Unused Material Master Number
Hi ABAP Masters,
Do you know a way where we can reuse internal number ranges for Material Master?
Thanks
yeah u can use .U have to find out rel.user exit which takes the internal Number which is given my user
Regards
Prabhu
Similar Messages
-
Material Master Number Range - Very Urgent
Hi ,
My client is having existing material codification as below :
all material types for e.g. ROH, HALB, FERT will be starting their material code with 00 or 01 or 02 etc. sine the first two digits denotes the year , which will vary from material to material. The characters used will be from minimum 8 to maximum 14 - Alphanumeric.
for e.g. my material code will be
for ROH - 000040101F0101
for FERT - 00801000101
for HALB - 013000101C
here for all materail type first 2 digit are for year and next will be prod. code , then assy , then sub assy , if forging applicable it will be F , if casting then - C
How this can be mapped in SAP as one series for all material types, is it possible for system to identify the material type, what is advantage & disadvantage of the same.
Pl. help
Thanks & Regards,
Vikas Mayekar.Hi
Using Standard SAP for Material number ranges may not be able to map your requiremnts.
But you can use the SAP enhancements available for the Number ranges determination & so onj...
Please use the User exit in CMOD or SMOD
You can use enhancement MGA00002 (for industry) or enhancement MGW00002 (for retail) for this.
For more information, see the documentation for the following components assigned to these enhancements:
Industry
EXIT_SAPLMG02_001
EXIT_SAPLMG02_002
Retail
EXIT_SAPLMG72_001
With the exception of the transfer structure, this function is identical to customer enhancement MGA00002 for material number assignment for the material master for industry. Please see customer enhancement MGA00002 for more information and for sample coding.
EXIT_SAPLMG72_002
With the exception of the transfer structure, this function is identical to customer enhancement MGA00002 for material number assignment for the material master for industry. Please see customer enhancement MGA00002 for more information and for sample coding.
EXIT_SAPLMGNK_003
Please take help of ABAPer's for implementing the same
Thanks & Regards
Kishore -
Hi Gurus,
In the our system, following number ranges are set for material master,
1 - 820000 to 899999 Current number 896492 (internal)
2 - 900000 to 979999
3 - 980000 to 999999
The number range 1 is going to complete.
As the next numbers after 899999 is already in use for different material type, I will not be able to extend the material number range 1.
What should I do,
Should I create altogether new number range and assign to this material type?
- Will system allow me to add another new number range along with existing number range or I need to remove the existing number range and attach new number range. (not yet tried. based on your feed back will try)
- If system allow to add the new number range along with existing, will system understand after reaching last number, it will go to next number range and start from there.
Kindly guide me.
Thanks & Best Regards,
MohanHi,
then just delete the number range from the group and add a new one.
Use the delete icon with the red line to delete the number range from the group.
You have to change the status to 0 first
To quote the SAP help
1. Branch to number status maintenance.
2. Set the number status to '0'.
3. Branch to interval maintenance.
4. Delete the interval.
Then you can add a new interval
Steev B -
Material Master Number Range Issue
Dear Experts,
One of Our Client has 3 company codes and each company has seperate material master.
Company 1: 0100000000 to 0399999999 (10 Characters)
Company 2: 2010000000 to 9999999999 (10 Characters)
Company 3: 10000000000 to 99999999999 (11 Characters)
Is it possible to configure all the three number ranges in Same Client using different Material Type ?.
According to client, the number ranges are not overlapping.
Please suggest.
-MSKHi
yes possible
Company 3: 10000000000 to 99999999999 (11 Characters)
want suggestion why not go with below
30100000000 to 399999999999 you have 11 charetersr here it wont get overlap i think
Regards
kailas ugale -
Problem with material master number range
Hi,
we have a problem with the material number range when stop the transaction of creation a material master data (MM01) the system has a jump of number range.
Example -> while creating a new material master the system gives me a number preview (46) but if I stop the transanction without save the master data the system doesn't give me the number 46 in the next master data but give me the next number 8in this example 47).
It there a way for not have this jump of number range?
Thanks!
GaetanoHi Gaetano,
This ia a standard thing..even I have experienced it.
Regards,
Chiranjib -
Swtiching Group in the material master number ranges
Can any one please tell me how to switch the group for the material master numbers ranges..We are in the sandbox.We already in the midway .
Thanks
JJgo to the MMNR tcode
hit change group
keep cursor on the material type and go to
Menu - Edit-select element
it will turn in blue
than select your group adn from ment edit-hit assign element group
this will assign new group -
Material Master Number range Problem
Hi Experts,
There is a Group 1 which has ROH assigned...then i changed the assignment,assigned ROH to a
Group 2.
Recently Material Type config was done in different R/3 system and transported to our R/3 system.I did had a look in the TR it had only material type releavnt changes like Authorisation group and S.ref material type (T134 and T134T)
But as a result ROH got reallocated to Group1 as initial.
I had checked the log in MMNR the log shows me the assignment ROH to a Group 2 which i have done as the last change.
No Clue what could have happened,If any one have some idea pls do let me know.
Thanks in advance.
RathaHi Dheeraj
I did found a root cause of the problem.
In Mat.type configuration there is number range code(NRC) 01,02,03 getting recorded.
In our system NRC for ROH was 01,but in other R/3 system NRC for ROH was 02
And when TR came from diff R/3 system our NRC was over written to 02.
Regards
Ratha -
Material master number range flag
Hi
Is it possible to change materials number range flag from external to internal
I need to upload materials to SAP from excel file. At the time of upload planning to use number range flag as external then after upload is completed planning to change to internal.
Please suggest
Thanks
RajuHi,
Try to set the status of the number range from 0001-9999 to "0" through t-code XDN1 and save.
Then go to intervals and change the assignment of numbner to internal.
Hope this may help you............ -
Hello Gurus,
I have Created Many Material Master Number in SAP.
Now I want to Find Out that which Materials are Used in SAP At least In Single transaction and Which Materials are still Unused in SAP.
I am Waiting Your reply.
Regards,
Riten Patel.Dear ritenpatel
MCRE - Material usage analysis - By plant / By material / By component used By order
This report can be used for analysing the actual material usage against plant in manufacturing process.
MC40 & MC41 - Material usage based ABC Analysis
This report will help you in identifying the fast moving, slow moving / non moving items. The report can be executed at the material level / plant level
Regards
Anand -
Material ledger tick in material master
hi
i have created material master Number ABC.
Make changes in material type and activated material ledger. Now ML tick is on all new material master being created its fine.
Question is how I can activate the ML tick on material number ABC which created before activation of material ledger.
regardsHi,
no, It's not a big mistake and it can be solved quickly be SAP Support.
But you can try the following workaround:
1. You can change the material type of the material to a material type managed by value and quantity (txn MMAM).
2. Afterwards, change the customizing of the material type in OMS2 (I assume you've done this already).
3. Finally, you reset the material type again in txn MMAM.
If this does not work or if too many materials are affected, there is no other way than contacting SAP Support.
BR,
Antje -
How to assign customer master number ranges
hi,
sap gurus,
can i know the transaction codes for
all the number ranges which are available in std sap r/3.
can any body help me on this
regards,
balaji.t
09990019711Dear balaji
Following are the number ranges which you can see in SNUM or SNRO.
VN01 - SD Number Range
FBN1 - FI Number range
XDN1 - Customer Naumber Range
CO82 - Production Order Number Range
MMNR - Material Master Number Range
Excise related Objects
J_1IARE1 ARE1 Doc No object based on Series Group
J_1IARE3 ARE3 Doc No object based on Series Group
J_1IBOND Excise Bonding: Bond number object
J_1ICERT Withholding Tax Certificates (India)
J_1ICHLNNO Internal number range for challans
J_1ICONPLA Consolidated PLA serial no. generation
J_1IDEPINV Excise Invoice Number for Depot Invoices
J_1IEXCEXP Export excise invoice number range
J_1IEXCINV Excise invoice number
J_1IEXCLOC Local excise invoice number range
J_1IEXCTST Excise invoice with intervals
J_1IEXINEX Excise invoice number for export
J_1IINTNUM Internally document number to be generated
J_1IINTPR2 Despatch serial number
J_1ILIC Excise Bonding: License number object
J_1IPLA2 PLA part II number range object
J_1IRG1 RG1 Number range object
J_1IRG1_T No. Range for RG1 - Excise group / Material
J_1IRG23A1 RG23A part 1 no. range object
J_1IRG23A2 RG23A part II number range object
J_1IRG23C1 RG23C part I number range object
J_1IRG23C2 RG23C part II number range object
J_1IRG23D Folio Numbers for RG 23D
thanks
G. Lakshmipathi -
How do we create internal No range for material master. In Tcode-MMNR if we do not tickmark external then wheather it means that its internal no range
HI,
If External is not ticked, system will assign the number range maintained in sequence automatically. If you want to maintain alphanumeric number range, you can maintain that in OMS2 for material type.
You can define the Material Master Number Range in transaction MMNR. Click the button Groups to Maintain the Material Type Grouping. Below are those material type that have no number range groups. To assign a group, in the not assigned group, select the Material Type you want to group. Then tick the Group you want to assign and click the menu path Edit -> Assign Element Group.
From the same screen, if you want a new number range intervals, click Group -> Insert Group. If you decided to used an external number range, goto transaction OMS2 and tick the field External no. assignment w/o check.
You have two ways of assigning number range :
Internal number assignment
In this case, a number within the number range interval allowed is assigned by the SAP R/3 System.
External number assignment
Here, the user assigns a number within the number range interval allowed. You can define the intervals for external number assignment numerically and alphanumerically.
You can assign one or more material types to each group.
If you assign just one material type to a group, you can define both an internal and an external number range interval for the material type. If you group together more than one material type, you can define an internal and an external number range interval here too. This allows several material types to have the same number range intervals.
hope it helps.
Edited by: MM Consultant on Jan 13, 2011 3:59 PM -
Change number in material master required steps to use
Hi All.
Thanks in advance sap mm dudes.
Need steps in sap mm material master change number.
creation of change number and usage of change number
Display of list of changes.
Regards.
parameshwarDear Parameshwar,
1.I assume you have created a change number without release key in CC01.
2.In CC02,for the same change number goto object types and include the check box against material for the first 3 check box and
save the change number.
3.Now check in MM02 for any material master changes or I would suggest you to create a new change number with valid from
date as current date,include the settings for material under object types and then check in MM02.
Check and revert.
Regards
Mangalraj.S -
Legacy number in the material master
Dear SAP Guru,
Good day.
We are currently in production support today and we want to understand how a legacy number differs from a material number. As we can see in the material master (Classification View) there is an indicated legacy number there with a corresponding value. Could you further elaborate on how and what is the usage of a legacy number?
Thanks in advance for your help.
Kind regards,
JMTJasmin,
Basically some clients would be interested to track the SAP material number with referance to the Legacy material number, this data would be uploaded during the Cut-over and data conversion to SAP.
I would suggest you look at the Functional/Tehnical specification document for the conversion program which was used for uploading the material master data into SAP, that would give you the business reason and the field mapping details.
Regards,
Prasobh -
List of material number with PO text from material master
I want to get a list of materials number with PO text from material master. Can anybody help ?
The purchase order texts maintained in the material master are stored
as SAPScript text files in tables STXH (header) and STXL (lines). For
material master records:
Field TDOBJECT = 'MATERIAL'
Field TDNAME = material number (MARA-MATNR).
So you should be able to write a small report to extract the data.
Maybe you are looking for
-
Import/Export of XMI models to/from the EMFStore
Hi, Is there a way to import/export the EMF model in XMI format into/from the EMFStore? Appreciate any response! Thank you!
-
Displays - gather windows from 2nd monitor? OR - turn off detected display?
I use my Sony HDTV (960XBR) via HDMI as a 2nd monitor sometimes (also use a 17" LCD sometimes). When not using the Sony for the Mac (like actually watching TV!), the Mac still detects it as a display and allows any program windows I'd placed there to
-
Firewire 800 external drive reccomendations for mavericks time machine?
I think I need a new back up drive after upgrading from Snow Leopard to Mountain Lion to Mavericks. I like using the firewire 800 port so my others are freed up for other peripherals. Any suggestions? I've not been happy with the reminder that the
-
I purchased a pioneer avic-7000nex for 699.99 two weeks ago. Bestbuy priced match with crutchfield and that was awesome! I received a email confirmation saying that the item is back ordered and about two weeks later my order was canceled just a few d
-
Can N55-M160L3-V2 and N55-DL2 install in the same chassis of 5548UP?
Don't know why, but I am seeing Hw not supported on M160L3 module, I am running 5.2(1)N1, the OS should be able to support it, and I also have license installed.