

I have attempted to upgrade os4 to os7. At the end, it threw an error that i had to turn off "Find my iphone" on my phone, which seems to be impossible at that stage as i could not access beyond the upgrade screen.
I thin chose to set up as new iphone, but icloud has taken an old expired email address for which i do not know the password. icloud will not recognise my current itunes email and password, so i now have os7 but am unable to restore from my itunes back up.
Desperately need help please... Any help appreciated
Thankyou

If you don't know your password, don't know your security questions and don't have a rescue address or don't receive a reset email, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

HT1320 I have a new IPod Touch 5G, 32 gb and suddenly it will not turn on, and will not restore using UTunes. Any help appreciated.

I have tried many times to restore my new IPod Touch 5G in I Tunes and it will not allow me to do it. My Ipod will not turn on at all even when on a fresh charge. Only displays the arrow leading up to ITunes logo. I have tried the method of holding the home button and on button and this does not work. Any help appreciated.
My I Pod was working fine until the day I updated the software to 6.0.1.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Does anyone know if there is any difference at all in the display between the 4 and the 4s. I use my 4 with no problems but have issues with the 5 - makes me feel ill. Any help appreciated before I make an expensive mistake

Can anyone tell me if there is any difference at all in the display between the 4 and 4s. It appears they are the same from the specs but I dont want to make an expensive mistake. I can use the 4 with no problems but the 5 makes me feel ill and I am hoping I can upgrade to a 4s with no issues. Any help appreciated.

In a technical sense, the differences between the displays on the iPhone 4 vs 4s are vast. I'm mean, they are both attached to 70 - 90% of the internal components and far from interchangeable. There are no differences however, that are noticeable by the user.

I am at the most current version of itunes, but when i try to burn a cd i get an error stating disc burner or software not found - any help?

I am at the most current version of itunes, but when i try to burn a cd i get an error stating disc burner or software not found - any help?

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

I'm trying to reset my iPhone 4S but I have no internet as my wifi has broken and I have no data left, I have tried connecting to a computer which did not work any help would be grateful thanks

I'm trying to reset my iPhone 4S but I have no internet as my wifi has broken and I have no data left, I have tried connecting to a computer which did not work any help would be grateful thanks

A reset has nothing to do with Internet access or data access.
A reset is simply pressing and holding the home and power buttons until the white Apple logo appears.
What are you really trying to do?

HT4623 "Software update" (words)don't appear when I press settings/general.should appear below "about"on my iPad 2 version4.3.5(8l.1) tenable me to update to ios6 any help appreciated

In "settings/general" the words SOFTWARE UPDATE don,t appear below ABOUT or anywhere under GENERAL to enable me to update to ios6 . Any help appreciated.

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

HT1212 I am unable to get our of a continuous cycle when trying to update or restore my iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.

When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
Here's the cycle:
I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
Click Restore
Extracting software…
Preparing iPad for restore
Waiting for iPad…
Verifying iPad restore with Apple…
(empty bar under the Apple logo…does not show any activity)
“The iPad “iPad” could not be restored. An unknown error occurred (9).”
Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
I swapped out the USB cable to a new cable and get the same results.
I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
Any advice would be appreciated.
Thanks!

Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

TS1717 Trying to download iTunes onto PC installed with windows vista. Download keeps getting to 99% with 1 second remaining and then freezes / does nothing? Any help appreciated.

Trying to download itunes onto PC installed with windows vista. Download keeps getting to 99% with 1 second remaining and then freezes / does nothing? Any help appreciated.

I solved the problem! The updates orignally were downloaded to the C: drive of the server. I've since moved them to the E: drive and for some reason the Content folder in IIS didn't change the file path to the new WSUScontent folder.
The root cause for this was failing to use the UTILITY designed for this very purpose.
I edited the virtual directory settings in IIS and was able to put the correct path in.
You still need to use the UTILITY.. to fix all the other stuff you're still missing.
In the %ProgramFiles%\Update Services\Tools folder...
WSUSUTIL MOVECONTENT E:\WSUS E:\WSUS\MoveContent.LOG -SKIPCOPY
This problem was caused by moving the WSUS updates to a different local drive.
No. This problem was caused by IMPROPERLY moving the WSUS updates to a different local drive.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

TS3938 Hi, I have a sign being advised Power PC Applications no longer supported when I try to go into Microsoft Word, Excel, Entourage & MSN Messenger, hoe do I resolve this? Any help appreciated.

Hi, I have a sign being advised Power PC Applications no longer supported when I try to go into Microsoft Word, Excel, Entourage & MSN Messenger, hoe do I resolve this? Any help appreciated Sorry, this is for a Mac Air

Most versions of Office 2008 use an Universal installer. A few have one which is PowerPC-only.
In any case, Mac OS X Server 10.6 can be run in emulation, and Rosetta applications can be run in it. Saying that PowerPC-only applications won't run in Mac OS X 10.7 is correct. Saying that they won't run on a Mac which shipped with Mac OS X 10.7 is not.
(66375)

Urgent help needed.....any help appreciated....

q, Design and implement a java class called statistics that computes the mean, median, standard deviation. Design and implement a java application called statisticsDriver that generates a list of 50 integers (generated randomly) and prints the statistical measures which are calculated using the Statistis Class. Assume there will be no more then 50 input values. Compute all statical values as floating values.
The above was the question, and below is what i have done so far for the mean part, but it seems to have errors, any help???
p.s I am also confused what it means by driver class, and do i have to do individual classes for the different statistical measures....please helppppp !!!!!!!!!!, any help would be appreciated...thanks.
The class say Mean contains the following method:
public static double mean(double[] data)
double sum=0.0;
for (int index=0; index sum=sum+data[index];
sum=sum/data.length;
return sum;
The driver for this class:
public static void main(java.lang.String[] args) {
double[] myData={2,5,4,6,7,13};
System.out.println("The mean of myData");
System.out.println(Mena.mean(myData));

This is my method to work out the mean,median and mode of a set of numbers.
But what i need to do is find the mean, median and mode from a driver class, which generates a list of random numbers, no more then 50. I don't know where to fit this in my method...please help!!!!!!
main:
public static void main(String[] args) {
int[] mainArray = {2,3,6,6,6};
//outputArray( "Original Array: ",mainArray );
System.out.println("average is " + mean( mainArray ));
System.out.println("median is " + median( mainArray ));
System.out.println("mode is " + mode( mainArray ));
//mean
public static double mean(int[] mainArray) {
int sum = 0;
for (int i = 0; i < mainArray.length; i++) {
sum = sum + mainArray;
double average = sum / mainArray.length;
return average;
//median
public static int median(int[] mainArray) {
//double sortList = sort(mainArray);
final int EVEN_NUMBER_OF_ELEMENTS = 0;
int result = mainArray.length % 2;
int median = 0;
// Definition: Median is the Middle number in an odd number of entries array
// Median is the avg of the two number in the center of an even number array
if (result == EVEN_NUMBER_OF_ELEMENTS) {
int rightNumber = mainArray.length / 2;
int leftNumber = rightNumber - 1;
median = (mainArray[rightNumber] + mainArray[leftNumber]) / 2;
else { // Odd number of items, choose the center one
int rightNumber = mainArray.length / 2;
median = mainArray[rightNumber];
return median;
//mode
public static double mode(int[] mainArray)
int mode = 0;
int elements = 0;
int tempMode = mainArray[0];
int temp = 1;
int x;
for( x = 1; x < mainArray.length; x++)
if(mainArray[x-1] == mainArray[x])
temp++;
else
if(temp > elements)
tempMode = mainArray[x-1];
elements = temp;
temp = 1;
else
temp = 1;
if (temp> elements)
tempMode = mainArray[x-1];
mode = tempMode;
return mode;
any help appreciated..

Any help appreciated - iTune compression problems

Hi there,
Just bought a second hand iPhone 3g yesterday that has to last me out 5 months before my contract is up and I can hopefully get a 5 if it's out (touchwood).
Transferred some music from iTunes to my iPhone and on the phone speakers it sounds fine, however when I put my headphones into the jack it's incredibly distorted and sounds like it's suffered far too much compression.
I'm guessing this is possibly a headphone jack related problem as opposed to a compression issue? Tried converting files to AAC but made no difference
Any help appreciated!
Thanks
Dan

FYI - the iPhone includes a single external speaker. The opposite grill that appears the same is a microphone.
If this were a compression or format issue, the same would occur when playing the music via the speaker. Using earbuds has no affect on the compression or format. More than likely this is a headphone jack related problem or there could be a problem with the earbuds being used.

Any help appreciated - - on barefoot ski image optimization

Any help appreciated.
Working with Photoshop 7.0 trying to color correct and optimize an image of my son barefooting to prepare for giant vinyl print to create a stand up cut-out on a foam board.
I will attach 2 downsized images for comparison.
As you can see one image has nice smile but no sunlight and other image has great sunlight but no smile.
I need to optimize for CMYK printing the smiling image. I know a bit about levels, but don't know what to change for midtones, highlights, etc. to try and correct this smiling image as best possible.
Unfortunately I did not set up the Canon EOS Xsi camera to save RAW images at 17 megs and the boat owner is not wanting to go out again for another photo session. Original image is 4.5 megs jpg which I crop image, adjust histogram by "sliding in the sides", convert to CMYK, sharpen unmask at 98%, increase brightness with middle slider in histogram, expand size up to 72 inches tall by 54 inches wide and also set to 150 pixels per inch (may try 300), save as LZW TIFF.
After that image is like 400 megs, then import into illustrator CS and tile out just the face of a 72 inch X 54 inch and it's amazing pretty clear for 100:1 file size increase (13 X 9 inch sheet).
I have access to CS4 on Mac only - - don't know if CS4 Mac file will have any big advantages over my 7.0 in Windows . . .

Hmmmm, wonder if anybody ever created a plug in for photoshop that allowed you to add more lighting to an image, as in light coming from behind the photographer - - like sunlight effects ?

Unsure of which software to use - any help appreciated!

Similar Messages

Maybe you are looking for