Unusual problem in 5800 while sending a message to...

hi recently i found a strange problem in my phone 5800 xpress music.Whenever i send a message through groups or if i select and send it to like 10 ppl ,suddenly a error message pops up saying messaging already in use.It happens till the message is sent for each and every person and then stops.This problem started to arise after the firmware update.Please help me to solve this problem.

Search versiontracker.com or macupdate.com

Similar Messages

Problem while sending the message using RWB

Dear All,
I am facing a problem while sending a message from RWB. I sent the message using Test Message in component monitoring, it says message sent but I am not able to see any message in sxi_monitor.
When I send the same message using the http client it successfully processed by XI and I can see the success message in sxi_monitor.
Please let me know if anyone has face similar kind of issue.
Thanks,
Alok
Edited by: Alok Raoka on May 26, 2008 5:08 PM

Dear All,
I am facing a problem while sending a message from RWB. I sent the message using Test Message in component monitoring, it says message sent but I am not able to see any message in sxi_monitor.
When I send the same message using the http client it successfully processed by XI and I can see the success message in sxi_monitor.
Please let me know if anyone has face similar kind of issue.
Thanks,
Alok
Edited by: Alok Raoka on May 26, 2008 5:08 PM

I cant use imessages, it tells me that it had an error while sending a message

i cant use imessages, it tells me that it had an error while sending a message, but it can do all the other things.

I have a third generation iPod touch, newest software version, wifi is on, address in contacts, phone number in contacts. I can start to send a message, it gets close to the end and then fails to deliver. I have read the trouble shooting guide and followed all directions. I can send from my iPad just fine, but not the iPod. Any ideals?

An error occurred while sending the message

I compose a email.When I click the send link ,an error occurs. The error page said "An error occurred while sending the message". Could anybody tell me what's wrong. Thanks.

Hi,
lsnrctl is not not able to start listener running on ports < 1024. Try starting the listener with the tnslsnr tool directly. My recommendation is to start it as root directly, so you don't have to set the s-bit.
<midtier_home>/bin/tnslsnr listener_es -u <uid> -g <grpid> &
Regards
Christian

Problems using Siri to send text message

hi im having problems using Siri to send text messages on my iPhone 5.
When i try to send a message using Siri to somebody who does not own a iPhone Siri defaults the message to a iMessage instead of a standard text message, which then causes a message failure because the other person does not have a iPhone.
I have the setting turn on in the Messages setting to send as Text Message when iMessage is not avaliable but Siri still defaults the message to a iMessage and does not send it as a standard text message and results in a message failure.
am i doing something wrong or am i missing something?

Siri won't try to send an iMessage to a person who doesn't have a device with iMessage enabled.
If you open Messages, and select the same person with the keypad it should default to Text and not iMessage. That's exactly what will happen when Siri tries to send the message.
I just tried this on my phone to someone who doesn't have an iPhone and it worked exactly that way.

Unusual problem while sending a message to many pe...

hi recently i found a strange problem in my phone.Whenever i send a message through groups or if i select and send it to like 10 ppl ,suddenly a error message pops up saying messaging already in use.It happens till the message is sent for each and every person and then stops.This problem started to arise after the firmware update.Please help me to solve this problem.

If the file is not generated dynamically, i.e. if it is static in a directory, why are you using servletoutputstream to read and send it to the browser? Why not just provide a href link to the file?

Error while sending a message 501 not implemented

Hi all,
running some tests checking some Xi interfaces we have the following problem :
going to Runtime Workbench --> Component Monitoring --> Adapter Engine e clicking on the Tab "Test Message" we insert Service, Interface, Namespace, Quality of Service, user and password
On "send message to" we insert the string:
http://apl06gjbx:8031/XISOAPAdapter/MessageServlet?channel=:BSY_CDFS_CRISP_DX8:CC_SOAP_IF_KE_02_In
Executing "Send Message", we get the following error :
"error while sending message : 501 not implemented"
Any suggestion ?
thanks in advance

Hi all,
using a 53100 port and xml code in payload it seems better but we get the following error:
com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
Display Stack Trace
com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:328)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at jsp_FC_Secure1185456171353._jspService(jsp_FC_Secure1185456171353.java:24)
     at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:215)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.NullPointerException
     at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doProcessAfterInput(CmDynPage.java:60)
     at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:101)
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
     at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
     at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doPost(CmPageProcessor.java:35)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     ... 20 more

Error while sending the messages to JMS Queue

Hi ,
I am trying to pick the file from JMS Queue and send the response xml as outbound message to JMS Queue again using XAI Sender
I Created XAI Sender, Outbound Message Type(DM-RCVRESP) and configured these two with External System.
I am able to pick the file from JMS Queue but unable to send the message through XAI Sender (Real-time)
Plz find below the error trace getting.
[Wed Jun 15 16:12:09 IST 2011] Error while processing sender "UPLOADSTG" : Unable to update response in staging table: Row id not given.
com.splwg.mpl.sending.SameThreadSendingManager$ProcessException
     at com.splwg.mpl.sending.SameThreadSendingManager.processDestination(SameThreadSendingManager.java:341)
     at com.splwg.mpl.sending.SameThreadSendingManager.sendResponse(SameThreadSendingManager.java:293)
     at com.splwg.mpl.sending.SameThreadSendingManager.doSend(SameThreadSendingManager.java:249)
     at com.splwg.mpl.server.async.ExecSendRequestProcessor.ProcessRequest(ExecSendRequestProcessor.java:61)
     at com.splwg.mpl.server.async.RequestProcessingThreadAdapter.run(RequestProcessingThreadAdapter.java:46)
     at com.splwg.mpl.server.PooledThread.run(PooledThread.java:91)
     at java.lang.Thread.run(Thread.java:662)
Please guide me in this regard..
Thanks,
sukumar

What have you configured for the response tab for the sender? Are you using the MPL or the MDB?
Take a look at:
MPL Best Practices (Doc Id 1308165.1)
Oracle WebLogic JMS Integration (Doc Id: 1308181.1)

No reply got while sending a message

Environment: SCO Unixware 7.1.1, Tuxedo 6.5, Windows 98(client)
While the client sends a message(photo) which size is near to or over 16K Bytes,
to the server, the client gets no reply. Seems the server can not get the request.
Does anybody know the reason.
Thanks in advance,
George

"George" <[email protected]> wrote:
>
Marcin Kasperski <[email protected]> wrote:
"George" <[email protected]> writes:
Environment: SCO Unixware 7.1.1, Tuxedo 6.5, Windows 98(client)
While the client sends a message(photo) which size is near to or
over 16K Bytes, to the server, the client gets no reply. Seems the
server can not get the request. Does anybody know the reason.No space in queues?
Check the ULOG* file. Sometimes it happen that Tuxedo throws the
message away (for me it was more troublesome when the server
succesfully processed the message but Tuxedo was unable to send it
back, leaving the client waiting forever on tpcall).Thanks, Marcin. But in my case, the server seems receive no request(no
information
in the ULOG*), and the client waits forever on tpcall. Do you have any
further
idea in this case.
Thanks,
GeorgeGeorge,
I would try the following troubleshooting steps:
1) On the server, go into "tmadmin" and do a "pclt" to make
sure the client is getting connected.
2) On the Win98 box, do a "set TMTRACE=on" before starting the app.
This will place trace messages in the ULOG. You can see
when a "tpcall" is executed and what arguments are passed.
3) You can find Ethereal, a freeware packet sniffer at
www.ethereal.com. You can see if the request is even leaving
the Win98 box and making it onto the network and to the server.
4) If the request is making it to the server, shutdown all your
servers, do a "export TMTRACE=on", and restart the servers.
This will place debug messages in the ULOG on the server.
You should be able to see any ATMI calls that are made.
5) Attach to the server with a debugger and set a breakpoint
in "msgrcv". This is the Unix system function call
that gets a message from a queue. If it never gets called, then
your message is not reaching the server's queue.
If it does get called, set a breakpoint in your service routine
and continue stepping through code.
6) You can also go into "tmadmin" and do a "pq" to see if there
is a request in the server's queue.
Hope that helps,
David

Error while sending SOAP message to PI

Hi Guyz,
I have a sync-asyn scneario SOAP to File via PI. When I test the scenario using test tool i.e SOAP UI , scenario runs fine. But when user is trying to send a message they are getting Error message as response . "No SOAP Envelope but 1 {}.
Any idea what is this error. I tried to test the scenario with the same XML message that they are using.
Regards,
Loveena.

Hi Loveena,
What kind of application tries to connect with PI?
Have you tried to mark Use No SOAP Envelope (Point 4. https://help.sap.com/saphelp_nw73/helpdata/en/48/3555240bea31c3e10000000a42189d/frameset.htm)?, in this way you can check that the message at least comes to PI.
Regards.

Problem with &amp while sending xml as string to webservice

Hi I am also facing a problem I want to send a string to my sap webservice into the following format
<DATA><STRUCTURE VAL="FLASH"><VALUEPART VAL="40100"></VALUEPART></STRUCTURE><STRUCTURE VAL="FLEX"><VALUEPART VAL="2000"></VALUEPART></STRUCTURE></DATA>
But whenever I am sending this string to my webservice in webservice it is reading this data like
&lt;DATA>&lt;STRUCTURE VAL="FLASH">&lt;VALUEPART VAL="40100">&lt;/VALUEPART>&lt;/STRUCTURE>&lt;STRUCTURE VAL="FLEX">&lt;VALUEPART VAL="2000">&lt;/VALUEPART>&lt;/STRUCTURE>&lt;/DATA>
Please help me to solve the problem .

Thanks for your reply but now I am using escape(srting) and server side script reading it as
%3CDATA%3E%3CSTRUCTURE%20VAL%3D%22FLASH%22%3E%3CVALUEPART%20VAL%3D%2240100%22%3E%3C/VALUEP ART%3E%3C/STRUCTURE%3E%3CSTRUCTURE%20VAL%3D%22FLEX%22%3E%3CVALUEPART%20VAL%3D%222000%22%3E %3C/VALUEPART%3E%3C/STRUCTURE%3E%3C/DATA%3E
I have to send this as
<DATA><STRUCTURE VAL="FLASH"><VALUEPART VAL="40100"></VALUEPART></STRUCTURE><STRUCTURE VAL="FLEX"><VALUEPART VAL="2000"></VALUEPART></STRUCTURE></DATA>
any other option ?

Problem while sending multiple messages to JDBC

hi
I am trying to run a scenario file to jdbc(multiple).
Inserting row into table with the file details and updating the same row.
I created 2 message mapping and 2 operation mapping. One mapping to insert row and second to updated the same row.
In ID did configuration 1 Sender Agreement, 2 Receiver Agreement ,1 Receiver Determination(Using Same system for both receiver), and 1 Interface Determination (selecting multiple operation mappings in this interface determination).
The scenario is processing successfully in moni and channel, Problem here is only UPDATE message is going to the Database always. In both the channels UPDATE message is going. I have checked "Maintain Order at Runtime" option also its not working.
Please help.

HI Jabbs,
Check help.sap.com, in receiver JDBC processing tab-> Maximum Concurrency
Enter the number of messages to be processed in parallel by the receiver channel. For example, if you enter the value 2, then two messages are processed in parallel. Default value is 1 and this means only one message can be processed at a time by the receiver channel.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/22/b4d13b633f7748b4d34f3191529946/frameset.htm
also paste here the receiver structure from MONI, so as to see whether the structure is as per the required format
Regards
Suraj

Nokia 5800 - cant send text messages!

Can anyone help to solve this one? I can receive text messages on my new 5800 but can't send them. Just get a message saying 'failed'
Have I missed something?
Rachel

To me it seems like your mobile carrier is blocking the option to change these settings. Try calling them and ask them what to do, because this does not sound like a phone problem.
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

JDBC Adapter: J2EE server crashes while sending large messages

We want to use the following scenario to transfer data from a MS SQL Server to SAP BW via XI:
JDBC Sender Adapter XI SAP ABAP Proxy.
All works fine with a small amount of data. But if the select statement delivers too many record sets and the size of the transformed XML payload is greater then 50 MB the J2EE server crashes. A complete restart is necessary. It seems to be am memory problem.
Here are the entries from our log files:
dev_server0
[Thr 6151] Mon Jul 24 12:46:57 2006
[Thr 6151] JLaunchIExitJava: exit hook is called (rc=666)
[Thr 6151] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 940893 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 6151] SigISetIgnoreAction : SIG_IGN for signal 17
[Thr 6151] JLaunchCloseProgram: good bye (exitcode=666)
std_server0.out
FATAL: Caught OutOfMemoryError! Node will exit with exit code 666java.lang.OutOfMemoryError
Is this a general problem of the XI or a specific one of our configuration? Is it possible to transfer such large messages via XI? If not, is there a workaround for such scenarios?
(Memory heap size of the J2EE server is 1024 MB.)

> Hi Gil,
>
> i had nearly the same problems some times in praxis
> and the mapping was the reason. Just change your
> interface determination temporary, delete the mapping
> and test again to find out if the mapping is the
> reason.
>
> Regards,
> Udo
I have changed my interface determination so that no message mapping is used. The J2EE server still crashes.
> Hi Gil,
> This does sounds like a memory problem especially
> when it comes to 50M message with a minimum XI sys
> requierments...
> To be sure you can check on the RWB for the
> componnent monitoring at the JDBC adapters and look
> for your adapter
> look at the status of the adapter and the trace
> there...
Hi Nimrod
In case of such an error I have no entries in channel monitor. So I can't see anything there. I have also no entries in message monitor of the RWB in this case. So I don't get any information with standard XI tools.
> My reccomendation to you is to set the poll intervall
> to a shorter period,this way you'll make sure you get
> less records...I hope you have remembered to add a
> status/flag column on the table to be set after
> selection so no duplicate records will be taken on
> the second pools.
>
The problem is that the source of my data is not a simple SQL statement but a stored procedure. So I don't know exactly how many records will be delivered. A update command is not possible.

Anybody having problems in Mail when sending reply messages from a thread and the message is not showing in the Sent mailbox?

Hello Folks;
Got a weird one...
I am sending replies from a thread in Mail and they seem to have been sent (sounds) but they don't show in the Sent mailbox... O-0 These messages seem to have been delivered to cyberspace as they don't show in my Sent mailbox on my IMAP server... This has been happening for the last month... I have checked and verified all of my IMAP settings and Mailbox behavior settings... This is really weird and maybe a bug.... I checked all of my other clients that have access to the server on the same account and these messages do not show there either.... Any ideas?
--prd54usa

The messages are getting to the recipient...
I am on a Comcast IMAP server if this has anything to do with it and the server settings are following the correct server port numbers, SSL settings, etc... I save Sent messages on the IMAP server for 90 days.... None of these "disappearing" messages were on the server for more than a couple of days.. Typically, these messages will get 'hung' in the Outgoing Mailbox for @30 seconds before sending... like they are being scanned for viruses or Mail can't connect to the server all of a sudden...
I anybody else here is on a Comcast IMAP server, and having this problem of disappearing Sent messages... This would tell us that it might be a Mail Provider issue with their outgoing server...
--prd54usa

Unusual problem in 5800 while sending a message to...

Similar Messages

Maybe you are looking for