Unusual problem: crashes repeatedly in itunes after latest ?keyboard update

Not wanting to divulge my sleep pattern too much( ),
I go to sleep at night by leaving the computer on, unplugging it and turning on itunes and the visualiser and letting it play a song on repeat. The computer is in full screen mode and it used just turn itself off when it ran out of juice.
Recently. since the last update, it crashes about 5 mins into this - the visualiser crashes, and the music hangs, playing the same chord dum dum dum dum dum dum dum.
The computer is totally frozen and the only shutdown option is keeping finger on the power button.
I went into settings and fiddled around with the power management settings to no avail.
Is there anything I can do?
thanks
tom

I did do a search first, and did not see anything current on Mavericks, except for some launch issues. The vast majority were on Windows boxes and did not appear applciable.
I don't consider this a launch issue because sometimes iTunes will run for hours and then crash. I am going to experiment with turning off auto-refresh of podcasts and see if that gives any clues.

Similar Messages

Ipod not recognised by iTunes after latest Ipod Updater Software loaded

Hi
Can you please help as I can't get my Ipod to work anymore with iTunes. I recently did a "clean-up" of my computer and removed a lot of old files to speed up my computer and whilst doing this I upgraded my iTunes software with the latest Ipod Software Updater. However, I can't get my iPod to work with iTunes anymore. I plug in my iPod and it starts to say "Do Not Disconnect" on the iPod screen but then it doesn't show up in my iTunes so I can't update my iPod.
I tried to use the iPod Software Updater "Repair" option but this just freezes my system and doesn't recognise my Ipod. I also get the error "Write Failure on this disk" showing up in the icons near my Computer Clock when I plug in my Ipod.
I've tried doing a system restore back to when the ITunes worked with the Ipod but this didn't fix it. I've tried removing iTunes and the iPod from my computer and then reinstalling them from the software from apple.com but it still doesn't work. The problem being is when I've deleted ITunes and the Ipod Installer I've lost my original HP + Ipod installation disk so maybe I'm missing some essential system files? I've used the Ipod Software Installer from apple.com to install the iPod files but I'm not sure whether I need the files from the original installation CD. Can I find the installation CD files from anywar
Please help!!
Thanks in advance
Amanda
Ipod 4G Click Wheel Windows XP Lost HP + iPod installation disk so used iTunes and Ipod Software Updater software from apple.com

Bump..please help!

Applications crashing after latest security update??

So i was prompted to download the new security update and the newest version of iTunes today. i do so, and upon start-up, i open adium and try to chat with a friend. before it could even open the IM window, adium chrashes. I updated adium and it still does the same. I then attempted to see if there were additional updates and the Software Updater also crashes instantly. i havent noticed any problems with other programs yet, but can anyone help me out on this one?
and the problems didn't start until AFTER the security update was installed

Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 4.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

ITunes won't open after latest OSX update

AFter latest OSX update iTunes won't open. Reinstalled iTunes. Reinstalled OSX update. When I click on icon in applications or in finder nothing happens.

This is what worked for me and others--original post found on this thread: Yosemite slow opening and cannot open itunes
This solved my question by Linc Davis.......
According to multiple reports on this site, Apple Support has given the following instructions to others who had a similar problem. I can't confirm that this procedure works or that it's necessary, but it won't leave you any worse off than you are now.
First, back up all data.
Select the iTunes icon in the Applications folder and open the Info window. Click the padlock icon in the lower right corner to unlock the settings.
In the Sharing & Permissions section, change the Privilege setting for each Name in the list to Read & Write. Close the window. If the settings aren't visible, click the disclosure triangle on the left so that it points down.
You should now be able to drag the iTunes application to the Trash and empty. Your iTunes data won't be affected.
Click the iTunes link at the top of this page, download the installer package and run it.
If iTunes still doesn't launch, or if you can't complete the procedure, reinstall the OS.

Could not open itunes after latest update

Could not open Itunes after latest update. Any sloutions??

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
 Cheers, Tom

After latest security update my MacBook is not finding any network. My network is ok, iPad and iPhone have no problems, but laptop is for all practical purposes turned into typing machine. Has somebody encountered similar problem? What to do?

After latest security update my MacBook is not finding any network and I think is not really turning wifi on. Has anyone encountered similar problem?

Checked the older discussion of the same type and found solution, well kind of... Thanks to other people who tried it, I just cannot remember their names at the moment. So, the solution for me was to turn off the firewall in the system preferences and suddenly lo and behold there was my network.

My iPhone crashing after latest IOS Update. Screen is not working anymore. I cannot use buttons, the screen is freezing up.Only thing I am able, is to 'restart' the phone. Now it does it after 5 minutes itself! Already removed en reset phone, no success!

My iPhone crashing after latest IOS Update. Screen is not working anymore. I cannot use buttons, the screen is freezing up.Only thing I am able, is to 'restart' the phone. Now it does it after 5 minutes itself! Already removed en reset phone, no success!
Can anyone help me?

Hi there Cinthia88,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W.

IPad mini will not let me access mail after latest software update, 6.1.2, seems to want me to sign in, but whenever I type my Id ad password it just says that the mail account already exists.. Still can't open my mail!

iPad mini will not let me access mail after latest software update, 6.1.2, seems to want me to sign in, but whenever I type my Id ad password it just says that the mail account already exists.. Still can't open my mail!
Help would be appreciated.

PhotogYogi wrote:
I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it.

HT201210 I have tried to restore my i phone via itunes after doing the update and it keeps giving unknown error occurred (3194) please help

I have tried to restore my i phone via itunes after doing the update and it keeps giving unknown error occurred (3194) please help

Hello Sam-marchesi,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694#error3194
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
Best of luck,
Mario

Even after latest soft update i still have apps wating to redownload again on my iphone , what do i do? also i heard i should email apple , whats the address?

even after latest soft update i still have apps wating to redownload again

In over three years, I have yet to have a problem or meet someone who has.
Most never have an issue.
As this is a support forum, designed for those with issues, of course you will see problems here ( many self inflicted). If you visit a hospital, you are likely to see many sick people, even though most are not sick.
It is really up to you, but most users never have an issue.
http://tech.fortune.cnn.com/2010/09/23/iphone-tops-j-d-powers-customer-satisfact ion-survey-for-4th-year-in-a-row/

Airtunes quit working after latest security update

My airtunes quit working after latest security update. Anyone else experience this problem?
In search of the fix, any help welcome.

Had to reset the Airport Express.

Garmin GLO portable GPS quit working after latest Apple update

Garmin GLO quit working after latest Apple update ?

I am using Mountain Lion. I reset the system a thousand times. The Mac communicates fine with the printer, that's not the problem. Somehow, recently something changed in the ppd file for the LaserJet 1320 that it simply does not print properly. For instance, I sent a job to print two pages, and use the duplex. The duplex works, but then the other side comes out empty. Is there a place I can find the old - less secure, I don't care, I just want to print - ppd file for controlling the printer? I think the printer only supports certain level of Postscript commands, and the new ppd file expects a new level. This printer is 8 years old after all. If I plug the printer in Linux, it prints the same document fine.
Thanks for any help

Opening folders after latest Intel update

Tell me... has anyone come across this problem? I just downloaded the latest intel update, and now I can only open my folders by right clicking. I've already made sure the user file wasn't corrupt. Yet, everything else works just fine when I double click. This is driving me crazy. Someone, please help.
MacBookPro Mac OS X (10.4.9)

From Macfixit........
Re-apply combo updater for various issues. At the risk of playing like a broken record, we cannot overstate the value of re-applying the Mac OS X combination updater as a solvent for various issues apparent after using the standard, delta (adjacent version-to-version) updater to migrate to Mac OS X 10.4.9. The delta updater is automatically used by Software Update if your current system iteration is 10.4.8. Re-applying the combo updater overwrites potentially problem-causing files that were not replaced by the delta update. Download link is as follows:
http://www.apple.com/support/downloads/macosx1049comboupdateintel.html

Safari can't connect after latest Lion update

Just updated my software and now safari can't connect to websites. It connects for a bit then after awhile it will no longer connect. Firefox and Chrome are connecting fine so this is a safari only issue with the latest update.
Safari Version 5.1.5 (7534.55.3)
Quiting safari and restarting works for a little while then eventually 'can't connect to server' eventually appears. I'm going back to firefox until this is resolved.

Linc Davis
Currently Being Moderated Re: Safari can't connect after latest Lion update
Apr 2, 2012 5:35 AM (in response to rtorca)
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.
Hi I have the same sort of problems I carried out the two tests and the problem appears to only be in my profile not in guest profile. Is there a cure?

VMware wont start after latest kernel update!

Okay when i went to reboot it went to boot into arch but wile it was loading the vmware modules it would stay stuck at loading vm communication interface socket family and would just stay there the only way i could even boot into arch was to edit my grub so i could login and at least comment out vmware i tried to reapply the vmware patch fix that was on the wiki and had no luck also tried reinstalling + reapplying patch after words and still no luck I'm hoping this is happening to someone else as well and not just me (mean i know lol) I also tried virtualbox but seems it has it's own mess of problems as well after latest kernel update.

I have tried rebuilding the the kernel image and even tried reinstalling grub with no luck. After not having a usable system for several days I ended up just having to reinstall and maybe found out more about the problem. Using the net install image and a 64 bit install this time making a EXT2 boot and a root partition of JFS right after install I get a panic during boot about how the system can't find a valid filesystem on what would be root partition. Even when passing the "rootfstype=jfs" to the kernel line in grub it still errors out telling me that it is "Bailing out, your on your own. Good luck!" (pretty funny error messages if you are not ripping your hair out). After that I redid the install this time making a EXT4 root partition and everything is working.
It seems to me that this all points to a problem with JFS on 64 bit systems, my other systems are all 32 bit and usign JFS root just fine... can anyone else confirm this?
Last edited by vendion (2011-01-12 13:39:56)

Unusual problem: crashes repeatedly in itunes after latest ?keyboard update

Similar Messages

Maybe you are looking for