Unusual issue with tag engine and BELKIN USB to Ethernet adapter??

I have an .scf file with 72 tags and several tag groups in it. If I open the tag engine without the usb adapter, I can read the tag group names with the get group list.vi. The tag group names are listed in black letters when wired to an indicator. When I plug in the usb ethernet adapter, immediately the group tag names are greyed out in the indicator without even running the vi. If I put a tag constant on the block diagram and try to select a tag name with the pointer, no tagnames pop up. It worked yesterday and my IT. department sent down a shockwave and flash5 update download when I booted up this morning. anyone have any ideas??

I am still seeing the tag groups disappear when I start the tag engine on labview7.0. I have several other programs running at the same time, KEPWARE, PROWORX NXT, USB to ethernet adapter. This is on a win2000 machine.
Attachments:
op50_head_press_force_status_rev2.vi ‏320 KB
Process_Sta2_probe_results.vi ‏42 KB
op50_head_version2.scf ‏53 KB

Similar Messages

HP Laserjet 4100 and Belkin USB Parallel Printer Adapter

I'm a brand new Mac user. I wanted to connect my Mac to my existing HP Laserjet 4100 printer. To do that, I had to purchase a Belkin USB Parallel Printer Adapter. I saw that Mac wasn't supported by this adapter, so I called Belkin and they said it was supported. Tried to set it up and failed. Called Apple for help, was on the phone for quite a long time, and no luck. Went to HP site to load drivers, and no luck. I contacted HP online and was told this product is no longer supported.
So right now when I try to print, I get a message that says the printer is offline...but it's not. Anyone have any ideas for a workaround?
Thanks so much for any thoughts.

I think you should be a little more patient in trying to find a solution. I have an HP Laserjet 4ML from 1992 that I still use every day.
In my case, I purchased an HP Jetdirect external parallel print server and have the printer connected to my router that way.
You may also want to power off the printer, reset Printing System, and then power on the printer and re-Add it in Print & Fax.
http://support.apple.com/kb/HT1341

Continuing font encoding and tag issues with snow leopard and CS4oI

I am looking for help with a font handling issue with snow leopard and cs4 Indesign. Despite numerous calls and hours on the phone neither Apple nor Adobe has been helpful. I have had this issue open with Adobe since oct 5 but they remain totally unresponsive to date. I need to be able to use Type 1 fonts and do the following , export a pdf from Indesign with the following attributes: 1) xml tags for stories and objects. 2) have the fonts encoded as ansi and embedded.
Some additional information - exporting to ps is not an option as it destroys the xml tags. and doesn't guarantee that the fonts won't become CID or some other odd encoding.
As it stands now,
Leopard (10.5.8) and CS3 creates ansi encoded fonts with xml tags.
Leopard (10.5.8) and CS4 creates ansi encoded fonts with xml tags.
Snow leopard and CS3 creates ansi encoded fonts and xml tags
Snow leopard and CS4 creates custom subsetted fonts and some xml tags.
If any one has any advice on how to force specific font encodings from CS4 pdf exports so that i can preserve the tags and get the correct fonts I would be grateful.

The font encoding is not a function of the OS version, but rather of how a font is internally encoded and the content you are representing with the font.
If you are seeing a difference between MacOS 10.5 and 10.6 with the same Adobe software, it probably has something to do with use of a system font that is somehow different from one version of the OS to another. InDesign does not use any of the OS' font handling software.
Assuming that the fonts are embedded, subset or not, what is your issue with whether a font is ANSI-encoded, custom-encoded, or CID-encoded? It should make no difference for purposes of workflow beyond InDesign for software that adheres to the PDF specification (including all versions of PDF from 1.3 and up to 1.7 plus ISO 32000-1 PDF and all versions of PDF/X and PDF/A).
Neither InDesign or any other Adobe application provides user choices for the encoding since it shouldn't make a difference. The encodings chosen by Adobe's core technology components are for a combination of optimization and to support proper text search, copy, etc.
- Dov

Issues with J2EE engine memory settings.

Hi SDN!
I've got Web AS server 7.0 (Java only) on laptop for development use. Laptop has 2 GB RAM and 1,83GHz Core 2 Duo CPU
I have several issues with Java Engine.
1)J2ee instance Settings.
For Instance:
- "Message server & bootstrap" node
     - max heap size: 256
- "Servers general" node
     - max heap: 1024
     -Xmx1024m
     -Xms1024m
     -XX:PermSize=256m
     -XX:MaxPermSize=256m
For Dispatcher:
- "General" node:
     - max heap size: 170
     -Xms170m
     -XX:NewSize=57m
     -XX:MaxNewSize=57m
- "Bootstrap" node:
     - max heap: 256
For Server:
- "General" node:
     - max heap size: 1024
     -XX:MaxPermSize=256M
     -XX:PermSize=256M
     -Xmx1024m
     -Xms1024m
     -XX:NewSize=171M
     -XX:MaxNewSize=171M
- "Bootstrap" node:
     - max heap size: 256
When I turn debug mode on for server via config tool, I've got 503 error and message "SAP WebAS Engine is starting... Message: Dispatcher running but no
server connected!" but in SAP mmc server instance looked like started (green color).
Windows Taskmanager shows me that 2GB total memory and near 600 MB of memory free.
Also I'm confusing about these nodes ("general", "bootstrap") with similar parameters and don't know which parameters I should set up according to note
723909.
2) I need to modify Java applications, build, deploy to local server and debug it there. Also may be ABAP debug will be used. Please give me information
about optimised engine (and, if needed, NWDS) settings for these tasks.
Help will be appreciated.
Regards, Lev

In general terms, the bootstrap process is what is used as java is starting up and pulling objects into memory. The heap used for the bootstrap process (I believe) is returned to the system after startup.
The server process is where the Java application server applications are so it will require the most heap.
Does that help?

Driver issues with HP Z440 and SCCM 2012 R2?

Greetings, we received our first charges of Z440 workstations last week. We immediately downloaded the HP Z440 driverpack from http://ftp.hp.com/pub/caps-softpaq/cmit/HP_Driverpack_Matrix_x64.html and imported those into our System Center Configuration Manager 2012 R2. Of course we did use the Win 8.1 drivers to inject into our boot image and wie normally imported the Windows 7 drivers for the Windows 7 deployment.Well, unfortunately SCCM WinPE5 does not show any drives installed, even with the correct drivers installed. We even tried to import the WinPE 5 driver pack and the drivers from SoftPaq download manager, but none of those seemed to work. Is there any known issues with Z440s drivers and SCCM? Please help me out on this, it's pretty urgent. Thank you & kind regards

The problem cannot be replicated. My Z440 has an 1TB WD SATA drive attached to port 0 of sSATA 6 Gb/s. Download and install the ´Windows Assessment and Deployment Kit (Windows ADK) for Windows 8.1 Update´: https://www.microsoft.com/en-US/download/details.aspx?id=39982 Download and extract the ´Intel Rapid Storage Technology Enterprise Utility and Driver for Microsoft Windows (64-bit Editions)´, 4.1.0.1046 B(12 Nov 2014), sp69762.exe:http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6978829&swItemId=wk_139802_1&swEnvOid=4059 Copy the IRST driver “64bit_RSTe_4.1.0.1046_F6_Drivers” abd sub folders into “C:\z440_x64\64bit_RSTe_4.1.0.1046_F6_Drivers” Open the ´Deployment and Imaging Tools Environment´ command window as administrator and create bootable USB media:copype amd64 c:\winpe_x64 Dism /Mount-image /ImageFile:c:\winpe_x64\media\sources\boot.wim /index:1 /MountDir:c:\winpe_x64\mountDism /Add-Driver /image:C:\winpe_x64\mount /driver:C:\z440_x64 /recurseDism /Get-Drivers /image:C:\winpe_x64\mountdism /unmount-wim /Mountdir:c:\winpe_x64\mount /commitMakeWinPEMedia /UFD c:\winpe_x64 d: Boot Z440 to F10 Setup.Set Factory Defaults and exit.Boot to WinPE media created above.I also tested the wim file as the boot image in SCCM 2012. The hard drive is detected correctly.

Issue with Anonymous Authentication and updating or starting new projects

So 2 weeks ago I had a post about Anonymous Authentication found here:
https://social.technet.microsoft.com/Forums/office/en-US/9b0e6eec-190a-4b48-a280-6adef441659a/issue-with-anonymous-authentication-and-people-picker-and-reports?forum=sharepointgeneral&prof=required
That issue has been resolved but has created a new issue. We have Anonymous Authentication disabled but when one of our users tries to make a new project she gets the following:
Unexpected response from server. The status code of response is '0'. The status text of response is ''.
When she tries to edit an existing project, she gets the following:
The server was unable to save the form at this time. Please try again.
If I re-enable the Anonymous Auth. everything works for her again, but then we face the issue from the original post with reports not publishing.
Any ideas on how to make everything get along?

#apDiv2 {
    position: absolute;
    width: 698px;
    height: 299px;
    z-index: 1;
    left:50px;
    top: 117px;
    overflow: scroll;
Don't forget to fix your code errors. You're still missing a <body> tag in your markup.
Nancy O.

Issues with Exchange Account and Q10

Well, I hate to be writing this, but I'm hoping that there might be someone out there that can help get past some first day issues I am experiencing.
The background: I have a long history with legacy BlackBerry devices, and almost as much history with iOS devices. My most recent phone was an iPhone 4S, and I make extensive use of iCloud to keep my iMacs, iPhone, and iPad connected in real-time. The setup worked. It wasn't perfect, but it worked. However, because I used to have a BlackBerry device (most recent the 9930) and because I don't use the iPhone for more than e-mail, iMessage, and phone calls (generally speaking), I decided to give the newest BlackBerry device a shot. So I bought a Q10.
At this point I feel compelled to say that the hardware is everything I had hoped it to be. It's solid, has a good weight, and appears to be made very well. I have no complaints with the hardware, including the keyboard (a big selling factor for me), so I won't really get into the hardware as the issues I am experiencing all have to do with the OS. Let me also say that I am very familiar with the iCloud integration issues (missing Contact photos and disabled Calendar sync), so I'm not voicing a complaint over those issues in this thread.
I have connected my Exchange account. I used to have everything in Exchange before I moved my entire computing world over to Apple, and now I keep Exchange around for e-mail. Therefore, I have no contacts, no tasks, no notes, very limited calendar entries, and a massive amount of e-mail on the Exchange server. However, to test everything out, I have added a single contact record so I can see it show up on the phone and be able to test two-way sync between the Q10 and Exchange. And here is where the first issues crop up. It looks like Exchange connects and then disconnects at random. For example, if I open my Contacts on the phone, I see the one contact (called John Doe). Then, as the phone is sitting there with the screen on, the contact will disappear and I will see a "Start adding contact to your contact list" notice on the screen. Then, after a short period of time, the single contact will return. It is important to note that the entire time this is happening, the All Contacts option is selected in the list so that all available contacts are shown. Additionally, I have SIM card contacts turned off, but if I alter the selection in the view list (All Contacts, Favorites, etc.), the SIM contacts will re-appear when I return to the All Contacts view. At the same time, even though I have turned off SIM Contacts in the settings, the setting has reverted to show SIM Contacts. If I turn off the setting again, SIM Contacts still show up. Possibly related: I can't delete contacts on the SIM card, no matter how many times I try, and it now it seems that I can't get SIM Contacts to go away in the Contacts app.
Likewise, Exchange seems to connect and disconnect from Calendar. I go to the calendar and move day by day to June 15th. I see an entry that I know is from Exchange (I have no other connected calendars at this time), and it is in blue. I change the calendar color to green and the entry changes color, as expected. However, if I jump back to today and then scroll day by day to get to June 15th again, the calendar entry is missing. After a few seconds, the entry re-appears, but it is, once again, in blue. The setting has reverted itself, and it seems like Exchange is completely disconnecting and automatically reconnecting to the phone like I am setting it up again for the first time. Very odd. As I'm typing this, I just saw something odd. I swiped to wake up the phone, and the active frames screen was the visible screen. The calendar app is still running (since I left it running, minimized, when the phone went to sleep) and the date shown in the active card was Jan 1, not Jun 8. Why? The date (and time) on the phone is correct and is set automatically by the cellular system.
Nevertheless, looking at BlackBerry Hub, I see only two e-mails in my Inbox from Exchange, even though I have roughly a dozen in my Inbox. The rest are filed in sub-folders. And bam! Just like that... I get the "Add Accounts" screen while looking at the Hub. In other words, as I was typing this, I first saw two Exchange e-mails and then, out of nowhere, the e-mails disappear and I see the "Add Accounts" screen as if no account has been connected.
So... first question: Is anyone else experiencing this issue? This is very strange, and very frustrating. Second: could this be related to the large amount of e-mails I have stored on Exchange, some of which have large attachments? I selected "Forever" as the sync history length. I have my concerns, however, if this is related to loading historical e-mails onto the phone (in other words, the first sync with Exchange) because there is no reason that I can understand that the phone would blank out as if no account was connected at all. I can understand lag and stuttering while the history is syncing, but not a complete disconnect and reconnect. Considering all of the issues with the one and only contact record disappearing, the calendar entry for Jun 15th disappearing and then reappearing with the wrong calendar color, and e-mail in my Inbox incomplete (two of a dozen e-mails) and ultimately disappearing, I feel like this OS just has some real, significant issues.
Full disclosure: I do want iCloud to work and am a fan of Apple products, but the lack of full iCloud sync support is not a big enough issue for me to want to send back this phone and/or see it fail so miserably. I will happily move my info from iCloud into Exchange, Google, and/or set up a new Exchange account for personal use (Office 365) because I am not wedded to iCloud per se. But, I won't go through that trouble if I can't even get my first account to work properly. It should also be noted that I do have a basic Google account (non-paid) and I had previously attempted to connect to it. However, I was experiencing the exact same issues with contacts disappearing, e-mail disappearing, etc. So I deleted that account. Truth be told, I deleted the Exchange account as well, and then re-connected to Exchange only to test one account at a time. Unfortunately, even with Exchange only, I am seeing very strange and frustrating behavior as described above.
Help... please. I want this to work but the frustration I am feeling is growing worse by the hour.
Model: SQN100-2
OS Release: 10.1.0.2011
OS Version: 10.1.0.2038
Build ID: 525050
Ian

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS.

I am having major issues with Logic 8 and want to reinstall.

I am having a lot of issues with Logic 8 and want to do a re-install. What is the procedure and what do I need to uninstall first. I need to be careful, because I don't want to affect my Logic 7.
Any suggestions?

What problems?
The first thing to do is trash the preferences. As far as affecting Logic 7, once you install 8, 7 is "forgotten" about. I'm assuming your L8 is a real version, not a "borrowed from the interweb" one.

My itunes account shuts down for no reason. It wont recognize my iphone and there is an issue with network connectivity and itunes. I have already reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done. Ideas??

My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??

Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

HT4527 Is there an issue with home sharing and windows 8?

Is there an issue with home sharing and windows 8? I've tried everything and cant get mine to work.

Here is the entire error listing after it states the installation encountered errors.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 2 error(s), 13 warning(s)
WARNING: DW066: OS requirements not met for {0D96CFE6-376D-44B8-808A-16F3BEB73263}
WARNING: DW066: OS requirements not met for {601CB5BC-03F9-43CC-86F0-C75E65E6AF31}
WARNING: DW066: OS requirements not met for {56AE7FCC-81B2-4A63-A171-CD95C9295EF2}
WARNING: DW066: OS requirements not met for {4717AE70-5377-45C7-A9E9-4E400485F0BF}
WARNING: DW066: OS requirements not met for {8B59B329-26C1-48A4-A5AA-923F55B17B87}
WARNING: DW066: OS requirements not met for {948B7277-3D4C-4672-B1DB-24B3C83D704E}
WARNING: DW066: OS requirements not met for {25303D67-B573-460C-A0B6-B5CF2AE05045}
WARNING: DW066: OS requirements not met for {33E08F4F-42B7-42A9-89E4-443E02738DB0}
WARNING: DW066: OS requirements not met for {D5B1535A-FDFC-4B40-B2E2-21DA83D9CB57}
WARNING: DW066: OS requirements not met for {AD60EB24-4CEE-4CA0-A6AA-526EAF41F2DB}
WARNING: DW066: OS requirements not met for {F9FAC696-2E48-497D-B820-C9A65DA630DF}
WARNING: DW066: OS requirements not met for {7DE6CDC3-CFEE-4564-813D-3F59E5D71F10}
WARNING: DW066: OS requirements not met for {C92E440F-EE79-4A28-B1E1-EC82B6F2AF33}
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

Issue with Information broadcasting and pre-cal server in SAP BI

Hi Experts,
I have issue with information Broadcasting and Pre-cal server. I have a worrkbook whcih runs from information broadcasting in pre-cal server. Workbook is desinged on single query and workbook contains visual basic code. workbook has a variable which is controlled by Control query in information broadcasting.
I have 20 employees every month I need to send workbook via e-mail from information broadcasting. The problem is sometimes all 20 employees will recieve e-mails and sometimes not. I identified there is something wrong in workbook or in pre-cal server.
because after workbook calculation in pre-cal server is not pushing to SOST so there is something wrong in workbook or in pre-cal server.
I closely observed pre-cal server front end log. There are few operations performing on workbook in pre-cal server
like Open workbook, Calculate workbook, Save woorkbook and close workbook. In success case pre-cal sever is performing all the operations but in failure case pre-cal server is missing Close workbook case.
Below log In pulled from pre-cal server
Can you please tell what could be the problem.
Successful job
3/11/2011 9:29:46 AM (3) -> RS_PREC_LAUNCH_EXCEL i nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
2PCUG9ZPPP'. nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
3/11/2011 9:29:46 AM (3) -> InitConnection in thre ad 3
3/11/2011 9:29:46 AM (3) -> Trying to open "C:\Pro gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
xla" gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:30:35 AM (3) -> Using Version 7100.4.1 200.35 of BExAnalyzer.xla
3/11/2011 9:30:35 AM (3) -> PID of Excel process: "2504"
3/11/2011 9:30:35 AM (3) -> EndOfInitConnection in thread 3
3/11/2011 9:30:35 AM (3) -> RS_PREC_LAUNCH_EXCEL f inished
3/11/2011 9:30:36 AM (0) -> Calculation Request 91 1A35ED029D4D79DD7A000200000000 received for job 'B
IBCAST4L4EIS7TOR5BWG02PCUG9ZPPP'. 1A35ED029D4D79DD7A000200000000 received for job 'B
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:31:22 AM (0) -> Opening workbook: C:\W INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
DVLYAPC2SYIC7F1AAIO_0.xls INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
3/11/2011 9:31:43 AM (0) -> Refresh BExAnalyzer.xl a!MenuRefreshPrecalc returned with 1.
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls saved. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls closed. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:44 AM (0) -> Excel based operations finished.
Failure job
3/10/2011 10:22:58 AM (1) -> RS_PREC_LAUNCH_EXCEL invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
TGJR0462ZFX'. invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
3/10/2011 10:22:58 AM (1) -> InitConnection in thr ead 1
3/10/2011 10:22:58 AM (1) -> Trying to open "C:\Pr ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
.xla" ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:23:44 AM (1) -> Using Version 7100.4. 1200.35 of BExAnalyzer.xla
3/10/2011 10:23:44 AM (1) -> PID of Excel process: "2544"
3/10/2011 10:23:44 AM (1) -> EndOfInitConnection i n thread 1
3/10/2011 10:23:44 AM (1) -> RS_PREC_LAUNCH_EXCEL finished
3/10/2011 10:23:44 AM (5) -> Calculation Request 9 11A35ED02654D789871000900000000 received for job '
BIBCAST4L41566ZBZDN2NTGJR0462ZFX'. 11A35ED02654D789871000900000000 received for job '
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:24:31 AM (5) -> Opening workbook: C:\ WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
A8O8D8FBHYCR4HVB5UI8_0.xls WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
3/10/2011 10:24:52 AM (5) -> Refresh BExAnalyzer.x la!MenuRefreshPrecalc returned with 1.
3/10/2011 10:24:52 AM (5) -> Calculated workbook C :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
2VEA8O8D8FBHYCR4HVB5UI8_0.xls saved. :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
Thanks in advance
Narendra

Hi Ravikanth,
Thank you very much for the reply
I went into RSPRECADMIN and clicked on 'Display Current Queue'. There we have 3 sections
1) Queue Overview of Open Precalculations
I can see this section is always blank after running IB also
2) Queue Overview of Current Precalculations
In this section I can see an entry after running IB and duration is changing. but some time workbook in this section will never processed but the duration column is changing may be something is happening at this stage.
If the entry is not proccessed in this section and IB SM37 job will never end. I manually cancelled the job from SM50.
Don't why the workbook is taking long time and will never end even though I cancelled the SM37 IB job.
3) Queue Overview of Proccessed Error-Free Precalculations
All the error free workbooks which means all pre-cal server completed workbook calculation and sent to SOST.
I manually ran the workbook for all the 20 employees I can't find any pop-up message (earlier we have pop-up windows appearing because of VB code and when report returns no data and we fixed the pop-up issues)
Can you please help me further to trace the error.
Thank you
Narendra

Compatibilityy issue with windows XP and windows 8.1 for adobe photoshop elements 4.0

Compatibility issue with windows XP and windows 8.1 for adobe photoshop elements 4.0?comcom

You are going to have to contact Adobe on this one. We are other users.
Sounds like it's not even an Apple question? Not sure.
But the Adobe program changed, nothing changed in iTunes, right?

Issues with iCloud synchronisation and contacts over two or more devices. iTouch and iPad2 sync with different results from iMac. Thoughts?

Has any one experienced issues with iCloud synchronisation and contacts over two or more devices? The primary machine is an iMac running Lion. Address Book was created from vcf file (backup of address book prior to moving to iCloud). iTouch replicates Contacts just fine and matches the Address Book on the iMac. The iPad 2 does not showing only 123 contacts where there should be 200. I have turned off iCloud on both devices thus erasing the iCloud content of both devices and staring from scratch with both devices with identical results. Even turned off iCloud on the iMac and erased the Address Book and rebuilt with the same results. Anyone have any ideas or suggestions? I am going nuts.....

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

Issues with Office 2010 and Acrobat Pro 8

Good Day All;
We are in the middle of upgrading from Windows XP to Windows 7 with Office 2010 and I was wondering if there are any issues with importing Office documents into Acrobat Pro 8. I have found out that there are a couple of issue with Office 201 and LifeCycle Designer.
Any comments would be helpful
Regards
Chomp

Acrobat 8 is not compatible with Microsoft Office 2010 and the PDFMaker plugins will not install. Only Acrobat X is compatible with Office 2010, and at this time only in 32-bit mode.
Acrobat 8 is also not officially compatible with Windows 7, again Acrobat X is the first version to carry approval for that OS. It will still install, but Adobe cannot guarantee it will operate perfectly in all cases, and doesn't provide install support for that combination.

Unusual issue with tag engine and BELKIN USB to Ethernet adapter??

Similar Messages

Maybe you are looking for