Unusual shutoff on Macbook Pro 2011 while sleeping
My 13" Macbook Pro 2011 will be fully charged and will go to sleep normally. However, I will go about my day and 4 hours later I won't be able to turn my computer on unless I have it connected to the power adapter. Then when I turn on my computer, the battery life percentage is 0%. Why is this?
Isn't the battery supposed to last at least a day or so while in sleep mode?
Your hard drive will last a while longer if you keep the moving to the minimum when it is on, but on short term there aren't any problems. I have never even tried not to move my MacBook when the drive's spinning, and it still works fine after 2 years.
Of course, if you would have an SSD, move the thing as much as you want. Since they don't move on themselves, they can be moved freely.
Similar Messages
-
Macbook Pro 2011 don't recognize Monitor AOC e224eFw, hence not displaying correct resolution
Two days ago after i put my Macbook Pro 2011 to sleep with the Mini DisplayPort connected (always do the same) stopped identifying my External Monitor, AOC e224eFw showing it as "standard VGA" so i have no the right screen resolutions. I've tried to PRAM reset, SMC reset and not working.
Must say worked 2 days ago. Tried my old trusty Macbook Black 1st Gen and it's working OK with that one.
Any idea why?
Any help will be highly appretiate.
Regards!I made a mistake, Monitor Model is e2243Fw.
Regards! -
Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?
Unfortunately do not know the operating system since I never updated anything and I can't get in to it.
Thanks for your assistance.If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data. -
i'm using a macbook pro 2011 15",while i was charging it,i accidentally switched off the power supply while it is half way charging,will the battery get damaged if charging got interupted and switched on and off?
you are welcome
-
So a few weeks ago my MacBook Pro 2011 started having charging problems. I would use it normally. Then plug it in to charge anywhere between 5-20 percent like I've been doing for the past year that I've had it (since August 2011). Anyway, what happens now is that it charges but extremely slowly - at least 4 hours to fully charge as opposed to the 1 1/2 to 2 hours that it used to take. Also, it seems to be draining a lot quicker than it used to while only browsing the internet. Furthermore, while charging, the battery meter goes from the percent its charged to to "not charging" back and forth. What's going on? Is there a problem with my battery, my computer, or the magsafe charger? [please refer to the pictures below to get a better understanding of my problem - these pictures were taken over a 2 hour time period - a time period that usually is enough to charge my computer] - if you'll notice, in the first two pictures, the percent barely went up by 10 in a half hour period:
Here are my Mac power stats:
Battery Information:
Model Information:
Serial Number:-----------
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 406
Hardware Revision: 2
Cell Revision: 158
Charge Information:
Charge Remaining (mAh): 6156
Fully Charged: Yes
Charging: No
Full Charge Capacity (mAh): 6393
Health Information:
Cycle Count: 343
Condition: Normal
Battery Installed: Yes
Amperage (mA): -1607
Voltage (mV): 12182
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 25
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 15
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
PrioritizeNetworkReachabilityOverSleep: 0
RestartAfterKernelPanic: 157680000
Standby Delay: 4200
Standby Enabled: 0
Battery Power:
System Sleep Timer (Minutes): 20
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 15
Wake on AC Change: No
Wake on Clamshell Open: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Reduce Brightness: Yes
RestartAfterKernelPanic: 157680000
Standby Delay: 4200
Standby Enabled: 0
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: No
Charging: No
Does anyone have any idea what the problem may be?
Thank you,
macstrtry doing a SMC RESET and see if that sorts it out for you.
if doesn't work - better take it to Apple and have them look at it before something else goes wrong...
good luck - hope you get it sorted out.. -
Macbook Pro 2011 running very slowly after upgrading to Mavericks
I am in deep trouble with my wife so any help would be gratefully accepted.
Shortly after Mavericks became available I upgraded my wife's Macbook Pro 2011 to use the new OS version. Ever since then, the Macbook has been running noticeably slowly. In particular, Mail is almost unusuable taking minutes to open and showing long delays while moving around messages, folders, etc. Excel and Word are also much slower, Safari is slow, in fact just about everything is grinding.
Any ideas on what can I can do to improve things and apease my unhappy wife would be much appreciated.
I have attached the Etrecheck output FYI
Thanks
Andrew
Hardware Information:
MacBook Pro (13-inch, Late 2011)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 0:5:25
Disk Information:
Hitachi HTS545050B9A302 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (361.28 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
User Launch Agents:
[loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
Dropbox
Internet Plug-ins:
LogMeInSafari64: Version: 1.0.730 3rd-Party support link
Google Earth Web Plug-in: Version: 6.0 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.3.6 3rd-Party support link
Silverlight: Version: 4.0.50401.0 3rd-Party support link
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
LogMeIn: Version: 1.0.730 3rd-Party support link
Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
LogMeInSafari32: Version: 1.0.730 3rd-Party support link
iPhotoPhotocast: Version: 7.0
JavaAppletPlugin: Version: 14.8.0 - SDK 10.9 Outdated! Update
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
SuperDuper!: Version: 2.7.1 - SDK 10.4 3rd-Party support link
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Time Machine:
Time Machine not configured!
Top Processes by CPU:
7% Safari
6% Dropbox
5% WindowServer
3% hidd
2% com.apple.WebKit.Networking
Top Processes by Memory:
119 MB com.apple.IconServicesAgent
106 MB Safari
94 MB Finder
94 MB Dropbox
94 MB Mail
Virtual Memory Information:
1.26 GB Free RAM
1.44 GB Active RAM
311 MB Inactive RAM
1014 MB Wired RAM
251 MB Page-ins
0 B Page-outsLaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
I am going to NYC in a week and I'm wondering if there is a store where I can buy a new trackpad for my Macbook Pro 2011 unibody. I would also like to buy the tools i need to replace it myself. I can't find anything when I search the interwebz.
The problem is that when the machine is closed, it goes to sleep, and in sleep mode, all that goes on is that a bare trickle of power is used to keep the contents of RAM alive. Networking is definitely not active while asleep.
Now, regarding ds store's solution, that's a fairly bad idea. If the machine is just sitting at your desk, you don't need to close it, or if you feel a need to close it you can use Kappy's solution. (Although, it should be noted that apps like InsomniaX and Caffeine do not, as far as I know, keep a machine awake when the lid is shut.) If you're worried about passersby seeing your screen, just activate the screen saver instead. You could even require a password to dismiss the screen saver for added security.
On the other hand, if the machine is being transported, keeping the lid open and the machine running is not a good idea. The sudden motion sensor ought to protect your hard drive against damage caused by moving the machine around... if it's working properly, and I'd rather not depend on an "if" to prevent hardware damage to the machine. Plus, if it's in a bag and you've forced it to stay running, it could overheat due to lack of ventillation.
So, long story short: if you're transporting it, close it and deal with logging back in to the network, and if it's on your desk, don't bother closing it. -
Macbook Pro 2011 clamshell mode broken by latest software update?
After installing the latest MacBook Pro software update and EFI update through Software Update in the evening May 4, I am unable to enter clamshell mode any more. It used to work before. After waking up in the clamshell mode, the machine promptly goes back to sleep. On subsequent attempts to wake up the system, the laptop itself appears to wake up (at least the sleep light stops blinking) but the display does not even wake up. I can still work with external dsisplay with the lid open but this is highly annoying. I have reset the PRAM with no effect. The machine is a 2011 MBP, 15" inch, 2.2 GHz quad i7. Keyboard and mouse are wireless Microsoft desktop but the problem is also present with wired peripherals.
Does anyone else see this problem after installing the latest patch?Okay, I'll add my frustration here as well.
I've had this problem too, and more noticable since the 1.4 update.
I posted a thread similar to this here.
But I'll just copy over what my main problem was...
Whenever I plug my computer into my Cinema Display (with the computer closed) it won't wake up fully. The status light will come on, any external hard drives will spin up, but the display won't turn on and the computer will go back to sleep.
I have to restart the computer manually to get it to work normally, and if I disconnect it while it's between the sleep and wake mode and try to open it, the backlight will come on but the screen will remain black, causing me to have to force restart it.
This is in addition to my first problem with the backlit keyboard not coming on automatically after sleep, which was temporarily fixed by resetting the SMC, but it goes back to the problem after a week or so.
What could be causing either of these problems? Could it have something to do with BootCamp since I have it installed, or is there a defect?
I would bring it back to Apple, but there's a small dent in the front right corner, and I'm afraid they would deny any problem I have.
I took my MacBook Pro (2011, i7 2.2, 17") into the Apple Store on Monday, and after about an hour of attempting to replicate the problem with a different monitor, there was only one time where there was any sort of problem.
The employee told me to see if there will be a fix, or otherwise they will replace the logic board for me.
One thing I'd like to add as a note...
It seems that the problem is more prominent when I have my computer with everything on it as usual. As in, before I took it to the Apple Store I performed a clean install of OS X, and that may be related to how bad the problem is, any opinions?
I had attempted at reinstalling OS X from a Time Machine Backup, but the problems continued shortly after completetion. In addition to this, I clean installed OS X, and manually reloaded my applications and media, hoping that the problem had stemmed from some kind of broken file system that could be repaired by a new install.
But no matter how I do it, the problem comes back despite the method. It is really something I want fixed, as I pretty much only use it in clamshell mode when home... -
Macbook Pro Randomly Enters Sleep Mode For A Few Seconds
Hi All,
My Macbook Pro has had this problem since a few months after I purchased it. While working or playing the laptop will randomly go into what seems like sleep mode. The screen turns off, I hear the hard drive stop and then a couple seconds later it starts back up on its own. Any Internet connection I had disconnects, but other than that it starts up as normal.
The problem comes and goes and doesn't seem to be consistent with anything that I'm aware of. Sometimes it happens once, then doesn't happen for days. Often it will happen several times in a row over the course of an hour.
I've called support and brought the laptop to the genius bar where they ran several tests, but were unable to figure anything out. Research online has shown similar issues with other users, but no solutions. The laptop is not stacked on anything magnetic, the issue occurs when running hot or cold and whether I'm on battery power or plugged in.
Any help would be greatly appreciated. If this can't be resolved is it something I can bring to apple and get a replacement under my year warranty?
Specs are below:
Refurbished 17" Macbook Pro
Processor Name: Intel Core 2 Duo
Processor Speed: 2.66 GHz
*Console Log from one pretty bad incident today:*
Aug 13 12:55:52 Ben-Shepards-MacBook-Pro coconutBattery[1857]: * NSTimer ignoring exception '* -[NSCFArray objectAtIndex:]: index (2) beyond bounds (1)' that raised during firing of timer with target 0x405e00 and selector 'batteryDataThreadTimer:'
Aug 13 12:58:10: --- last message repeated 8 times ---
Aug 13 12:58:32 Ben-Shepards-MacBook-Pro loginwindow[31]: loginwindow SleepWakeCallback WILL sleep
Aug 13 12:58:34 Ben-Shepards-MacBook-Pro configd[13]: network configuration changed.
Aug 13 12:58:37 Ben-Shepards-MacBook-Pro loginwindow[31]: loginwindow SleepWakeCallback will power on, Currenttime:8/13/2010 12:58:37.034 PM - Waketime:8/13/2010 12:58:35.400 PM = Deltatime:1.633561075
Aug 13 12:58:39 Ben-Shepards-MacBook-Pro configd[13]: Sleep: Success - AC 96 - Clamshell Sleep
Aug 13 12:58:39 Ben-Shepards-MacBook-Pro configd[13]: Wake: Success - AC 96 - EC LID0
Aug 13 12:58:39 Ben-Shepards-MacBook-Pro configd[13]: Hibernate Statistics
Aug 13 12:58:40 Ben-Shepards-MacBook-Pro configd[13]: network configuration changed.
Aug 13 12:58:58 Ben-Shepards-MacBook-Pro ntpd[18]: time reset +0.908918 s
Aug 13 12:59:08 Ben-Shepards-MacBook-Pro loginwindow[31]: no spins reported for this wake
Aug 13 13:00:48 Ben-Shepards-MacBook-Pro loginwindow[31]: loginwindow SleepWakeCallback WILL sleep
Aug 13 13:00:50 Ben-Shepards-MacBook-Pro configd[13]: network configuration changed.
Aug 13 13:00:53 Ben-Shepards-MacBook-Pro loginwindow[31]: loginwindow SleepWakeCallback will power on, Currenttime:8/13/2010 1:00:53.031 PM - Waketime:8/13/2010 1:00:51.420 PM = Deltatime:1.611223936
Aug 13 13:00:53 Ben-Shepards-MacBook-Pro configd[13]: PMConnection mDNSResponder com.apple.powermanagement.applicationresponse.slowresponse 128 ms
Aug 13 13:00:53 Ben-Shepards-MacBook-Pro configd[13]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 128 ms
Aug 13 13:00:53 Ben-Shepards-MacBook-Pro configd[13]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 130 ms
Aug 13 13:00:55 Ben-Shepards-MacBook-Pro configd[13]: Sleep: Success - AC 97 - Clamshell Sleep
Aug 13 13:00:55 Ben-Shepards-MacBook-Pro configd[13]: Wake: Success - AC 97 - EC LID0
Aug 13 13:00:55 Ben-Shepards-MacBook-Pro configd[13]: Hibernate Statistics
Aug 13 13:00:56 Ben-Shepards-MacBook-Pro configd[13]: network configuration changed.
Aug 13 13:01:07 Ben-Shepards-MacBook-Pro ntpd[18]: time reset +0.836731 s
Aug 13 13:01:24 Ben-Shepards-MacBook-Pro loginwindow[31]: no spins reported for this wake
Aug 13 13:04:59 Ben-Shepards-MacBook-Pro loginwindow[31]: loginwindow SleepWakeCallback WILL sleep
Aug 13 13:05:02 Ben-Shepards-MacBook-Pro configd[13]: network configuration changed.
Aug 13 13:05:05 Ben-Shepards-MacBook-Pro loginwindow[31]: loginwindow SleepWakeCallback will power on, Currenttime:8/13/2010 1:05:05.026 PM - Waketime:8/13/2010 1:05:03.410 PM = Deltatime:1.616448998
Aug 13 13:05:07 Ben-Shepards-MacBook-Pro configd[13]: Sleep: Success - AC 98 - Clamshell Sleep
Aug 13 13:05:07 Ben-Shepards-MacBook-Pro configd[13]: Wake: Success - AC 98 - EC LID0
Aug 13 13:05:07 Ben-Shepards-MacBook-Pro configd[13]: Hibernate Statistics
Aug 13 13:05:08 Ben-Shepards-MacBook-Pro configd[13]: network configuration changed.
Aug 13 13:05:10 Ben-Shepards-MacBook-Pro ntpd[18]: bind() fd 26, family 30, port 123, scope 5, addr fe80::223:6cff:fe96:9643, in6is_addrmulticast=0 flags=0x11 fails: Can't assign requested address
Aug 13 13:05:10 Ben-Shepards-MacBook-Pro ntpd[18]: unable to create socket on en1 (51) for fe80::223:6cff:fe96:9643#123
Aug 13 13:05:17 Ben-Shepards-MacBook-Pro ntpd[18]: time reset +0.413090 s
Aug 13 13:05:36 Ben-Shepards-MacBook-Pro loginwindow[31]: no spins reported for this wake
Aug 13 13:05:39 Ben-Shepards-MacBook-Pro loginwindow[31]: loginwindow SleepWakeCallback WILL sleep
Aug 13 13:05:39 Ben-Shepards-MacBook-Pro mDNSResponder[30]: DeregisterInterface: Frequent transitions for interface en1 (FE80:0000:0000:0000:0223:6CFF:FE96:9643)
Aug 13 13:05:42 Ben-Shepards-MacBook-Pro configd[13]: network configuration changed.
Aug 13 13:05:44 Ben-Shepards-MacBook-Pro loginwindow[31]: loginwindow SleepWakeCallback will power on, Currenttime:8/13/2010 1:05:44.024 PM - Waketime:8/13/2010 1:05:42.410 PM = Deltatime:1.614192009
Aug 13 13:05:46 Ben-Shepards-MacBook-Pro configd[13]: Sleep: Success - AC 98 - Clamshell Sleep
Aug 13 13:05:46 Ben-Shepards-MacBook-Pro configd[13]: Wake: Success - AC 98 - EC LID0
Aug 13 13:05:46 Ben-Shepards-MacBook-Pro configd[13]: Hibernate Statistics
Aug 13 13:05:47 Ben-Shepards-MacBook-Pro configd[13]: network configuration changed.
Aug 13 13:05:47 Ben-Shepards-MacBook-Pro mDNSResponder[30]: RegisterInterface: Frequent transitions for interface en1 (192.168.1.103)
Aug 13 13:05:48 Ben-Shepards-MacBook-Pro ntpd[18]: bind() fd 26, family 30, port 123, scope 5, addr fe80::223:6cff:fe96:9643, in6is_addrmulticast=0 flags=0x11 fails: Can't assign requested address
Aug 13 13:05:48 Ben-Shepards-MacBook-Pro ntpd[18]: unable to create socket on en1 (54) for fe80::223:6cff:fe96:9643#123
Aug 13 13:05:51 Ben-Shepards-MacBook-Pro mDNSResponder[30]: RegisterInterface: Frequent transitions for interface en1 (FE80:0000:0000:0000:0223:6CFF:FE96:9643)
Aug 13 13:05:59 Ben-Shepards-MacBook-Pro ntpd[18]: time reset +1.150003 s
Aug 13 13:06:04 Ben-Shepards-MacBook-Pro loginwindow[31]: loginwindow SleepWakeCallback WILL sleep
Aug 13 13:06:04 Ben-Shepards-MacBook-Pro mDNSResponder[30]: DeregisterInterface: Frequent transitions for interface en1 (FE80:0000:0000:0000:0223:6CFF:FE96:9643)
Aug 13 13:06:05 Ben-Shepards-MacBook-Pro configd[13]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 225 ms
Aug 13 13:06:05 Ben-Shepards-MacBook-Pro configd[13]: PMConnection mDNSResponder com.apple.powermanagement.applicationresponse.slowresponse 225 ms
Aug 13 13:06:05 Ben-Shepards-MacBook-Pro configd[13]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 225 ms
Aug 13 13:06:07 Ben-Shepards-MacBook-Pro configd[13]: network configuration changed.
Aug 13 13:06:11 Ben-Shepards-MacBook-Pro loginwindow[31]: loginwindow SleepWakeCallback will power on, Currenttime:8/13/2010 1:06:11.026 PM - Waketime:8/13/2010 1:06:09.410 PM = Deltatime:1.616049945
Aug 13 13:06:13 Ben-Shepards-MacBook-Pro configd[13]: Sleep: Success - AC 98 - Clamshell Sleep
Aug 13 13:06:13 Ben-Shepards-MacBook-Pro configd[13]: Wake: Success - AC 98 - EC LID0
Aug 13 13:06:13 Ben-Shepards-MacBook-Pro configd[13]: Hibernate Statistics
Aug 13 13:06:14 Ben-Shepards-MacBook-Pro configd[13]: network configuration changed.
Aug 13 13:06:14 Ben-Shepards-MacBook-Pro mDNSResponder[30]: RegisterInterface: Frequent transitions for interface en1 (192.168.1.103)
Aug 13 13:06:15 Ben-Shepards-MacBook-Pro ntpd[18]: bind() fd 26, family 30, port 123, scope 5, addr fe80::223:6cff:fe96:9643, in6is_addrmulticast=0 flags=0x11 fails: Can't assign requested address
Aug 13 13:06:15 Ben-Shepards-MacBook-Pro ntpd[18]: unable to create socket on en1 (57) for fe80::223:6cff:fe96:9643#123
Aug 13 13:06:18 Ben-Shepards-MacBook-Pro mDNSResponder[30]: RegisterInterface: Frequent transitions for interface en1 (FE80:0000:0000:0000:0223:6CFF:FE96:9643)
Aug 13 13:06:24 Ben-Shepards-MacBook-Pro ntpd[18]: time reset -0.427840 s
Aug 13 13:06:41 Ben-Shepards-MacBook-Pro loginwindow[31]: no spins reported for this wake
Message was edited by: Shep123I just found this link and have followed the instructions. Here's hoping...
http://discussions.apple.com/thread.jspa?messageID=11716177� -
Macbook Pro 2011 won't turn on (RAM issue?)
(Macbook pro 2011) I had water damage so I sent in to apple for a complete makeover and they pretty much replaced everything. The laptop seemed to be working fine but the issue is that when I put my laptop to sleep / turn off it won't turn back on. I haven't had the time to take my laptop back to the apple store due to projects / travelling. I've found that there is one quick fix, manually resetting the ram by taking the RAM chips out for a second then re-inserting them. The other way is to hold Command+Option+P+R 3 times before reboot and that'll work temporarily for a day maybe. I plan on taking it to the apple store in a day or so if the problem doesn't resolve itself. Do you guys have any suggestions?
Thanks,Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Macbook pro 2011 early cannot find right resolution for external display and keeps flickering
I have a macbook pro 2011 early running 10.9, and a LG FLATRON W2242T external screen. Also, I have a VGA to miniport from Apple and a VGA to HDMI, plus a HDMI to miniport(from Apple). By just connect with VGA to miniport to my MBP, it just flickers few times and stops detecting. But by connect VGA to HDMI converter and HDMI to miniport to my MBP, it keeps flickering, a non-stop flickering. The external screen always shows no signal. However, if I connect my MBP to my TV through HDMI to miniport, it works fine. But connecting the VGA port to my TV, it gets the same problem. I have tried clear my PRAM many times, and it gets the same result. Does anyone have the same problem? Thanks
Macbook Pro 15" Early 2011 external display won't work as it used while Snow Leopard, I hate you Lion so far. I cannot even Go Back!
Did you bother to backup or clone your SL installation before dumping it? -
I am having problems with my macbook pro 2011 version. First of my display will not go to sleep, it will stay on screensaver. I told the sreen to go to sleep in 5 mins and i set hot corners to sleep display. When i go to the corner to make the screen go off, it wont. the sleep light on the front of the macbook pro will turn on idicating that its in screen sleep mode and the keyboard lights turn off but the screen wont. The second problem is that when i close the lid to my mackbook pro and it goes to sleep. Then when you open it and it comes out of sleep, you will be using it for 5 secs and then it goes back to sleep and then move the mouse and it comes back on.
Try resetting your SMC.
-
Display issue - My macbook pro 2011 detects my display but does not display an image
Hi, I am having a problem connecting my MacBook Pro (2011) to my HP 2511x display. I used the display all morning with my mbp connected and closed. When I came back, after the computer went to sleep, I cannot get any image on the display. The computer detects the display but no image appears.
I have tried-
Installing the latest firmware and software updates
restarting both the computer and monitor
trying all of the possible display arrangements and settings for resolution and refresh rates
Also I am connected using a minidisplay to DVI adaptor in the thunderbolt port.
Any and all suggestions appreciated.
thanks.Hello Aminetti,
It sounds like your computer goes to sleep, and will not wake up, so you must manually restart your computer. I recommend the troubleshooting in the following article:
OS X: When your Mac doesn't sleep or wake
http://support.apple.com/kb/TS5357
Reset SMC
Reset NVRAM/PRAM
Test with external devices disconnected
Try Safe Mode
Try another user account
Thank you for using Apple Support Communities.
All the best,
Sterling -
2011 Macbook pro on snow leapord wont go to sleep through the energy saver options. Even when I set it to sleep in 1 minute it still wont. The display will sleep but the computer itself will not. I tried closing all apps and it still doesnt sleep as it is supposed to.
Looks like I'm having similar problems to the user whose MacBook Pro wouldn't sleep with the lid open. I followed your terminal instructions and my readout looks like this:
MacBookPro:~ macbookpro$ kextstat -kl | awk ' !/apple/ { print $6 $7 } '
com.Apogee.driver.DuetFWOverideDriver(1.4.4)
com.rogueamoeba.HermesAudio(3.0.0)
com.Cycling74.driver.Soundflower(1.5.1)
com.logmein.hamachi(1.0)
com.sophos.kext.sav(7.3.0)
com.vmware.kext.vmx86(3.1.3)
com.vmware.kext.vmci(3.1.3)
com.vmware.kext.vmioplug(3.1.3)
com.vmware.kext.vmnet(3.1.3)
MacBookPro:~ macbookpro$
MacBookPro:~ macbookpro$
Last login: Mon Nov 14 11:07:45 on console
MacBookPro:~ macbookpro$ kextstat -kl | awk ' !/apple/ { print $6 $7 } '
com.Apogee.driver.DuetFWOverideDriver(1.4.4)
com.rogueamoeba.HermesAudio(3.0.0)
com.logmein.hamachi(1.0)
com.sophos.kext.sav(7.3.0)
com.vmware.kext.vmx86(3.1.3)
com.vmware.kext.vmci(3.1.3)
com.vmware.kext.vmioplug(3.1.3)
com.vmware.kext.vmnet(3.1.3)
MacBookPro:~ macbookpro$
MacBookPro:~ macbookpro$ sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
Password:
com.vmware.launchd.vmware
com.sophos.notification
com.sophos.intercheck
com.sophos.autoupdate
com.rogueamoeba.hermes
com.microsoft.office.licensing.helper
com.logmein.logmeinserver
com.logmein.hamachi
com.leapfrog.connect.shell
com.duetDaemon.plist
com.bombich.ccc
com.bjango.istatlocaldaemon
com.aladdin.aksusbd
com.adobe.versioncueCS4
com.adobe.SwitchBoard
MacBookPro:~ macbookpro$ launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
net.culater.SIMBL.Agent
com.logmein.logmeinguiagent
com.logmein.logmeingui
com.bjango.istatlocal
com.adobe.CS5ServiceManager
com.adobe.CS4ServiceManager
ws.agile.1PasswordAgent
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109
com.adobe.ARM.930da3ce175de4e82bd3cdf1dd8571f74bd3b6a7236bc94bfc00f6e9
com.adobe.AAM.Scheduler-1.0
MacBookPro:~ macbookpro$
MacBookPro:~ macbookpro$ ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Sta}* 2> /dev/null
/Library/Components:
/Library/Extensions:
ham.kext
/Library/Frameworks:
.DS_Store
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AdobeACE.framework
AdobeAGM.framework
AdobeARE.framework
AdobeAXE8SharedExpat.framework
AdobeBIB.framework
AdobeBIBUtils.framework
AdobeCoolType.framework
AdobeJP2K.framework
AdobePDFL.framework
AdobeXMP.framework
AudioMixEngine.framework
EFI
ES1000.framework
ExtensisFontManagement.framework
ExtensisPluginInterface.framework
ExtensisPlugins.framework
Firebird.framework
GlimsAdditions.framework
NyxAudioAnalysis.framework
PluginManager.framework
SAVI.framework
SUMScanKit.framework
StuffIt.framework
StuffItCore.framework
XSKey.framework
Xerces.framework
harmony.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
Flash Player.plugin
JavaAppletPlugin.plugin
LogMeIn.plugin
LogMeInSafari32.plugin
LogMeInSafari64.plugin
OfficeLiveBrowserPlugin.plugin
PDF Browser Plugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
VeetleBroadcast-0.9.16
VeetleTVCore-0.9.16
VeetleTVPlayer-0.9.16
flashplayer.xpt
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
/Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.CS4ServiceManager.plist
com.adobe.CS5ServiceManager.plist
com.bjango.istatlocal.plist
com.logmein.logmeingui.plist
com.logmein.logmeinguiagent.plist
net.culater.SIMBL.Agent.plist
/Library/LaunchDaemons:
com.DuetDaemon.plist
com.adobe.SwitchBoard.plist
com.adobe.versioncueCS4.plist
com.aladdin.aksusbd.plist
com.apple.aelwriter.plist
com.apple.remotepairtool.plist
com.bjango.istatlocaldaemon.plist
com.bombich.ccc.plist
com.leapfrog.connect.shell.plist
com.logmein.hamachi.plist
com.logmein.logmeinserver.plist
com.microsoft.office.licensing.helper.plist
com.rogueamoeba.hermes.plist
com.sophos.autoupdate.plist
com.sophos.intercheck.plist
com.sophos.notification.plist
com.vmware.launchd.vmware.plist
de.jinx.SmartSleepDaemon.plist
/Library/PreferencePanes:
Flash Player.prefPane
Growl.prefPane
Perian.prefPane
SmartSleep.prefPane
Xmarks.prefPane
sfcore-prefpane.prefPane
/Library/PrivilegedHelperTools:
com.bombich.ccc
com.leapfrog.connect.shell
com.microsoft.office.licensing.helper
/Library/QuickLook:
GBQLGenerator.qlgenerator
VMware Fusion QuickLook.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AC3MovieImport.component
AppleAVCIntraCodec.component
AppleHDVCodec.component
AppleIntermediateCodec.component
AppleMPEG2Codec.component
AppleProResCodec.component
DVCPROHDCodec.component
FCP Uncompressed 422.component
Google Camera Adapter 0.component
Google Camera Adapter 1.component
IMXCodec.component
Perian.component
SoundboothScoreCodec.component
/Library/ScriptingAdditions:
Adobe Unit Types.osax
SIMBL.osax
/Library/StartupItems:
.DS_Store
ES1000Service
Firebird
ProTec6
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Extensis:
Suitcase Fusion
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
EvernoteSafariClipperPlugin.webplugin
GlimsAddition.notplugin
WebEx.plugin
Library/LaunchAgents:
.DS_Store
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.930da3ce175de4e82bd3cdf1dd8571f74bd3b6a7236bc94bfc00f6e9.plist
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109.plist
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.DE0F5CBD-555C-43B4-8D08-71D 91D41F97D.plist
ws.agile.1PasswordAgent.plist
Library/PreferencePanes:
Library/QuickLook:
BetterZipQL.qlgenerator
Library/ScriptingAdditions:
MacBookPro:~ macbookpro$
i'm sure it's something silly that I didn't uninstall correctly but if you could look at it i would really really really appreciate it. Thanks -
Can mac os leopard be installed in macbook pro 2011?
Hi,
I need help. Is possible to install mac os leopard in a macbook pro 2011, 2.2 GHz quad core i7 to create a dual boots? I tried and the software disc got stuck and nothing came out on the screen. Good thing i got the disc out. thank for your help.I think you can.
Boot from the install cd by holding down C while booting, from there you disk utility to create a second partion and install OS X Leopard on the new partition.
Tyler
Maybe you are looking for
-
SAP BW report through CRM portal
Hi, I have a requirement where we need to open SAP BW query/web template through CRM7.0 portal. Could you please tell me all the necessary configuration steps that we need to do in CRM system for carrying out this task? Thanks, Rahul
-
Change font size of an table with javascript
Hello! i am new to developing in javascript as well as to indesign. i have to make a few changes to an existing script. in a user dialouge i get the font size in which the imported table should be. but how can i change the font size of an table??? pl
-
Please help, I am baffled. For the past 18 months I have used itunes with no problem. I have the My Music folder with the iTunes folder in my external hard drive. When I have the drive on itunes has had no problem seeing it, using it and updating my
-
Basic questions about recovery/repair preparation
When I got my machine, over two years ago, I made repair disks on DVD's per Toshiba's instructions. Now, with my nightly backups, I have it make a system disk image on a NAS device. If I were to have a large failure and need to restore my system, i
-
Hi Experts! I'm wondering about an elegant solution for my problem. I have a top level VI that contains subpanel, in order to call plugin VI interfaces into. The plugin vi itself has own state machine (JKI Queued State Machine) and called by VI Serve