Unsyncing phone from one comp using a different comp
My macbook was recently stolen and i had my iphone synced to it. I do not wish to sync my phone to another computer, but is there a way to get it unsynced from the stolen macbook without deleting all 3000 of my songs???
No there isn't.
The sync process for iTunes content is a one way transfer process only - from your computer to your iPhone, and an iPhone can be synced with an iTunes library on a single computer only. When syncing iTunes content with an iTunes library on another computer, all iTunes content on the iPhone will be erased first. The same applies to photos transferred from your computer to your iPhone via the iTunes sync process.
I assume you don't maintain a backup for your computer that was stolen or if you do, your backup doesn't include your iTunes library?
iTunes includes an option to transfer iTunes content that was purchased from the iTunes store from an iPod or iPhone, but this is for content that was purchased from the iTunes store only. You need to authorize the computer that you plan on syncing your iPhone with your iTunes account with iTunes first. With your iPhone connected and without syncing, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPhone.
If most or a good portion of your iTunes library on your stolen MacBook was imported into your iTunes library from another source - such as from music CDs, there are some 3rd party utilities that provide for this and the same for transferring photos from your iPhone that were transferred to your iPhone from a computer. Such utilities are not supported by Apple and in regards to these photos, the original resolution of the photos will be lost in the process. Photos transferred from your computer to your iPhone via the iTunes sync process are optimized for viewing on your iPhone as part of the sync process, so the original resolution of these photos is changed/reduced.
In regards to contact info and calendar events, an iPhone can be synced with the supported applications on multiple computers. If you will be syncing contact info and calendar events with the Address Book and iCal on another Mac and both don't include any data, before syncing this data enter one contact in the Address Book and one calendar event in iCal on the Mac. Make these up if needed, which can be deleted later. This will provide a merge prompt when syncing this data the first time, which you want to select. This will transfer all contact info and calendar events on your iPhone to the Address Book and iCal on the new or different Mac. After the initial merge, contact info and calendar events will be kept synchronized with following syncs.
Similar Messages
-
i have switched the sim card from one iphone to a different one, and i added my music from my old phone to the used one, now the old music on the used phone won't delete. im really frustrated and annoyed please help
Do you just want to delete the music or wipe the whole phone since you've switched to the other one?
If you plug the old iPhone into your computer you can remove stuff via iTunes or remove stuff directly from the iPhone too. -
can i buy i phone from US and use it in India or different part of the world after unlocking it? if yes, than will apple unlock it or need to do it by myself?
There are no officially unlocked iPhone 5's available, in the US, at the present time. No announcement, as to availability has been made. The only unlocked iPhone, available now, is the iPhone 4 or 4S. Either of these versions will work, but will have no warranty or support in India. They can only be purchased directly from Apple, no where else.
-
I have 2 Samsung S5 phones. One has used way over the limit for no apparent reason. I have WiFi at home. What could be causing this problem?
Hello KF2PX
I'm sorry to hear your having issues with your S5. I would be happy to look into this with you. Are there different apps on both devices? Do either device auto play videos when opening apps? For example Facebook. Here's a great link to see what's using the data: http://www.verizonwireless.com/support/data-utilization-faqs/
JoeL_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
How do i switch a facetime email address from one ipod to a different one. thanks
how do i switch a facetime email address from one ipod to a different one. when i try to use the address on the new ipod it says it is already to use
Have you looked here:
iOS: FaceTime is 'Unable to verify email because it is in use' -
How to move phones from one CUCM server to another?
How easy is it to migrate IP phones from one CUCM server to another?
The situation is this:
A vessel currently sitting in dry dock has 14 IP phones onboard which currently register with a CUCM server half way round the world (literally). As you can imagine there is quite a fair amount of delay for the signal processing, not to mention the connectivity being over a VSAT link. This being a temporary solution.
A CUCM server has been configured and installed on the vessel with all the relevant partitions, route patterns, trunks etc. The phones have also been added to the new server ready for migration. The only real thing that will be different when the phones are migrated is the Directory Number on each phone. Both CUCM servers are running software version 7.1.3
The phones currently pick up their local IP addresses via a local DHCP server which assigns 150 TFTP Server IP Address for the remote CUCM server. Is changing the the TFTP Server IP address to the local CUCM server enough to have the phones register with the local server.
This is not something I've tried before so would appreciate feedback or any comments that may indicate anything I missed along the way.
Thanks,
RicHi Ricardo,
On the DHCP scope created for the voice vlan change the Option 150(TFTP Server IP address) to the new CUCM and remove/delete the remote CUCM IP address just to ensure that phones once after registering to the new CUCM will not fetch any config from the remote CUCM as the DN's of the phones are changed on the new CUCM please ensure this.
Apart from this i dont see any challenges as the firmware of the IP Phones will also remain same as CUCM version is same.
Hope that helps.
Regards
Najaf -
Want to transfer data via idocs from one R/3 to different R/3
Hi!!
May i hav nay step by step pdf which gives the complete flow of how to transfer idocs from from one R/3 to different R/3.
Though i have the basics steps but some where I m stuck.
Also I have two doubts::
1.Is thr Any relation bw port name and Logical System name?Can they be same.??I hav kept Logical System name as SAPE60 AND PORT name also as SAPE60(in e60) and SAPEI6(in ei6) servers respectively.
2.Should the Logical System names be maintained same in both the servers??
Kindly respond .
Helpful answers will be rewarded points!!!Hi Deepika ,
See the Example scenarios
MASTER DATA TRANSFERMATION BETWEEN 2 DIFF CLIENTS
For this scenario Client 800 is the Sender and 810 is the receiving system
1. Creating Logical Systems
o Login using 800 client
o Go to T. Code SALE
o Expand Sending and Receiving Systems
o Expand Logical Systems
o Click on Define Logical System
o Click on New Entries
o Create STUD_S, STUD_R Logical Systems
o Save and come back
o Assign the STUD_S Logical System to client 800
o Assign the STUD_R Logical System to client 810
2. Creating the RFCs
o Go to T. Code SM59
o Expand R/3 Connections
o Enter RFC Name as STUD_S
o Connection Type as 3
o Language as EN
o Client as 800
o User as SAPUSER
o PWD as abap
o Target host as sap
o Click on Remote logon button to test the RFC
o Enter RFC Name as STUD_R
o Connection Type as 3
o Language as EN
o Client as 800
o User as SATISH
o PWD as abap
o Target host as sap
o Click on Remote logon button to test the RFC
3. Creating the Message Type
o Go to T. Code WE81
o Click on change, continue
o Click on New Entries button
o Give message type as ZBAPI_STUD_MAS and description
o Save and back
4. Creating the Segment
o Go to T. Code WE31
o Give segment name as ZBAPI_STUD_SEG
o Enter Short Text
o Enter the Field Name and Data Element in the text boxes
o Save, continue,
o Click on Edit -> Set Release.
5. Creating the Basic IDOC Object
o Go to T. code WE30
o Give obj. name as ZBAPI_STUD_IDOC
o Click on create
o Select create new radio button, give description and continue
o Select the IDOC obj name and click on create button
o Enter the segment name which is create earlier
o Select the check box if you want to make the segment mandatory
o Enter 1 in minimum number 99999 in maximum number, continue
o Save and back
o Click on Edit -> Set Release
6. Creating Customer Distribution Model
o Go to T. Code BD64
o Click on change and Create model view button
o Enter the short text and Technical name as ZSTUDENT
o Select the model and click on Add Message Type Button
o Give the Sender as STUD_S,
o Receiver as STUD_R,
o Message Type as ZBAPI_STUD_MAS
o Select the model view & click on Environment -> Generate Partner Profiles
o Select Transfer IDOC Immediately and Trigger Immediately radio buttons
o Click on Execute
o You should get a list in green color which means it executed successfully.
o Back to main screen, select the model view
o Click Edit->Model view->Distribute
o Click on continue
o You should get a list saying model view is distributed successfully.
7. Checking the Port
o Go to T. Code WE21
o Expand Transactional RFC
o Find the port from the list which is created using BD64 for STUD_R (Receiving system) RFC Destination.
8. Checking the Partner Profiles.
o Go to T. Code WE20
o Expand Partner Type LS
o Select the Partner profile STUD_R
o Double click on Message Type ZBAPI_STUD_MAS in Outbound parmtrs.
o Check Receiver Port is assigned correctly
o Check the Basic type as your Basic IDOC object.
9. Assigning the Message Type to Basic IDOC Object
o Go to T. Code WE82
o Click on Change & continue, New Entries button
o Give the Message type as ZBAPI_STUD_MAS
o Give Basic Type as ZBAPI_STUD_IDOC
o Release as 46C
o Save and back
10. Creating Inbound Function Module (Posting Program)
o Go to T. Code SE37
o Create a function Module IDOC_INPUT_ZBAPI_STUD_MAS
o Set the Processing type as Remote Enabled Module and mode as start immed, in Attributes Tab.
o Import Parameters
INPUT_METHOD LIKE BDWFAP_PAR-INPUTMETHD
MASS_PROCESSING LIKE BDWFAP_PAR-MASS_PROC
NO_APPLICATION_LOG LIKE SY-DATAR
MASSSAVEINFOS LIKE MASSSAVINF
o Export Parameters
WORKFLOW_RESULT LIKE BDWF_PARAM-RESULT
APPLICATION_VARIABLE LIKE BDWF_PARAM-APPL_VAR
IN_UPDATE_TASK LIKE BDWFAP_PAR-UPDATETASK
CALL_TRANSACTION_DONE LIKE BDWFAP_PAR-CALLTRANS
o Tables
IDOC_CONTRL LIKE EDIDC
IDOC_DATA LIKE EDIDD
IDOC_STATUS LIKE BDIDOCSTAT
RETURN_VARIABLES LIKE BDWFRETVAR
SERIALIZATION_INFO LIKE BDI_SER
o Exceptions
WRONG_FUNCTION_CALLED
o Source Code
DATA: FIRST_TRANC LIKE MARA_UEB-TRANC,
ZBAPI_STUD_SEG like zbapi_stud.
DATA: ZBAPI_STUD LIKE ZBAPI_STUD.
DATA: I_ZBAPI_STUD LIKE ZBAPI_STUD.
DATA: C_TRUE VALUE 'X'.
DATA: C_FALSE VALUE ' '.
DATA: BEGIN OF T_IDOC_ROLLNO OCCURS 0,
DOCNUM LIKE EDIDC-DOCNUM,
ROLLNO LIKE ZBAPI_STUD-ROLLNO,
END OF T_IDOC_ROLLNO.
DEFINE APPEND_RESFIELDS.
PERFORM APPEND_RES_FIELDS TABLES T_MFIELDRES
T_RES_FIELDS
USING &1
COUNTER-D_IND.
END-OF-DEFINITION.
DATA: I_MARA_UEB LIKE MARA_UEB.
DATA: I_ZSTUD_UEB LIKE ZBAPI_STUD.
DATA: I_MAKT_UEB LIKE MAKT_UEB.
DATA: I_MARC_UEB LIKE MARC_UEB.
DATA: I_MARD_UEB LIKE MARD_UEB.
DATA: I_MFHM_UEB LIKE MFHM_UEB.
DATA: I_MARM_UEB LIKE MARM_UEB.
DATA: I_MEAN_UEB LIKE MEA1_UEB.
DATA: I_MBEW_UEB LIKE MBEW_UEB.
DATA: I_STEU_UEB LIKE STEU_UEB.
DATA: I_STEUMM_UEB LIKE STEUMM_UEB.
DATA: I_MLGN_UEB LIKE MLGN_UEB.
DATA: I_MLGT_UEB LIKE MLGT_UEB. " //br010797 neu zu 4.0
DATA: I_MPGD_UEB LIKE MPGD_UEB.
DATA: I_MPOP_UEB LIKE MPOP_UEB.
DATA: I_MVEG_UEB LIKE MVEG_UEB.
DATA: I_MVEU_UEB LIKE MVEU_UEB.
DATA: I_MVKE_UEB LIKE MVKE_UEB.
DATA: I_MPRW_UEB LIKE MPRW_UEB.
DATA: I_LTX1_UEB LIKE LTX1_UEB.
DATA: HELP_MARC_UEB LIKE MARC_UEB.
DATA: T_MARA_UEB LIKE MARA_UEB OCCURS 0.
DATA: T_MAKT_UEB LIKE MAKT_UEB OCCURS 0.
DATA: T_MARC_UEB LIKE MARC_UEB OCCURS 0.
DATA: T_MARD_UEB LIKE MARD_UEB OCCURS 0.
DATA: T_MFHM_UEB LIKE MFHM_UEB OCCURS 0.
DATA: T_MARM_UEB LIKE MARM_UEB OCCURS 0.
DATA: T_MEAN_UEB LIKE MEA1_UEB OCCURS 0.
DATA: T_MBEW_UEB LIKE MBEW_UEB OCCURS 0.
DATA: T_STEU_UEB LIKE STEU_UEB OCCURS 0.
DATA: T_STEUMM_UEB LIKE STEUMM_UEB OCCURS 0.
DATA: T_MLGN_UEB LIKE MLGN_UEB OCCURS 0.
DATA: T_MLGT_UEB LIKE MLGT_UEB OCCURS 0. " //br010797 neu zu 4.0
DATA: T_MPGD_UEB LIKE MPGD_UEB OCCURS 0.
DATA: T_MPOP_UEB LIKE MPOP_UEB OCCURS 0.
DATA: T_MVEG_UEB LIKE MVEG_UEB OCCURS 0.
DATA: T_MVEU_UEB LIKE MVEU_UEB OCCURS 0.
DATA: T_MVKE_UEB LIKE MVKE_UEB OCCURS 0.
DATA: T_MPRW_UEB LIKE MPRW_UEB OCCURS 0.
DATA: T_LTX1_UEB LIKE LTX1_UEB OCCURS 0.
Internal fields/ tables
DATA: FLAG_ERROR_HAPPENED.
DATA: flag_material_exists. "//br210397 zu 4.0 keine Verwendung mehr
DATA: FLAG_EXIT_TO_BE_DONE.
DATA: HELP_TABIX LIKE SY-TABIX.
DATA: HELP_TRANC LIKE MARA_UEB-TRANC.
DATA: HELP_ALAND LIKE STEU_UEB-ALAND.
DATA: HELP_VKORG LIKE MVKE-VKORG.
DATA: HELP_WERKS LIKE T001W-WERKS.
DATA: HELP_LFDNR LIKE STEU_UEB-LFDNR.
DATA: LAST_MARC_TRANC LIKE MARA_UEB-TRANC.
DATA: LAST_MLGN_TRANC LIKE MARA_UEB-TRANC. " //br010797 neu zu 4.0
DATA: LAST_TEXT_TRANC LIKE MARA_UEB-TRANC.
DATA: CURRENT_TABIX LIKE SY-TABIX.
DATA: GENERAL_SUBRC LIKE SY-SUBRC.
DATA: HELP_FACTOR TYPE P DECIMALS 3.
DATA: USER_SEGMENTS LIKE EDIDD OCCURS 0 WITH HEADER LINE. " insert
DATA: CUST_SEGMENT LIKE EDIDD.
DATA: I_MFIELDRES LIKE MFIELDRES.
DATA: I_MERRDAT LIKE MERRDAT.
DATA: I_EDIDD LIKE EDIDD.
" //br neu zu 3.1g
DATA: T_RES_FIELDS LIKE DELFIELDS OCCURS 0 WITH HEADER LINE.
DATA: T_MFIELDRES LIKE MFIELDRES OCCURS 0.
DATA: T_MERRDAT LIKE MERRDAT OCCURS 0.
DATA: T_EDIDD LIKE EDIDD OCCURS 0.
DATA: BEGIN OF t_matnr OCCURS 0, "//br210397 zu 4.0
matnr LIKE mara-matnr, " wird nicht mehr verwendet
END OF t_matnr. "
DATA: BEGIN OF COUNTER,
TRANC LIKE MARA_UEB-TRANC,
D_IND LIKE MARA_UEB-D_IND,
END OF COUNTER.
DATA: BEGIN OF t_idoc_tranc OCCURS 0, " 4.0
docnum LIKE edidc-docnum, "
tranc LIKE mara_ueb-tranc, "
END OF t_idoc_tranc. "
DATA T_IDOC_TRANC LIKE MATIDOCTRANC OCCURS 0 WITH HEADER LINE."
DATA: FLAG_FITS.
DATA: APPLICATION_SUBRC LIKE SY-SUBRC.
DATA FLAG_MUSS_PRUEFEN LIKE SY-DATAR.
DATA MAX_ERRORS LIKE T130S-ANZUM. " 4.0
note 419281
DATA : FLG_MASS.
CLEAR : FLG_MASS.
FIELD-SYMBOLS: . " 4.0
ALE-distribution unity : IDOC status set by locking "note0361838
data: "note0361838
it_dsp_idocstat like bdidocstat "note0361838
occurs 0 with header line. "note0361838
Initialize data - general
REFRESH T_MFIELDRES.
REFRESH T_IDOC_TRANC.
REFRESH T_IDOC_TRANC. "JH/02.02.98/4.0C KPr100004993
REFRESH t_idoc_tranc_segment. " //br 40 : unnötig
REFRESH matnr_tranc. " -"-
REFRESH t_matnr.
COUNTER-TRANC = 1.
COUNTER-D_IND = 1.
REFRESH T_MARA_UEB.
REFRESH T_MAKT_UEB.
REFRESH T_MARC_UEB.
REFRESH T_MARD_UEB.
REFRESH T_MFHM_UEB.
REFRESH T_MARM_UEB.
REFRESH T_MEAN_UEB.
REFRESH T_MBEW_UEB.
REFRESH T_STEU_UEB.
REFRESH T_STEUMM_UEB.
REFRESH T_MLGN_UEB.
REFRESH T_MLGT_UEB. " //br010797 neu zu 4.0
REFRESH T_MPGD_UEB.
REFRESH T_MPOP_UEB.
REFRESH T_MVEG_UEB.
REFRESH T_MVEU_UEB.
REFRESH T_MVKE_UEB.
REFRESH T_MPRW_UEB.
REFRESH VKORG_ALAND.
REFRESH WERKS_ALAND.
CLEAR APPLICATION_SUBRC.
REFRESH T_MERRDAT.
Check if right function is called
READ TABLE IDOC_CONTRL INDEX 1.
IF SY-SUBRC <> 0.
EXIT.
ELSE.
IF IDOC_CONTRL-IDOCTP <> 'ZBAPI_STUD_IDOC'.
RAISE WRONG_FUNCTION_CALLED.
ENDIF.
ENDIF.
LOOP AT IDOC_CONTRL.
Initialize data - per IDOC
t_idoc_tranc-docnum = counter-tranc.
T_IDOC_TRANC-DOCNUM = IDOC_CONTRL-DOCNUM.
T_IDOC_TRANC-FIRST_TRANC_IDOC = COUNTER-TRANC + 2.
APPEND T_IDOC_TRANC.
Select segments which belong to IDOC
REFRESH T_EDIDD.
LOOP AT IDOC_DATA WHERE DOCNUM = IDOC_CONTRL-DOCNUM.
APPEND IDOC_DATA TO T_EDIDD.
ENDLOOP.
BUSINESS TRANSACTION EVENT (header / data) "note0388000
call function 'OPEN_FI_PERFORM_MGV00200_E' "note0388000
exporting "note0388000
idoc_header = idoc_contrl "note0388000
FLG_APPEND_STATUS = 'X' "note0388000
tables "note0388000
(DEL) idoc_data = idoc_data "note0388000 note0418561
idoc_data = t_edidd "note0418561
idoc_status = idoc_status "note0388000
exceptions "note0388000
others = 1. "note0388000
if sy-subrc = 1. "note0388000
continue. "note0388000
endif. "note0388000
Within one IDOC: loop through data segments:
Prepare internal tables for the current material
LOOP AT T_EDIDD INTO IDOC_DATA.
Transform from CoreData to Normal Data if necesary
CASE IDOC_DATA-SEGNAM.
WHEN 'E1MARAC'.
*--COMMENTED BY SATISH
PERFORM MOVE_E1MARAC_TO_E1MARAM USING IDOC_DATA.
WHEN 'E1MAKTC'.
PERFORM MOVE_E1MAKTC_TO_E1MAKTM USING IDOC_DATA.
*--COMMENTES ENDED BY SATISH
WHEN 'ZBAPI_STUD_SEG'.
PERFORM MOVE_E1MARAC_TO_E1MARAM USING IDOC_DATA.
CLEAR I_ZBAPI_STUD.
Second: Move E1MARAC into E1MARAM
I_ZBAPI_STUD = IDOC_DATA-SDATA.
Third: Move E1MARAM back into IDOC-line
IDOC_DATA-SDATA = I_ZBAPI_STUD.
IDOC_DATA-SEGNAM = 'ZBAPI_STUD_SEG'.
ENDCASE.
CURRENT_TABIX = SY-TABIX.
COUNTER-D_IND = COUNTER-D_IND + 1.
COUNTER-TRANC = COUNTER-TRANC + 2.
CASE IDOC_DATA-SEGNAM.
WHEN 'ZBAPI_STUD_SEG'.
Initialize data - per material
COUNTER-D_IND = 1.
FIRST_TRANC = COUNTER-TRANC.
interpret segment
ZBAPI_STUD_SEG = IDOC_DATA-SDATA.
MOVE-CORRESPONDING ZBAPI_STUD TO I_ZSTUD_UEB.
T_IDOC_ROLLNO-DOCNUM = IDOC_CONTRL-DOCNUM.
T_IDOC_ROLLNO-ROLLNO = I_ZSTUD_UEB-ROLLNO.
APPEND T_IDOC_ROLLNO.
ENDCASE.
if not ZBAPI_STUD_SEG is initial.
ZBAPI_STUD-MANDT = ZBAPI_STUD_SEG-MANDT.
ZBAPI_STUD-ROLLNO = ZBAPI_STUD_SEG-ROLLNO.
ZBAPI_STUD-FNAME = ZBAPI_STUD_SEG-FNAME.
ZBAPI_STUD-LNAME = ZBAPI_STUD_SEG-LNAME.
INSERT ZBAPI_STUD FROM ZBAPI_STUD_SEG.
COMMIT WORK.
ENDIF.
*-- ALE ditribution unity : update IDOC status "note03618
LOOP AT it_dsp_idocstat. "note036
LOOP AT IDOC_STATUS WHERE DOCNUM = it_dsp_idocstat. "note036
DELETE idoc_status INDEX sy-tabix. "note036
ENDLOOP. "note036
APPEND it_dsp_idocstat TO idoc_status. "note036
ENDLOOP. "note036
*--GENERATING THE IDOC STATUS
PERFORM HANDLE_ERROR_EXT " //br40
TABLES "
IDOC_CONTRL "
IDOC_STATUS "
RETURN_VARIABLES "
T_MERRDAT "
T_IDOC_TRANC "
T_IDOC_ROLLNO "JH/4.0C/KPr100004993
USING "
GENERAL_SUBRC "
NO_APPLICATION_LOG "
MASSSAVEINFOS "wk/40c
CHANGING "
WORKFLOW_RESULT. "
PERFORM HANDLE_ERROR
TABLES
IDOC_CONTRL
IDOC_STATUS
RETURN_VARIABLES
T_MERRDAT
T_IDOC_ROLLNO "JH/4.0C/KPr100004993
USING
APPLICATION_SUBRC
CHANGING
WORKFLOW_RESULT.
SORT T_IDOC_ROLLNO BY ROLLNO. "note 315124
React on general error
DATA: I_MERRDAT LIKE MERRDAT.
IF GENERAL_SUBRC <> 0.
I_MERRDAT-MSGTY = 'E'.
I_MERRDAT-MSGID = SY-MSGID.
I_MERRDAT-MSGNO = SY-MSGNO.
I_MERRDAT-MSGV1 = SY-MSGV1.
I_MERRDAT-MSGV2 = SY-MSGV2.
I_MERRDAT-MSGV3 = SY-MSGV3.
I_MERRDAT-MSGV4 = SY-MSGV4.
APPEND I_MERRDAT TO T_MERRDAT.
ENDIF.
LOOP AT T_MERRDAT INTO I_MERRDAT
WHERE MSGTY = 'S' "success
OR MSGTY = 'D' "dummy
OR MSGTY = 'I' "Information " //br011097 zu 3.1I
OR MSGTY = 'H' "dummy " 4.0
OR MSGTY = 'W'. "warning
DELETE T_MERRDAT.
ENDLOOP.
ENDLOOP.
ENDLOOP.
ENDFUNCTION.
*& Form handle_error_ext
FORM HANDLE_ERROR_EXT
TABLES
IDOC_CONTRL STRUCTURE EDIDC
IDOC_STATUS STRUCTURE BDIDOCSTAT
RETURN_VARIABLES STRUCTURE BDWFRETVAR
T_MERRDAT STRUCTURE MERRDAT
IDOC_TRANC STRUCTURE MATIDOCTRANC
JH/02.02.98/4.0C KPr100004993 (Anfang)
T_IDOC_ROLLNO STRUCTURE T_IDOC_ROLLNO
JH/02.02.98/4.0C KPr100004993 (Ende)
USING
GENERAL_SUBRC LIKE SY-SUBRC
NO_APPLICATION_LOG LIKE SY-DATAR
MASSSAVEINFOS LIKE MASSSAVINF
CHANGING
WORKFLOW_RESULT LIKE BDWF_PARAM-RESULT.
DATA FLAG_ERROR_HAPPENED.
DATA I_MERRDAT LIKE MERRDAT.
DATA IDOC_INDEX_2_SUBRC LIKE SY-SUBRC.
DATA AL_HANDLES TYPE BAL_T_LOGH. "//br99
SORT T_IDOC_ROLLNO BY ROLLNO. "note 315124
React on general error
IF GENERAL_SUBRC <> 0.
REFRESH T_MERRDAT.
i_merrdat-tranc = 0. " //br261197
READ TABLE IDOC_TRANC INDEX 1. " zu 40b
I_MERRDAT-TRANC = IDOC_TRANC-FIRST_TRANC_IDOC. "
I_MERRDAT-MSGTY = 'E'.
I_MERRDAT-MSGID = SY-MSGID.
I_MERRDAT-MSGNO = SY-MSGNO.
I_MERRDAT-MSGV1 = SY-MSGV1. I_MERRDAT-MSGV2 = SY-MSGV2.
I_MERRDAT-MSGV3 = SY-MSGV3. I_MERRDAT-MSGV4 = SY-MSGV4.
APPEND I_MERRDAT TO T_MERRDAT.
ENDIF.
DATA: C_TRUE,
C_FALSE VALUE 'X'.
If error happened ==> Rollback whole work....
LOOP AT T_MERRDAT INTO I_MERRDAT WHERE MSGTY NA 'SDHWI'.
EXIT.
ENDLOOP.
IF SY-SUBRC = 0.
FLAG_ERROR_HAPPENED = C_TRUE.
ROLLBACK WORK.
ELSE.
FLAG_ERROR_HAPPENED = C_FALSE.
ENDIF.
Set IDOC status
two cases:
single IDOC-processing: ==> error can be written in IDOC status
package processing ==> anononymous "package error" for all IDOCs
READ TABLE IDOC_CONTRL INDEX 2.
IDOC_INDEX_2_SUBRC = SY-SUBRC.
IF SY-SUBRC = 0.
IF 1 = 2. "//br40
MESSAGE E051(B1). "
ENDIF. "
CLEAR I_MERRDAT.
I_MERRDAT-MSGID = 'B1'.
I_MERRDAT-MSGTY = 'E'.
I_MERRDAT-MSGNO = '051'.
ENDIF.
IF IDOC_INDEX_2_SUBRC NE 0 OR FLAG_ERROR_HAPPENED = C_FALSE.
Nur in diesen Fällen wird Application Log geschrieben
Delete all Successes and Dummy records from t_merrdat
DELETE t_merrdat WHERE msgty = 'S' "success " testweise
OR msgty = 'D'. "dummy "
LOOP AT T_MERRDAT INTO I_MERRDAT WHERE MSGTY = 'D'. "
I_MERRDAT-MSGTY = 'S'. "
MODIFY T_MERRDAT FROM I_MERRDAT. "
ENDLOOP. "
ENDIF.
WORKFLOW_RESULT = 0.
LOOP AT IDOC_CONTRL.
Set IDOC status
CLEAR IDOC_STATUS.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IF FLAG_ERROR_HAPPENED = C_FALSE.
Application log
PERFORM WRITE_APPL_LOG TABLES IDOC_TRANC
T_MERRDAT
IDOC_STATUS
USING IDOC_CONTRL
FLAG_ERROR_HAPPENED
NO_APPLICATION_LOG
MASSSAVEINFOS
AL_HANDLES.
idoc_status-status = '53'. "OK!
APPEND idoc_status.
JH/02.02.98/4.0C KPr100004993 (Anfang)
Fill Return variables
CLEAR RETURN_VARIABLES.
RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
RETURN_VARIABLES-WF_PARAM = 'Processed_IDOCs'.
APPEND RETURN_VARIABLES.
Verknüpfungseintrag anlegen
READ TABLE T_IDOC_ROLLNO WITH KEY ROLLNO = IDOC_CONTRL-DOCNUM
BINARY SEARCH.
IF SY-SUBRC = 0.
RETURN_VARIABLES-DOC_NUMBER = T_IDOC_ROLLNO-ROLLNO.
RETURN_VARIABLES-WF_PARAM = 'Appl_Objects'.
APPEND RETURN_VARIABLES.
ENDIF.
JH/02.02.98/4.0C KPr100004993 (Ende)
ELSE.
IF IDOC_INDEX_2_SUBRC NE 0.
Application Log
PERFORM WRITE_APPL_LOG TABLES IDOC_TRANC
T_MERRDAT
IDOC_STATUS
USING IDOC_CONTRL
FLAG_ERROR_HAPPENED
NO_APPLICATION_LOG
MASSSAVEINFOS
AL_HANDLES.
ELSE.
IDOC_STATUS-MSGID = I_MERRDAT-MSGID.
IDOC_STATUS-MSGTY = I_MERRDAT-MSGTY.
IDOC_STATUS-MSGNO = I_MERRDAT-MSGNO.
IDOC_STATUS-MSGV1 = I_MERRDAT-MSGV1.
IDOC_STATUS-MSGV2 = I_MERRDAT-MSGV2.
IDOC_STATUS-MSGV3 = I_MERRDAT-MSGV3.
IDOC_STATUS-MSGV4 = I_MERRDAT-MSGV4.
IDOC_STATUS-STATUS = '51'. "ERROR!
APPEND IDOC_STATUS.
ENDIF.
Fill Return variables
CLEAR RETURN_VARIABLES.
RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
return_variables-wf_param = c_wf_par_processed_idocs.
RETURN_VARIABLES-WF_PARAM = 'Error_IDOCs'.
APPEND RETURN_VARIABLES.
WORKFLOW_RESULT = 99999.
ENDIF.
APPEND idoc_status.
ENDLOOP.
IF NO_APPLICATION_LOG IS INITIAL.
CALL FUNCTION 'BAL_DB_SAVE' "//br99
EXPORTING
I_IN_UPDATE_TASK = ' '
I_SAVE_ALL = ' '
I_T_LOG_HANDLE = AL_HANDLES.
EXCEPTIONS
LOG_NOT_FOUND = 1
SAVE_NOT_ALLOWED = 2
NUMBERING_ERROR = 3
OTHERS = 4.
CALL FUNCTION 'BAL_GLB_MEMORY_REFRESH' "//br99
EXPORTING
I_AUTHORIZATION =
I_REFRESH_ALL = ' '
I_T_LOGS_TO_BE_REFRESHED = AL_HANDLES.
EXCEPTIONS
NOT_AUTHORIZED = 1
OTHERS = 2
ENDIF.
ENDFORM. " handle_error
Save, check and activate
11. Assigning the Inbound Function Module to Basic Type & Message Type
o Go to T. Code WE57
o Click on change, continue, continue and New Entries Button
o Enter the Module as IDOC_INPUT_ZBAPI_STUD_MAS
o Type as F
o Basic Type as ZBAPI_STUD_IDOC
o Message Type as ZBAPI_STUD_MAS.
o Direction as 2
o Save and back
Now Login in 810 client
12. Assigning the Inbound Function Module in ALE Table
o Go to T. Code BD51
o Click on continue, New Entries button
o Give the Inbound Function Module IDOC_INPUT_ZBAPI_STUD_MAS
o Give Input t. as 0 (zero)
o Save and back
13. Creating Process Code
o Go to T. Code WE42
o Click on Change, New Entries Button
o Give Process Code name as ZSTUD, give Description & Save
o Select Processing with ALE Services Radio button
o Select Processing by Function Module Radio button
o Click the ALE Table (arrow Icon) in Identification
o Give the Function Module Name ZIDOC_INPUT_ZBAPI_STUD_MAS
o Give maximum number of repeats 0
o Save and back, back
o Select the process code from the list & click on Logical Messages Icon
o Give the Message Type as ZBAPI_STUD_MAS
o Save & Back, Save & Back, Save & Back
14. Changing the Customer Distribution model in Receiving system
o Go to T. Code BD64
o Click on change and Create model view button
o Select the model view & click on Environment -> Generate Partner Profiles
o Select Transfer IDOC Immediately and Trigger Immediately radio buttons
o Click on Execute
o You should get a list in green color which means it executed successfully.
15. Assigning the Process Code to Message Type in Receiving System
o Go to T. Code WE20
o Expand Partner Type LS
o Select the Partner Profile STUD_S
o Double click on Message Type ZBAPI_STUD_MAS in Inbound parmtrs.
o Give the Process Code as ZSTUD
o Click on Trigger Immediately Radio button
o Save & Back
o Save & Back
16. Creating the Selection Program (Outbound Program)
Login in client 800.
Go to T. Code SE38
Create a Report Program as ZSTUD_SEND with the following code
REPORT ZSTUD_SEND
NO STANDARD PAGE HEADING.
TABLES: ZBAPI_STUD.
DATA: IT_STUD LIKE ZBAPI_STUD OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN:BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-H01.
SELECT-OPTIONS: S_ROLLNO FOR ZBAPI_STUD-ROLLNO.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN:BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-H02.
PARAMETERS: P_MESTYP LIKE EDIDC-MESTYP,
P_RCVPRN LIKE TBDLST-LOGSYS.
SELECTION-SCREEN:END OF BLOCK B2.
SELECTION-SCREEN:END OF BLOCK B1.
START-OF-SELECTION.
PERFORM CREATE_STUDENT.
PERFORM CREATE_IDOC.
*& Form CREATE_STUDENT
sending student
FORM CREATE_STUDENT.
SELECT * FROM ZBAPI_STUD
INTO TABLE IT_STUD
WHERE ROLLNO IN S_ROLLNO.
ENDFORM. " CREATE_STUDENT
*& Form CREATE_IDOC
IDOC Creation
FORM CREATE_IDOC.
DATA : IMAS_DATA LIKE EDIDD OCCURS 10 WITH HEADER LINE,
IMAS_CON LIKE EDIDC OCCURS 10 WITH HEADER LINE,
ICOM_CON LIKE EDIDC OCCURS 10 WITH HEADER LINE.
IMAS_CON-RCVPRT = 'LS'.
IMAS_CON-RCVPRN = P_RCVPRN.
IMAS_CON-IDOCTP = 'ZBAPI_STUD_IDOC'.
IMAS_CON-MESTYP = P_MESTYP.
IMAS_CON-DIRECT = 1.
APPEND IMAS_CON.
LOOP AT IT_STUD.
IMAS_DATA-SEGNAM = 'ZBAPI_STUD_SEG'.
IMAS_DATA-SDATA = IT_STUD.
APPEND IMAS_DATA.
ENDLOOP.
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
EXPORTING
MASTER_IDOC_CONTROL = IMAS_CON
OBJ_TYPE = ''
CHNUM = ''
TABLES
COMMUNICATION_IDOC_CONTROL = ICOM_CON
MASTER_IDOC_DATA = IMAS_DATA
EXCEPTIONS
ERROR_IN_IDOC_CONTROL = 1
ERROR_WRITING_IDOC_STATUS = 2
ERROR_IN_IDOC_DATA = 3
SENDING_LOGICAL_SYSTEM_UNKNOWN = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
COMMIT WORK.
LOOP AT ICOM_CON.
WRITE :/ 'IDOC: ', ICOM_CON-DOCNUM, 'CREATED SUCCESSFULLY'.
ENDLOOP.
ENDFORM. " CREATE_IDOC
17. Transferring the student records from 800 to 810 client
Execute Report Program ZSTUD_SEND
Give the Range of Roll Nos to Transfer
Give Message Type as ZBAPI_STUD_MAS
Give Receiver Logical system as STUD_R
Execute
You should get the IDOC Number
Take the IDOC Number and go to T. Code WE05 & Execute
In Outbox you can see the IDOC Status
Select the status record in left side window
Double click on the Status record in right side window
You can see the Control Record, Data Record and Status Records for that IDOC
If the ICON is green and the status code is 3, it means the IDOC is passed to PORT Successfully.
Now Login in 810 client
Go to T. Code WE05 & Execute
You can see the status record in left side window
If the status no is 53 and color is green, it means the IDOC is Posted to Application successfully.
You can see the Log Information by double clicking on the status record in right side window.
Now in left side window, you can see the Control Record, Data Record & Status Record of the IDOC
Now go to T. Code SE16
Give the table name ZBAPI_STUD & press F7
See the contents of the table
The table is updated with the students records transferred from 800 client with our selection program.
Reward if useful
Thanks
Jagadeesh.G -
I have an i-pad and have just got an i-phone but want 2 use a different I cloud? I've set up new email account and apple ID, but I can't change the I-cloud settings, can u help PLS??
The procedure is Settings>Messages>Send & Receive at>You can be reached by iMessages at>Add another email address. The email address has to be a valid working email address, obviously. Apple should verify the email address and you have to go to the inbox of that email account, read the verification email from Apple and follow the inductions in the email in order to complete the verification. Then you go back to the settings, uncheck your email address and check the new email address to be used as the contact email address.
-
How do I move a project from one library to a different existing library in Aperture 3.2.3?
How do I move a project from one library to a different existing library in Aperture 3.2.3?
Export as a Library, then import into the second (already existing) Library.
From the User Manual:
In the Library inspector, select the items you want to transfer, then choose File > Export > Items as New Library. -
I would like to answer the phone with one touch using the speaker button
I would like to answer the phone with one touch using the speaker button?
this is a user helping user forum if you wish to request/advice or complain to apple you will likely have more success using the feedback channel
http://www.apple.com/feedback/iphone.html -
Is the PSD created from Multi-page PDF to PSD different from one created using File- Open?
My printer is telling me that a PSD created using the Automate->Multi-page PDF to PSD is different from one created by using File->Open. Does anyone know if this is true? If so, why?
CMD I on the .ai file
Change open with to AICS6
Click Change All -
ICloud sync problem - getting messages from one contact on two different phones
My partner and I accidentally synced our phones to the same iCloud account and all of our contacts merged. We solved that problem but now we're both getting messages from one of my contacts at the same time. We've both deleted the contact and the message string, and that hasn't seemed to help. Any advice would be most appreciated.
Reset iMessage by turning it off and then back on. You might have to restore phones as new because I message Registers the phone with the cloud.
-
Can you sync 2 i phones to one itunes using seperate Apple IDs
My problem is : i have an iphone 4 and my boyfriend a 3gs, until recently we used seperate computers for sync but one broke so we have only 1 between us. We have sepeate Apple IDs and log in to our own each time we want to sync our phones, but we seem to end up with all the same content, ie apps music ect. We have to tick and untick stuff we want and dont. Also we purchase/download our own content from app store using our own ID's yet they too apper to sync to both devices.... What am i doing wrong?? HELP!
ChelseaSee this tip from Apple: http://support.apple.com/kb/HT1495
-
[Help] Export or copy a virtual copy from one library to a different library?
Hi all,
I need to be able to extract or export a virtual copy (VC) from one library to an other library. The same image that the VC depend on is represented in both libraries but since a friend will be editing some images on his computer and therefor his library I need to be able to import the different VC he makes to my library later on or perhaps merge since he needs the VC I make.
So please, can someone tell me how to do this. If we only make some editing of a RAW we just save the metadata and we are done, but with VC it is different.
Thanks in advance!Use File > Export as Catalog in the current catalogue, and use File > Import from Catalog
Ask yourself if it's really a smart idea to (a) work with multiple catalogues, and (b) catalogue the same picture in more than one catalogue. As you've found, working with multiple catalogues introduces inefficiencies like trying to copy VCs around, while cataloguing the same image in more than one catalogue is a recipe for confusion.Maybe you should be asking how to resolve the underlying workflow problem?
John -
Copying page from one app to another: Different themes
All the threads on this forum for steps to copy a page from one app to another refer to Raj's instructions at Synonyms
What if the 2 apps involved have different themes? When I do the final step (f) in his procedure, that page will have Theme X and the rest of the pages will have Theme Y. How is this handled?
Will the new page just use the templates it needs from whatever theme the app it is imported into happens to be using? Or would it bring along the templates it uses from the old application?
ThanksRaj's technique predates themes and has no connection with themes. A page has one numeric attribute that references a page template or is null.
Raj's technique never handled the case where the referenced page template didn't exist in the target application.
It's your job (see the caveat in that threat) to ensure that you don't reference non-existent shared components from the page being copied.
What if you do anyway? That isn't part of the solution that was presented but the answer is you have to repair the damage.
What you are saying, in effect, is that that technique for copying pages across apps really works best only if the 2 apps involved have the same theme, right?There are at least four cases: 1) the page template attribute is null so it will use the app's default page template which I believe is adjusted when you switch themes; 2) the page template attribute is not null and locates an existing page template which is a template in the current theme. In this case everything should work correctly; 3) the page template attribute is not null and locates an existing page template which is not a template in the current theme. In this case the referenced page template will be used at runtime, but the theme reports and/or switch theme functionality may not work as expected with respect to that page; 4) the page template attribute does not locate an existing template. I don't know what the result is in this case.
I also don't know if the template a page uses is considered to be part of a given theme based on the template's name or numeric ID.
Scott
Maybe you are looking for
-
How many times do I bring my iphone in to be replaced before they give me a new one
I brought my iPhone in this past February to get it replaced, hardware problem. Then again in March because the screen kept freezing and wouldn't unlock, they replaced it then as well. Now, my phone shuts off on it's own, and the only way to turn it
-
Hi All, What is the code to write when i want to display a date like 9 months before a certian date? Like for example, i have a data which is StartDate and the value is 30 June 2014. In my report i want to display 30 Sept 2013. How can i do that? Th
-
No disk found Time Capsule 2 TB
Hi There, I have a Time Capsule and the wireless works perfectly. However, I cannot do backups using time machine because there are no disks in the 'disk' menu. I already tried updating Airport, reset my time Capsule to factory setting. Still haven't
-
Accessing ESSO Reporting Services Console
Hi to everyone, I have just deployed the Oracle ESSO Reporting Services (version 11.1.1.5.0) with MS SQL Server 2008 R2 database to collect events about ESSO-LM. Both the Reporting Console and database are on the same server with Windows Server 2008
-
5,000 responses is not enough for me.
5,000 responses for the plus upgrade is not enough for me. whats the next level up...?