Unusual New Error Message

I am working with Final Cut Pro 6 (Studio 2) on a Mac with OS X (10.5.6), and for over a year now, I have archived master copies of client projects by:
- "Export > Quicktime Movie"
- Leaving all settings at default, including NOT checking "Make Movie Self-Contained"
- Clicking "Save"
* This results in a file with a .mov suffix that opens and plays in Final Cut Pro quite nicely.
Until recently.
Now, if the movie was something I've archived within this past month, when I double-click on it, I get:
"[filename]-FIN-0000008 cannot be found. Without this file, the movie cannot play properly."
What has happened, how can it be fixed, and most importantly: Are these archived files recoverable?

Yes, I just had a friend answer me by phone. I just ran an experiment regarding that, and you're both right. It means sometime this past month I bumped that check box and didn't even notice.
(It does not explain why a file from over a year ago has suddenly started doing the same thing even though I dumped its render files months ago, but oh well.)

Similar Messages

  • New error message...need help

    I got new error message in my application. it happened to even very simple test code
    like:
    An error occurred calling 'LogResults' in 'ITSDBLog' of 'DBLog 1.0 Type Library'
    An error occurred executing a statement.
    Schema: Generic Recordset (NI).
    Statement: UUT_RESULT.
    ODBC driver does not support the requested properties.
    -2147217887; User-defined error code.
    Step 'Log Results to Database' of sequence 'Log To Database' in 'Database.seq'

    Hello,
    I found 2 KnowledgeBase articles that I believe will be helpful in troubleshooting this Citadel ODBC issue:
    http://digital.ni.com/public.nsf/allkb/BD95183884B0F0F086256D3D0077C888?OpenDocument
    http://digital.ni.com/public.nsf/allkb/486B13FA750376A386256E8E0025DECB?OpenDocument  
    Some other things to try:
    It sounds like this has nothing to do with your code module and everything to do with TestStand communicating with the Citadel Database. Have you tried running a sequence with just one step (maybe a pop up) and turning database logging on and see if you get the same error?
    With warm regards,
    David D.

  • New error message :duplicate line item

    Hi,
    We have to add a new error message so that when we try to add a duplicate line item in our qty contract
    1.     we should not be allowed
    2.     we should get a error message u201Cduplicate line item not allowedu2019
    How to achieve this
    Thanks
    Arun

    Search this forum for "USEREXIT_SAVE_DOCUMENT" and "USEREXIT_SAVE_PREPARE".

  • A new error message when ck11n

    dear all:
    when i make standard cost calculate using ck11n,
    a new error message happened , that is 'costing item 00005 is not assigned to
    a cost component'.
    anyone can tell what should i do to reslove the problem.
    thank you a lot.
    bset regards!

    Hi,
    Please check T.code OKTZ.
    Regards,
    Murali

  • New Error Message in PP 2014 on Mac (/ppro801/releases/2014.03/shared/adobe/MediaCore...)

    Have been working on a large project on the same computer system (10.8.4) for months.  This morning, in one of my sequences, I highlighted the entire sequence, and proceeded to move everything down the timeline, as soon as I dropped the elements further down the timeline, a new error message popped up that I have not seen before.
    Nothing has changed on my system to my knowledge.  So far, it only happens in that single sequence.  There are many other sequences in the project functioning normally.
    Any ideas?

    I duplicated the sequence and things appear to be back to normal BUT I am hoping this is not the start of a larger problem with the project!

  • New Error Message 64-bit

    I installed iTunes 7.5, and there's a new error message when I connect the phone/start iTunes. It used to say use 32 bit version of windows. Now it says:
    The iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.
    This sounds like there should actually BE a 64-bit version of iTunes, but I don't seem to be able to find it. Ideas?

    No 64-bit version has been released that I've heard about or can find. The system requirements on Apple's iTunes web page still say that the 32-bit version of Windows is required. I can only guess that this is an error message that was intended for a future version (it certainly would seem to indicate that one is in planning/development) and that it's been inadvertently left in with phrasing that's currently not applicable.

  • Can't update Apps, now getting new error message

    It's been weeks since I've been able to update my Apps on either my iPod touch, or from iTunes. In iTunes previously, it would say that there were updates available, but then when I clicked on Update it would tell me that there were no updates available, now I'm getting a new error message that says "You can not update this software since you have not owned the major version of this software." WHAT???? These are mostly free apps, and the others I paid for. I'm so tired of this. And on my iPod touch I get "Can not connect to the iTunes store," even though I can make purchases, download podcasts, etc. Any ideas. Thanks so much.

    it's strange because not all update have this issue. I can update some free and paid apps ( over 10 update was succeful) and few (4-5)others have this problem and cannot be updated. Itunes didnt been updated since beginning of this issue.
    For the free one who cannot be updated, i just deleted already owned in itunes and re-downloaded updated version again without any problem.But for my paid apps, i will need to wait That apple fix it.
    I googled and i see this problem already happen in 2007 or 2008 but i just found problem report, no solution. I will try to spend couple minute to find out on google and try to call apple or contact apple expert on the web there tomorrow: http://www.apple.com/support/expert/ and come back to tell what they said. If someone found please post !!

  • [Solved] 'New' error messages during init after updating initscripts

    After updating to the latest initscripts, I got some error messages during init that I hadn't seen before.  They occurred during one of the UDev steps, and were caused by an attempt to load an IDE module despite the controller being disabled.  The controller shows up in Windows devmgr too, so I guess it's a failing of the mobo or BIOS.
    In any case, I downgraded and found that the errors were nothing new.  I'm just curious if the appearance of the errors during init was by design or a happy accident.
    Last edited by alphaniner (2011-08-01 17:07:30)

    alphaniner wrote:
    karol wrote:If you have the new (i.e. current) initscripts, you should be fine:
    http://projects.archlinux.org/initscrip … 328fbaf2e7
    http://projects.archlinux.org/initscrip … 42dfeca8c2
    I had never noticed the file before yesterday, actually. And I'm up-to-date, yet it's still full of 'em.
    You need to reboot.
    After you do, run
    tail /var/log/boot
    Mine isn't perfect, but I've already sent an e-mail to the dev (it's a matter of just a sed oneliner)
    [karol@black ~]$ tail /var/log/boot
    Tue Aug 2 05:03:01 2011: :: Setting Hostname: black ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:01 2011: :: Setting Locale: pl_PL.UTF-8 ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:01 2011: :: Setting Consoles to UTF-8 mode ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:01 2011: :: Loading Keyboard Map: pl ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:02 2011: :: Loading Console Font: Lat2-Terminus16 ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:02 2011: :: Saving dmesg Log ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:02 2011: INIT: Entering runlevel: 3
    Tue Aug 2 05:03:02 2011: :: Starting Syslog-NG ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:03 2011: :: Starting D-BUS system messagebus ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:04 2011: :: Starting acpid ^[[171G [BKGD] :: Starting gpm ^[[171G [BKGD^[[0;1

  • New error messages related to OHW - filling up error logs.

    We've recently received a new delivery of help files (new helpset), but there have also been many other changes to our base software system in the interim.  This makes it hard to nail down the culprit.
    That said, we are now seeing two messages in the error log any time we access help.  I'm wondering if anyone else has seen these, and have suggestions as to the root cause.  They are as follows:
    ...<OHWLoggerUtils> <errorFoundLinkToInvalidTopicID> invalid topic id link: STADG reported from http://127.0.0.1:7101/sta-help/faces/helppages/config.OHW+Servlet+1/locale.en/
    <OHWLoggerUtils> <errorFoundLinkToInvalidTopicID> invalid topic id link: STAIN reported from http://127.0.0.1:7101/sta-help/faces/helppages/config.OHW+Servlet+1/locale.en/
    <OHWLoggerUtils> <errorFoundLinkToInvalidTopicID> invalid topic id link: STAAG reported from http://127.0.0.1:7101/sta-help/faces/helppages/config.OHW+Servlet+1/locale.en/
    <DocumentUtils> <getDocument> ADFv: Trouble getting the mutable document from MDS.
    <DocumentUtils> <getDocument> ADFv: Trouble getting the mutable document from MDS....
    We are seeing many of these messages in a row, but they are all like the two types you see above.
    Just for completeness, there is one other error message filling our log which we also have not been able to resolve.  This one has been around for a while longer:
    <OHWFilter> <doFilter> Resource URLs should not contain "helppages.resource"; they should go through the servlet path "/ohr".
    <OHWFilter> <doFilter> Resource URLs should not contain "helppages.resource"; they should go through the servlet path "/ohr".
    ... <more of the same>
    Any help or pointers would be appreciated.  We are using JDev 11.1.2.3.0, and OHW 5.0
    Mitch
    < name, title, organization, telephone information deleted by moderator --  you need to post this to MOSC and not this public forum >

    Hey, tried uploading my first DPS app since August 28 and got rejected. I edited my folio and re- created the app, did the hole process again and today I uploaded the new app thru App loader. Everything was ok, but as soon as I clicked the review app in itunes connect, and the status changed to: "Waiting for review" Got an itunes Email saying this: ..."REDUNDANT BINARY UPLOAD - there already exists a binary upload with build version '32.0.0.8.99116' for train '1.0.7'... Once these issues have been corrected, you can then redeliver the corrected binary."...
    I am completely lost, I don't know how to solve this issue, don't know what steps to follow and im in desperate need of help. The app is a magazine and they've been waiting its launch since September 1st.
    The hole precess relies on me and I ran out of options... Can someone Help me?

  • Today's new error message in ACV and apps: "Enviroment: Sandbox"

    Hello,
    today we've noticed, that Adobe Content Viewer on iPhone and iPad start to show error message Enviroment:Sandbox with buttons Cancel and Ok.
    When i click OK, it asks for APple ID password.
    Now this same error appeared in my developer verion of single issue app. WTF???
    what is this error? Anybody else see this error too?

    Yes.  I'm getting the same thing?  It asks for my Apple ID password and then get the the following message:
    This is not a Test User account.
    Please create a new account in the Sandbox environment
    [Environment:  Sandbox]
    I received this error after having created my app via DPS App Builder interface. 
    What is this?

  • New error message in Photoshop Elements 12

    When I make a mistake in Photoshop Elements 12, I get an error message that says: "You must suck it up because you fu**ed it up." (I put in the stars because Adobe wouldn't let me put in the actual letters.) Does Adobe have a new policy to be rude to their customers when they make a mistake? Has anyone else at this experience with Photoshop Elements 12?

    That was the exact error message that I posted. I opened a JPEG and then tried to open it again while it was still open. I have nothing to vent other than this. I love Photoshop Elements 12 and use it on a daily basis. Tonight was the first time I encountered this "error message."

  • I am getting a new error message when opening Firefox, this is after I restarted my computer and uninstalled/reinstalled Firefox. Can someone help?

    Error message:
    Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

    I see. Well, I just tried to make IE my default browser, but it did not solve the problem. I receive the same script error when I view the image. (I may not have explained this thoroughly enough at first - I do get to view the image after answering the error message, but the print button embedded in the window doesn't work. Before, I never had a problem with viewing or printing.)
    I imagine that at this point I will either need to communicate this to the IE people, or possibly revert to an older version of IE.

  • IC Web Client  -- ADD NEW ERROR MESSAGE

    Hi all;
    I need to add a new error on the IC Web CTI toolbar to show an ‘Phone is busy’ error message whenever the outbound call status is busy. I have added the related message in the class through tramsaction SE91.
    Now I should implement the following code and the addings:
    lv_msgsrv = CL_BSP_WD_MESSAGE_SERVICE => GET_INSTANCE( ).
    lv_msgsrv-> ADD_MESSAGE ( iv_msg_type = 'E'
    iv_msg_id = 'CRM_IC_APPL_UI_BPID'
    iv_msg_number = '503' ).
    But I don’t know exactly where to implement; I created a new class ZCL_CRM_IC_ERRORCONTROLLER_IMPL but the method that I think I should put the code (GET_AND_PREPARE_MESSAGES) is a private method SO I Can not REDEFINE it. In this case I’m a little bit helpless about what I should do now.
    Any help in this regard would be highly appreciated.
    Thanks in advance!
    Best  Regards,
    Elif

    Hi,
    Following are the steps to add new fields to the existing view.
    - Create a new controller class (ZCL..) with original view class as super class
    - Create new BSP application with View and Controller
    - Attach the above Z class to the view and controller created and activate the BSP appln.
    - Go to transaction BSP_WD_WORKBENCH and type your BSP appln.
    - Expand your controller and at the Context class use Wizard to create new context node and bind this to Custom Controller class available.
    This whole process requires complte understanding of View, Controller, Custom controller and basic custom modifications to IC Web Frame work.
    Kunda Krishna Kishore

  • When starting InDesignCS2 received new error message -- InDesign is missing required system fonts or

    We are not able to start Indesign CS2 without getting the error message: <<InDesign is missing required system fonts or CMap files. Please reinstall InDesign.>> This is on WinXP.<br /><br />Recently I installed Creative Suite CS4. It took almost a day to install. The installation kept on stopping. Each time we were able to install one more program. After checking all of the programs we discovered that Firefox would not start due to a possible font error. After reading many posts I decided to uninstall a lot of fonts since I did not know which one was the culprit. <br /><br />However now I am missing a font (at least I hope that this is caused by a missing font and not anything else) that should be there and I don't know which one it should be. I did uninstall a <lot> of fonts and don't remember which ones.<br /><br />WE did uninstall all CS2 programs and then reinstalled only the necessary three. However that did not make any difference.<br /><br />Any ideas and suggestions would be welcome<br />Thanks<br />Pia Pehtla

    A forum search for "missing required fonts" brings up this thread which should solve your problem:
    http://www.adobeforums.com/webx?128@@.3bbdb0a7
    Peter

  • New error message--not found elsewhere on the Internet

    For the past week I've been getting this error message when I open iTunes:
    "The iPod 'Zach's iPod' cannot be updated. An unknown error occurred (-208)."
    My iPod, however, still appears on my desktop, under devices in iTunes, and iTunes updates it as well.
    Does anyone know what this message means and how I can correct it? I called AppleCare, but the representative had never heard of it either.

    Does this help?
    http://docs.info.apple.com/article.html?artnum=61031

Maybe you are looking for