Unusual entries in table V_T333, unknown warehouse number

Hello all,
After putting enhancement pack 3 on our systems, we discovered that it added a warehouse number MLO.
We cannot figure out why this was added, or what purpose it serves.
Any suggestions?

Hi,
I've seen the same. There are no notes mentioning this.
Regards,
MdZ

Similar Messages

In GR, T331 entry for warehouse number GVW and storage type 916 not found

Hi friends,
while doing gr, it is giving following error. we are having wm
T331 entry for warehouse number GVW and storage type 916 not found
regards,
william

Hai,
Add the entry 0f 916 storage type to ur warehouse by copying from std i.e 001 in SPRO/Log Exe/WM/Master data/Define str type.
Regards,
BSK

Copy a Warehouse number

Hi,
in SAP there is a standard Warehouse Number 001 Central Warehouse full, if I want to create a new one
as copy of the above it is correct to copy al the entries related to 001 warehouse number ?
My purpose is to avoid that some mvts won't work. I don't know if that is a good idea or not.
Best regards

Hi,
It is always good to copy warehouse Number 001. The storage type search table for warehouse 001 also gets copied directly to the new warehouse. You need to change the search startegy to meet your requirements.
Regards,
Ramakrishna

Table to find serial number for the stock of a material

Dear All,
I have a requirement in which i want to find the serial number for the stock of a material.
in Equi i have serial number with material.
But i want it with plant also.
pl. suggest me in which table u have serial number,material , plant and storage location.
Regards & thanks,
Vidhya

Thanks kesav.
I checked EQSE table in that no entries are found.
In EQBS table for that equnr u have plant and storage location.
but the performace while selecting EQUI on the whole will be very slow.
so i want a table with material,serial number,plant and storage location.
kindly suggest.

How to select data from a table by passing document number from another tab

How to select data from a table by passing document number from another table.
for eg:-
I want to display name, adres, region from ADRC table
by using field delivery document number
Kind Regards,
Shanbagavalli.S

Hi Shanbagavalli,
There are multiple solutions to this questions a few i will try to answer and then you can take the best required for your requirements.
**Consider that you have a Internal table having document number from other table..
SELECT NAME ADRES REGION FROM ADRC
       INTO IT_ADRC
       FOR ALL ENTRIES IN IT_DOC
       WHERE DOCUMENT_NO = IT_DOC-DOCUMENT_NO.
**Consider that you have 1 document number then
SELECT NAME ADRES REGION FROM ADRC
     INTO IT_ADRC
     WHERE DOCUMENT_NO = W_DOCUMENT_NO.
Hope this solves your problem.
Regards,
Kunjal

Corresponding entry in table SRRELROLES for Idoc

Hi,
Can anybody please help me how to find the corresponding table entry in table SRRELROLES if I know the Idoc number created in inbound process in SAP R/3 system?
What should be the OBJKEY for the Idoc no?
Thanks & regards,
Yogita

Hi Yogita,
Check these posts, Which has been answered.
Re: Purchase order IDOC relationship
Re: Need help in Conversion
Regards,
Satish

No entry in table T71ADM10 for key 'X'

Hello,
While uploading data from R/3, I get this error message:
'No entry in table T71ADM10 for key "X"'
But when I look in the R/3 table T71ADM10, then I am able to find entries for the key 'X'.
Additionaly in the BI DataSource Monitor, if I click the 'Maintain PSA' button, all records are shown as updated successfully. No erronous records are returned.
Under the 'Details' tab, 'Extraction' shows error; but 'Transfer' and 'Processing' Steps are shown successful.
Please advice.
Thanks & Regards,
Labanya.

Hello Labanya,
As you telling data is available in PSA . So there is need to do update from fro PSA. So Just select that request number goto RSA1--> PSA. Then find your Request number. Check whether it has with red mark. Then right click on mouse and select "start the update immediately". And check whether you are getting same error or not.
Thanks,
Abha

No entry in table T527X for E

Hi,
The HR IDOCs are ending in error in our production system with the error:
No entry in table T527X for E
Message no. RP301
Diagnosis
The entry values must be stored in table T527X. The " E" value(s) are not in this table.
When the IDOC is reprocessed manually or by the standard program, the IDOC has OK status.
The error just started from today and we do not know as to what is causing this error.
I have checked in the FM that is processing the IDOC and I could not find nay reference to the table T527X or that message number.
Can anyone please help?
Regards,
Archana

The IDOC is being processed by a custom Function module but this program was modified
and the changes were moved to the system last week.
If IDOC was getting processes Successfully till last week, Customization done recently is the Culprit
I am thinking about the complexity of the Standard Function (which almost processes all
types of HR master data and how developer must have managed to write Custom code for all of this.
Quite Complex I think.
The main change was that in some updation BDC is now used to update the screens
directly and then PA41 tcode is being called. Do you think this might cause the issue?
But then it works in reprocessing - strange.
In some places, the standard function module is used (code not changed for this) -HR_MASTER_MAINTAIN -
(i think).
Well what all I can say is track the error message while running the IDOC for first time and
that will only give you the solution.
Regards
Shital

How to maintain the entries using table maintanance??

Hi,
I have created a Ztable. and I have created table maintanance generator, then attached the table to a
Tcode. but I am unable to maintain the entries in table maintanance??
Can anyone help me out
Regards
Devi

Hi this will help u.
Hi,
Go to SE11 enter table name ->change
Utilities-> Table Maintenance Generator
delete the Table maintenance by pressing delete button on menu,
then start creating it again.
Enter Auth.Group as &NC&
Enter function group < some name>
Maintenance Type -> One step
Overview screen -> some Number (1 or 2)
Press create
enter dev class and save, activate.
Go to SM 30 and check again.
Reward if useful
Regards,
Hema Sundara.

No entry in table $ for key $ at $ T555A 110600

Hello Experts,
When I run the time evaluation through T-Code PT60, I am getting the following error:
No entry in table $ for key $ at $ T555A 110600 01.01.2009
Technical error no. 72
01.01.2009 Processing terminated for EE 90000022.
Kindly let me know how to resolve this?
Thanks & Regards,
Preshit.

Hello
This error usually occurs as the program is looking for an entry in table T555A for PSg 'XX' and time type 'XXXX' and does not see an entry.Consequently, an error is produced.
PSg 'XX' (MOBDE) is due to your configuration for this employee, as found in T001P using personnel area and subarea. Please make sure you have the entries it is looking for defined.
Would you also please check all infotypes of this personnel number regarding their validity, especially quotas. In similar cases this error message occurred, if the IT0007 started before hire date of the employee.
Thanks and Kind Regards
Ramana

Finding warehouse number with storage location

Hi all,
How can I find the warehouse number given the material, plant and the storage location? Thanks in advance.

You need to join two tables :
MARD - MATNR,LGORT,WERKS
MLGN - Here you get Ware house number
Check with LS24,LS26 Transaction and also check with MLGT Table
Thanks
Seshu

No entry in table $ for key $ 554C 400100 20090

Hi Gurus,
While running payroll--for some employees(pre . number 125) the following error is coming:
No entry in table $ for key $ 554C 400100 20090
Technical error no. 72
02.01.2009 Processing terminated for EE 00000125
This error is coming while I am applying Leave Without Pay (LWP).
If I delete the applied "Leave Without Pay " there is no error with the payroll run . It's working fine .
I want to see the effect what happened if I apply LWP whether Basic Pay is reducing or not .
Please help.
Thanks
Pramod S

No entry in table $ for key $ 554C 400100 20090
Check the Groupings for this employee in V_503_ALL
u have not assigned the Valuation rule
no if u are not applying to LWP the Basic pay will not get Reduced
Assign ur Absece Valuation to ur Absence type
Groupng problme kindly check
Edited by: Sikindar on Jun 17, 2009 1:02 PM

No Entry in table for Key at T511K 40 GTMAX

Hi,
Iam doing Time evaluation with clock times...
While running RPTIME00 I am getting this error
" No Entry in table for key at t511k 40GT MAX "
What to do?kindly help
hr_user

Hi,
I guess you are configuring for Indian Payroll.The error says that in the table T511K,and for country grouping 40,the constant is GTMAX is missing.Please check the rule where the Timeevaluation is giving the error and look for the operation and this constant GTMAX find out for what the rule is looking for and based on that ,you need to create that constant.
I guess this is not GTMAX,but that is TGMAX which is for daily maximum hours and which will be checked by the rule TO21 in the schema TM00.
So what you need to do to solve this problem is.
1.Go to the table V_T511K with Tcode SM30.
2.Type in the country grouping 40
3.Then Create a constant TGMAX with the number hour maximum hour allowed in you company .
Hope it solves your problem.
Good Luck!

No entry in table T030 for argument Fld: KONTS

Hi experts,
I'm getting this error message "No entry in table T030 for argument Fld: KONTS" when I try to save travel request from travel manager (TRIP).
do you know how to solve it?
because, I did googling on tabel T030 and it is table for warehouse management not travel.
T030 = WM Storage Bin Types tables
how to solve this?
thanks.

Hi ,
This looks like a config issue. Make the config changes in the table T030 via the below path.
SPRO --> Financial Accounting --> Travel Management --> Travel Expenses --> Transfer to Accounting --> Conversion of Symbolic account to Expense Account.
Check the below threads for more info.
No entry in table T030 for arguement HRT 1X2 and 1X3
Hope this helps..
Regards,
Praisty

Entry in table TAX with authority CA --- is missing.

Hi
I change dthe residence state record effective june of last year and when the payroll runs , it throws the error
Entry in table TAX with authority CA XXXX is missing.
Has anybody come across this kind of error before.
Thanks
Revti

Can you tell me the error number of it. Also make sure that required config for the US tax for both the state authority are configured correctly.

Unusual entries in table V_T333, unknown warehouse number

Similar Messages

Maybe you are looking for