Until 50,000 records reaches does the request status will be yellow?

Hi all,
I can see there are 20,000 records in the request but then it is in yellow, so i believe until the same request reaches 50,000 records the request will be still in yellow isn it?
Can anyone pls confirm me on this!!
Thanks
Pooja

Its not necessary that it should have 50000 records. It completely depends upon how many records in tables are satisfying the conditions of the data selection in infopackage.
It will fetch all the records then only it will change to green.

Similar Messages

Count for item records reaches 999 the second idoc gets triggered!

Hi Experts,
     I have an issue. Sender is file and receiver is idoc with a header and item level records. Only one header and n number of records can be there.
Now we want to make this way that as soon as the count for item records reaches 999 the second idoc gets triggered.
Hints / Solutions Pls.
Regards,
Arnab .

incorporate mapping logic such that for every 999 item records create new IDoc node
check with this UDF for IDoc node mapping, item records will be input to UDF
int count = a.length;
int k=999;
result.addValue("");
for(int i=0;i<count;i++)
      if (i>=k){
          result.addValue(""); // if records > 999, add IDoc node
          k=k+999;
Do rest of the mapping accordingly

SCOM2012 Web Transaction Monitor - Displaying the Request Status

I have successfully created a 'Web Application Transaction Monitor' using the SCOM 2012 R2 Console wizard. The monitor goes through several listed website URLs and completes.
What I'm interested in is how to display the 'Request' status objects. I use the MS-Visio plug-in to display various dashboards within Sharepoint and I would like to display the part of the Web Transaction which is showing an error.
I can see the individual requests under the Availability of the created 'Web Application Transaction Monitor'. I just need to capture those objects for displaying within a view or MS-Visio diagrams.
The email notifications show which of the URLs are having the issue, but I do not seem to find a view or object I can display.
Any ideas on what could be done would be appreciated. I was hoping NOT to create individual Web Txn Monitors for each URL, but that maybe the only solution.

When I create a Dashboard View and add the Alert Widget, I can get the URL from Name Column.
Juke Chou
TechNet Community Support

Whenconnecting to the internet thru safari, the requested page will begin to appear and then the screen will revert to the iPad home page. Have powered the ipad down and back yp with no change.

When I connect to the internet thru Safari, the requested page will begin to appear and then revert to the Ipad home page. I have powered of and back on and wi-fi signal is strong. any suggestions.

Safari crash regularly
https://discussions.apple.com/thread/2460899?tstart=30

Does the Apps store will come in the 2.1 update for the iPod Touch 1G?

Does the Apps store will come in the 2.1 update for the iPod Touch 1G?
Does my ipod touch 1G can play games like the ipod touch 2G??
anyone can help?

since i dont have credit card, i paid $10 just for an update with nothing to do.
You need a Credit Card or an iTunes gift card to create an iTunes account.
Since you purchased the 2.0 upgrade, you already have an iTunes account.
The 2.0 upgrade comes with the Apps store you can use on the iPod touch. Also, you can use the App store in iTunes.
With both of these you can download free apps and you do not need a credit card since you already have an iTunes account.
If you wish to make an actual purchase (pay money) for an app, you will need a CC or gift card balance on you iTunes account.
Free apps/games thru the App store require an iTunes account (which you already have) and do not require that you have a CC or gift card balance.

WHEN DOES THE REQUEST FORM "BOX" ARRIVE???

i filled out an online request paper and payed the stupid shipping fee to get my mini "repaired", and i just wanted to know when the "box" would get here. By the way, i filled out the request sheet 11/19, midnight.

HELP!!!

Unable to manually set the BW request status from hanged yellow state

Hi All,
We were running a BW upload when it failed due to some ABAP dump. The request remained in the status yellow.
We tried to manually set the status to red or green in RSA1--> manage (infoprovider)
This did not allow me to reset the status there.
I searched the SDN and found this blog: http://scn.sap.com/community/data-warehousing/netweaver-bw/blog/2013/10/23/deleting-dtp-requests-when-the-dtp-step-is-hanged
But in our case the table : RSBKREQUEST shows "USTATE" and "TSTATE as "0"(zero). I can reset the status only when it shows 5. So running RSBM_GUI_CHANGE_USTATE in SE37 to reset the status to "0" (zero) is not an option here.
Iam sure others would have come across this situation before. If you could throw some light on how to reset the BW request status to RED or Green so that I can restart the load again.
Your help is really appreciated.
Thanks
Manmath

Hi,
please check the below tables have your DTP request ID.
Note: Be aware the deleting the request form the data base tables
RSBKREQUEST
RSREQDONE,
RSREQICODS,
RSICCONT
Thanks,
Phani.

How does the "Read Status Byte" work in the VISA test panel?

I'm currently trying to replace an HP-85 with a modern computer running VB.NET, which will communicate with an HP 3421A. Unfortunately the 3421A was created before SCPI was created, so I believe the commands I am able to send are dictated by what the 3421A lists in the manual (http://exodus.poly.edu/~kurt/manuals/manuals/HP%20Agilent/HP%203421A%20Operation,%20Programming%20%20&%20Configuration.pdf).
The commands I'm trying to use to troubleshoot are "DCV", which reads a voltage, and "SR", which returns 24 different registers, with register 1 being the status byte. When I write "DCV" and then read, it returns a correct voltage. When I write "DCV" and click "Read Status Byte" in the VISA panel, it lets me know that data is available to be read and when I read it returns a correct voltage. When I write "DCV", then "SR" and then read, it returns 24 different bytes, with the first byte being the status register, but it doesn't recognize the "DCV" command from before and the status byte is now 0, which leads me to believe that it's overwriting the "DCV" command from before.
How can I mimic the functionality of the "Read Status Byte" button in the VISA panel? How does this work on instruments created before SCPI was implemented? Sending "*STB?\n" doesn't work. I am new to instrumentation so if I left out some necessary information please let me know.

Thank you for the suggestion. I found a solution by adding NationalInstruments.NI4882.dll and using the SerialPoll function.

When does the whats app will be able to be downloaded in iphone

When will be the whats app will be able to be downloaded in the iphone

It is able to be downloaded in the iPhone. It is not available for download to the iPad. Ask the developer.

Table or view with the request status of all requests in a cube

Dear all,
I search the table or view which is used by Cube / Manage -> InfoProvider Administration (Requests).
Target is to get all status information of all requests started by one InfoPackage.
I found several tables alone but no view. I have currently
RSREQICODS, RSMDATASTATE, RSSELDONE.
Best regards.

I've found a solution for the problem:
*    Select all requests for one Infopackage
      SELECT distinct RNR from rsseldone into table ta_done where LOGDPID = IPak.
      LOOP AT ta_done
        INTO wa_done.
        WRITE: / 'Request: ', wa_done-RNR.
*       Select the maximum Request Number in the Cube
        SELECT SINGLE ICUBE RNSIDLAST from RSICCONT Into wa_cont where RNR = wa_done-RNR.
        WRITE: / 'Icube: ', wa_cont-ICUBE.
        WRITE: / 'Max: ', wa_cont-RNSIDLAST.
*       Check the Maximum Request with status technical and quality ok
        SELECT TECHOK QUALOK from RSMDATASTATE into table ta_state where INFOCUBE = wa_cont-ICUBE.
        LOOP AT ta_state INTO wa_state.
            WRITE: / 'ID TECHOK: ', wa_state-TECHOK.
            WRITE: / 'ID QUALOK: ', wa_state-QUALOK.
            IF wa_state-TECHOK > l_maxid AND wa_state-QUALOK > l_maxokid AND wa_state-QUALOK = wa_state-TECHOK.
               l_maxokid = wa_state-TECHOK.
            ENDIF.
        ENDLOOP.
        IF wa_cont-RNSIDLAST > l_maxokid OR wa_cont-RNSIDLAST = 0.
          WRITE: / 'Request is running with Request: ', wa_cont-RNSIDLAST.
        ELSE.
          WRITE: / 'all Green'.
          l_cont = 0.
        ENDIF.
     ENDLOOP.

HT1222 if i update ios version, does the factory unlock will be lock or remain in unlock mode.

if i update ios version, does factory unlock will be locked or remain unlocked

Did you buy it direct from Apple as unlocked? Or did you formally ask your carrier to unlock it, and then restore it in iTunes to process that unlock request after they told it was ready?
If not, then yes, it is going to relock as you did not officially unlock it.

Why does the address/status bar not work?

After updating to 9.0.1, my status bar will not work, or my address bar. If I try to type in anything and press enter into the address bar, nothing happens. Also, I cannot press forward or back as they always remain grayed out. The only way I can get to a website is by pressing home, which is thankfully google. I have to google the url to go to it.
Remembering now actually, I copied all the folders from the main firefox folder and pasted them into a new install of firefox (I had this problem actually before firefox updated). I was hoping that copying these folders would save my addons and etc. after I downloaded a new firefox and re-installed it. I put the folders back and firefox is still messed up :/
I just want it to work more Q_Q

That issue can be caused by an extension that isn't working properly.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

How apple will print an iphoto book ? Does anyone will see it while printing there? or does the printing processes will be automatically?

Hello,
I am muslim girl and I usually cover my hair and my body as well. ( in my religion no men allow to see my body uncovered ). I have created an iphoto book with my pictures without the covers. I would like to purchase the book through apple store. But I am worried if someone will see my pictures while printing the book in the lap or not (especially men) ? I have contact customer service in New Zealand to have the answer but they couldn't help me.
So my Question is:
Do you know what exactly the processes of printing the book? is it going to be automatic or someone will review my order and see it ?
I haven't purchase the book yet.
I am waiting for your answers
Ba2ol

As this is important to you I would think it very likely that at some point in the process - Quality Control, for instance - the book will be reviewed by a person. As to the sex of that person, we have no way of knowing.
Regards
TD

Does the Task Status Email Notification definition work for you?

Hi,
Have you ever set the email definition Task Status Email Notification? Worked?
I've configured this template in my process tasks notifications. The e-mails for C and R status were sent OK but the values were all empty. Below are the subject and body of this email definition.
Subject
Process task <Process Definition.Tasks.Task Name> is <Process Instance.Task Details.Data>.
Body
The Process task <Tasks.Task Name> is <Task Details.Status>.
The details of this process task are as follows:
Process Task Name: <Process Definition.Name>
Process Task Status: <Task Details.Status>
Resource Name: <Resource.Resource Name>
Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
Assigned to: <Process Instance.Task Information.Assignee First Name> <Process Instance.Task Information.Assignee Last Name> [<Process Instance.Task Information.Assignee User ID>]
Response Code : <Responses.Response>
Response Description : <Responses.Description>
Error Details : <Task Details.Reason>

Thanks for your attention.
For all custom process tasks I have set this definition to notify the target user, for example, when the task is Completed or Rejected. For all all I've got the same problem: the notification e-mail is sent but the values are all empty.
I thought the tags were based on the fields returned by the getProvisioningTaskDetails that returns the information below. But you can see the tags are different from.
Process Instance.Task Details.Key
Process Instance.Task Details.Type
Process Instance.Task Details.Status
Process Instance.Task Details.Data
Process Instance.Task Details.Reason
Process Instance.Task Information.Assign Type
Organizations.Key
Process Instance.Key
Process Definition.Name
Process Instance.Descriptive Data
Process Instance.Task Details.Projected Start
Process Instance.Task Details.Projected End
Process Instance.Task Details.Actual Start Date
Process Instance.Task Details.Actual End Date
SCH_REASON
Process Instance.Task Details.Updated By
Process Instance.Task Details.Update Date
Process Instance.Task Details.Row Version
Process Instance.Task Details.Action
Process Instance.Task Details.System level
Process Instance.Task Details.Creation Date
Process Instance.Task Details.Created By
Process Instance.Task Details.Note
Process Definition.Tasks.Key
Process Definition.Tasks.Task Name
Process Definition.Tasks.Task Description
Process Definition.Tasks.Days
Process Definition.Tasks.Hours
Process Definition.Tasks.Minutes
Process Definition.Tasks.Milestone Datalabel
Process Definition.Tasks.Disable Manual Insert
Process Definition.Tasks.Responses.Description
Process Instance.Task Information.Updated By User Key
Process Instance.Task Information.Updated By User ID
Process Instance.Task Information.Updated By First Name
Process Instance.Task Information.Updated By Last Name
Process Instance.Task Information.Assignee User Key
Process Instance.Task Information.Assignee User ID
Process Instance.Task Information.Assignee First Name
Process Instance.Task Information.Assignee Last Name
Process Instance.Task Information.Assignee Email
Process Definition.Tasks.Responses.Key
Process Instance.Task Information.Row Version
TLG_KEY
Status.Category
Groups.Key
Groups.Group Name
Thanks,
Renato.

ICloud is broken - why does the system status say green?

Mail not working on iPhone, iPad, mac or iCloud yet status says everything is ok. Rubbish.

Totally baffled now. A raft of email pdates to this topic on Apple Support
Communities just hit my iPhone as emails - ending a 3 day drought - but
nada to Apple Mail.
They must be working on it a piece at a time.

Until 50,000 records reaches does the request status will be yellow?

Similar Messages

Maybe you are looking for