Unusual problem w/ Enya's watermark CD--

any idea why my imac or itunes will not recognize my enya watermark CD--it is a manufacturer store bought copy, plays perfectly on any CD player i put it on. However when I put it into my mac to play or to get itunes to rip it--it does not even realize anything is in the drive...no little icon either on my desktop or itunes. it is like there is no CD in the slot.
this is the only one in over 50 CDs that my computer does not recognize to play or to copy (as stated, it doesn't even recognize the CD is in the drive).
Is this simply perhaps my particular copy of that CD or does enya or that particular company have something on the CDs so no computers can read it (perhaps to prevent any copying).
realize this is a very specific question but perhaps some companies or artists do this?

when I put it into my mac to play or to get itunes to rip it--it does not even realize anything is in the drive...no little icon either on my desktop or itunes. it is like there is no CD in the slot.
Take it back to the retailer. Tell them it is defective and request a refund.
or that particular company have something on the CDs so no computers can read it (perhaps to prevent any copying).
Not relevant, and do not entertain this discussion when you return it. If it will not rip, it is not suitable to its purpose and is defective.
Windows XP

Similar Messages

Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring,so i open cimcas now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.

Unusual problem using Arial Black font with #'s

We have encountered a rather unusual problem.
Recently one of our customers contacted us about a problem with their job. They used #'s in arial black and regular throughout their document. Everywhere the #'s were in Arial Black they came out looking like an entirely different font. All of the files that we have created from their document appear correctly. Even the proofs created from the files printed correctly. However at the point of Esko's Nexus program creating the tiff file to make the press plates we are getting the incorrect results. I have even created a new document using our fonts in multiple sizes and I am getting the same results. As you can see the rest of the text in the same font is imaging properly. It is only the #'s that are the problem.
This is a screen capture of the PDF I created:
This is a screen capture of the results from the plate tiff image:
I am positive that it is not an issue with Esko's Nexus software as I have recreated this text in Quark, Miccrosoft Word, and Microsoft Publisher and they all imaged properly.
I am only encountering this with Adobe software. I am getting the same results from both InDesign and Illustrator. I have run the file from multiple Macs with various OS systems and from a PC each with their own font sets. I have even run the file from all versions of InDesign that we own (CC2014, CC, CS6, CS5.5) and they ALL give me incorrect results. As you can see from the images above it is ONLY the # character in Arial Black that is a problem.
I'm at a loss as to how to solve this problem.
Larry Meirndorf
BRD Printing
Prepress Supervisor

Images of full font set:
Correct from Quark:
Incorrect from InDesign:

Unusual problem with N95

Hello guys, as title says i have an unusual problem with my Nokia n95. Friend gave me few days ago and I wanted to update software at it, i did it few HRs ago (from 21.x to 31.0.017) and now I have problem. The thing is from when i did the update the phone keep lighting camera and up-down buttons from some time intervals( i'm not sure how much). I even did Initial restart and i've re-installed software also.. Any idea how to fix this ?
Thanks anyway!

Yeah thats what i did last, for now it's not lighting every time just when I ( for example enter camera, make photo/zoom and close application,after that i'ts lighting for few minuts), it's not about mask, I've tested it already with not mask ..
It never happened before I updated the device..

Unusual problem with NumPad

I have quite an unusual problem with my iMac and I'm hoping someone has the answer. I will do my best to explain what's going on.
I started using a new program called Blender, which is an open source 3D modeling suite. In it, there are hotkeys which are required to function the program, like, CONTROL + NUMPAD 1, 2, 3 and so on...
I have a full size keyboard with NUMPAD, so this is not a problem for me. However...
When I attempt to press CONTROL + NUMPAD 1 (for example), it does not trigger the correct function in Blender. Instead, it switches SPACES to the corresponding SPACE. So, if I press CONTROL + NUMPAD 3, it displays my THIRD SPACE.
This seemed simple enough to fix. I opened System Preferences, Keyboard, Keyboard Shortcuts and changed the hotkeys for SPACES to COMMAND, rather than CONTROL. However, this did not fix the problem entirely. Even though it managed to disable my top row of numbers as hotkeys for switching spaces, it did NOT change the NUMPAD functionality. If I hit CONTROL + NUMPAD 3, it STILL switched to my third space, despite me altering the hotkey to be COMMAND + #. It continues...
I didn't really need this functionality from SPACES so I decided to try disabling it altogether. Once again, I opened System Preferences, Keyboard, Keyboard Shortcuts but THIS time, I unchecked "Switch to Desktop 1,2,3,4" hotkeys so as to disable the funtionality entirely. Despite this, it STILL did not work. I was STILL able to press CONTROL + NUMPAD #, and switch to the corresponding SPACE. I restarted OS X hoping something might change but it did not. I CANNOT disable this functionality and it is hijacking the ability to operate the Blender program.
The problem gets stranger...
I ask my Fiance, who has an identical iMac AND keyboard, running OS X Lion just as I am to attempt to perform similar actions. She was NOT able to switch SPACES by pressing CONTROL + NUMPAD #. Ironically, under HER system preferences, the keyboard shortcuts were all enabled and defaulted to CONTROL + #, yet she could not duplicate my problem on her iMac. As you can imagine, I was getting quite confused at this point and very frustrated. We tried switching keyboards. Same thing. On my iMac, I cannot disable the SPACES hotkey CONTROL + NUMPAD # and on my Fiance's iMac, she can not ENABLE it.
In summary, whenever I press CONTROL + NUMPAD #, OS X switches to the corresponding SPACE. I've tried disabling the shortcuts under System Preferences but the problem persists. My Fiance has the exacty OPPOSITE problem and cannot enable the functionality. It's not the keyboard and we're running identical iMacs running OS X Lion. Any help would be INCREDIBLY appreciated! Thanks!

As a matter of fact, I do have a solution, at least, one that one my laptop.
First, a couple of trouble shooting steps:
Create a new user a log as the new user. If the new user doesn't have they Control-Numpad issue, you are probably looking at a user preferences issue.
Start in safe mode (hold shift while booting). Any number of extensions may map these keys for you (as a favor, of course)
That said, I suspect that this is a user preferences issue; such as it was for me.
The solution is to remove the symbolichotkeys property list file; it should be regenerated cleanly when you next log in. The two files you need to remove are:
~/Library/Preferences/com.apple.symbolichotkeys.plist
~/Library/Preferences/com.apple.symbolichotkeys.plist.lockfile
I always suggest having a system backup before fiddling, and I moved the files to my desktop temporarily (just in case!) before rebooting, testing, and finally deleting them.
Here is some information on the files:
http://hintsforums.macworld.com/showthread.php?t=114785
Let me know if that solves your problem; it was a bear to track down.

Unusual Problem in SAP Query

Hi Experts,
I am facing a very Unusual problem in during SAP Query Devlopment.
In Input screen I am taking value as User , which is coming from User02 table and field name is
Bname . In USR02 table Username is maintained boths as Numeric num ( like 1236533) and Username wise ( Like gd.anil etc).
But While running the query , Its execute only when giving the nUmeric Num , It wont executes if i give the name like gd.anil .
This gd.anil is also maintained in USr02 table .
Can anyone tell me why its happening.
Thanks .
Koro

If the user ID is actually stored as lower case, then it was entered directly or with a screen field that doesn't have a screen mask. You are most likely using the DB field in your selection screen and it's being converted to upper case after entry but before selection. Have you debugged the generated program? You should see this in the query.

Unusual Problem caused by/with flash?

An unusual problem recently developed from flash and cannot resolve. I am running windows XP service pack 3 and i have flash 10.1 running. The problem that i have run into is this, when i have the internet browser open and i leave it idle for 5 minutes a windows error message comes up that says:
Could not find file "Flash.ocx"
Prior to 8/10/2010 this never happened, additionally I have looked in the appropriate folders on my system and the program seem to be there. I have also checked the program with Adobe and there system says program is up to date and functioning properly on both internet browsers that I use which are: IE8 and Google Chrome. Can anyone help to identify this problem as i am unsure of what steps to take to correct this issue and Microsoft has become completely useless.

Hi, I would not suggest a System Restore, especially if you have all Flash Player files and the SWO correctly Installed.
There could be another reason if you continue to get that message. System Restore is not a "fix" per se, it is there for your Windows Operating System in case of failure. I know people use it for other reasons, but just speaking for myself, I never have. I just research and find out the solution to whatever issue I may have at the time.
Any add on in your IE browser from whatever source can conflict with the browser, Flash Player (the SWO ActiveX Control) or other add ons. Especially any Anti-Virus program add ons. So you may want to check those to see if that is happening. Toolbars and their browser add ons also.
Go to C:\Windows\System32\Macromed\Flash Open Flash and post back all files listed there just to make sure they are correct.
Thanks,
eidnolb

Unusual problem, my mail in inbox dissapears!

Hi,
Just got an new Mac Mini. Imported everything automatically from my old G4 onto it. But....
My Mail Inbox is acting strange. ALL THE OTHE MAILBOXES ARE FINE, but the inbox shows I only have 91 messages when I used to have around 1000!!
On top of this, a random selction of messages in (and only in) the inbox don't display and instead show in italics something along the lines of "message cannot be displayed as it cannot be downloaded until account is taken online" or something along those lines.
The thing is, the account IS online and is working fine in all other aspecs. It is a POP3 account.
I have tried re-importing manually. No luck.
ANY IDEAS ANYONE? I NEED MY MAIL BACK!!!!
Thanks

Hi RedHavoc.
Not sure what makes you think this is an unusual problem. Actually, it's quite common. The conversion from Mail 1.x to Mail 2.x is broken. Take a look at the following thread to better understand the problem:
Help! "You need to take this account online in order to download it."
In particular, you may want to take a look at the following article (also referenced in that thread) to learn what you might have done before upgrading to minimize the risk of this happening, and what you may do after fixing the problem to avoid similar issues from happening in the future. DON'T do now what the article suggests, though, as that would make things worse in the current situation:
Overstuffed mailbox is unexpectedly empty
More specifically, if this is a POP account, the following procedure should allow you to fix the Inbox problems:
1. Quit Mail.
2. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong while trying to fix the problem. You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is stored.
3. Create a new folder on the Desktop and name it however you wish (e.g. Inbox Old). It doesn't need to have an .mbox extension.
4. In the Finder, go to ~/Library/Mail/POP-username@mailserver/INBOX.mbox/.
5. Move the files mbox and Incoming_Mail out of INBOX.mbox, into the Inbox Old folder just created on the Desktop. These files contain all the messages that were in the mailbox before the upgrade to Tiger, and maybe even some messages that had been deleted. mbox is the most important. Incoming_Mail may or may not be present.
6. Move any strangely-named Messages-XXXXXX folder to the Desktop (not into the Inbox Old folder). These folders are to be deleted after fixing the problem. They are temporary folders created during an import or an indexing process, and Mail should have deleted them when done. Their presence is a clear indication that something didn't work as expected. If you've been using Mail after the conversion and have already tried to fix the problem by rebuilding the mailbox or something like that, they might contain messages that are neither in Messages proper nor in the mbox file, so keep them around until the problem is fixed.
7. Move everything else within INBOX.mbox, except the Messages folder, to the Trash.
The result of the above should be that INBOX.mbox contains the proper Messages folder only, and the Inbox Old folder on the Desktop contains the mbox and Incoming_Mail (if it exists) files only. Now, proceed as follows:
8. Open Mail.
9. The account's Inbox should properly display in Mail as many messages as *.emlx files are in ~/Library/Mail/POP-username@mailserver/INBOX.mbox/Messages/. If that's not the case, select the mailbox in Mail and do Mailbox > Rebuild.
10. In Mail, do File > Import Mailboxes, choose Other as the data format, and follow the instructions to import the Inbox Old folder that's on the Desktop. Do with the imported mail whatever you wish. You may move to the account's Inbox the messages that Mail failed to convert properly, and delete those that did get through and, hence, are duplicates now.
The following collection of AppleScripts has a Remove Duplicates script that can be useful for removing duplicate messages:
http://homepage.mac.com/aamann/Mail_Scripts.html
If all is well and you're not missing anything, the files on the Desktop can be deleted, although you may want to keep them for a while, just in case.
Ask for any clarifications or if you need further assistance.
Note: For those not familiarized with the ~/ notation, it refers to the user's home folder, i.e. ~/Library is the Library folder within the user's home folder.

I'm having an unusual problem with my iphone 4S. When I'm making a call, it suddenly sounds like my call has been invaded by aliens! Why is it doing this? I'm also having problems sending texts. Sometimes it sends sometimes it doesn't.

I'm having an unusual problem with my iphone 4S. When I'm making a call, it suddenly sounds like my call has been invaded by aliens! Why is it doing this? I'm also having problems sending texts. Sometimes it sends sometimes it doesn't. What is going on? Can it be fixed? I'm really not liking this new phone!!!!

Could be an issue with your Carrier and/or location...
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore from Backup... Restore as New...
Try a Reset...
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
http://support.apple.com/kb/ht1430

Unusual Problem with Yahoo and Apple Mail

I hope it doesn't turn out that the user is the thing that is "unusual."
Background:
Devices: MBP, iPad, iPhone, iMac
Mail accounts: Gmail, mobileme, Yahoo
MBP settings: uses "default ports", SSL, and user name and password - Advanced Tab: Port 993 and SSL
iPad/iPhone settings: SMTP server settings - grayed-out - with SSL checked and Port 465
As of last night, I found four messages that were stuck in my Sent box, with the spinning gear that would not stop. This only happens when using my Yahoo account, and it only happens when sent from my MPB. It is also only related to outbound messages.
Now for the part that has me perplexed. My password for Yahoo (web), is the same as the password on my MBP (Apple Mail). The passwords that I have on the iPhone and iPad, are the same for both, but they're different than the password for the previous two that I mentioned. When I changed the password on my MBP to match the one that's on my mobile devices, it came up with an error for an incorrect username or password.
How can I have different passwords and still have mail working? What am I missing? Also - more to the point of my issue, can anyone offer some suggestions as to why the outbound side of Apple Mail, is not working for Yahoo?
Thank you.

Sorry...it's too bad you can't delete questions... Problem solved - port number needed to be changed, and the password was deleted for some reason. I still don't know why I see two different passwords for the same account.... Thanks for looking.

Unusual problem in 5800 while sending a message to...

hi recently i found a strange problem in my phone 5800 xpress music.Whenever i send a message through groups or if i select and send it to like 10 ppl ,suddenly a error message pops up saying messaging already in use.It happens till the message is sent for each and every person and then stops.This problem started to arise after the firmware update.Please help me to solve this problem.

Search versiontracker.com or macupdate.com

Problems with Vista and Reader 8.12 - unusual problem need help

I can't seem to find anyone to help me or any record of someone else having this problem. As soon as I install reader 8.12 on my new system (Vista) it begins 'hijacking' other files. In other words other icons on my desktop (e.g., the icon for AOL IM) turn into PDF icons and so when I try to launch an .exe file - Reader launches instead and of course tells me it can't open the file. This is so maddening. I've installed and unstalled the program several times and have rebooted. I've tried to contact Adobe but they will not provide support, I've contacted Gateway and they say it's an Adobe issue and Microsoft won't speak with me because Vista was pre-installed on the computer. If anyone has any ideas and can assist me I'd greatly appreciate it. For now I just have to leave the program uninstalled and therefore can't open any PDFs.
Anita

It seems that in Vista bad things may happen if you ever choose a
program to open downloaded EXE files.
This may help with the EXE issue:
http://www.winhelponline.com/articles/165/1/Restore-the-exe-file-association-in-Windows-Vi sta-after-incorrectly-associating-it-with-another-application.html
Aandi Inston

Unusual problem

Dear all,
We have problem with a user few days before,while updating exchange rate daily,
Suddenly all datas disappeared for a moment & reappeared,we also encountered
problems before while entering goods issue & also in receipt from production a month before.
What might caused this problem ?
Jeyakanthan

Gordon,Most of them are using SAP B1/Excel sheets only.
Julie,Not using alert management at all.
Whether problem may be caused by large database,
it's live db for 2 years with 3.1GB db size currently?

Unusual Problem with Matrix

Hi Guys,
I have a matrix which is on the UDO form. I have bound all the columns with DB DataSources. I have one column of combobox type where in the back end i have the valid values
"1-Approved"
"2-Pending"
"3-Rejected"
The problem here is that when the form is opened the matrix column only shows values 2 and 3 ("2-Pending","3-Rejected").
I also have another Column with 2 Valid values, again facing the same problem. Only one value is being shown.
But in the backend when i check in the "Manage User Fields" Screen all the 3 Valid values are visible.
Am i doing something wrong..??
Thanks in Advance,
Vasu Natari.

Hi,
For me, even if the validvalues are added, it is working. Real.
Here is a code for matrix columns, and it is shows me on the form the description.
You must have to add of course validvalues to show the description (as in the description). This sample
is shows you the ship types of orders. You also can use userdatasources....
Sub ComboDesc()
        Dim oForm As SAPbouiCOM.Form = m_SBO_Application.Forms.Add("TEST_MTX")
        oForm.Visible = True
        Dim oitem As SAPbouiCOM.Item = oForm.Items.Add("MTX", SAPbouiCOM.BoFormItemTypes.it_MATRIX)
        With oitem
            .Top = 5
            .Left = 5
            .Width = oForm.Width - 15
            .Height = oForm.Height - 15
            .AffectsFormMode = False
        End With
        Dim oMatrix As SAPbouiCOM.Matrix = oitem.Specific
        Dim oColumns As SAPbouiCOM.Columns = oMatrix.Columns
        Dim oDBDataSource As DBDataSource = oForm.DataSources.DBDataSources.Add("ORDR")
        Dim oColumn As SAPbouiCOM.Column = oColumns.Add("#", SAPbouiCOM.BoFormItemTypes.it_EDIT)
        With oColumn
            .TitleObject.Caption = "#"
            .Description = .TitleObject.Caption
            .Width = 30
            .DataBind.SetBound(True, "ORDR", "DocEntry")
            .Editable = False
        End With
        oColumn = oColumns.Add("COL1", SAPbouiCOM.BoFormItemTypes.it_COMBO_BOX)
        With oColumn
            .Width = 80
            .TitleObject.Caption = "ShipType"
            .Description = .TitleObject.Caption
            .Editable = False
            .DataBind.SetBound(True, "ORDR", "TrnspCode")
            .DisplayDesc = True
            .Visible = True
        End With
        Dim vv As SAPbouiCOM.ValidValues = oColumn.ValidValues
        Dim ors As SAPbobsCOM.Recordset = ocmp.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
        ors.DoQuery("select * from OSHP")
        Do While Not (ors.EoF)
            vv.Add(ors.Fields.Item(0).Value, Left(ors.Fields.Item(1).Value, 30))
            ors.MoveNext()
        Loop
        oDBDataSource.Query()
        oMatrix.LoadFromDataSource()
    End Sub
Regards
J.

Battery: unusually problem?

I'm afraid to change my battery , because I'm not sure that it has not been ruined by some other malfunction of my macbook pro.
In fact, the moi cycle counter tells me that the battery had only 30 complete cycles, and I have never been able to calibrate the battery because the computer turned off for lack of power rather than go to sleep .
The service said that instead everything is in order , but it was I stupid not to insist even more than I insisted.
Meanwhile, under apple care , my mac has been replaced the logic board for the famous defect in the graphics card.
However, the defect has remained unchanged to this day that the battery after only two and a half years of life in which he has never held more than twenty minutes.
I don't know what can be, and especially if it is wise to change the battery.
Currently my battery is down to zero , and my processor is running at half power (sigh) .
I do not want it ruined again to a hardware problem I do not know .
What can I do ?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Unusual problem w/ Enya's watermark CD--

Similar Messages

Maybe you are looking for