Unused Rs.1100/- may be refunded

I mistakenly paid Rs.1100/- for enhancing Internal Storage up-gradation, but observed no benefit made available. I, therefore, request you to please refund my money.
With regards,
Sankar Pramanik
<Email Edited By Host>

Most of the people on these forums, including myself, are fellow users - you're not talking to iTunes Support here. I've asked the hosts to remove your email address from your post.
iCloud storage is for online backups, it doesn't increase the amount of storage that is on a device.
You can contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Similar Messages

  • Does anyone else think unused broadband minutes should be refunded or rolled over?

    I just started using Verizon a little over a month ago.  I love the fact that the 4G LTE is faster than my satalite internet.  What i dont like is the fact that i pay $80 for 10GB of Data, and if i dont use it all i lose it yet if i go over 10 i pay for it...sounds like a lose lose situation.  Why not make it even and rollover any unused data, or credit it back to us on our bills. 
    So this all stems from the fact that on my 1st bill I used around 5GB of data....Yet 5- 7 days into my second month I some how managed to use 12.2GB.  Nothing was done differently.  No one else had access.  No major DLing took place....No streaming....etc... So i started delving into the bill and that is when and where i learned i only used 5 GB last month...and now i am paying $10/GB for every GB i use...if i already payed for 10 GB last month and only used 5 and now i am at 13 GB....i think in a fair system i should still have another 2 FREE(already payed for) GB coming..... Am I being unreasonable? Is this Idea way out there? Input?

    That would be nice.  I am on the 10gb plan and some months I only use 7-8 GB..  However in Feburary I went over the 10Gb limit by a very small margin on the last day of the billing cycle. I got hit with the $10 fee yet did not have the oppertunity to use the vast majority of data I paid for.    It would add value to the customer if the data allotments would carry over. Of course Verizon would lose the overage charges so I doubt this will ever occur.

  • How to refund for the in-app-purchase of Subway Surfer? thanks a lot

    Someone had used my apple account to purchase a total of HKD 398+798 (in-app-purchase) of subway surfer. May I refund ?

    I can see there are so many cases of accidental purchase @ in-app-puchase. This is a kind of cheating apple customers.. Must be stopped with immediate effect and who ever want to purchase something s/he shold be asked to inserrt all payment details as and when required and confirm as we normally do for all other online purchases...

  • Xorg doesn't start some "FRAMEBUFFER" problem

    I would like to ask you to help me. After two days I'm down. I've read some topics and hints but somehow maybe because I'm so nervous now I cannot concentrate. ( like try setting vesafb - video=vesafb but where?:oops: Every time I try to start X I get this message:
    "Cannot run in framebuffer mode. Please specify bus IDs for all framebuffer devices."
    and then some
    "fatal IO error 104(connection reset by peer)on X server "0.0" "
    I'm using Xorg 6.8.2.0., Nvidia driver{pacman -sy nvidia},
    kernel26 2.6.12.2-1. :oops:
    Please help.
      :cry:

    As has been requested before here are the files - first Xorg.0.log
    X Window System Version 6.8.2
    Release Date: 9 February 2005
    X Protocol Version 11, Revision 0, Release 6.8.2
    Build Operating System: Linux 2.6.10-ARCH i686 [ELF]
    Current Operating System: Linux myhost 2.6.12-ARCH #1 SMP Fri Jul 1 11:55:48 PDT 2005 i686
    Build Date: 16 February 2005
        Before reporting problems, check http://wiki.X.Org
        to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 16 08:32:49 2005
    (EE) Unable to locate/open config file
    (II) Module ABI versions:
        X.Org ANSI C Emulation: 0.2
        X.Org Video Driver: 0.7
        X.Org XInput driver : 0.4
        X.Org Server Extension : 0.2
        X.Org Font Renderer : 0.4
    (II) Loader running on linux
    (II) LoadModule: "bitmap"
    (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
    (II) Module bitmap: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
    (II) Loading font Bitmap
    (II) LoadModule: "pcidata"
    (II) Loading /usr/X11R6/lib/modules/libpcidata.a
    (II) Module pcidata: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.7
    (++) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 1106,3189 card 1458,5000 rev 00 class 06,00,00 hdr 00
    (II) PCI: 00:01:0: chip 1106,b168 card 0000,0000 rev 00 class 06,04,00 hdr 01
    (II) PCI: 00:0a:0: chip 1033,00e7 card 1033,00ce rev 01 class 0c,00,10 hdr 00
    (II) PCI: 00:0b:0: chip 3388,0021 card 0000,0000 rev 13 class 06,04,00 hdr 01
    (II) PCI: 00:0f:0: chip 105a,5275 card 1458,b001 rev 01 class 01,04,85 hdr 00
    (II) PCI: 00:10:0: chip 1106,3038 card 1458,5004 rev 80 class 0c,03,00 hdr 80
    (II) PCI: 00:10:1: chip 1106,3038 card 1458,5004 rev 80 class 0c,03,00 hdr 80
    (II) PCI: 00:10:2: chip 1106,3038 card 1458,5004 rev 80 class 0c,03,00 hdr 80
    (II) PCI: 00:10:3: chip 1106,3104 card 1458,5004 rev 82 class 0c,03,20 hdr 00
    (II) PCI: 00:11:0: chip 1106,3177 card 1458,5001 rev 00 class 06,01,00 hdr 80
    (II) PCI: 00:11:1: chip 1106,0571 card 1458,5002 rev 06 class 01,01,8a hdr 00
    (II) PCI: 00:13:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
    (II) PCI: 01:00:0: chip 10de,00f3 card 1462,9883 rev a2 class 03,00,00 hdr 00
    (II) PCI: 02:08:0: chip 1013,6003 card 1681,a012 rev 01 class 04,01,00 hdr 00
    (II) PCI: 02:09:0: chip 11c1,5811 card 1681,a012 rev 04 class 0c,00,10 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
        [0] -1    0    0x00000000 - 0x0000ffff (0x10000) IX
    (II) Bus 0 non-prefetchable memory range:
        [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B]
    (II) Bus 0 prefetchable memory range:
        [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
    (II) Bus 1 non-prefetchable memory range:
        [0] -1    0    0xe8000000 - 0xeaffffff (0x3000000) MX[B]
    (II) Bus 1 prefetchable memory range:
        [0] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:11:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
    (II) Bus 2 non-prefetchable memory range:
        [0] -1    0    0xeb000000 - 0xeb1fffff (0x200000) MX[B]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (--) PCI:*(1:0:0) nVidia Corporation unknown chipset (0x00f3) rev 162, Mem @ 0xe8000000/24, 0xd0000000/28, 0xe9000000/24
    xf86AutoConfig: Primary PCI is 1:0:0
    Running "/usr/X11R6/bin/getconfig -X 60802000 -I /etc/X11,/usr/X11R6/etc/X11,/usr/X11R6/lib/modules,/usr/X11R6/lib/X11/getconfig -v 0x10de -d 0x00f3 -r 0xa2 -s 0x1462 -b 0x9883 -c 0x0300"
    New driver is "nv"
    (==) Using default built-in configuration (53 lines)
    (==) --- Start of built-in configuration ---
        Section "Module"
            Load    "extmod"
            Load    "dbe"
            Load    "glx"
            Load    "freetype"
        EndSection
        Section "Monitor"
            Identifier    "Builtin Default Monitor"
            Option    "TargetRefresh"    "75.0"
        EndSection
        Section "Device"
            Identifier    "Builtin Default nv Device 0"
            Driver    "nv"
        EndSection
        Section "Screen"
            Identifier    "Builtin Default nv Screen 0"
            Device    "Builtin Default nv Device 0"
            Monitor    "Builtin Default Monitor"
        EndSection
        Section "Device"
            Identifier    "Builtin Default fbdev Device 0"
            Driver    "fbdev"
        EndSection
        Section "Screen"
            Identifier    "Builtin Default fbdev Screen 0"
            Device    "Builtin Default fbdev Device 0"
            Monitor    "Builtin Default Monitor"
        EndSection
        Section "Device"
            Identifier    "Builtin Default vesa Device 0"
            Driver    "vesa"
        EndSection
        Section "Screen"
            Identifier    "Builtin Default vesa Screen 0"
            Device    "Builtin Default vesa Device 0"
            Monitor    "Builtin Default Monitor"
        EndSection
        Section "Device"
            Identifier    "Builtin Default vga Device 0"
            Driver    "vga"
        EndSection
        Section "Screen"
            Identifier    "Builtin Default vga Screen 0"
            Device    "Builtin Default vga Device 0"
            Monitor    "Builtin Default Monitor"
        EndSection
        Section "ServerLayout"
            Identifier    "Builtin Default Layout"
            Screen    "Builtin Default nv Screen 0"
            Screen    "Builtin Default fbdev Screen 0"
            Screen    "Builtin Default vesa Screen 0"
            Screen    "Builtin Default vga Screen 0"
        EndSection
    (==) --- End of built-in configuration ---
    (==) ServerLayout "Builtin Default Layout"
    (**) |-->Screen "Builtin Default nv Screen 0" (0)
    (**) |   |-->Monitor "Builtin Default Monitor"
    (**) |   |-->Device "Builtin Default nv Device 0"
    (**) |-->Screen "Builtin Default fbdev Screen 0" (1)
    (**) |   |-->Monitor "Builtin Default Monitor"
    (**) |   |-->Device "Builtin Default fbdev Device 0"
    (**) |-->Screen "Builtin Default vesa Screen 0" (2)
    (**) |   |-->Monitor "Builtin Default Monitor"
    (**) |   |-->Device "Builtin Default vesa Device 0"
    (**) |-->Screen "Builtin Default vga Screen 0" (3)
    (**) |   |-->Monitor "Builtin Default Monitor"
    (**) |   |-->Device "Builtin Default vga Device 0"
    (==) |-->Input Device "<default pointer>"
    (==) |-->Input Device "<default keyboard>"
    (==) Keyboard: CustomKeycode disabled
    (WW) The core pointer device wasn't specified explicitly in the layout.
        Using the default mouse configuration.
    (WW) The core keyboard device wasn't specified explicitly in the layout.
        Using the default keyboard configuration.
    (WW) No FontPath specified.  Using compiled-in default.
    (==) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
    (==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
    (==) ModulePath set to "/usr/X11R6/lib/modules"
    (WW) Open APM failed (/dev/apm_bios) (No such file or directory)
    (II) Addressable bus resource ranges are
        [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B]
        [1] -1    0    0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) OS-reported resource ranges:
        [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
        [6] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
    (II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
    (II) Active PCI resource ranges:
        [0] -1    0    0xeb101000 - 0xeb101fff (0x1000) MX[B]
        [1] -1    0    0xeb000000 - 0xeb0fffff (0x100000) MX[B]
        [2] -1    0    0xeb100000 - 0xeb100fff (0x1000) MX[B]
        [3] -1    0    0xeb206000 - 0xeb2060ff (0x100) MX[B]
        [4] -1    0    0xeb205000 - 0xeb2050ff (0x100) MX[B]
        [5] -1    0    0xeb200000 - 0xeb203fff (0x4000) MX[B]
        [6] -1    0    0xeb204000 - 0xeb204fff (0x1000) MX[B]
        [7] -1    0    0xe0000000 - 0xdfffffff (0x0) MX[B]O
        [8] -1    0    0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B)
        [9] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
        [10] -1    0    0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
        [11] -1    0    0x0000e400 - 0x0000e4ff (0x100) IX[B]
        [12] -1    0    0x0000e000 - 0x0000e00f (0x10) IX[B]
        [13] -1    0    0x0000dc00 - 0x0000dc1f (0x20) IX[B]
        [14] -1    0    0x0000d800 - 0x0000d81f (0x20) IX[B]
        [15] -1    0    0x0000d400 - 0x0000d41f (0x20) IX[B]
        [16] -1    0    0x0000d000 - 0x0000d00f (0x10) IX[B]
        [17] -1    0    0x0000cc00 - 0x0000cc03 (0x4) IX[B]
        [18] -1    0    0x0000c800 - 0x0000c807 (0x8) IX[B]
        [19] -1    0    0x0000c400 - 0x0000c403 (0x4) IX[B]
        [20] -1    0    0x0000c000 - 0x0000c007 (0x8) IX[B]
    (II) Active PCI resource ranges after removing overlaps:
        [0] -1    0    0xeb101000 - 0xeb101fff (0x1000) MX[B]
        [1] -1    0    0xeb000000 - 0xeb0fffff (0x100000) MX[B]
        [2] -1    0    0xeb100000 - 0xeb100fff (0x1000) MX[B]
        [3] -1    0    0xeb206000 - 0xeb2060ff (0x100) MX[B]
        [4] -1    0    0xeb205000 - 0xeb2050ff (0x100) MX[B]
        [5] -1    0    0xeb200000 - 0xeb203fff (0x4000) MX[B]
        [6] -1    0    0xeb204000 - 0xeb204fff (0x1000) MX[B]
        [7] -1    0    0xe0000000 - 0xdfffffff (0x0) MX[B]O
        [8] -1    0    0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B)
        [9] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
        [10] -1    0    0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
        [11] -1    0    0x0000e400 - 0x0000e4ff (0x100) IX[B]
        [12] -1    0    0x0000e000 - 0x0000e00f (0x10) IX[B]
        [13] -1    0    0x0000dc00 - 0x0000dc1f (0x20) IX[B]
        [14] -1    0    0x0000d800 - 0x0000d81f (0x20) IX[B]
        [15] -1    0    0x0000d400 - 0x0000d41f (0x20) IX[B]
        [16] -1    0    0x0000d000 - 0x0000d00f (0x10) IX[B]
        [17] -1    0    0x0000cc00 - 0x0000cc03 (0x4) IX[B]
        [18] -1    0    0x0000c800 - 0x0000c807 (0x8) IX[B]
        [19] -1    0    0x0000c400 - 0x0000c403 (0x4) IX[B]
        [20] -1    0    0x0000c000 - 0x0000c007 (0x8) IX[B]
    (II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
        [6] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
    (II) All system resource ranges:
        [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1    0    0xeb101000 - 0xeb101fff (0x1000) MX[B]
        [6] -1    0    0xeb000000 - 0xeb0fffff (0x100000) MX[B]
        [7] -1    0    0xeb100000 - 0xeb100fff (0x1000) MX[B]
        [8] -1    0    0xeb206000 - 0xeb2060ff (0x100) MX[B]
        [9] -1    0    0xeb205000 - 0xeb2050ff (0x100) MX[B]
        [10] -1    0    0xeb200000 - 0xeb203fff (0x4000) MX[B]
        [11] -1    0    0xeb204000 - 0xeb204fff (0x1000) MX[B]
        [12] -1    0    0xe0000000 - 0xdfffffff (0x0) MX[B]O
        [13] -1    0    0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B)
        [14] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
        [15] -1    0    0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
        [16] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
        [17] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
        [18] -1    0    0x0000e400 - 0x0000e4ff (0x100) IX[B]
        [19] -1    0    0x0000e000 - 0x0000e00f (0x10) IX[B]
        [20] -1    0    0x0000dc00 - 0x0000dc1f (0x20) IX[B]
        [21] -1    0    0x0000d800 - 0x0000d81f (0x20) IX[B]
        [22] -1    0    0x0000d400 - 0x0000d41f (0x20) IX[B]
        [23] -1    0    0x0000d000 - 0x0000d00f (0x10) IX[B]
        [24] -1    0    0x0000cc00 - 0x0000cc03 (0x4) IX[B]
        [25] -1    0    0x0000c800 - 0x0000c807 (0x8) IX[B]
        [26] -1    0    0x0000c400 - 0x0000c403 (0x4) IX[B]
        [27] -1    0    0x0000c000 - 0x0000c007 (0x8) IX[B]
    (II) LoadModule: "extmod"
    (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
    (II) Module extmod: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.2
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
    (II) Module dbe: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.2
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
        compiled for 4.0.2, module version = 1.0.7676
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.1
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
        compiled for 6.8.2, module version = 2.1.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
    (II) Loading font FreeType
    (II) LoadModule: "nv"
    (II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
    (II) Module nv: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.1
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 0.7
    (II) LoadModule: "fbdev"
    (II) Loading /usr/X11R6/lib/modules/drivers/fbdev_drv.o
    (II) Module fbdev: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 0.1.0
        ABI class: X.Org Video Driver, version 0.7
    (II) LoadModule: "vesa"
    (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.o
    (II) Module vesa: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 0.7
    (II) LoadModule: "vga"
    (II) Loading /usr/X11R6/lib/modules/drivers/vga_drv.o
    (II) Module vga: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 4.0.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 0.7
    (II) LoadModule: "mouse"
    (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
    (II) Module mouse: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.4
    (II) LoadModule: "keyboard"
    (II) Loading /usr/X11R6/lib/modules/input/keyboard_drv.o
    (II) Module keyboard: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.4
    (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
        Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
        Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
        GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
        GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
        Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
        GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
        GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
        GeForce4 440 Go 64M, Quadro4 NVS, Quadro4 500 GoGL,
        GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
        GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
        GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
        Quadro4 280 NVS, Quadro4 380 XGL, Quadro NVS 50 PCI, GeForce4 448 Go,
        GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
        GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
        0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
        Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
        GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
        Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
        GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
        GeForce FX 5600 Ultra, GeForce FX 5600, 0x0313, GeForce FX 5600SE,
        0x0316, 0x0317, GeForce FX Go5600, GeForce FX Go5650,
        Quadro FX Go700, 0x031D, 0x031E, 0x031F, GeForce FX 5200,
        GeForce FX 5200 Ultra, GeForce FX 5200, GeForce FX 5200SE,
        GeForce FX Go5200, GeForce FX Go5250, GeForce FX 5500,
        GeForce FX 5100, GeForce FX Go5200 32M/64M, 0x0329,
        Quadro NVS 280 PCI, Quadro FX 500/600 PCI, GeForce FX Go53xx Series,
        GeForce FX Go5100, 0x032F, GeForce FX 5900 Ultra, GeForce FX 5900,
        GeForce FX 5900XT, GeForce FX 5950 Ultra, Quadro FX 700,
        GeForce FX 5900ZT, Quadro FX 3000, GeForce FX 5700 Ultra,
        GeForce FX 5700, GeForce FX 5700LE, GeForce FX 5700VE, 0x0345,
        GeForce FX Go5700, GeForce FX Go5700, 0x0349, 0x034B,
        Quadro FX Go1000, Quadro FX 1100, 0x034F, GeForce 6800 Ultra,
        GeForce 6800, GeForce 6800 LE, 0x0043, GeForce 6800 GT, 0x0049,
        Quadro FX 4000, Quadro FX 4400, 0x00C0, 0x00C1, GeForce 6800 LE,
        0x00C8, 0x00C9, 0x00CC, 0x00CE, GeForce 6600 GT, GeForce 6600,
        0x0142, 0x0143, GeForce Go 6600, GeForce 6610 XL,
        GeForce Go 6600 TE/6200 TE, 0x0147, GeForce Go 6600, 0x0149, 0x014B,
        0x014C, 0x014D, Quadro FX 540, GeForce 6200, 0x0160, 0x0166, 0x0210,
        0x0211, 0x021D, 0x021E
    (II) FBDEV: driver for framebuffer: fbdev, afb
    (II) VESA: driver for VESA chipsets: vesa
    (II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
    (II) Primary Device is: PCI 01:00:0
    (--) Assigning device section with no busID to primary device
    (--) Chipset GeForce 6200 found
    (II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1    0    0xeb101000 - 0xeb101fff (0x1000) MX[B]
        [6] -1    0    0xeb000000 - 0xeb0fffff (0x100000) MX[B]
        [7] -1    0    0xeb100000 - 0xeb100fff (0x1000) MX[B]
        [8] -1    0    0xeb206000 - 0xeb2060ff (0x100) MX[B]
        [9] -1    0    0xeb205000 - 0xeb2050ff (0x100) MX[B]
        [10] -1    0    0xeb200000 - 0xeb203fff (0x4000) MX[B]
        [11] -1    0    0xeb204000 - 0xeb204fff (0x1000) MX[B]
        [12] -1    0    0xe0000000 - 0xdfffffff (0x0) MX[B]O
        [13] -1    0    0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B)
        [14] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
        [15] -1    0    0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
        [16] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
        [17] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
        [18] -1    0    0x0000e400 - 0x0000e4ff (0x100) IX[B]
        [19] -1    0    0x0000e000 - 0x0000e00f (0x10) IX[B]
        [20] -1    0    0x0000dc00 - 0x0000dc1f (0x20) IX[B]
        [21] -1    0    0x0000d800 - 0x0000d81f (0x20) IX[B]
        [22] -1    0    0x0000d400 - 0x0000d41f (0x20) IX[B]
        [23] -1    0    0x0000d000 - 0x0000d00f (0x10) IX[B]
        [24] -1    0    0x0000cc00 - 0x0000cc03 (0x4) IX[B]
        [25] -1    0    0x0000c800 - 0x0000c807 (0x8) IX[B]
        [26] -1    0    0x0000c400 - 0x0000c403 (0x4) IX[B]
        [27] -1    0    0x0000c000 - 0x0000c007 (0x8) IX[B]
    (II) Loading sub module "fbdevhw"
    (II) LoadModule: "fbdevhw"
    (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
    (II) Module fbdevhw: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 0.0.2
        ABI class: X.Org Video Driver, version 0.7
    (II) FBDEV(1): using default device
    (--) Assigning device section with no busID to primary device
    (--) Chipset vesa found
    (--) Assigning device section with no busID to primary device
    (--) Chipset generic found
    Fatal server error:
    Cannot run in framebuffer mode. Please specify busIDs        for all framebuffer devices
    Please consult the The X.Org Foundation support
         at http://wiki.X.Org
    for help.
    Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    and as second [b]xorg.conf from my home folder:
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5x) man page for details about the format of
    # this file.
    # Module section -- this  section  is used to specify
    # which dynamically loadable modules to load.
    Section "Module"
    # This loads the DBE extension module.
        Load        "dbe"      # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
        SubSection  "extmod"
          Option    "omit xfree86-dga"   # don't initialise the DGA extension
        EndSubSection
    # This loads the font modules
        Load        "type1"
    #    Load        "speedo"
        Load        "freetype"
    #    Load        "xtt"
    # This loads the GLX module
        Load       "glx"
    # This loads the DRI module
    #    Load       "dri"
    EndSection
    # Files section.  This allows default font and rgb paths to be set
    Section "Files"
    # The location of the RGB database.  Note, this is the name of the
    # file minus the extension (like ".txt" or ".db").  There is normally
    # no need to change the default.
        RgbPath    "/usr/X11R6/lib/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
        FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
        FontPath   "/usr/X11R6/lib/X11/fonts/TTF/"
        FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
        FontPath   "/usr/X11R6/lib/X11/fonts/CID/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
        FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
        FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    #    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    #    FontPath   "/usr/X11R6/lib/X11/fonts/TrueType/"
    #    FontPath   "/usr/X11R6/lib/X11/fonts/freefont/"
    # The module search path.  The default path is shown here.
    #    ModulePath "/usr/X11R6/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #    Option "NoTrapSignals"
    # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12).  This allows clients to receive these key
    # events.
    #    Option "DontVTSwitch"
    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #    Option "DontZap"
    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #    Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    #    Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    #    Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    #    Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    #    Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
        Identifier    "Keyboard1"
        Driver    "kbd"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    #    Option     "Protocol"      "Xqueue"
        Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    #    Option    "Xleds"      "1 2 3"
    #    Option "LeftAlt"     "Meta"
    #    Option "RightAlt"    "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults).  For example, for a non-U.S.
    # keyboard, you will probably want to use:
    #    Option "XkbModel"    "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    #    Option "XkbModel"    "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    #    Option "XkbLayout"   "de"
    # or:
    #    Option "XkbLayout"   "de"
    #    Option "XkbVariant"  "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    #    Option "XkbOptions"  "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    #    Option "XkbRules"    "xorg"
    #    Option "XkbModel"    "pc105"
    #    Option "XkbLayout"   "us"
    #    Option "XkbVariant"  ""
    #    Option "XkbOptions"  ""
    #    Option "XkbDisable"
        Option "XkbRules"    "xorg"
        Option "XkbModel"    "pc104"
        Option "XkbLayout"    "us"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
        Identifier    "Mouse1"
        Driver    "mouse"
        Option "Protocol"    "ExplorerPS/2"
        Option "Device"      "/dev/psaux"
        Option "ZAxisMapping" "4 5"
        Option "Buttons"       "5"
    # Mouse-speed setting for PS/2 mouse.
    #    Option "Resolution"    "256"
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.
    #    Option "Protocol"    "Xqueue"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    #    Option "BaudRate"    "9600"
    #    Option "SampleRate"    "150"
    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    #    Option "Emulate3Buttons"
    #    Option "Emulate3Timeout"    "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    #    Option "ChordMiddle"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices.  This is for example only.  Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    #    Identifier  "Mouse2"
    #    Driver      "mouse"
    #    Option      "Protocol"      "MouseMan"
    #    Option      "Device"        "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    #    Identifier "spaceball"
    #    Driver     "magellan"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    #    Identifier "spaceball2"
    #    Driver     "spaceorb"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    #    Identifier "touchscreen0"
    #    Driver     "microtouch"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "1412"
    #    Option     "MaxX"          "15184"
    #    Option     "MinY"          "15372"
    #    Option     "MaxY"          "1230"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    #    Identifier "touchscreen1"
    #    Driver     "elo2300"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "231"
    #    Option     "MaxX"          "3868"
    #    Option     "MinY"          "3858"
    #    Option     "MaxY"          "272"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonThreshold"       "17"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
        Identifier  "ViewSonic 21PS"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
        HorizSync   30-82
    #    HorizSync    30-64         # multisync
    #    HorizSync    31.5, 35.2    # multiple fixed sync frequencies
    #    HorizSync    15-25, 30-50  # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
        VertRefresh 50-160
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    Section "Device"
        Identifier    "Standard VGA"
        VendorName    "Unknown"
        BoardName    "Unknown"
    # The chipset line is optional in most cases.  It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    #    Chipset    "generic"
    # The Driver line must be present.  When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module.  Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
        Driver     "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for.  When this line isn't present, a device
    # section can only match up with the primary video device.  For PCI
    # devices a line like the following could be used.  This line should not
    # normally be included unless there is more than one video device
    # intalled.
    #    BusID      "PCI:0:10:0"
    #    VideoRam    256
    #    Clocks    25.2 28.3
    EndSection
    # Device configured by xorgconfig:
    Section "Device"
        Identifier  "** NVIDIA (generic)                   [nv]"
        Driver      "nvidia"
        #VideoRam    131072
        # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present.  Each describes
    # the configuration of a single screen.  A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
        Identifier  "Screen 1"
        Device      "** NVIDIA (generic)                   [nv]"
        Monitor     "ViewSonic 21PS"
        DefaultDepth 24
        Subsection "Display"
            Depth       8
            Modes       "1024x768" "800x600" "640x480" "640x400"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       16
            Modes       "1024x768" "800x600" "640x480" "640x400"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       24
            Modes       "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present.  Each describes
    # the way multiple screens are organised.  A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option.  In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
        Identifier  "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens.  The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen.  In this example, screen 2 is located to the
    # right of screen 1.
        Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used.  Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
        InputDevice "Mouse1" "CorePointer"
        InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    # Section "DRI"
    #    Mode 0666
    # EndSection
    I mentioned that I've changed from 4xAGP to 8xAGP nvidia card, bios is set correctly and updated. Yesterday evening I tried some different resolution setups in gruub's menu.lst but without any succes for vga=791;792 etc. only video=vesafb works. Another thing that seems to be strange my mouse wheel doesn't function as well and the setup is the same since the day a installed Arch the first time what remains me of my Arch's  one year aniversary - strange   
    :cry:
    Thanks for any help in advance.
    tony[/u]

  • My credit-I had +£6.00 in my UK account and as I a...

    Dear Sir/Ms.,
                   I have account with you for along time in London England. It's been a while since I used your sevices. The last time I used to call,I had a credit of £6.00+.
    I am in USA and trying to use Skype,I been asked to pay again. When I opened the Account I made pervision that when my credit reach £1.00 it should be topped up to £10.00.
    My email address is [e-mail removed for privacy and security],uk and my Users name is [removed for security]
    With regards,
    Ramesh kapoor

    Hello and welcome to the Skype Community.
    Your account shows a credit balance of GBP 6.16 which was a refund of unused credit on May 5th 2014. Your credit purchase of GBP 10.00 made on May 1st 2015 via PayPal has been sent to our payment provider for approval.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • New install, when I startx, nothing moves

    I installed arch on an old laptop.
    I installed xorg and fluxbox.
    when I startx, the keyboard and touchpad do nothing. I have to reboot.
    here is xorg.conf:
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    Section "Module"
    Load "glx"
    Load "freetype"
    Load "synaptics"
    # This loads the DBE extension module.
    Load "dbe" # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    # This loads the font modules
    # Load "type1"
    Load "freetype"
    # Load "xtt"
    # This loads the GLX module
    # Load "glx"
    # This loads the DRI module
    # Load "dri"
    EndSection
    # Files section. This allows default font and rgb paths to be set
    Section "ServerFlags"
    Option "AutoAddDevices" "False"
    EndSection
    Section "Files"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    # FontPath "/usr/share/fonts/TTF"
    # FontPath "/usr/share/fonts/Type1"
    # FontPath "/usr/lib/X11/fonts/local/"
    # FontPath "/usr/lib/X11/fonts/misc/"
    # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    # FontPath "/usr/lib/X11/fonts/75dpi/"
    # FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    # Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.
    # Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    # Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    # Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    # Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    # Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    # Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    # Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Option "XkbRules" "xorg"
    Option "XkbModel" "latitude"
    Option "XkbLayout" "us"
    EndSection
    Section "InputDevice"
    Identifier "SynapticsTouchpad"
    Driver "synaptics"
    Option "AlwaysCore" "true" # send events to CorePointer
    #Option "Device" "/dev/input/mice"
    Option "Device" "/dev/psaux"
    Option "Protocol" "auto-dev"
    Option "SHMConfig" "false" # configurable at runtime? security risk
    Option "LeftEdge" "1700" # x coord left
    Option "RightEdge" "5300" # x coord right
    Option "TopEdge" "1700" # y coord top
    Option "BottomEdge" "4200" # y coord bottom
    Option "FingerLow" "25" # pressure below this level triggers release
    Option "FingerHigh" "30" # pressure above this level triggers touch
    Option "MaxTapTime" "180" # max time in ms for detecting tap
    Option "VertEdgeScroll" "true" # enable vertical scroll zone
    Option "HorizEdgeScroll" "true" # enable horizontal scroll zone
    Option "CornerCoasting" "true" # enable continuous scroll with finger in corner
    Option "CoastingSpeed" "0.30" # corner coasting speed
    Option "VertScrollDelta" "100" # edge-to-edge scroll distance of the vertical scroll
    Option "HorizScrollDelta" "100" # edge-to-edge scroll distance of the horizontal scroll
    Option "MinSpeed" "0.10" # speed factor for low pointer movement
    Option "MaxSpeed" "0.60" # maximum speed factor for fast pointer movement
    Option "AccelFactor" "0.0020" # acceleration factor for normal pointer movements
    Option "VertTwoFingerScroll" "true" # vertical scroll anywhere with two fingers
    Option "HorizTwoFingerScroll" "true" # horizontal scroll anywhere with two fingers
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "Auto" # Auto detect
    Option "Device" "/dev/input/mice"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
    Identifier "My Monitor"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync 31.5 - 64.3
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-60
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName "Unknown"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    EndSection
    # Device configured by xorgconfig:
    Section "Device"
    Identifier "** NeoMagic (generic) [neomagic]"
    Driver "neomagic"
    #VideoRam 2048
    # Chipset "NM2160"
    # IOBase 0xfea00000
    # MemBase 0xfd000000
    # VideoRam 2048
    # DacSpeed 90
    # Option "linear"
    # Option "nolinear"
    # Option "sw_cursor"
    # Option "hw_cursor"
    # Option "no_accel"
    # Option "intern_disp"
    # Option "extern_disp"
    # Option "mmio"
    # Option "no_mmio"
    # Option "lcd_center"
    # Option "no_stretch"
    # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "** NeoMagic (generic) [neomagic]"
    Monitor "My Monitor"
    DefaultDepth 24
    Subsection "Display"
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    InputDevice "USB Mouse" "CorePointer"
    InputDevice "SynapticsTouchpad" "SendCoreEvents
    EndSection
    # Section "DRI"
    # Mode 0666
    # EndSection

    Redroar wrote:
    Edit: foolish me. I thought I had read your entire xorg.conf, and yet missed the very obvious top. Should've known better. I think it's time to go to sleep.
    Edit2: maybe unfoolish me. You have 2 ServerFlags sections. I don't know, maybe get rid of the big spanning one that has loads of comments in it. I wonder if the AutoAddDevices thing simply isn't getting read because of a syntax error?
    That worked!
    Thanks.

  • The mouse is frozed

    hey
    i have the mouse Logitech mx500.
    i worked according the wiki (http://wiki.archlinux.org/index.php/Get … ns_Working)
    about month ago the mouse start to frozed.
    any idea?
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings: version 1.0 (buildmeister@builder3) Wed Jun 13 18:40:26 PDT 2007
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    # Files section. This allows default font and rgb paths to be set
    # Server flags section.
    # Input devices
    # Core keyboard's InputDevice section
    # Core Pointer's InputDevice section
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    # Device configured by xorgconfig:
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    # Section "DRI"
    # Mode 0666
    # EndSection
    Section "ServerLayout"
    # The Identifier line must be present
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    Identifier "Simple Layout"
    Screen 0 "Screen0" 0 0
    InputDevice "Evdev Mouse" "CorePointer"
    ##InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    Section "Files"
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.
    # RgbPath "/usr/share/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    # FontPath "/usr/lib/X11/fonts/local/"
    # FontPath "/usr/lib/X11/fonts/misc/"
    # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Speedo/"
    # FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    # FontPath "/usr/lib/X11/fonts/75dpi/"
    # FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    # This loads the DBE extension module.
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    # This loads the font modules
    # Load "type1"
    # This loads the GLX module
    Load "glx"
    # This loads the DRI module
    # Load "dri"
    Load "dbe" # Double buffer extension
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    Load "freetype"
    # Load "xtt"
    EndSection
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    # Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.
    # Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    # Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    # Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    # Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    # Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    # Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    # Option "AllowNonLocalModInDev"
    Option "Xinerama" "0"
    EndSection
    Section "InputDevice"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    # Option "Protocol" "Xqueue"
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    ### Identifier "Keyboard1"
    ### Driver "kbd"
    ### Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    ### Option "XkbRules" "xorg"
    ### Option "XkbModel" "pc101"
    ### Option "XkbLayout" "us"
    ### Option "XkbVariant" "uss"
    Identifier "Keyboard1"
    Driver "kbd"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us,il"
    Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll"
    EndSection
    ##Section "InputDevice"
    # Identifier and driver
    # the following line.
    # Option "Protocol" "Xqueue"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    ## Identifier "Mouse1"
    ## Driver "mouse"
    ## Option "Protocol" "Auto" # Auto detect
    # # Option "Device" "/dev/input/mice"
    # When using XQUEUE, comment out the above two lines, and uncomment
    ## Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    ##EndSection
    Section "InputDevice"
    Identifier "Evdev Mouse"
    Driver "evdev"
    Option "Name" "Logitech USB-PS/2 Optical Mouse"
    Option "CorePointer"
    EndSection
    #Section "InputDevice"
    # Identifier "Mouse1"
    # Driver "mouse"
    # Option "Protocol" "Auto" # Auto detect
    # Option "Device" "/dev/input/mice"
    # When using XQUEUE, comment out the above two lines, and uncomment
    # Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    #EndSection
    Section "Monitor"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    Identifier "793df"
    HorizSync 31.5 - 64.3
    VertRefresh 50.0 - 70.0
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "DELL 2007WFP"
    HorizSync 30.0 - 83.0
    VertRefresh 56.0 - 76.0
    EndSection
    Section "Device"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    Identifier "Standard VGA"
    Driver "vga"
    VendorName "Unknown"
    BoardName "Unknown"
    EndSection
    Section "Device"
    # unsupported card
    #VideoRam 262144
    # Insert Clocks lines here if appropriate
    Identifier "7600ga"
    Driver "nvidia"
    EndSection
    Section "Device"
    Identifier "Videocard0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 7600 GS"
    EndSection
    Section "Screen"
    Identifier "Screen 1"
    Device "7600ga"
    Monitor "793df"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "Screen"
    # Removed Option "metamodes" "1024x768_85 +0+0; 1024x768 +0+0; 800x600 +0+0; 640x480 +0+0"
    Identifier "Screen0"
    Device "Videocard0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "metamodes" "1680x1050_60 +0+0; 800x600 +0+0; 640x480 +0+0"
    EndSection
    dmesg
    Linux version 2.6.23-ARCH (root@T-POWA-LX) (gcc version 4.2.2) #1 SMP PREEMPT Sun Nov 18 07:43:05 UTC 2007
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
    BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
    BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
    BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
    BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    1150MB HIGHMEM available.
    896MB LOWMEM available.
    found SMP MP-table at 000f5940
    Entering add_active_range(0, 0, 524000) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 229376
    HighMem 229376 -> 524000
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 524000
    On node 0 totalpages: 524000
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 1760 pages used for memmap
    Normal zone: 223520 pages, LIFO batch:31
    HighMem zone: 2301 pages used for memmap
    HighMem zone: 292323 pages, LIFO batch:31
    Movable zone: 0 pages used for memmap
    DMI 2.4 present.
    ACPI: RSDP 000F7620, 0024 (r2 Nvidia)
    ACPI: XSDT 7FEE30C0, 0044 (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
    ACPI: FACP 7FEEC480, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0)
    ACPI: DSDT 7FEE3240, 91E0 (r1 NVIDIA AWRDACPI 1000 MSFT 3000000)
    ACPI: FACS 7FEE0000, 0040
    ACPI: HPET 7FEEC680, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98)
    ACPI: MCFG 7FEEC700, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
    ACPI: APIC 7FEEC5C0, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 15:11 APIC version 16
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Processor #1 15:11 APIC version 16
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    ACPI: IRQ14 used by override.
    ACPI: IRQ15 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    ACPI: HPET id: 0x10de8201 base: 0xfefff000
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000)
    swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
    swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
    swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
    Built 1 zonelists in Zone order. Total pages: 519907
    Kernel command line: root=/dev/sda2 ro vga=795
    mapped APIC to ffffb000 (fee00000)
    mapped IOAPIC to ffffa000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Detected 2009.278 MHz processor.
    spurious 8259A interrupt: IRQ7.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 2071656k/2096000k available (2445k kernel code, 23060k reserved, 817k data, 296k init, 1178496k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    .init : 0xc0435000 - 0xc047f000 ( 296 kB)
    .data : 0xc0363479 - 0xc042fa5c ( 817 kB)
    .text : 0xc0100000 - 0xc0363479 (2445 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
    Calibrating delay using timer specific routine.. 4022.62 BogoMIPS (lpj=6701795)
    Security Framework v1.0.0 initialized
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU 0(2) -> Core 0
    CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Early unpacking initramfs... done
    ACPI: Core revision 20070126
    ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
    CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
    SMP alternatives: switching to SMP code
    Booting processor 1/1 eip 3000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 4020.99 BogoMIPS (lpj=6697594)
    CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU 1(2) -> Core 1
    CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
    Total of 2 processors activated (8042.61 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    Brought up 2 CPUs
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: Using MMCONFIG
    PCI: No mmconfig possible on device 00:18
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Transparent bridge - 0000:00:06.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
    ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15)
    ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
    ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
    ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
    ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
    ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
    ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
    ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
    ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 *10 11 14 15)
    ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
    ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
    ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
    ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
    ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
    ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
    ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
    ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
    ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 13 devices
    ACPI: ACPI bus type pnp unregistered
    SCSI subsystem initialized
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    Time: hpet clocksource has been installed.
    Switched to high resolution mode on CPU 0
    Switched to high resolution mode on CPU 1
    pnp: 00:01: ioport range 0x1000-0x107f has been reserved
    pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
    pnp: 00:01: ioport range 0x1400-0x147f has been reserved
    pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
    pnp: 00:01: ioport range 0x1800-0x187f has been reserved
    pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
    pnp: 00:0b: iomem range 0xf0000000-0xf3ffffff could not be reserved
    pnp: 00:0c: iomem range 0xcde00-0xcffff has been reserved
    pnp: 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
    pnp: 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
    pnp: 00:0c: iomem range 0xfc000-0xfffff could not be reserved
    PCI: Bridge: 0000:00:06.0
    IO window: disabled.
    MEM window: fde00000-fdefffff
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:0a.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:0b.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:0c.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:0d.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:0e.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:0f.0
    IO window: a000-afff
    MEM window: fa000000-fcffffff
    PREFETCH window: e0000000-efffffff
    PCI: Setting latency timer of device 0000:00:06.0 to 64
    PCI: Setting latency timer of device 0000:00:0a.0 to 64
    PCI: Setting latency timer of device 0000:00:0b.0 to 64
    PCI: Setting latency timer of device 0000:00:0c.0 to 64
    PCI: Setting latency timer of device 0000:00:0d.0 to 64
    PCI: Setting latency timer of device 0000:00:0e.0 to 64
    PCI: Setting latency timer of device 0000:00:0f.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
    TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    checking if image is initramfs... it is
    Freeing initrd memory: 1746k freed
    apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    apm: disabled - APM is not SMP safe.
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Installing knfsd (copyright (C) 1996 [email protected]).
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Boot video device is 0000:07:00.0
    PCI: Setting latency timer of device 0000:00:0a.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0a.0:pcie00]
    Allocate Port Service[0000:00:0a.0:pcie03]
    PCI: Setting latency timer of device 0000:00:0b.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0b.0:pcie00]
    Allocate Port Service[0000:00:0b.0:pcie03]
    PCI: Setting latency timer of device 0000:00:0c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0c.0:pcie00]
    Allocate Port Service[0000:00:0c.0:pcie03]
    PCI: Setting latency timer of device 0000:00:0d.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0d.0:pcie00]
    Allocate Port Service[0000:00:0d.0:pcie03]
    PCI: Setting latency timer of device 0000:00:0e.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0e.0:pcie00]
    Allocate Port Service[0000:00:0e.0:pcie03]
    PCI: Setting latency timer of device 0000:00:0f.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0f.0:pcie00]
    Allocate Port Service[0000:00:0f.0:pcie03]
    vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 10240k, total 262144k
    vesafb: mode is 1280x1024x32, linelength=5120, pages=0
    vesafb: protected mode interface info at c000:c300
    vesafb: pmi: set display start = c00cc336, set palette = c00cc3a0
    vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Console: switching to colour frame buffer device 160x64
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    loop: module loaded
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    serio: i8042 KBD port at 0x60,0x64 irq 1
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    Freeing unused kernel memory: 296k freed
    libata version 2.21 loaded.
    pata_amd 0000:00:04.0: version 0.3.9
    PCI: Setting latency timer of device 0000:00:04.0 to 64
    scsi0 : pata_amd
    scsi1 : pata_amd
    ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
    ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
    ata1.00: ATAPI: PIONEER DVD-RW DVR-111D, 1.23, max UDMA/66
    ata1.00: configured for UDMA/66
    ata2: port disabled. ignoring.
    scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-111D 1.23 PQ: 0 ANSI: 5
    sata_nv 0000:00:05.0: version 3.5
    ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
    ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:05.0 to 64
    scsi2 : sata_nv
    scsi3 : sata_nv
    ata3: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001dc00 irq 16
    ata4: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001dc08 irq 16
    ata3: SATA link down (SStatus 0 SControl 300)
    ata4: SATA link down (SStatus 0 SControl 300)
    ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
    ACPI: PCI Interrupt 0000:00:05.1[b] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:05.1 to 64
    scsi4 : sata_nv
    scsi5 : sata_nv
    ata5: SATA max UDMA/133 cmd 0x000109e0 ctl 0x00010be2 bmdma 0x0001c800 irq 17
    ata6: SATA max UDMA/133 cmd 0x00010960 ctl 0x00010b62 bmdma 0x0001c808 irq 17
    ata5: SATA link down (SStatus 0 SControl 300)
    ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata6.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133
    ata6.00: 488397168 sectors, multi 1: LBA48
    ata6.00: configured for UDMA/133
    scsi 5:0:0:0: Direct-Access ATA WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5
    ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
    ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:05.2 to 64
    scsi6 : sata_nv
    scsi7 : sata_nv
    ata7: SATA max UDMA/133 cmd 0x0001c400 ctl 0x0001c002 bmdma 0x0001b400 irq 18
    ata8: SATA max UDMA/133 cmd 0x0001bc00 ctl 0x0001b802 bmdma 0x0001b408 irq 18
    ata7: SATA link down (SStatus 0 SControl 300)
    ata8: SATA link down (SStatus 0 SControl 300)
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
    ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 19
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    PCI: Setting latency timer of device 0000:00:02.1 to 64
    ehci_hcd 0000:00:02.1: EHCI Host Controller
    ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:02.1: debug port 1
    PCI: cache line size of 64 is not supported by device 0000:00:02.1
    ehci_hcd 0000:00:02.1: irq 19, io mem 0xfe02e000
    ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    sd 5:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
    sd 5:0:0:0: [sda] Write Protect is off
    sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 5:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
    sd 5:0:0:0: [sda] Write Protect is off
    sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4 <<6>usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    sda5<6>hub 1-0:1.0: 10 ports detected
    sda6 >
    sd 5:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 0:0:0:0: Attached scsi CD-ROM sr0
    ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    ohci_hcd 0000:00:02.0: OHCI Host Controller
    ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    ohci_hcd 0000:00:02.0: irq 16, io mem 0xfe02f000
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 10 ports detected
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    usb 1-4: new high speed USB device using ehci_hcd and address 3
    usb 1-4: configuration #1 chosen from 1 choice
    hub 1-4:1.0: USB hub found
    hub 1-4:1.0: 4 ports detected
    usb 1-6: new high speed USB device using ehci_hcd and address 4
    usb 2-1: new low speed USB device using ohci_hcd and address 2
    forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
    ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
    ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:08.0 to 64
    forcedeth: using HIGHDMA
    usb 2-1: configuration #1 chosen from 1 choice
    usbcore: registered new interface driver hiddev
    input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input2
    input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-1
    usbcore: registered new interface driver usbhid
    drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    eth0: forcedeth.c: subsystem: 01043:8239 bound to 0000:00:08.0
    vboxdrv: Trying to deactivate the NMI watchdog permanently...
    vboxdrv: Successfully done.
    input: Power Button (FF) as /devices/virtual/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /devices/virtual/input/input4
    ACPI: Power Button (CM) [PWRB]
    ACPI: Fan [FAN] (on)
    ACPI: Thermal Zone [THRM] (40 C)
    PPP generic driver version 2.4.2
    sr 0:0:0:0: Attached scsi generic sg0 type 5
    sd 5:0:0:0: Attached scsi generic sg1 type 0
    i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
    i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
    ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
    ACPI: PCI Interrupt 0000:00:06.1[b] -> Link [AAZA] -> GSI 21 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:06.1 to 64
    rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one year, y3k
    parport_pc 00:09: reported by Plug and Play ACPI
    parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    lp0: using parport0 (interrupt-driven).
    input: PC Speaker as /devices/platform/pcspkr/input/input5
    ppdev: user-space parallel port driver
    EXT3 FS on sda2, internal journal
    ReiserFS: sda3: found reiserfs format "3.6" with standard journal
    ReiserFS: sda3: using ordered data mode
    ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda3: checking transaction log (sda3)
    ReiserFS: sda3: Using r5 hash to sort names
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda5, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda6, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    fuse init (API version 7.8)
    Linux agpgart interface v0.102
    nvidia: module license 'NVIDIA' taints kernel.
    ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
    ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:07:00.0 to 64
    NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
    it87: Found IT8716F chip at 0x290, revision 0
    it87: in3 is VCC (+5V)
    it87: in7 is VCCH (+5V Stand-By)
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    eth0: no IPv6 routers present

    You should be able to get some more precise information from your Xorg logs, but I would bet it is related to the evdev driver. Some of the options in your xorg.conf no longer work with the latest version. For now you should be able to either map your mouse directly to the appropriate /dev/event* entry or change to the standard mouse driver, both of those methods should be in the wiki.
    You are supposed to be able to use the evdev driver without the input section of your xorg.conf by using dbus/hal autodetection, but AFAIK at the moment the xorg-server package still isn't compiled with hal support, so you would have to patch and rebuild the package.

  • Xorg-server 1.6 - black screen with mouse cursor

    Hi
    First of all: I'm really new to Arch, so maybe there is a real easy fix for this problem
    Since upgrading to xorg-server 1.6 (and today to 1.6.1) I'm not able to get a running Desktop Environment.
    Usually I am using gnome with compiz-fusion on my Geforce 4 (nvidia-96xx 96.43.11-4 driver).
    When I boot my machine i see gdm and I am able to login. I can hear my login sound but I only get a black screen with a mouse cursor.
    I added a new test user to my system without compiz and get the same.
    I tried my old xorg.conf from 1.5, generated a new one with X -configure and tried without xorg.conf but everytime the same
    Actually I'm not sure if the xorg update is responsible for this, because i did not watch the upgrade-process....
    I googled this problem and was searching similar things in this froum, but I wasn't able to find something
    Here are some files
    xorg.conf (i know there are some bullshit things in it, but it was workig )
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5x) man page for details about the format of
    # this file.
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    Section "Module"
    # This loads the DBE extension module.
    Load "dbe" # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    # This loads the font modules
    # Load "type1"
    # Load "freetype"
    # Load "xtt"
    # This loads the GLX module
    Load "glx"
    # This loads the DRI module
    # Load "dri"
    EndSection
    # Files section. This allows default font and rgb paths to be set
    Section "Files"
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.
    # RgbPath "/usr/share/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    # FontPath "/usr/share/fonts/OTF"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    FontPath "/usr/lib/X11/fonts/local/"
    FontPath "/usr/lib/X11/fonts/misc/"
    FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Speedo/"
    FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    FontPath "/usr/lib/X11/fonts/75dpi/"
    FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    # Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.
    # Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    # Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    # Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    # Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    # Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    # Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    # Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    # Option "Protocol" "Xqueue"
    Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "de"
    Option "XkbVariant" "nodeadkeys"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "IMPS/2" # PS/2 Mouse
    Option "Device" "/dev/psaux"
    Option "Buttons" "5"
    Option "ZAxisMapping" "4 5"
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.
    # Option "Protocol" "Xqueue"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
    Identifier "Eizo"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync 24.8-80
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-75
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName "Unknown"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    EndSection
    # Device configured by xorgconfig:
    Section "Device"
    Identifier "GeForce4"
    # Driver "nv"
    Driver "nvidia"
    #VideoRam 131072
    # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "GeForce4"
    Monitor "Eizo"
    DefaultDepth 24
    Option "AddARGBGLXVisuals" "true"
    Subsection "Display"
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    # Section "DRI"
    # Mode 0666
    # EndSection
    Section "Extensions"
    Option "Composite" "enable"
    EndSection
    Xorg.0.log
    X.Org X Server 1.6.1
    Release Date: 2009-4-14
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux delirium 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
    Build Date: 15 April 2009 11:09:10AM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 15 23:20:32 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "Screen 1" (0)
    (**) | |-->Monitor "Eizo"
    (**) | |-->Device "GeForce4"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/lib/X11/fonts/local/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/misc/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/Type1/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
    Entry deleted from font path.
    (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is enabled
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Mouse1
    (WW) Disabling Keyboard1
    (II) Loader magic: 0x1a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@3:0:0) nVidia Corporation NV25 [GeForce4 Ti 4200] rev 163, Mem @ 0xe5000000/16777216, 0xd0000000/134217728, 0xd8000000/524288, BIOS @ 0x????????/131072
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded by default.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
    (II) NVIDIA GLX Module 96.43.11 Mon Feb 23 15:43:14 PST 2009
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
    (II) NVIDIA dlloader X Driver 96.43.11 Mon Feb 23 15:32:04 PST 2009
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 03@00:00:0
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
    (**) NVIDIA(0): Enabling RENDER acceleration
    (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    (II) NVIDIA(0): enabled.
    (II) NVIDIA(0): NVIDIA GPU GeForce4 Ti 4200 at PCI:3:0:0 (GPU-0)
    (--) NVIDIA(0): Memory: 131072 kBytes
    (--) NVIDIA(0): VideoBIOS: 04.25.00.34.00
    (II) NVIDIA(0): Detected AGP rate: 4X
    (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) NVIDIA(0): Connected display device(s) on GeForce4 Ti 4200 at PCI:3:0:0:
    (--) NVIDIA(0): EIZO L578 (DFP-0)
    (--) NVIDIA(0): EIZO L578 (DFP-0): 165.0 MHz maximum pixel clock
    (--) NVIDIA(0): EIZO L578 (DFP-0): External Single Link TMDS
    (II) NVIDIA(0): Assigned Display Device: DFP-0
    (II) NVIDIA(0): Validated modes:
    (II) NVIDIA(0): "1280x1024"
    (II) NVIDIA(0): "1024x768"
    (II) NVIDIA(0): "800x600"
    (II) NVIDIA(0): "640x480"
    (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
    (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
    (--) NVIDIA(0): option
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) NVIDIA(0): Initialized GART.
    (II) NVIDIA(0): Setting mode "1280x1024"
    (II) Loading extension NV-GLX
    (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
    (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
    (==) NVIDIA(0): Backing store disabled
    (==) NVIDIA(0): Silken mouse enabled
    (II) NVIDIA(0): DPMS enabled
    (II) Loading extension NV-CONTROL
    (==) RandR enabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing extension GLX
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.2.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
    (**) ImPS/2 Logitech Wheel Mouse: always reports core events
    (**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event6"
    (II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
    (II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
    (II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
    (II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
    (**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
    (**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
    (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
    (**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
    (**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
    (**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device saa7134 IR (LifeView FlyVIDEO30
    (**) saa7134 IR (LifeView FlyVIDEO30: always reports core events
    (**) saa7134 IR (LifeView FlyVIDEO30: Device: "/dev/input/event5"
    (II) saa7134 IR (LifeView FlyVIDEO30: Found keys
    (II) saa7134 IR (LifeView FlyVIDEO30: Configuring as keyboard
    (II) XINPUT: Adding extended input device "saa7134 IR (LifeView FlyVIDEO30" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    Last edited by MueLLe (2009-04-15 21:35:42)

    I'm having a very similar issue. Sometimes, when I boot and type in startx (I'm not even a GNOME user--I use dwm and no graphical login manager), I just get a black screen. No mouse cursor, so I think X doesn't even load. It only started with the xserver 1.6 update and the update to that hasn't changed anything. What I've been doing is just rebooting until it loads normally (takes one to three times). Is anyone else having this problem?

  • Unable to get Compiz Fusion working...

    I'm aware this isn't a new issue, but the Wiki has so far been unable to solve my queries.
    I've just freshly installed Arch on my new PC: Pentium-D 3.8Ghz, 2Gb of RAM and an ATi Radeon X1950 Pro (PCI-E).
    I've installed Compiz Fusion as suggested via the wiki. When I run the fusion icon and activate compiz, I am left with no window borders and no working compiz. I've followed the troubleshooting section on the wiki to no avail. The problem remains.
    My xorg.conf:
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    Section "Module"
    # This loads the DBE extension module.
    Load "dbe" # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    # This loads the font modules
    # Load "type1"
    Load "freetype"
    # Load "xtt"
    # This loads the GLX module
    Load "glx"
    # This loads the DRI module
    Load "dri"
    EndSection
    # Files section. This allows default font and rgb paths to be set
    Section "Files"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    # FontPath "/usr/share/fonts/TTF"
    # FontPath "/usr/share/fonts/Type1"
    # FontPath "/usr/lib/X11/fonts/local/"
    # FontPath "/usr/lib/X11/fonts/misc/"
    # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    # FontPath "/usr/lib/X11/fonts/75dpi/"
    # FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    # Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.
    # Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    # Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    # Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    # Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    # Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    # Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    # Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc104"
    Option "XkbLayout" "gb"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "Auto" # Auto detect
    Option "Device" "/dev/input/mice"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
    Identifier "My Monitor"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync 30-82
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-70
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName "Unknown"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    EndSection
    # Device configured by xorgconfig:
    Section "Device"
    Identifier "** ATI Radeon (generic) [radeon]"
    Driver "radeon"
    #VideoRam 262144
    # Insert Clocks lines here if appropriate
    Option "XAANoOffscreenPixmaps" "true"
    Option "DRI" "true"
    EndSection
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "** ATI Radeon (generic) [radeon]"
    Monitor "My Monitor"
    DefaultDepth 24
    Subsection "Display"
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1680x1050" "1280x1024" "1024x768" "800x600"
    ViewPort 0 0
    EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"
    Option "AIGLX" "true"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    Section "DRI"
    Group 0
    Mode 0666
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    What am I doing wrong?
    /izo\

    EvilSide wrote:Edit:
    Just enable wanted effects from ccsm and enjoy
    I can't load CCSM, from either GNOME or KDE. When I attempt to do so, I get this:
    [izo@kether ~]$ ccsm
    (process:2832): Gtk-WARNING **: Locale not supported by C library.
    Using the fallback 'C' locale.
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Info: No sexy-python package found, don't worry it's optional.
    Traceback (most recent call last):
    File "/usr/bin/ccsm", line 100, in <module>
    import ccm
    File "/usr/lib/python2.6/site-packages/ccm/__init__.py", line 1, in <module>
    from ccm.Conflicts import *
    File "/usr/lib/python2.6/site-packages/ccm/Conflicts.py", line 27, in <module>
    from ccm.Constants import *
    File "/usr/lib/python2.6/site-packages/ccm/Constants.py", line 88, in <module>
    locale.setlocale(locale.LC_ALL, "")
    File "/usr/lib/python2.6/locale.py", line 494, in setlocale
    return _setlocale(category, locale)
    locale.Error: unsupported locale setting
    /izo\

  • Urgently Upgrade Stop In XPRAS_UPG Phase

    Hi all,
    This is our infrastructure:
    Windows 2000
    Oracle 9.2.0.7
    SAP 4.6B
    Kernel Release 46D
    We are upgrading our DEV System to R/3 Enterprise 4.7 Ext. 2 Sr1
    <b>Our Upgrade Process Stop in the XPRAS_UPG Phase. Basically it gives this error:</b>
    WARNING: tp terminated with status 12
    R3up> ERROR: tp terminated with error status -1
    R3up> ERROR: 2 errors detected during XPRAS_UPG
    R3up> ERROR: 1 activities have been aborted in XPRAS_UPG
    R3up> ERROR: Operation(s) not completely processed.
              Remaining change request found in buffer TVD.
              Ignoring aborted import steps will cause severe inconsistencies
    Logs that we reviewed:
    <b>XPRASUPG.ECO and R3up.ECO</b>
    the problem is with the <b>RDDEXECL</b> JOB.  Which is in the status <b>CANCELED</b>
    When we Check the JOB LOG it gives  this:
                                                                                    22.10.2007 10:59:35 Job started                                                                     
    22.10.2007 10:59:35 Step 001 started (program RDDEXECL, variant , user ID DDIC)       
    22.10.2007 10:59:35 All DB buffers of application server vensapd were synchronized      PU              
    22.10.2007 11:01:17 ABAP/4 processor: CONVT_CODEPAGE_INIT       
    22.10.2007 11:01:17 Job cancelled                                                       00
    When you click on ABAP/4 processor: CONVT_CODEPAGE_INIT you get this:
    <b>Runtime errors         CONVT_CODEPAGE_INIT                                  
    Exception              CX_SY_CODEPAGE_CONVERTER_INIT                        
    Occurred on            22.10.2007 at   11:01:17                                                                               
    </b>                                                                               
    The conversion of some code pages is not supported.                                                                               
    <b>What happened? </b>                                                                               
    The conversion of texts in code page '1800' to code page '1100' is not      
    supported here.                                                                               
    The running ABAP program 'SAPLSTXD' had to be terminated, since conversion  
    could cause incorrect data to be generated.        
    Error analysis
                                                                                    An exception occurred. This exception is dealt with in more detail below              
    . The exception, which is assigned to the class                                       
    <b> 'CX_SY_CODEPAGE_CONVERTER_INIT'</b>, was neither                                         
    caught nor passed along using a RAISING clause, in the procedure  <b>"READ_TEXTLINES" "(FORM)"</b>.                                                                               
    Since the caller of the procedure could not have expected this exception              
    to occur, the running program was terminated.                                        
    The reason for the exception is:      
    One of the two code pages, '1800' or '1100' may be unknown to the system.             
    It may be that a Unicode code page was specified for a file in the                    
    LEGACY MODE. This is not permitted.                                                                               
    It is possible that additional parameters for the code page conversion                
    (for example, the replacement character) have invalid values. Further                 
    information can be found under "Internal Notes".                                                                               
    If the conversion error occurred while the system was opening, reading,               
    or writing a file, the name of this file is 'no file'.                                
    (For more information on this file: " X u00F0####u00CCu00FF#,").
    Please Some help!
    <b>We saw this note:</b>
    <b>122597</b> Ignoring errors in the phase XPRAS
    So we try with the option "u00CFgnore" + "Repair Severe Errors" but nothing happens, in remains in the same place, Start the Phase a again and Stop at the same point.
    <b>676135</b> Short Dump when you import Support Packages
    This notes explain this:  (Page 3 Paragraph 3)
    If you are still upgrading, import the transport order into the system using 'R3trans -i <data file name>'. Enter the correct path to the data file (possibly DIR_PUT).
    But we are scared about to STOP the upgrade here (Like 'cancel' option instead of continue and after restart the upgrade) does somebody apply this note?
    <b>This are the logs:</b>
    <b>XPRASUPG.ECO</b>
      LIST OF ERRORS AND RETURN CODES  *******
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    XPRA ERRORS and RETURN CODE in SAPR620ZF1.TVD
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1AETR012XProgram terminated (job: "RDDEXECL", no.: "10593502")
      Long text:
        Cause
          Program "&V#&", which was started in the background, was terminated
          abnormally.
        System Response
          The system created a job log for the terminated program.
        What to do
          Proceed as follows:
          Log onto the system in which the program was executed. The system is
          specified at the beginning of the transport log.
          Then call transaction SM37 to display the job log.
          Enter "&V#&" as job name and "DDIC" as user name.
          Restrict the starting date to the starting date specified in the
          transport log.
          For the other selection criteria, select only jobs with the status
          "cancelled". Then press <LS>Execute</>.
          A list of the jobs satisfying the selection criteria is displayed.
          You can display the log by pressing <LS>Job log</>.
          If the list contains several jobs, you can select the job with the ID "
          &V#&" with <LS>Display</> -> <LS>Job details</> or define further
          details for the selection criteria in the initial screen of transaction
          SM37.
          If the ABAP processor reports cancellation, double-clicking on the
          corresponding message in the job log branches to the display of the
          corresponding short dump.
    1AEPU320 See job log"RDDEXECL""10593502""TVD"
    1 ETP111 exit code           : "12"
    >>> PLEASE READ THE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<<
    XPRAs are application reports that run at the end of an upgrade.
    Most XPRA reports have a report documentation that explains what
    the report does and how errors can be corrected.
    Call transaction se38 in the SAP system, enter the report name,
    select 'Documentation' and click the 'Display' button.
    >>> The problematic XPRAs are mentioned in messages of type PU132 above <<<
    <b>R3up.ECO:</b>
    stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 12
    WARNS: Highest tp internal warning was: 0118
    tp finished with return code: 12
    meaning:
      A tool used by tp aborted
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
    Process with ID 15160 terminated with status 12
    Deleting file D:\usr\sap\put\log\XPRASUPG.ELG
    Moving file D:\usr\sap\put\log\PROT.TMP to D:\usr\sap\put\log\SAPR620ZF1.TVD
    Moving file D:\usr\sap\put\log\XPRASUPG.ELG to D:\usr\sap\put\tmp\XPRASUPG.ELG
    Deleting file D:\usr\sap\put\tmp\MSGIN.LST
    Deleting file D:\usr\sap\put\tmp\MSGOUT.LST
    Deleting file D:\usr\sap\put\tmp\MSGOUT.LOG
    Deleting file D:\usr\sap\put\tmp\XPRASUPG.ELG
    Deleting file D:\usr\sap\put\log\TP.ECO
    Deleting file D:\usr\sap\put\bin\TRLIST.DMP
    Deleting file D:\usr\sap\put\tmp\upalert.log
    Deleting file D:\usr\sap\put\tmp\upalert.log
    Deleting file D:\usr\sap\put\tmp\upalert.log
    Copying file D:\usr\sap\put\bin\XPRASUPG.TPP to D:\usr\sap\put\bin\AKKU.TMP
    Copying file D:\usr\sap\put\buffer\TVD to D:\usr\sap\put\buffer\AFTXPRAS.BUF
    Phase XPRAS_UPG:
    Deleting file D:\usr\sap\put\log\CONNECT.LOG
    R3up> Starting subprocess tp.exe with id 4196 at 20071022101802
    EXECUTING D:\usr\sap\TVD\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\XPRASUPG.TPP put TVD
    Environment: dbs_ora_schema=SAPR3
    Environment: dbs_ora_tnsname=TVD
    Environment: NLS_LANG=AMERICAN_AMERICA.WE8DEC
    Environment: ORACLE_HOME=D:\oracle\TVD\920
    Environment: ORACLE_SID=TVD
    This is D:\usr\sap\TVD\SYS\exe\run\tp.exe version 340.16.37 (release 640)
    Warning: Parameter INTERRUPT is no longer used.
    Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
    Warning: Parameter WITH_TACOB is no longer used.
    Warning: Parameter IMPDP_BY_EVENT is no longer used.
    Warning: Parameter INTERRUPT is no longer used.
    Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
    Warning: Parameter WITH_TACOB is no longer used.
    Warning: Parameter IMPDP_BY_EVENT is no longer used.
    Warning: Parameter DBCONFPATH is no longer used.
    Looking for effective putsteps ... ... ready (looking for putsteps)
    STARTSAP continues...
    D:\usr\sap\TVD\SYS\exe\run\sapevt.exe=>sapparam(1c): No Profile used.
    D:\usr\sap\TVD\SYS\exe\run\sapevt.exe=>sapparam(1c): No Profile used.
    stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 12
    WARNS: Highest tp internal warning was: 0118
    tp finished with return code: 12
    meaning:
      A tool used by tp aborted
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
    Process with ID 16400 terminated with status 12
    Deleting file D:\usr\sap\put\log\XPRASUPG.ELG
    Moving file D:\usr\sap\put\log\PROT.TMP to D:\usr\sap\put\log\SAPR620ZF1.TVD
    Moving file D:\usr\sap\put\log\XPRASUPG.ELG to D:\usr\sap\put\tmp\XPRASUPG.ELG
    Deleting file D:\usr\sap\put\tmp\MSGIN.LST
    Deleting file D:\usr\sap\put\tmp\MSGOUT.LST
    Deleting file D:\usr\sap\put\tmp\MSGOUT.LOG
    Deleting file D:\usr\sap\put\tmp\XPRASUPG.ELG
    Deleting file D:\usr\sap\put\log\TP.ECO
    Deleting file D:\usr\sap\put\bin\TRLIST.DMP
    Deleting file D:\usr\sap\put\tmp\upalert.log
    Deleting file D:\usr\sap\put\tmp\upalert.log
    Deleting file D:\usr\sap\put\tmp\upalert.log
    Copying file D:\usr\sap\put\bin\XPRASUPG.TPP to D:\usr\sap\put\bin\AKKU.TMP
    Copying file D:\usr\sap\put\buffer\TVD to D:\usr\sap\put\buffer\AFTXPRAS.BUF
    Phase XPRAS_UPG:
    Deleting file D:\usr\sap\put\log\CONNECT.LOG
    R3up> Starting subprocess tp.exe with id 4196 at 20071022105721
    EXECUTING D:\usr\sap\TVD\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\XPRASUPG.TPP put TVD
    Environment: dbs_ora_schema=SAPR3
    Environment: dbs_ora_tnsname=TVD
    Environment: NLS_LANG=AMERICAN_AMERICA.WE8DEC
    Environment: ORACLE_HOME=D:\oracle\TVD\920
    Environment: ORACLE_SID=TVD
    This is D:\usr\sap\TVD\SYS\exe\run\tp.exe version 340.16.37 (release 640)
    Warning: Parameter INTERRUPT is no longer used.
    Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
    Warning: Parameter WITH_TACOB is no longer used.
    Warning: Parameter IMPDP_BY_EVENT is no longer used.
    Warning: Parameter INTERRUPT is no longer used.
    Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
    Warning: Parameter WITH_TACOB is no longer used.
    Warning: Parameter IMPDP_BY_EVENT is no longer used.
    Warning: Parameter DBCONFPATH is no longer used.
    Looking for effective putsteps ... ... ready (looking for putsteps)
    STARTSAP continues...
    D:\usr\sap\TVD\SYS\exe\run\sapevt.exe=>sapparam(1c): No Profile used.
    D:\usr\sap\TVD\SYS\exe\run\sapevt.exe=>sapparam(1c): No Profile used.
    stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 12
    WARNS: Highest tp internal warning was: 0118
    tp finished with return code: 12
    meaning:
      A tool used by tp aborted
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
    Process with ID 15096 terminated with status 12
    Deleting file D:\usr\sap\put\log\XPRASUPG.ELG
    Moving file D:\usr\sap\put\log\PROT.TMP to D:\usr\sap\put\log\SAPR620ZF1.TVD
    Moving file D:\usr\sap\put\log\XPRASUPG.ELG to D:\usr\sap\put\tmp\XPRASUPG.ELG
    Deleting file D:\usr\sap\put\tmp\MSGIN.LST
    Deleting file D:\usr\sap\put\tmp\MSGOUT.LST
    Deleting file D:\usr\sap\put\tmp\MSGOUT.LOG
    Deleting file D:\usr\sap\put\tmp\XPRASUPG.ELG
    Deleting file D:\usr\sap\put\log\TP.ECO
    Deleting file D:\usr\sap\put\bin\TRLIST.DMP
    Best Regards,
    Desiree Cardenas

    Hi Eric,
    In fact in the previous post you can see:
    the problem is with the
    RDDEXECL JOB. Which is in the status CANCELED
    When we Check the JOB LOG it gives this:
    22.10.2007 10:59:35 Job started
    22.10.2007 10:59:35 Step 001 started (program RDDEXECL, variant , user ID DDIC)
    22.10.2007 10:59:35 All DB buffers of application server vensapd were synchronized PU
    22.10.2007 11:01:17 ABAP/4 processor: CONVT_CODEPAGE_INIT
    22.10.2007 11:01:17 Job cancelled 00
    When you click on ABAP/4 processor: CONVT_CODEPAGE_INIT you get this:
    Runtime errors CONVT_CODEPAGE_INIT
    Exception CX_SY_CODEPAGE_CONVERTER_INIT
    Occurred on 22.10.2007 at 11:01:17
    The conversion of some code pages is not supported.
    What happened?
    The conversion of texts in code page '1800' to code page '1100' is not
    supported here.
    The running ABAP program 'SAPLSTXD' had to be terminated, since conversion
    could cause incorrect data to be generated.
    Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class
    'CX_SY_CODEPAGE_CONVERTER_INIT', was neither
    caught nor passed along using a RAISING clause, in the procedure "READ_TEXTLINES" "(FORM)".
    Since the caller of the procedure could not have expected this exception
    to occur, the running program was terminated.
    The reason for the exception is:
    One of the two code pages, '1800' or '1100' may be unknown to the system.
    It may be that a Unicode code page was specified for a file in the
    LEGACY MODE. This is not permitted.
    It is possible that additional parameters for the code page conversion
    (for example, the replacement character) have invalid values. Further
    information can be found under "Internal Notes".
    If the conversion error occurred while the system was opening, reading,
    or writing a file, the name of this file is 'no file'.
    (For more information on this file: " X ð####Ìÿ#,").
    Sorry for the big amount of information. I will put the complete JOB LOG.
    LOG:
    Runtime errors CONVT_CODEPAGE_INIT
    Exception CX_SY_CODEPAGE_CONVERTER_INIT
    Occurred on 22.10.2007 at 11:01:17
    The conversion of some code pages is not supported.
    What happened?
    The conversion of texts in code page '1800' to code page '1100' is not
    supported here.
    The running ABAP program 'SAPLSTXD' had to be terminated, since conversion
    could cause incorrect data to be generated.
    What can you do?
    Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion
    date.
    If the application required you to enter a code page, you may be able to
    avoid the error by restarting the application and entering a different
    code page.
    You can display the available codepages using the transaction SCP. For
    more utilities for codepages, use the transaction SNLS.
    Error analysis                                                                                An exception occurred. This exception is dealt with in more detail below                                                          
    . The exception, which is assigned to the class                                                                               
    'CX_SY_CODEPAGE_CONVERTER_INIT', was neither                                                                               
    caught nor passed along using a RAISING clause, in the procedure                                                                  
    "READ_TEXTLINES" "(FORM)"                                                                               
    Since the caller of the procedure could not have expected this exception                                                          
    to occur, the running program was terminated.                                                                               
    The reason for the exception is:                                                                               
    One of the two code pages, '1800' or '1100' may be unknown to the system.                                                         
    It may be that a Unicode code page was specified for a file in the LEGACY MODE. This is not permitted.                                                                               
    It is possible that additional parameters for the code page conversion                             
    (for example, the replacement character) have invalid values. Further                              
    information can be found under "Internal Notes".                                                                               
    If the conversion error occurred while the system was opening, reading,                            
    or writing a file, the name of this file is 'no file'.                                             
    (For more information on this file: " X ð####Ìÿ#,").                                                                               
    How to correct the error                                                                               
    The exception must either be prevented, caught within the procedure                                
    "READ_TEXTLINES"                                                                               
    "(FORM)", or declared in the procedure's RAISING clause.                                           
    To prevent the exception, note the following:                                                                               
    You may able to find an interim solution to the problem                                            
    in the SAP note system. If you have access to the note system yourself,                            
    use the following search criteria:                                                                               
    "CONVT_CODEPAGE_INIT" CX_SY_CODEPAGE_CONVERTER_INITC                                               
    "SAPLSTXD" or "LSTXDFDB"                                                                           
    "READ_TEXTLINES"                                                                               
    If you cannot solve the problem yourself, please send the                                          
    following documents to SAP:                                                                               
    1. A hard copy print describing the problem.                                                       
       To obtain this, select the "Print" function on the current screen.                              
    2. A suitable hardcopy prinout of the system log.                                                  
       To obtain this, call the system log with Transaction SM21                                       
       and select the "Print" function to print out the relevant                                       
       part.                                                                               
    3. If the programs are your own programs or modified SAP programs,                                 
       supply the source code.                                                                         
       To do this, you can either use the "PRINT" command in the editor or                             
       print the programs using the report RSINCL00.                                                                               
    4. Details regarding the conditions under which the error occurred                                                                               
    File attributes no file                                                                               
    System environment                                                                               
    SAP Release.............. "620"                                                                               
    Application server....... "vensapd"                                                                               
    Network address.......... "10.55.46.71"                                                                               
    Operating system......... "Windows NT"                                                                               
    Release.................. "5.0"                                                                               
    Hardware type............ "4x Intel 801586"                                                                               
    Character length......... 8 Bits                                                                               
    Pointer length........... 32 Bits                                                                               
    Work process number...... 11                                                                               
    Short dump setting....... "full"                                                                               
    Database server.......... "VENSAPD"                                                                               
    Database type............ "ORACLE"                                                                               
    Database name............ "TVD"                                                                               
    Database owner........... "SAPR3"                                                                               
    Character set............ "English_United State"                                                                               
    SAP kernel............... "640"                                                                               
    Created on............... "Jun 25 2004 20:55:59"                                                                               
    Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"                                                                    
    Database version......... "OCI_920_SHARE "                                                                               
    Patch level.............. "21"                                                                               
    Patch text............... " "                                                                               
    Supported environment....                                                                               
    Database................. "ORACLE 8.1.7.., ORACLE 9.2.0.."                                                                               
    SAP database version..... "640"                                                                               
    Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"                                                                               
    User, transaction...                                                                               
    Client.............. 000               
    User................ "DDIC"            
    Language key........ "E"               
    Transaction......... " "               
    Program............. "SAPLSTXD"        
    Screen.............. "SAPMSSY0 1000"   
    Screen line......... 6                                                                               
    Information on where terminated                                                                               
    The termination occurred in the ABAP program "SAPLSTXD" in "READ_TEXTLINES".      
    The main program was "RDDEXECU ".                                                                               
    The termination occurred in line 82 of the source code of the (Include)           
    program "LSTXDFDB"                                                               
    of the source code of program "LSTXDFDB" (when calling the editor 820).           
    The program "SAPLSTXD" was started as a background job.                           
    Processing was terminated because the exception "CX_SY_CODEPAGE_CONVERTER_INIT"   
    occurred in the                                                                  
    procedure "READ_TEXTLINES" "(FORM)" but was not handled locally, not declared     
    in the                                                                           
    RAISING clause of the procedure.                                                  
    The procedure is in the program "SAPLSTXD ". Its source code starts in line 75    
    of the (Include) program "LSTXDFDB ".                                                                               
    Best Regards,
    Desiree Cardenas

  • Xorg disables keyboard and mice [solved]

    after last update I cant use the trackpoint and keyboard on my IBM T40 under x, only the touchpad works.
    here is my xorg.conf
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    Section "Module"
    # This loads the DBE extension module.
    Load "dbe" # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    # This loads the font modules
    # Load "type1"
    Load "freetype"
    # Load "xtt"
    # This loads the GLX module
    # Load "glx"
    # This loads the DRI module
    # Load "dri"
    EndSection
    # Files section. This allows default font and rgb paths to be set
    Section "Files"
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.
    # RgbPath "/usr/share/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    # FontPath "/usr/lib/X11/fonts/local/"
    # FontPath "/usr/lib/X11/fonts/misc/"
    # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Speedo/"
    # FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    # FontPath "/usr/lib/X11/fonts/75dpi/"
    # FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    # Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.
    # Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    # Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    # Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    # Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    # Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    # Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    # Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "de"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "Auto" # Auto detect
    Option "Device" "/dev/input/mice"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    EndSection
    Section "InputDevice"
    Identifier "SynapticsMouse1"
    Driver "synaptics"
    Option "Protocol" "auto-dev"
    Option "Device" "/dev/input/mice"
    Option "MinSpeed" "0.09"
    Option "MaxSpeed" "0.18"
    Option "BottomEdge" "4200"
    Option "SHMConfig" "on"
    Option "FingerLow" "25"
    Option "LeftEdge" "1700"
    Option "MaxTapMove" "220"
    Option "MaxTapTime" "180"
    Option "FingerHigh" "30"
    Option "VertScrollDelta" "100"
    Option "TopEdge" "1700"
    Option "AccelFactor" "0.0015"
    Option "RightEdge" "5300"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
    Identifier "My Monitor"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync 31.5, 35.15, 35.5
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-70
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    #Section "Device"
    # Identifier "Standard VGA"
    # VendorName "Unknown"
    # BoardName "Unknown"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    ## Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    #EndSection
    # Device configured by xorgconfig:
    Section "Device"
    Identifier "** ATI Radeon (generic) [radeon]"
    Driver "radeon"
    Option "DynamicClocks" "on"
    Option "AGPMode" "4"
    Option "RenderAccel" "on"
    Option "EnablePageFlip" "on"
    Option "BIOSHotkeys" "on"
    #VideoRam 65536
    # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "** ATI Radeon (generic) [radeon]"
    Monitor "My Monitor"
    DefaultDepth 24
    Subsection "Display"
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    InputDevice "SynapticsMouse1" "AlwaysCore"
    EndSection
    # Section "DRI"
    # InputDevice "SynapticsMouse1" "AlwaysCore"
    # Mode 0666
    # EndSection
    and the Xorg.0.log
    X.Org X Server 1.5.3
    Release Date: 5 November 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.27-ARCH i686
    Current Operating System: Linux t40 2.6.28-ARCH #1 SMP PREEMPT Tue Jan 6 10:26:22 UTC 2009 i686
    Build Date: 17 December 2008 08:20:05PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 12 13:04:51 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "Screen 1" (0)
    (**) | |-->Monitor "My Monitor"
    (**) | |-->Device "** ATI Radeon (generic) [radeon]"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (**) |-->Input Device "SynapticsMouse1"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
    (WW) Disabling Mouse1
    (WW) Disabling Keyboard1
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Loader magic: 0x81d5fe0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 4.1
    X.Org XInput driver : 2.1
    X.Org Server Extension : 1.1
    X.Org Font Renderer : 0.6
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0@1:0:0) ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] rev 0, Mem @ 0xe0000000/0, 0xc0100000/0, I/O @ 0x00003000/0, BIOS @ 0x????????/131072
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded by default.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded by default.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.5.3, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.6
    (II) Loading font FreeType
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (==) AIGLX enabled
    (==) Exporting typical set of GLX visuals
    (II) Loading extension GLX
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "radeon"
    (II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 6.9.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 4.1
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 0.99.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.1
    (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
    ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
    ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
    ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
    ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
    ATI Mobility RADEON M98, ATI Radeon RV730 (AGP),
    ATI Radeon RV730 (AGP), ATI RV730XT [Radeon HD 4670],
    ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
    ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
    ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
    ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
    ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, ATI RV670,
    ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Radeon RV710,
    ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
    ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
    ATI Radeon HD 3430, ATI FireMV 2450, ATI FireMV 2260,
    ATI FireMV 2260, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
    ATI Mobility Radeon HD 3670, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics
    (II) Primary Device is: PCI 01@00:00:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) RADEON(0): TOTO SAYS 00000000c0100000
    (II) RADEON(0): MMIO registers at 0x00000000c0100000: size 64KB
    (II) RADEON(0): PCI bus 1 card 0 func 0
    (**) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (**) RADEON(0): Option "AGPMode" "4"
    (**) RADEON(0): Option "EnablePageFlip" "on"
    (**) RADEON(0): Option "RenderAccel" "on"
    (**) RADEON(0): Option "DynamicClocks" "on"
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 0.1.0
    ABI class: X.Org Video Driver, version 4.1
    (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (--) RADEON(0): Chipset: "ATI Radeon Mobility M7 LW (AGP)" (ChipID = 0x4c57)
    (--) RADEON(0): Linear framebuffer at 0x00000000e0000000
    (II) RADEON(0): AGP card detected
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
    (II) RADEON(0): initializing int10
    (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    (II) RADEON(0): Legacy BIOS detected
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: drmOpenMinor returns 9
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
    (**) RADEON(0): Page Flipping enabled
    (II) RADEON(0): Will try to use DMA for Xv image transfers
    (II) RADEON(0): Detected total video RAM=32768K, accessible=65536K (PCI BAR=131072K)
    (--) RADEON(0): Mapped VideoRAM: 32768 kByte (64 bit DDR SDRAM)
    (II) RADEON(0): Color tiling enabled by default
    (II) RADEON(0): Max desktop size set to 2048x1200
    (II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
    (II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEON(0): ref_freq: 2700, min_out_pll: 12000, max_out_pll: 35000, min_in_pll: 40, max_in_pll: 3000, xclk: 18300, sclk: 183.000000, mclk: 260.000000
    (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=12000 max=35000; xclk=18300
    (II) RADEON(0): Bios Connector table:
    (II) RADEON(0): Port0: DDCType-0x60, DACType-1, TMDSType-1, ConnectorType-1
    (II) RADEON(0): Port1: DDCType-0x64, DACType-2, TMDSType-1, ConnectorType-3
    (II) RADEON(0): Port4: DDCType-0x0, DACType-0, TMDSType-0, ConnectorType-7
    (II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
    (II) RADEON(0): Output VGA-0 using monitor section My Monitor
    (II) RADEON(0): I2C bus "VGA-0" initialized.
    (II) RADEON(0): Output DVI-0 has no monitor section
    (II) RADEON(0): DFP table revision: 2
    (II) RADEON(0): I2C bus "DVI-0" initialized.
    (II) RADEON(0): Output LVDS has no monitor section
    (II) RADEON(0): Panel ID string: 1024x768
    (II) RADEON(0): Panel Size from BIOS: 1024x768
    (II) RADEON(0): BIOS provided dividers will be used.
    (WW) RADEON(0): LVDS Info:
    XRes: 1024, YRes: 768, DotClock: 65000
    HBlank: 320, HOverPlus: 16, HSyncWidth: 136
    VBlank: 38, VOverPlus: 2, VSyncWidth: 6
    (II) RADEON(0): Output S-video has no monitor section
    (II) RADEON(0): Default TV standard: NTSC
    (II) RADEON(0): TV standards supported by chip: NTSC PAL NTSC-J
    (II) RADEON(0): Port0:
    Monitor -- AUTO
    Connector -- VGA
    DAC Type -- Primary
    TMDS Type -- None
    DDC Type -- 0x60
    (II) RADEON(0): Port1:
    Monitor -- AUTO
    Connector -- DVI-D
    DAC Type -- None
    TMDS Type -- Internal
    DDC Type -- 0x64
    (II) RADEON(0): Port2:
    Monitor -- AUTO
    Connector -- LVDS
    DAC Type -- None
    TMDS Type -- None
    DDC Type -- 0x0
    (II) RADEON(0): Port3:
    Monitor -- AUTO
    Connector -- STV
    DAC Type -- TVDAC/ExtDAC
    TMDS Type -- None
    DDC Type -- 0x0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    finished output detect: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    finished output detect: 1
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    finished output detect: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    finished output detect: 3
    finished all detect
    before xf86InitialConfiguration
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1024x768
    (WW) RADEON(0): Mode 1280x1024 is out of range.
    (WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
    (II) RADEON(0): Adding Screen mode: 800x600
    (II) RADEON(0): Adding Screen mode: 640x480
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) RADEON(0): Output VGA-0 disconnected
    (II) RADEON(0): Output DVI-0 disconnected
    (II) RADEON(0): Output LVDS connected
    (II) RADEON(0): Output S-video disconnected
    (II) RADEON(0): Using exact sizes for initial modes
    (II) RADEON(0): Output LVDS using initial mode 1024x768
    after xf86InitialConfiguration
    (==) RADEON(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) RADEON(0): Using XAA acceleration architecture
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.2.1
    ABI class: X.Org Video Driver, version 4.1
    (==) RADEON(0): Assuming overlay scaler buffer width is 1536
    (II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
    (!!) RADEON(0): For information on using the multimedia capabilities
    of this adapter, please see http://gatos.sf.net.
    (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) RADEON(0): RADEONScreenInit e0000000 0 0
    Entering TV Save
    Save TV timing tables
    saveTimingTables: reading timing tables
    TV Save done
    (II) RADEON(0): Dynamic Clock Scaling Enabled
    (==) RADEON(0): Using 24 bit depth buffer
    (II) RADEON(0): RADEONInitMemoryMap() :
    (II) RADEON(0): mem_size : 0x04000000
    (II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
    (II) RADEON(0): Depth moves disabled by default
    (II) RADEON(0): Using 8 MB GART aperture
    (II) RADEON(0): Using 1 MB for the ring buffer
    (II) RADEON(0): Using 2 MB for vertex/indirect buffers
    (II) RADEON(0): Using 5 MB for GART textures
    (II) RADEON(0): Memory manager initialized to (0,0) (1024,8191)
    (II) RADEON(0): Reserved area from (0,1024) to (1024,1026)
    (II) RADEON(0): Largest offscreen area available: 1024 x 7165
    (II) RADEON(0): Will use front buffer at offset 0x0
    (II) RADEON(0): Will use back buffer at offset 0x800000
    (II) RADEON(0): Will use depth buffer at offset 0xc00000
    (II) RADEON(0): Will use 16384 kb for textures at offset 0x1000000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: drmOpenMinor returns 10
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) RADEON(0): [drm] framebuffer handle = 0xe0000000
    (II) RADEON(0): [drm] added 1 reserved context for kernel
    (II) RADEON(0): X context handle = 0x1
    (II) RADEON(0): [drm] installed DRM signal handler
    (**) RADEON(0): Using AGP 4x
    (II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x8086/0x3340; Card 0x1002/0x4c57]
    (II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
    (II) RADEON(0): [agp] ring handle = 0xd0000000
    (II) RADEON(0): [agp] Ring mapped at 0xb5856000
    (II) RADEON(0): [agp] ring read ptr handle = 0xd0101000
    (II) RADEON(0): [agp] Ring read ptr mapped at 0xb803d000
    (II) RADEON(0): [agp] vertex/indirect buffers handle = 0xd0102000
    (II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb5656000
    (II) RADEON(0): [agp] GART texture map handle = 0xd0302000
    (II) RADEON(0): [agp] GART Texture map mapped at 0xb5176000
    (II) RADEON(0): [drm] register handle = 0xc0100000
    (II) RADEON(0): [dri] Visual configs initialized
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000 0x1fff0000
    (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
    (==) RADEON(0): Backing store disabled
    (II) RADEON(0): [DRI] installation complete
    (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
    (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
    (II) RADEON(0): [drm] dma control initialized, using IRQ 11
    (II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
    (WW) RADEON(0): DRI init changed memory map, adjusting ...
    (WW) RADEON(0): MC_FB_LOCATION was: 0xe3ffe000 is: 0xe3ffe000
    (WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xd07fd000
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000 0xe3ffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0xd07fd000
    (II) RADEON(0): Direct rendering enabled
    (II) RADEON(0): Render acceleration enabled
    (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Lines
    Scanline Image Writes
    Setting up tile and stipple cache:
    32 128x128 slots
    32 256x256 slots
    16 512x512 slots
    (II) RADEON(0): Acceleration enabled
    (II) RADEON(0): DPMS enabled
    (==) RADEON(0): Silken mouse enabled
    (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00402000
    (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00406000
    (II) RADEON(0): Largest offscreen area available: 1024 x 7157
    (II) RADEON(0): Detected Radeon Mobility M7, disabling multimedia i2c
    (II) Loading sub module "theatre_detect"
    (II) LoadModule: "theatre_detect"
    (II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
    (II) Module theatre_detect: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
    (II) RADEON(0): no multimedia table present, disabling Rage Theatre.
    (II) RADEON(0): Set up overlay video
    (II) RADEON(0): Set up textured video
    init memmap
    init common
    init crtc1
    init pll1
    restore memmap
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000 0xe3ffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0xd07fd000
    restore common
    restore crtc1
    restore pll1
    restore LVDS
    (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (WW) RADEON(0): Option "BIOSHotkeys" is not used
    (--) RandR disabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/radeon_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) RADEON(0): Setting screen physical size to 270 x 203
    (II) Synaptics touchpad driver version 0.99.3
    (--) SynapticsMouse1 auto-dev sets device to /dev/input/event8
    (**) Option "Device" "/dev/input/event8"
    (II) SynapticsMouse1: x-axis range 1472 - 5472
    (II) SynapticsMouse1: y-axis range 1408 - 4448
    (II) SynapticsMouse1: pressure range 0 - 255
    (II) SynapticsMouse1: finger width range 0 - 0
    (II) SynapticsMouse1: buttons: left right middle double triple
    (**) Option "SHMConfig" "on"
    (**) Option "LeftEdge" "1700"
    (**) Option "RightEdge" "5300"
    (**) Option "TopEdge" "1700"
    (**) Option "BottomEdge" "4200"
    (**) Option "FingerLow" "25"
    (**) Option "FingerHigh" "30"
    (**) Option "MaxTapTime" "180"
    (**) Option "MaxTapMove" "220"
    (**) Option "VertScrollDelta" "100"
    (--) SynapticsMouse1 touchpad found
    (**) Option "AlwaysCore"
    (**) SynapticsMouse1: always reports core events
    (II) evaluating device (SynapticsMouse1)
    (II) XINPUT: Adding extended input device "SynapticsMouse1" (type: TOUCHPAD)
    (--) SynapticsMouse1 touchpad found
    (II) RADEON(0): Damage tracking initialized for page flipping
    (EE) config/hal: couldn't initialise context: (null) ((null))
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1024x768
    (WW) RADEON(0): Mode 1280x1024 is out of range.
    (WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
    (II) RADEON(0): Adding Screen mode: 800x600
    (II) RADEON(0): Adding Screen mode: 640x480
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1024x768
    (WW) RADEON(0): Mode 1280x1024 is out of range.
    (WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
    (II) RADEON(0): Adding Screen mode: 800x600
    (II) RADEON(0): Adding Screen mode: 640x480
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1024x768
    (WW) RADEON(0): Mode 1280x1024 is out of range.
    (WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
    (II) RADEON(0): Adding Screen mode: 800x600
    (II) RADEON(0): Adding Screen mode: 640x480
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1024x768
    (WW) RADEON(0): Mode 1280x1024 is out of range.
    (WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
    (II) RADEON(0): Adding Screen mode: 800x600
    (II) RADEON(0): Adding Screen mode: 640x480
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) UnloadModule: "synaptics"
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0x1fff0000 0xe3ffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0x27ff2000
    finished PLL2
    Entering Restore TV
    Restore TV PLL
    Restore TVHV
    Restore TV Restarts
    Restore Timing Tables
    Restore TV standard
    Leaving Restore TV
    (II) RADEON(0): [drm] removed 1 reserved context for kernel
    (II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf8046000 at 0xb803e000
    (II) RADEON(0): [drm] Closed DRM master.
    Last edited by eg4matze (2009-01-12 12:47:16)

    hal couldnt start, I rebuild it with abs, now everything works

  • ATI driver issues and slow video playback

    I just reinstalled Arch and I installed the ATI drivers, at first I couldn't get them working but when I did, video in full screen was amazingly slow, so I tried installing ati-drivers-arch, as someone in the boards suggested but after that each time I start X, it would crash my computer, so right now I am using the standard vesa driver to even start X.
    Also when trying to resize mplayer (while using -vo gl) it says my computer is too slow. And VLC has no speed issues but the quality of the picture is very poor.
    I am running:
    AMD Athlon 64 3200+
    ATI Radeon X800 GTO
    1.5 gb of DDR RAM
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5x) man page for details about the format of
    # this file.
    # Module section -- this  section  is used to specify
    # which dynamically loadable modules to load.
    Section "Module"
    # This loads the DBE extension module.
        Load        "dbe"      # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
        SubSection  "extmod"
          Option    "omit xfree86-dga"   # don't initialise the DGA extension
        EndSubSection
    # This loads the font modules
    #    Load        "type1"
    #    Load        "speedo"
        Load        "freetype"
    #    Load        "xtt"
    # This loads the GLX module
        Load       "glx"
    # This loads the DRI module
    #    Load       "dri"
    EndSection
    # Files section.  This allows default font and rgb paths to be set
    Section "Files"
    # The location of the RGB database.  Note, this is the name of the
    # file minus the extension (like ".txt" or ".db").  There is normally
    # no need to change the default.
        RgbPath    "/usr/share/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
        FontPath   "/usr/share/fonts/misc"
        FontPath   "/usr/share/fonts/75dpi"
        FontPath   "/usr/share/fonts/100dpi"
        FontPath   "/usr/share/fonts/TTF"
        FontPath   "/usr/share/fonts/Type1"
    #    FontPath   "/usr/lib/X11/fonts/local/"
    #    FontPath   "/usr/lib/X11/fonts/misc/"
    #    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
    #    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
    #    FontPath   "/usr/lib/X11/fonts/Speedo/"
    #    FontPath   "/usr/lib/X11/fonts/Type1/"
    #    FontPath   "/usr/lib/X11/fonts/TrueType/"
    #    FontPath   "/usr/lib/X11/fonts/freefont/"
    #    FontPath   "/usr/lib/X11/fonts/75dpi/"
    #    FontPath   "/usr/lib/X11/fonts/100dpi/"
    # The module search path.  The default path is shown here.
    #    ModulePath "/usr/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #    Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12).  This allows clients to receive these key
    # events.
    #    Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #    Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #    Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    #    Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    #    Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    #    Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    #    Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
        Identifier    "Keyboard1"
        Driver    "kbd"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    #    Option     "Protocol"      "Xqueue"
        Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    #    Option    "Xleds"      "1 2 3"
    #    Option "LeftAlt"     "Meta"
    #    Option "RightAlt"    "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults).  For example, for a non-U.S.
    # keyboard, you will probably want to use:
    #    Option "XkbModel"    "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    #    Option "XkbModel"    "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    #    Option "XkbLayout"   "de"
    # or:
    #    Option "XkbLayout"   "de"
    #    Option "XkbVariant"  "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    #    Option "XkbOptions"  "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    #    Option "XkbRules"    "xorg"
    #    Option "XkbModel"    "pc105"
    #    Option "XkbLayout"   "us"
    #    Option "XkbVariant"  ""
    #    Option "XkbOptions"  ""
    #    Option "XkbDisable"
        Option "XkbRules"    "xorg"
        Option "XkbModel"    "dell101"
        Option "XkbLayout"    "us"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
        Identifier    "Mouse1"
        Driver    "mouse"
        Option "Protocol"    "PS/2"    # PS/2 Mouse
        Option "Device"      "/dev/psaux"
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.
    #    Option "Protocol"    "Xqueue"
    # Mouse-speed setting for PS/2 mouse.
    #    Option "Resolution"    "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    #    Option "BaudRate"    "9600"
    #    Option "SampleRate"    "150"
    # Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
        Option "ZAxisMapping"   "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
        Option "Emulate3Buttons"
    #    Option "Emulate3Timeout"    "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    #    Option "ChordMiddle"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices.  This is for example only.  Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    #    Identifier  "Mouse2"
    #    Driver      "mouse"
    #    Option      "Protocol"      "MouseMan"
    #    Option      "Device"        "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    #    Identifier "spaceball"
    #    Driver     "magellan"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    #    Identifier "spaceball2"
    #    Driver     "spaceorb"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    #    Identifier "touchscreen0"
    #    Driver     "microtouch"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "1412"
    #    Option     "MaxX"          "15184"
    #    Option     "MinY"          "15372"
    #    Option     "MaxY"          "1230"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    #    Identifier "touchscreen1"
    #    Driver     "elo2300"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "231"
    #    Option     "MaxX"          "3868"
    #    Option     "MinY"          "3858"
    #    Option     "MaxY"          "272"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonThreshold"       "17"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
        Identifier  "ati"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
        HorizSync   31.5 - 48.5
    #    HorizSync    30-64         # multisync
    #    HorizSync    31.5, 35.2    # multiple fixed sync frequencies
    #    HorizSync    15-25, 30-50  # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
        VertRefresh 50-70
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    Section "Device"
        Identifier    "Standard VGA"
        VendorName    "Unknown"
        BoardName    "Unknown"
    # The chipset line is optional in most cases.  It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    #    Chipset    "generic"
    # The Driver line must be present.  When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module.  Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
        Driver     "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for.  When this line isn't present, a device
    # section can only match up with the primary video device.  For PCI
    # devices a line like the following could be used.  This line should not
    # normally be included unless there is more than one video device
    # intalled.
    #    BusID      "PCI:0:10:0"
    #    VideoRam    256
    #    Clocks    25.2 28.3
    EndSection
    # Device configured by xorgconfig:
    Section "Device"
        Identifier  "ati1"
        Driver      "vesa"
        # unsupported card
        VideoRam    262144
        # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present.  Each describes
    # the configuration of a single screen.  A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
        Identifier  "Screen 1"
        Device      "ati1"
        Monitor     "ati"
        DefaultDepth 24
        Subsection "Display"
            Depth       8
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       16
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       24
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present.  Each describes
    # the way multiple screens are organised.  A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option.  In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
        Identifier  "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens.  The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen.  In this example, screen 2 is located to the
    # right of screen 1.
        Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used.  Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
        InputDevice "Mouse1" "CorePointer"
        InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    # Section "DRI"
    #    Mode 0666
    # EndSection
    A big thank you to anyone who can help!

    It doesn't look like xorg 7 has been installed.  The latest kernel 2.6.15 needs xorg 7, udev, and initrd .
    I may be wrong but my xorg is much smaller in size and fonts are handled differently in the latest kernels. 
    Please see the blogs concerning the upgrades to the xorg 7 changes.

  • XORG: Keyboard don't work right

    Hi,
    after the last System update my keyboard (under xorg) is totally messed up! The arrow keys,the del key the Pos1 key, the End key.....  all don't work. All characters numbers and special characters like(!"§$%&/....) work though. Even the German "Umlauts" are working!
    Here my xorg.conf:
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # Module section -- this  section  is used to specify
    # which dynamically loadable modules to load.
    Section "Module"
    # This loads the DBE extension module.
        Load        "dbe"   # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
        SubSection  "extmod"
          Option    "omit xfree86-dga"   # don't initialise the DGA extension
        EndSubSection
    # This loads the font modules
    #    Load        "type1"
        Load        "freetype"
    #    Load        "xtt"
    # This loads the GLX module
    #    Load       "glx"
    # This loads the DRI module
    #    Load       "dri"
    EndSection
    # Files section.  This allows default font and rgb paths to be set
    Section "Files"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
        FontPath   "/usr/share/fonts/misc"
        FontPath   "/usr/share/fonts/100dpi:unscaled"
        FontPath   "/usr/share/fonts/75dpi:unscaled"
        FontPath   "/usr/share/fonts/TTF"
        FontPath   "/usr/share/fonts/Type1"
    #    FontPath   "/usr/lib/X11/fonts/local/"
    #    FontPath   "/usr/lib/X11/fonts/misc/"
    #    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
    #    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
    #    FontPath   "/usr/lib/X11/fonts/Type1/"
    #    FontPath   "/usr/lib/X11/fonts/TrueType/"
    #    FontPath   "/usr/lib/X11/fonts/freefont/"
    #    FontPath   "/usr/lib/X11/fonts/75dpi/"
    #    FontPath   "/usr/lib/X11/fonts/100dpi/"
    # The module search path.  The default path is shown here.
    #    ModulePath "/usr/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #    Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12).  This allows clients to receive these key
    # events.
    #    Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #    Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #    Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    #    Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    #    Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    #    Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    #    Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
        Identifier  "Keyboard1"
        Driver      "kbd"
        Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    #    Option     "Xleds"      "1 2 3"
    #    Option "LeftAlt"     "Meta"
    #    Option "RightAlt"    "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults).  For example, for a non-U.S.
    # keyboard, you will probably want to use:
    #    Option "XkbModel"    "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    #    Option "XkbModel"    "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    #    Option "XkbLayout"   "de"
    # or:
    #    Option "XkbLayout"   "de"
    #    Option "XkbVariant"  "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    #    Option "XkbOptions"  "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    #    Option "XkbRules"    "xorg"
    #    Option "XkbModel"    "pc105"
    #    Option "XkbLayout"   "us"
    #    Option "XkbVariant"  ""
    #    Option "XkbOptions"  ""
    #    Option "XkbDisable"
        Option "XkbRules"   "xorg"
        Option "XkbModel"   "pc105"
        Option "XkbLayout"  "de"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
        Identifier  "Mouse1"
        Driver      "mouse"
        Option "Protocol"    "Auto" # Auto detect
        Option "Device"      "/dev/input/mice"
    # Mouse-speed setting for PS/2 mouse.
    #    Option "Resolution"        "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    #    Option "BaudRate"  "9600"
    #    Option "SampleRate"        "150"
    # Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
        Option "ZAxisMapping"   "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
        Option "Emulate3Buttons"
    #    Option "Emulate3Timeout"    "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    #    Option "ChordMiddle"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices.  This is for example only.  Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    #    Identifier  "Mouse2"
    #    Driver      "mouse"
    #    Option      "Protocol"      "MouseMan"
    #    Option      "Device"        "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    #    Identifier "spaceball"
    #    Driver     "magellan"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    #    Identifier "spaceball2"
    #    Driver     "spaceorb"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    #    Identifier "touchscreen0"
    #    Driver     "microtouch"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "1412"
    #    Option     "MaxX"          "15184"
    #    Option     "MinY"          "15372"
    #    Option     "MaxY"          "1230"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    #    Identifier "touchscreen1"
    #    Driver     "elo2300"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "231"
    #    Option     "MaxX"          "3868"
    #    Option     "MinY"          "3858"
    #    Option     "MaxY"          "272"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonThreshold"       "17"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
        Identifier  "My Monitor"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
        HorizSync   31.5 - 64.3
    #    HorizSync  30-64         # multisync
    #    HorizSync  31.5, 35.2    # multiple fixed sync frequencies
    #    HorizSync  15-25, 30-50  # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
        VertRefresh 50-100
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    Section "Device"
        Identifier  "Standard VGA"
        VendorName  "Unknown"
        BoardName   "Unknown"
    # The chipset line is optional in most cases.  It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    #    Chipset    "generic"
    # The Driver line must be present.  When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module.  Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
        Driver     "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for.  When this line isn't present, a device
    # section can only match up with the primary video device.  For PCI
    # devices a line like the following could be used.  This line should not
    # normally be included unless there is more than one video device
    # intalled.
    #    BusID      "PCI:0:10:0"
    #    VideoRam   256
    #    Clocks     25.2 28.3
    EndSection
    # Device configured by xorgconfig:
    Section "Device"
        Identifier  "** ATI Radeon (generic)               [radeon]"
        Driver      "radeon"
        #VideoRam    262144
        # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present.  Each describes
    # the configuration of a single screen.  A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
        Identifier  "Screen 1"
        Device      "** ATI Radeon (generic)               [radeon]"
        Monitor     "My Monitor"
        DefaultDepth 24
        Subsection "Display"
            Depth       8
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       16
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       24
            Modes       "1400x1050" "1280x1024" "1024x768"
            ViewPort    0 0
        EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present.  Each describes
    # the way multiple screens are organised.  A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option.  In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
        Identifier  "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens.  The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen.  In this example, screen 2 is located to the
    # right of screen 1.
        Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used.  Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
        InputDevice "Mouse1" "CorePointer"
        InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    # Section "DRI"
    #    Mode 0666
    # EndSection
    and the corresponding log:
    X.Org X Server 1.5.3
    Release Date: 5 November 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.27-ARCH i686
    Current Operating System: Linux stella 2.6.27-ARCH #1 SMP PREEMPT Fri Nov 28 10:56:24 UTC 2008 i686
    Build Date: 05 December 2008  09:10:55PM
            Before reporting problems, check http://wiki.x.org
            to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
            (++) from command line, (!!) notice, (II) informational,
            (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec  9 17:03:13 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "Screen 1" (0)
    (**) |   |-->Monitor "My Monitor"
    (**) |   |-->Device "** ATI Radeon (generic)               [radeon]"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
            /usr/share/fonts/misc,
            /usr/share/fonts/100dpi:unscaled,
            /usr/share/fonts/75dpi:unscaled,
            /usr/share/fonts/TTF,
            /usr/share/fonts/Type1,
            /usr/share/fonts/misc,
            /usr/share/fonts/100dpi:unscaled,
            /usr/share/fonts/75dpi:unscaled,
            /usr/share/fonts/TTF,
            /usr/share/fonts/Type1
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
    (WW) Disabling Mouse1
    (WW) Disabling Keyboard1
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Loader magic: 0x81d5900
    (II) Module ABI versions:
            X.Org ANSI C Emulation: 0.4
            X.Org Video Driver: 4.1
            X.Org XInput driver : 2.1
            X.Org Server Extension : 1.1
            X.Org Font Renderer : 0.6
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@1:0:0) ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] rev 0, Mem @ 0xa8000000/0, 0xe0010000/0, I/O @ 0x0000c100/0, BIOS @ 0x????????/131072
    (II) System resource ranges:
            [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[b]
            [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
            [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
            [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
            [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
            [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded by default.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded by default.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 1.0.0
            Module class: X.Org Server Extension
            ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 1.0.0
            Module class: X.Org Server Extension
            ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
            compiled for 1.5.3, module version = 2.1.0
            Module class: X.Org Font Renderer
            ABI class: X.Org Font Renderer, version 0.6
    (II) Loading font FreeType
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 1.0.0
            ABI class: X.Org Server Extension, version 1.1
    (==) AIGLX enabled
    (==) Exporting typical set of GLX visuals
    (II) Loading extension GLX
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 1.0.0
            ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "radeon"
    (II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
            compiled for 1.5.2, module version = 6.9.0
            Module class: X.Org Video Driver
            ABI class: X.Org Video Driver, version 4.1
    (II) RADEON: Driver for ATI Radeon chipsets:
            ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
            ATI Radeon Mobility X300 (M24) 3152 (PCIE),
            ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
            ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
            ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
            ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
            ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
            ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
            ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
            ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
            ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
            ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
            ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
            ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
            ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
            ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
            ATI Radeon X800PRO (R420) JI (AGP),
            ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
            ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
            ATI Radeon Mobility 9800 (M18) JN (AGP),
            ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
            ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
            ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
            ATI Radeon Mobility M7 LW (AGP),
            ATI Mobility FireGL 7800 M7 LX (AGP),
            ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
            ATI FireGL Mobility 9000 (M9) Ld (AGP),
            ATI Radeon Mobility 9000 (M9) Lf (AGP),
            ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
            ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
            ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
            ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
            ATI Radeon 9800XT NJ (AGP),
            ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
            ATI Radeon Mobility 9600 (M10) NQ (AGP),
            ATI Radeon Mobility 9600 (M11) NR (AGP),
            ATI Radeon Mobility 9600 (M10) NS (AGP),
            ATI FireGL Mobility T2 (M10) NT (AGP),
            ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
            ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
            ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
            ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
            ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
            ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
            ATI Radeon Mobility X300 (M22) 5460 (PCIE),
            ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
            ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
            ATI Radeon X800PRO (R423) UI (PCIE),
            ATI Radeon X800LE (R423) UJ (PCIE),
            ATI Radeon X800SE (R423) UK (PCIE),
            ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
            ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
            ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
            ATI FireGL unknown (R423) UR (PCIE),
            ATI FireGL unknown (R423) UT (PCIE),
            ATI Mobility FireGL V5000 (M26) (PCIE),
            ATI Mobility FireGL V5000 (M26) (PCIE),
            ATI Mobility Radeon X700 XL (M26) (PCIE),
            ATI Mobility Radeon X700 (M26) (PCIE),
            ATI Mobility Radeon X700 (M26) (PCIE),
            ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
            ATI Radeon Mobility 9100 IGP (U3) 5835,
            ATI Radeon XPRESS 200 5954 (PCIE),
            ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
            ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
            ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
            ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
            ATI Radeon XPRESS 200M 5975 (PCIE),
            ATI Radeon XPRESS 200 5A41 (PCIE),
            ATI Radeon XPRESS 200M 5A42 (PCIE),
            ATI Radeon XPRESS 200 5A61 (PCIE),
            ATI Radeon XPRESS 200M 5A62 (PCIE),
            ATI Radeon X300 (RV370) 5B60 (PCIE),
            ATI Radeon X600 (RV370) 5B62 (PCIE),
            ATI Radeon X550 (RV370) 5B63 (PCIE),
            ATI FireGL V3100 (RV370) 5B64 (PCIE),
            ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
            ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
            ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
            ATI Mobility Radeon X800 XT (M28) (PCIE),
            ATI Mobility FireGL V5100 (M28) (PCIE),
            ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
            ATI Radeon X850 XT PE (R480) (PCIE),
            ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
            ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
            ATI Radeon X850 XT (R480) (PCIE),
            ATI Radeon X800XT (R423) 5D57 (PCIE),
            ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
            ATI Radeon X700 PRO (RV410) (PCIE),
            ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
            ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
            ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
            ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
            ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
            ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
            ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
            ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
            ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
            ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
            ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
            ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
            ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
            ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
            ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
            ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
            ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
            ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
            ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
            ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
            ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
            ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
            ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
            ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
            ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
            ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
            ATI Mobility Radeon X1700, ATI Radeon X2300HD,
            ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
            ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
            ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
            ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
            ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
            ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
            ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
            ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI ATI FireGL V7400,
            ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
            ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
            ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
            ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
            ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
            ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
            ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
            ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
            ATI Radeon 4800 Series, ATI RV610, ATI Radeon HD 2400 XT,
            ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
            ATI RV610, ATI ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
            ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, ATI RV670,
            ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
            ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850, ATI RV630,
            ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
            ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
            ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
            ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
            ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Radeon HD 3470,
            ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Mobility Radeon HD 3430,
            ATI Mobility Radeon HD 3400 Series, ATI FireMV 2450, ATI FireMV 2260,
            ATI FireMV 2260, ATI ATI Radeon HD 3600 Series,
            ATI ATI Radeon HD 3650 AGP, ATI ATI Radeon HD 3600 PRO,
            ATI ATI Radeon HD 3600 XT, ATI ATI Radeon HD 3600 PRO,
            ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
            ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
            ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics
    (II) Primary Device is: PCI 01@00:00:0
    (II) resource ranges after xf86ClaimFixedResources() call:
            [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[b]
            [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
            [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
            [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
            [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
            [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
            [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[b]
            [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
            [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
            [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
            [4] 0   0       0x000a0000 - 0x000affff (0x10000) MS[b]
            [5] 0   0       0x000b0000 - 0x000b7fff (0x8000) MS[b]
            [6] 0   0       0x000b8000 - 0x000bffff (0x8000) MS[b]
            [7] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
            [8] -1  0       0x00000000 - 0x00000000 (0x1) IX[b]
            [9] 0   0       0x000003b0 - 0x000003bb (0xc) IS[b]
            [10] 0  0       0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) RADEON(0): MMIO registers at 0x00000000e0010000: size 64KB
    (II) RADEON(0): PCI bus 1 card 0 func 0
    (**) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 0.1.0
            ABI class: X.Org Video Driver, version 4.1
    (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (--) RADEON(0): Chipset: "ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP)" (ChipID = 0x4e50)
    (--) RADEON(0): Linear framebuffer at 0x00000000a8000000
    (II) RADEON(0): AGP card detected
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 1.0.0
            ABI class: X.Org Video Driver, version 4.1
    (II) RADEON(0): initializing int10
    (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    (II) RADEON(0): Legacy BIOS detected
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: drmOpenMinor returns 9
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
    (==) RADEON(0): Page Flipping disabled
    (II) RADEON(0): Will try to use DMA for Xv image transfers
    (II) RADEON(0): Generation 2 PCI interface, using max accessible memory
    (II) RADEON(0): Detected total video RAM=65536K, accessible=131072K (PCI BAR=131072K)
    (--) RADEON(0): Mapped VideoRAM: 65536 kByte (128 bit DDR SDRAM)
    (II) RADEON(0): Color tiling enabled by default
    (II) RADEON(0): Max desktop size set to 2560x1200
    (II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
    (II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 35000, min_in_pll: 40, max_in_pll: 3000, xclk: 20000, sclk: 200.000000, mclk: 390.000000
    (II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000 max=35000; xclk=20000
    (II) RADEON(0): Bios Connector table:
    (II) RADEON(0): Port0: DDCType-0x60, DACType-1, TMDSType-1, ConnectorType-1
    (II) RADEON(0): Port4: DDCType-0x0, DACType-0, TMDSType-0, ConnectorType-7
    (II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
    (II) RADEON(0): Output VGA-0 using monitor section My Monitor
    (II) RADEON(0): I2C bus "VGA-0" initialized.
    (II) RADEON(0): Output LVDS has no monitor section
    (II) RADEON(0): Panel ID string: AUO                     
    (II) RADEON(0): Panel Size from BIOS: 1400x1050
    (II) RADEON(0): BIOS provided dividers will be used.
    (WW) RADEON(0): LVDS Info:
    XRes: 1400, YRes: 1050, DotClock: 108000
    HBlank: 240, HOverPlus: 48, HSyncWidth: 112
    VBlank: 15, VOverPlus: 1, VSyncWidth: 3
    (II) RADEON(0): Output S-video has no monitor section
    (II) RADEON(0): Default TV standard: NTSC
    (II) RADEON(0): TV standards supported by chip: NTSC PAL
    (II) RADEON(0): Port0:
    Monitor   -- AUTO
    Connector -- VGA
    DAC Type  -- Primary
    TMDS Type -- None
    DDC Type  -- 0x60
    (II) RADEON(0): Port1:
    Monitor   -- AUTO
    Connector -- LVDS
    DAC Type  -- None
    TMDS Type -- None
    DDC Type  -- 0x0
    (II) RADEON(0): Port2:
    Monitor   -- AUTO
    Connector -- STV
    DAC Type  -- TVDAC/ExtDAC
    TMDS Type -- None
    DDC Type  -- 0x0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    finished output detect: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    finished output detect: 1
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    finished output detect: 2
    finished all detect
    before xf86InitialConfiguration
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1400x1050
    (II) RADEON(0): Adding Screen mode: 1280x1024
    (II) RADEON(0): Adding Screen mode: 1024x768
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) RADEON(0): Output VGA-0 disconnected
    (II) RADEON(0): Output LVDS connected
    (II) RADEON(0): Output S-video disconnected
    (II) RADEON(0): Using user preference for initial modes
    (II) RADEON(0): Output LVDS using initial mode 1400x1050
    after xf86InitialConfiguration
    (==) RADEON(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 1.0.0
            ABI class: X.Org ANSI C Emulation, version 0.4
    (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) RADEON(0): Using XAA acceleration architecture
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 1.2.0
            ABI class: X.Org Video Driver, version 4.1
    (==) RADEON(0): Assuming overlay scaler buffer width is 1920
    (II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
    (!!) RADEON(0): For information on using the multimedia capabilities
            of this adapter, please see http://gatos.sf.net.
    (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC?  No, I don't.
    (II) resource ranges after preInit:
            [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[b]
            [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
            [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
            [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
            [4] 0   0       0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
            [5] 0   0       0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
            [6] 0   0       0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
            [7] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
            [8] -1  0       0x00000000 - 0x00000000 (0x1) IX[b]
            [9] 0   0       0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
            [10] 0  0       0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) RADEON(0): RADEONScreenInit a8000000 0 0
    Entering TV Save
    Save TV timing tables
    saveTimingTables: reading timing tables
    TV Save done
    (II) RADEON(0): Dynamic Clock Scaling Disabled
    (==) RADEON(0): Using 24 bit depth buffer
    (II) RADEON(0): RADEONInitMemoryMap() :
    (II) RADEON(0):   mem_size         : 0x04000000
    (II) RADEON(0):   MC_FB_LOCATION   : 0xabffa800
    (II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
    (II) RADEON(0): Depth moves disabled by default
    (II) RADEON(0): Using 32 MB GART aperture
    (II) RADEON(0): Using 1 MB for the ring buffer
    (II) RADEON(0): Using 2 MB for vertex/indirect buffers
    (II) RADEON(0): Using 29 MB for GART textures
    (II) RADEON(0): Memory manager initialized to (0,0) (1408,8191)
    (II) RADEON(0): Reserved area from (0,1200) to (1408,1202)
    (II) RADEON(0): Largest offscreen area available: 1408 x 6989
    (II) RADEON(0): Will use front buffer at offset 0x0
    (II) RADEON(0): Will use back buffer at offset 0xd10000
    (II) RADEON(0): Will use depth buffer at offset 0x1382000
    (II) RADEON(0): Will use 38912 kb for textures at offset 0x19f4000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: drmOpenMinor returns 10
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) RADEON(0): [drm] framebuffer handle = 0xa8000000
    (II) RADEON(0): [drm] added 1 reserved context for kernel
    (II) RADEON(0): X context handle = 0x1
    (II) RADEON(0): [drm] installed DRM signal handler
    (==) RADEON(0): Using AGP 4x
    (II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x8086/0x3340; Card 0x1002/0x4e50]
    (II) RADEON(0): [agp] 32768 kB allocated with handle 0x00000001
    (II) RADEON(0): [agp] ring handle = 0xb0000000
    (II) RADEON(0): [agp] Ring mapped at 0xb37a2000
    (II) RADEON(0): [agp] ring read ptr handle = 0xb0101000
    (II) RADEON(0): [agp] Ring read ptr mapped at 0xb7f7a000
    (II) RADEON(0): [agp] vertex/indirect buffers handle = 0xb0102000
    (II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb35a2000
    (II) RADEON(0): [agp] GART texture map handle = 0xb0302000
    (II) RADEON(0): [agp] GART Texture map mapped at 0xb1922000
    (II) RADEON(0): [drm] register handle = 0xe0010000
    (II) RADEON(0): [dri] Visual configs initialized
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0):   MC_FB_LOCATION   : 0xabffa800 0x1fff0000
    (II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
    (==) RADEON(0): Backing store disabled
    (II) RADEON(0): [DRI] installation complete
    (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
    (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
    (II) RADEON(0): [drm] dma control initialized, using IRQ 10
    (II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
    (WW) RADEON(0): DRI init changed memory map, adjusting ...
    (WW) RADEON(0):   MC_FB_LOCATION  was: 0xabffa800 is: 0xabffa800
    (WW) RADEON(0):   MC_AGP_LOCATION was: 0xffffffc0 is: 0xb1ffb000
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0):   MC_FB_LOCATION   : 0xabffa800 0xabffa800
    (II) RADEON(0):   MC_AGP_LOCATION  : 0xb1ffb000
    (II) RADEON(0): Direct rendering enabled
    (II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
    (II) RADEON(0): Render acceleration disabled
    (II) RADEON(0): num quad-pipes is 1
    (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
            Screen to screen bit blits
            Solid filled rectangles
            8x8 mono pattern filled rectangles
            Indirect CPU to Screen color expansion
            Solid Lines
            Scanline Image Writes
            Setting up tile and stipple cache:
                    32 128x128 slots
                    32 256x256 slots
                    16 512x512 slots
    (II) RADEON(0): Acceleration enabled
    (II) RADEON(0): DPMS enabled
    (==) RADEON(0): Silken mouse enabled
    (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00674c00
    (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00678e00
    (II) RADEON(0): Largest offscreen area available: 1408 x 6983
    (II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
    (II) Loading sub module "theatre_detect"
    (II) LoadModule: "theatre_detect"
    (II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
    (II) Module theatre_detect: vendor="X.Org Foundation"
            compiled for 1.5.2, module version = 1.0.0
            ABI class: X.Org Video Driver, version 4.1
    (II) RADEON(0): no multimedia table present, disabling Rage Theatre.
    (II) RADEON(0): Set up overlay video
    (II) RADEON(0): Set up textured video
    init memmap
    init common
    init crtc1
    init pll1
    restore memmap
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0):   MC_FB_LOCATION   : 0xabffa800 0xabffa800
    (II) RADEON(0):   MC_AGP_LOCATION  : 0xb1ffb000
    restore common
    restore crtc1
    restore pll1
    finished PLL1
    restore LVDS
    (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (--) RandR disabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) RADEON(0): Setting screen physical size to 370 x 277
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 0.99.1
            Module class: X.Org XInput Driver
            ABI class: X.Org XInput driver, version 2.1
    (II) Synaptics touchpad driver version 0.99.1
    (**) Option "Device" "/dev/input/event8"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
    (--) SynPS/2 Synaptics TouchPad touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (--) SynPS/2 Synaptics TouchPad touchpad found
    (II) config/hal: Adding input device Logitech USB Receiver
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
            compiled for 1.5.2, module version = 2.0.7
            Module class: X.Org XInput Driver
            ABI class: X.Org XInput driver, version 2.1
    (**) Logitech USB Receiver: always reports core events
    (**) Logitech USB Receiver: Device: "/dev/input/event4"
    (II) Logitech USB Receiver: Found keys
    (II) Logitech USB Receiver: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "base"
    (**) Logitech USB Receiver: xkb_rules: "base"
    (**) Option "xkb_model" "evdev"
    (**) Logitech USB Receiver: xkb_model: "evdev"
    (**) Option "xkb_layout" "us"
    (**) Logitech USB Receiver: xkb_layout: "us"
    (II) config/hal: Adding input device Logitech USB Receiver
    (**) Logitech USB Receiver: always reports core events
    (**) Logitech USB Receiver: Device: "/dev/input/event3"
    (II) Logitech USB Receiver: Found x and y relative axes
    (II) Logitech USB Receiver: Found mouse buttons
    (II) Logitech USB Receiver: Configuring as mouse
    (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
    (II) config/hal: Adding input device C-Media USB Headphone Set
    (**) C-Media USB Headphone Set: always reports core events
    (**) C-Media USB Headphone Set: Device: "/dev/input/event2"
    (II) C-Media USB Headphone Set: Found keys
    (II) C-Media USB Headphone Set: Configuring as keyboard
    (II) XINPUT: Adding extended input device "C-Media USB Headphone Set" (type: KEYBOARD)
    (**) Option "xkb_rules" "base"
    (**) C-Media USB Headphone Set: xkb_rules: "base"
    (**) Option "xkb_model" "evdev"
    (**) C-Media USB Headphone Set: xkb_model: "evdev"
    (**) Option "xkb_layout" "us"
    (**) C-Media USB Headphone Set: xkb_layout: "us"
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "base"
    (**) AT Translated Set 2 keyboard: xkb_rules: "base"
    (**) Option "xkb_model" "evdev"
    (**) AT Translated Set 2 keyboard: xkb_model: "evdev"
    (**) Option "xkb_layout" "us"
    (**) AT Translated Set 2 keyboard: xkb_layout: "us"
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Found mouse buttons
    (II) Macintosh mouse button emulation: Configuring as mouse
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1400x1050
    (II) RADEON(0): Adding Screen mode: 1280x1024
    (II) RADEON(0): Adding Screen mode: 1024x768
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    sorry for this huge post - but i think that's all needed.... so does anybody have a clue?
    thanks and bye
    smax

    Thanks Bob for that very fast reply!
    But neither "Modifying hal configuration" nor "Using the Desktop Environment settings" (xfce) worked. So I tried the "I don't want this crap, how do I turn it off?" solution and well it works
    Maybe I turn it back on in a month or so.. but for now i'm fine with no hot plugging but a working keyboard...
    Thanks and Bye!
    smax
    Last edited by smaxer (2008-12-09 17:42:43)

  • ITunes 12.1.0.71 has stopped working on windows 7

    I updated my itunes with the new 12.0.1 update. When the update finished, i restart my pc and then i can't open the itunes. "iTunes has stopped working". What should i do?
    iTunes, Windows 7

    Good Afternoon aperaf,
    If iTunes for Windows won't launch after the recent update, try these troubleshooting steps:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
    http://support.apple.com/en-is/HT203206
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues 
    If iTunes for Windows Vista or Windows 7 won't open, stops responding, or unexpectedly quits, try using the steps below. You may want to print this document before following these steps.
    Follow these steps if you're having issues installing iTunes.Start iTunes in Safe Mode
    Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
    Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
    Click Continue.
    See if the issue you're experiencing persists in Safe Mode.
    If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.Create a new user account
    By creating a new user account, you can determine if the issue affects a specific Windows user account or all accounts. Follow the steps below to create a new user account in Windows Vista or Windows 7:
    Choose Start > Control Panel.
    Open "Add or remove user accounts." (If you're using the Classic view in Windows Vista, open "User Accounts," and then open "Manage another account.")
    Select "Create a new account" and follow the instructions to set up the account.
    Once you create the new account, choose Start > Log Off.
    Log in to the new user account.
    Open iTunes and see if the issue you're experiencing persists in this new user account.
    If you have the same issue in the new user account, proceed to the "System-wide troubleshooting" section. If you don't experience the same issue, proceed to the "User-specific troubleshooting" section.User-specific troubleshooting
    If you experience the issue in one particular user account, the suggestions below may resolve the issue. Before proceeding, you'll need to make hidden files and folder visible in Windows using steps 1-5.
    Remove iTunes Preference files. Some of the files that iTunes stores settings and preferences in may be unusable. iTunes saves its preferences in two folders. Move one of them to the desktop and test to see if the issue persists. If it does, move it back and remove the second folder. The locations for the preference folders are:
    c:\Users\username\AppData\Local\Apple Computer\iTunes
    c:\Users\username\AppData\Roaming\Apple Computer\iTunes
    Create a new iTunes Library.
    Hold the Shift key while opening iTunes. You'll be asked to choose an iTunes library.
    Choose Create Library.
    In the following window, select a location to save the new iTunes Library.
    Click Save. iTunes will open the new library. After you close iTunes, you can always select the original library by holding the Shift key while opening iTunes.
    Recreate your iTunes Library. If your iTunes library has become unusable, rebuilding it may resolve the issue.
    Check for issues with content files. Sometimes an audio file can cause iTunes to quit unexpectedly or stop responding when it's analyzing gapless playback information. To determine which file may be causing the issue, follow the steps below:
    Quit iTunes.
    Navigate to the iTunes folder:
    Windows 7 and Windows 8:c:\users\username\My Music\iTunes
    Move the iTunes Library.itl file to your desktop.
    Open iTunes. You shouldn't see any content in iTunes.
    Choose File > Add Folder to Library.
    Navigate to the folder where your music is located:
    Windows 7 and Windows 8:c:\users\username\My Music\iTunes\iTunes Media
    Choose an artist, album, or song to add to the library.
    Wait for iTunes to successfully add the item to your library and perform the gapless playback scan.
    If successful, continue adding songs to your library.
    If there is an issue with one of your files, you'll notice your issue reappear after you add it to the library. You should repeat these steps, being careful not to add the files that caused the issue.
    System-wide troubleshooting
    When troubleshooting system-wide issues with iTunes, try these steps:
    Check for viruses. Windows viruses can interfere with a variety of computer functions, including iTunes.
    Make sure that you have current anti-virus software installed with up-to-date virus definitions.
    Scan your system.
    Check for anti-virus and Internet security software. Internet security software may cause iTunes to quit unexpectedly. Try disabling the Internet security software temporarily or exempting iTunes from any active scanning done by the software. If this resolves the issue, check with the maker of the software for an update to the software or its virus definitions. Learn more about fixing security software issues.
    Check for conflicting processes. Sometimes other programs and startup items can conflict with iTunes. Learn how to troubleshoot conflicts using Msconfig in Windows Vista, Windows 7, and Windows 8.
    Remove iTunes configuration files. Removing unusable configuration files from iTunes can resolve launch issues.
    Check the iTunes installations. An improper installation of iTunes can contribute to a variety of issues. Follow these steps to completely reinstall iTunes.
    Update the drivers on your PC. Outdated drivers on your computer can cause strange behavior with iTunes, iPod devices, and other apps. Learn how to update the drivers on your computer.
    Last Modified: Jan 15, 2015
    Hope this helps ...
    - Judy

  • [SOLVED] Google Earth doesn't work with xf86-video-ati

    Hi all,
    I'm having a problem with the open-source ATI drivers.  I haven't had much luck finding out anything from anywhere else, so I'm hoping someone here can help.
    Whenever I start Google Earth, the graphics run EXTREMELY slowly, almost as if it's running on a system with low memory.  I'm running an Acer Extensa 4420 with an AMD Athlon 64 X2 dual-core 64-bit processor with 2GB of RAM.  As mentioned before, I'm running on the open-source xf86-video-ati drivers, but this is the only app that gives me problems.  GL screensavers run fine, and glxgears runs without any significant input.  Running Google Earth in terminal also gives no output. 
    And I'm not sure if this is related, but closing Google Earth also crashes X.
    Here's xorg.conf:
    Section "Module"
    Load "extmod"
    Load "dbe"
    Load "record"
    #Free86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    # This loads the font modules
    # Load "type1"
    Load "freetype"
    # Load "xtt"
    # This loads the GLX module
    Load "glx"
    # This loads the DRI module
    Load "dri"
    Load "drm"
    Load "synaptics"
    EndSection
    # Files section. This allows default font and rgb paths to be set
    Section "Files"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    # FontPath "/usr/lib/X11/fonts/local/"
    # FontPath "/usr/lib/X11/fonts/misc/"
    # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    # FontPath "/usr/lib/X11/fonts/75dpi/"
    # FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    # Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.
    # Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    Option "DontZap" "no"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    # Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    # Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    # Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    # Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    # Option "AllowNonLocalModInDev"
    Option "AutoAddDevices" "False"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Option "XkbRules" "xorg"
    Option "XkbModel" "acer_laptop"
    Option "XkbLayout" "us,de"
    Option "XkbOptions" "grp:lwin_switch,grp_led:num,eurosign:e"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "Auto" # Auto detect
    Option "Device" "/dev/input/mice"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    EndSection
    Section "InputDevice"
    Identifier "Touchpad"
    Driver "synaptics"
    Option "AlwaysCore" "true" # send events to CorePointer
    #Option "Device" "/dev/input/mice"
    Option "Device" "/dev/psaux"
    Option "Protocol" "auto-dev"
    Option "SHMConfig" "false" # configurable at runtime? security risk
    Option "LeftEdge" "1700" # x coord left
    Option "RightEdge" "5300" # x coord right
    Option "TopEdge" "1700" # y coord top
    Option "BottomEdge" "4200" # y coord bottom
    Option "FingerLow" "25" # pressure below this level triggers release
    Option "FingerHigh" "30" # pressure above this level triggers touch
    Option "MaxTapTime" "180" # max time in ms for detecting tap
    Option "VertEdgeScroll" "true" # enable vertical scroll zone
    Option "HorizEdgeScroll" "true" # enable horizontal scroll zone
    Option "CornerCoasting" "true" # enable continuous scroll with finger in corner
    Option "CoastingSpeed" "0.30" # corner coasting speed
    Option "VertScrollDelta" "100" # edge-to-edge scroll distance of the vertical scroll
    Option "HorizScrollDelta" "100" # edge-to-edge scroll distance of the horizontal scroll
    Option "MinSpeed" "0.10" # speed factor for low pointer movement
    Option "MaxSpeed" "0.60" # maximum speed factor for fast pointer movement
    Option "AccelFactor" "0.0020" # acceleration factor for normal pointer movements
    Option "VertTwoFingerScroll" "true" # vertical scroll anywhere with two fingers
    Option "HorizTwoFingerScroll" "true" # horizontal scroll anywhere with two fingers
    Option "TapButton1" "1"
    Option "TapButton2" "2"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
    Identifier "Acer Laptop"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync 31.5 - 57.0
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-90
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName "Unknown"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    EndSection
    # Device configured by xorgconfig:
    Section "Device"
    Identifier "ATI Radeon"
    Driver "radeon"
    #VideoRam 262144
    # Insert Clocks lines here if appropriate
    Option "AGPMode" "4"
    Option "ColorTiling" "on"
    Option "AccelMethod" "EXA"
    Option "EnablePageFlip" "on"
    Option "AGPFastWrite" "yes"
    Option "EXAVSync" "yes"
    Option "ForceTVOut" "true"
    Option "TVStandard" "ntsc"
    EndSection
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "ATI Radeon"
    Monitor "Acer Laptop"
    DefaultDepth 24
    Subsection "Display"
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1200x800"
    ViewPort 0 0
    EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Touchpad" "SendCoreEvents"
    InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    Here's my drirc:
    <driconf>
    <device screen="0" driver="r300">
    <application name="Default">
    <option name="force_s3tc_enable" value="false" />
    <option name="texture_coord_units" value="8" />
    <option name="fthrottle_mode" value="2" />
    <option name="disable_stencil_two_side" value="false" />
    <option name="tcl_mode" value="3" />
    <option name="texture_depth" value="0" />
    <option name="fp_optimization" value="0" />
    <option name="def_max_anisotropy" value="1.0" />
    <option name="no_rast" value="false" />
    <option name="command_buffer_size" value="8" />
    <option name="round_mode" value="0" />
    <option name="dither_mode" value="0" />
    <option name="disable_lowimpact_fallback" value="true" />
    <option name="texture_image_units" value="8" />
    <option name="disable_s3tc" value="false" />
    <option name="color_reduction" value="1" />
    <option name="vblank_mode" value="1" />
    </application>
    <application name="Google Earth" executable="googleearth">
    </application>
    </device>
    </driconf>
    Last edited by coolpyrofreak (2009-07-03 05:56:18)

    I had the same problem (slow googleearth) with ATI Technologies Inc Radeon Mobility U1 (IGP 320m).
    This .drirc solves it. I don't have an xorg.conf.
    - no need for the 'disable_lowimpact_fallback' option
    - no need to turn off 'atmosphere'
    cat .drirc
    <driconf>
    <device screen="0" driver="radeon">
    <application name="Default">
    <option name="force_s3tc_enable" value="false" />
    <option name="no_rast" value="false" />
    <option name="fthrottle_mode" value="2" />
    <option name="tcl_mode" value="3" />
    <option name="texture_depth" value="0" />
    <option name="def_max_anisotropy" value="1.0" />
    <option name="no_neg_lod_bias" value="false" />
    <option name="texture_units" value="3" />
    <option name="dither_mode" value="0" />
    <option name="hyperz" value="true" />
    <option name="round_mode" value="0" />
    <option name="color_reduction" value="1" />
    <option name="vblank_mode" value="0" />
    <option name="allow_large_textures" value="1" />
    </application>
    </device>
    </driconf>

Maybe you are looking for

  • Sales Order Unable to Use New Condition Tables for Tax Condition Type

    Dear All, I am currently working on SAP R/3 4.0. I have a new requirement for my tax where I need to create new condition tables other than the 4 standard SAP tables which are Customer/Material, Division/Customer, Departure Country/Destination Countr

  • How to print a company logo on top right corner in pdf

    Hello together, how can I print a company logo in a PDF-Document (Print Version; 0Analysis_Pattern_Export) on the top right corner. I created a own web template which just contains the company logo and included this template in the ZAnalysis_Pattern_

  • Alternative payer/ bill toparty

    Hi gurus, can u tell me how many payers we can define for a customer.My client has requirement that they want four payers. So that if the primary payer does not pay then they can bill the seconday payer & so on But I am not sure how to configure it.

  • Receiving 8 1/2 X11 scans as 17" X 22"

    A colleague of mine uses a Lexmark Pinnacle Pro 901 scanner. She emails me a large number of scans as PDFs that open in Adobe X as long, skinny documents that display as opened at 34% original size in order to accomodate the size. A check of document

  • Secure Backup vaulting/autorunmmjobs not work

    Dear guys, I already set vaulting/autorunmmjobs to YES but when i do the backup, the backup job still require manual start job by command runjob. It seem the vaulting/autorunmmjobs not overide the defaults setting. ob> lsp vaulting autorunmmjobs