Unusual message appearing on my screen
Hey, today i wtinessed a very strange message on my phone, my phone was locked and i got my phone out of my pocket and it had a message saying "i now have control of your phone. i can hear everything you say". once i unlocked the key pad it disappeared and i havnt seen it since.
it wasnt in a sms format, more of a screensaver, but my phone has not been jail broken and i do not have a screensaver on it. so it has baffled me.
has anybody else encountered this problem?
many thanks
Brett
Hi,
Lets break this down.. You are saying that you are getting a msg on your screen displaying this odd msg... It most likely a joke by a friend/family member. Has it only shown up once? Or is it when ever you screen goes into lock mode?
Check to see if there a wallpaper set with this msg as the actual picture. Change your wallpaper. Unless you phone is unlocked I don't know of a way for anyone to access your phone via through the air.
1)Change wallpaper then hit the sleep/wake button to see wallpaper
2)Turn off wifi when not in use. You only need to turn on when needed. Conserves battery also.
But if you are truly concerned just make sure you have the latest Itunes update ON your computer then connect your phone and do a Backup. Refer to article below on how to do this.
http://support.apple.com/kb/HT1414 Backup "Backing Up, updating, and restoring your iPhone and iPod touch software"
After you are sure you backed up and synced your contacts, music, applications etc, etc. Just do a complete restore of the phone. Good luck!
Similar Messages
-
Hello i have one problem with my ipod touch 4th gen....when i try to log in facetime one message appears in the screen whick saying you couldn't log into facetime.....what i suppose to do?? :/please help me :/
Try:
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems -
I can't upgrade and purchase on my ipad. when i am trying to buy the following message appears on the screen. "you have no account in canada store please change it the UK. how can I change it?
Try this.
Settings>iTunes and App Stores>Apple ID
Tap your ID
Tap View Apple ID
Enter your password
Go to country/region in the popup window to change the store -
Sent messages appear only on screen of other party
every Sent messages appear only on screen of other party and doesnot go into inbox. what may cause this?
Your phone is then sending what is knows as "flash messages"
What type of phone is it, you will need to change it back to sending normal text messages.
iPhone 5 32GB
MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4 -
TS3293 iPad not backed up message appears and touch screen does not respond
iPad not backed up message appears and touch screen does not respond
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot
-
When I try to connect a USB cable a message appears on the screen
When I try to connect a USB cable a message appears on the screen saying that one or more USB devices are consuming to much energy and due to this the USB port were deactivated.
What should I do to solve this problem?
Do not forget is only a merely USB cable from a texas calculator, I have experienced to with an USB extension, and the same problem appears, I have tried to connect directly a USB memory stick and the IMAC do not recognise is presence, or appears thesame mesage as with the cable.Updated information:
I have perfomed as rkaufmann87 instruct me but without any success.
Then I made some more tests:
I have tried to connect three diferent types (Ipad usb cable; TI-Nspire CX CAS usb cable and an ordinary extension usb cable) of usb connectors cables and all of them with the same behaviour.
Viewing the IMAC from backside and looking to the usb ports from the left to the rigth the behaviour of the USB ports are diferent.
the two first more to the left when we try to connect a USB cable, a message appears on the screen, sayng that USB devices are consuming to much energy and due to this the USB port were deactivated (This is more or less the translation from Portuguese language).
The ones more to the rigth nothing happens, simply are dead, no message and no charge the IPAD, no connect the USB stick.
I really need yuor support, this IMAC is from November 2012. -
How to fix my newly acquired ipod nano 6th gen? i cannot sync it because it always appear to my screen that it cannot be synced. the required folder cannot be found? how is it?
Is your iPod configured to sync photos? If so, try disabling the syncing of photos and see if the error message goes away.
Anything change with your iTunes library since the last time the Nano was able to successfully sync?
B-rock -
I am a novice user of an iPad3. My iPad is currently frozen. The only things appearing on the screen are two identical message boxes:
"iCloud Backup
This iPad hasn't been backed up in 2 weeks. Backups happen when this iPad is plugged in, locked, and connected to Wi-Fi."
Please help me figure out how to get this resolved, as the device is now totally immobilized.Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
When I connect my brand new ipod shuffle to the USB port I get an error message on the computer screen and the i-tunes software shuts down.
URGENT help please!!! I have looked everywhere on the internet and theres no information on anything
-
This problem only started when I upgraded to FF 4.0. I am running Windows 7. When I go to the task manager I am able to see the error message in the processes area, if I highlight it and tell the task manager to stop it, FF immediately starts and runs normally. I have no idea where the error message is coming from.
This problem only started when I upgraded to FF 4.0. I am running Windows 7. When I go to the task manager I am able to see the error message in the processes area, if I highlight it and tell the task manager to stop it, FF immediately starts and runs normally. I have no idea where the error message is coming from.
-
Any suggestions on how to permanently delete my phone number from the app? It's very hard to navigate, so good description please.
Mountain Lion sets your Apple ID for Messages app, so you can use iMessage and you can see your messages from other iPhones, iPads and iPods touch with your Apple ID.
To disable this, open the Messages app, go to Messages menu (on the menu bar) > Preferences > Accounts, choose iMessage in the sidebar and turn off this account -
INK Failure False message appearing on the screen
My Hp 1010 Printer INK Cartridge Failure.Cartridge model 61.
Hi Dilantha,
Here is the technical troubleshooting guide for cartridge problems: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03766922
All you have to do is select the computer operating system you have, and follow the steps.
If this does not help, then either the printer or the ink is defective, and you will have to contact HP technical support for further advice.
You can contact HP support in North America at 1-800-474-6836 or find the local telephone number for your country here: http://welcome.hp.com/country/w1/en/support.html Please look for the category "Technical Support After you Buy"
I hope that helps,
Best regards - Wally
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. *** -
I went to the website and could not find the update. How to do this?
I'm already running Foxfire Beta. The problem "went away" this morning when I restarted Foxfire. I got the Security Update bubble and and selected Update. The update downloaded and I restarted Foxfire to install it. All is ok.
-
Is there anything I can do
Contact iTunes and requirst a redownload
How to report/refund an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase -
Invoice Receipt Warning Message Appear After Upgrade from 4.6C to ECC6
Hi Gurus,
We do upgrade from 4.6C to ECC6. And we do Invoice Verification base on Delivery (Vendor delivery number), in our business process there more than one Purchase Order has same Vendor Delivery Number while GR executed. But only one Purchase order related to Invoice verification, others PO are Free PO (no need Invoice Verification).
The problem is:
In SAP 4.6C, while execute Invoice base on Delivery (Vendor delivery), system automatic select only PO with Delivery (vendor) which related/allow invoice receipt.
In SAP ECC6, while execute Invoice base on Delivery (vendor delivery), all PO selected. So than there are warning messages appear (warning pop screen) for those PO not allow invoice Receipt (message M8035: PO item XXXXX does not allow invoice receipt), and at the end PO which allow Invoice receipt then appear for further Invoice Receipt process.
At overall, the final result SAP 4.6C and SAP ECC6 is same (only PO which allowed Invoice Receipt will processed further).
The Question are:
1. Why in ECC6 appear warning message, while in 4.6C no warning message ? Is there config to ignoring the warning message. I've try to maintain system message for M8035 (t-code: OMRM) to ignoring the pop screen, but can not created.
2. How do we make warning message dissapear (no need warning message), because if the PO's has hundred items so user need to click enter hundred times.
Thanks in advance.
Regards,
Tri WicaksonoHi,
could you please check whether the flag "GR-based IV" is set in the purchase orders?
If GR based-IV is ticked, then this pop-up cannot be suppressed.
If you would like to post the invoice first then GR-based IV should not be checked, otherwise this pop-up will always appear. I am afraid that this behaviour is standard.
Please, be aware that this feature is only available if you set in the Purchase Order item the 'GR-based IV' indicator:
If the GR-IV flag is not set in the PO, then the system does not
differentiate individual goods receipts. Please see the <f1> help
for the field "GR-IV" in the PO item detail. Since the individual
receipts are not differentiated, an invoice is not tied per se to
an individual receipt and a goods receipt can be reversed despite
an invoice receipt.
With the GR-IV flag set on in a PO, you can specify which goods
receipt is being invoiced in an IR and which goods receipt is being
reversed in a return. It is this correlation between goods receipts
and invoices that enables you to specify for GR-IV PO's whether an
item can be returned despite an invoice.
Please refer to the note :457511 Question 10.
Best regards
Erika
Maybe you are looking for
-
Contract value exceeding in Release order
Hi All, The target value of the value contract is 200,000 INR. After reaching to the 190,000 INR ( Making different Release order ) the user has made one more purchase order for this value contract with the value 50,000. The system hasnt given any w
-
Data Transfer from Oracle database 10g to Oracle database 9i
Hi Experts, We need to insert records at the speed of min 10,000 records per sec in the following condition. Source : Oracle 10 g and Oracle 9i We need to select the data from Oracle 10g and insert into Oracle 9i database. Here we not allowing to cre
-
Please send me some interview quetions in ALE /IDOC's
please send me some interview qutions in ALE /IDOC'c it will help me a lot
-
10g - Gaps at top and side of applet. How can I remove?
Hi When running 10g webforms I have noticed that there are gaps at the top of and the side of the forms applet. This is causing our converted forms not to fit in the browser window without scrollbars (the presence of which further reduces the amount
-
Text frame not shown on windows server 2008
I am facing the issue that on windows server 2008 the frame of a text fields are not shown. On windows 7 there is no issue. As example I have attached two screenshots showing that on windows 7 the frames for precision and scale are shown, but on 2008