Unvisible tables in the operating mode (MAC)
hi everyone
a customer did install the contribute cs4 for macintosh.
i know contribute only for windows.
is it possible that he doesn't see the tables in the
operating mode?
i can't overtake his screen to see it.
thanks
can you rephrase the question?
are they trying edit a page that has html tables in it, but
they don't see
the table cells in ccontribute?
url address to the page they are trying to edit?
is the html syntax in the page correct?
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/
Similar Messages
-
Manual Switch over the operation modes
Hi,
What's is purpose of RZ03(Manual Switch Over the Operations Modes)? Where extactly useful?
Regards
Basis AdminHi,
Operation Modes are the best way to change the amount of processes in the system, Administrators usually prefer more dialog processes during the day to deal with the users requests and more batch processes during the night to deal with all the system jobs, reports, archiving, etc.. The manual switch is used to change the Operation mode instantly to deal with a special demand, like heavy reporting, special month end jobs, testing, etc...
Hope this help!
Juan
Please reward with points if helpful -
I use the operating system Mac os x 10.10.2 and would like me like to purchase Adobe Photoshop Elements 13 am with but not sure because is specified in the system requirement only os x 10.9. Can you help me?
Yes, it works. Download the trial and see for yourself. Adobe never updates the system requirements after any version is released, so that is what was available last Sept. when PSE 13 was released.
-
when upgrading the operating system mac os x 10.5 to 10.6, should i do a back of my computer or if i do it directly i would loss all my music, videos, documents, etc?
Hi ocio,
First of all, you should always do a backup of your computer before doing an upgrade - always.
Things can go wrong, and if they do, you will be out of luck without a backup.
Upgrading should not affect your music, videos, documents, files in general. But don't take any chances in case things go awry....back it all up first!
Cheers,
GB -
Unable to change the operating mode in informatica admin tool.
hi
i have installed Informatica 8.6.0
my repository service is running . and i have also created the integration service but its not running, the reason as i fount out in various blogs is that my repository is iin exclusive mode .
so , i tried to change it to normal mode . but the problem is as i select normal in the drop-down list in general properties operating mode option and click ok , nothing's happening a and the page error is coming as shown below:
Can't move focus to the control because it is invisible ,not enabled or of a type that does not accept the focus
Is this an error of internet explorer ??? i am using IE 7.or are there any options that i need to enable???
what should i do in this case???
plz help !!!!
Edited by: Nikhil.S on Jun 8, 2011 3:37 AM
Edited by: Nikhil.S on Jun 8, 2011 3:41 AMI got the same error and after I tested with firefox and everything.. I found out the issue (in my case):
- Under Database properties, The value for "ConnectString" property contains a space at the end.
-Example "host.oracle.com "
- Solution: I remove the space at the end , save it, and Now I can modify the operatingmode to Exclusive
Edited by: hcamacho on Jun 24, 2011 1:53 PM -
The switch of operating mode does not occur
Hello
I wander what could be the reason teh system does not switch to operating mode "night". It is an database server.
The profiles are consistent. However the switch does not occursHi,
Did you define the timetable for the operation modes ?
Regards,
Olivier -
Urg:"At operation mode" in background job scheduling
Hi Folks,
I am doing background job for a program. Pls tell me the usage of "At operation mode" in detail.....If any coding is required pls also let me the way to do....Hi
It s nothing but the NORMAL operation Mode or NIGHT operation mode
So you can define the relative operation moade and accordingly can set the time to execute the job as per the settings.
You can enter any name for the operation mode, but ensure that it is meaningful and that it makes the task of the operation mode clear.
<b>Reward points for useful Answers</b>
Regards
Anji -
Logs for 'Operating mode' change in mirroring
Logs for 'Operating mode' change in mirroring
Hi Everyone,
Is there any log,that shows when the Operating mode of a database involved in mirroring(SQL SERVER 2008 R2) has been changed from asynchronous to synchrous(or vise versa).
Regards,
Aspet
A.GTry looking into trace log files
DECLARE @filename VARCHAR(100), @filenum int
SELECT @filename = CAST(value AS VARCHAR(100))
FROM fn_trace_getinfo(DEFAULT)
WHERE property = 2
AND traceid = 1
AND value IS NOT NULL
SELECT @filename
SELECT @filename = substring(@filename, 0, charindex('_', @filename)+1) + convert(varchar, (convert(int, substring(left(@filename, len(@filename)-4), charindex('_', @filename)+1, len(@filename)))-4)) + '.trc'
SELECT @filename
SELECT gt.EventClass,
te.Name AS EventName,
gt.TEXTData,
gt.NTUserName,
gt.NTDomainName,
gt.HostName,
gt.ApplicationName,
gt.LoginName,
gt.SPID,
gt.StartTime,
gt.EndTime,
gt.ObjectName,
gt.DatabaseName,
gt.FileName
FROM [fn_trace_gettable](@fileName, DEFAULT) gt
JOIN sys.trace_events te ON gt.EventClass = te.trace_event_id
WHERE EventClass = 116
AND TEXTData LIKE '%Alter
database%'
ORDER BY StartTime;
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Blog:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance -
Can't switch operation mode after backup offline
Hello:
Every sunday system stop at 9:30 a.m to backup offline at 16:00p.m
System start at 23:00 p.m.
Operation mode
Day : 7:00 a.m 22:00 p.m
Night 22:00 p.m 7:00 a.m
This monday dont switch operation mode night to day and disp+work get
busy .
Nobody could access the system until it is manually reset.
Can anybody help us?
Regards.You have following options.
1 .try to adjust the operation mode as example given below.
Add an additional operation mode Except for the duration of backup .
Example:
7:00 a.m. - 7:00 p.m. DAY (normal operation mode)
7:00 p.m. - 7:00 a.m. NIGHT (normal operation mode)
3:00 a.m. - 4:00 a.m. EXCEPT (Backup operation mode)
4:00 a.m. - 7:00 a.m. NIGHT (exception operation mode)
2.See if you get and error message in sm21 after offline backup.
3.delete the operation mode and create new .
4.try to change the timings of day and night operation mode.
what is your OS and DB and Rel?
hope it helps.
Amit -
Profile consistency check when operation mode change
If the number of work processes in the profiles is changed, the system can no longer switch operation modes until after a restart of the instance. It's therefore necessary to adjust the configuration of the operation modes after a change to the profiles.
In above paragraph, I don't understand why the system can not switch mode if the number of wp in profile is changed? Does system will compare wp number in profile with currently running wp number before the operation mode switch? Please advise.
Thanks.
JamesYes, I can understand it, when the number of work processes is changed, we need redefine the operation mode.
But I am confused this sentence "If the number of work processes in the profiles is changed, the system can no longer switch operation modes until after a restart of the instance. "
After the number of work processes in profile is changed, I think it will not impact instance immediately until restart the instance. According to this sentence, it seems when I change the parameter in profile, it impacts the instance immediately and the system can not switch operation mode right now if we don't restart the instance. Is it reasonable? And I think the operation mode still need redefine even if we restart the instance, since scenario in Ralph's description. Is my thought right?
Thanks so much.
James -
Cloning the operating system only.
Hello,
If I want just to clone the operating system (Mac OS 10.4.10) to another disk for booting and cloning, which part of the existing folders do I have to clone? I know that I have to clone "System", "Library", "Application". What else?
Thanks.
RobertYou can't really selectively clone your operating system.
What you can do is clone everything, add a second user account to your clone, and delete the user account with all the data on it in the clone.
Or you can just use the operating system installation disks to install just the operating system on the external hard drive. Mac OS X will install onto most Firewire external hard drives.
Here's my FAQ* on cloning and backing up:
http://www.macmaps.com/backup.html
- * Links to my page may give me compensation. -
What are Operation Modes?
I would just like to have deeper meaning with regards to Operation Modes. What are operation modes? Does this basically means that we can allocate additional resources (in terms of work process) to a specific operation? For instance, we need additional background work processes at night, we could simply switch the operation mode that is defined to add several background work processes for night? Is that it?
Are there any subtraction or addition of work processes? For instance, from only existing 5 background processes, we can make it to 10 background processes by activating or switching the operation mode?
Or is it simply reallocation of work processes to give way to the more priority in-need work processes? If it is simply reallocation? From what work process are we reallocating from? Does it signify that we can allocate several dialog work proceses and make it background processes? From 10 dialog process and 3 background process, we'll allocate 5 from dialog process to make the background process into 8?
Or is it simply reallocation of the current setting of the work processes? For instance, you have a total of 10 background processes defined in the profile parameter, then you set 2 bacground processes for day and 8 work processes for night. Is that it?
Which is the correct notion? Kindly clarify. Thanks.Hi,
Operations modes just change the role (from DIA to BTC for exemple) of some work processes.
It is not possible to change the total number of work processes.
If necessary, It is possible to switch manually operation modes with RZ03.
On our systems we have 3 operation modes : Day, Night and Exceptional.
Day and Night are switched automatically with the time.
Exceptional mode is switched on manually very rarely when there is an "exceptional" need...
One trick to know : you need at least one UPD our UP2 process on a DI to be able to change the number of these processes vi operation modes.
Regards,
Olivier -
Hi,
I want to create custom module for my compact rio embedded chassis.And my question is how I can select between SPI and parallel interface in the operation mode? Do I have to write a logical low or high to a special pin to select the SPI template??
Regards,
bluemoonFor development of custom modules you need the cRIO Module Development Kit.
http://sine.ni.com/nips/cds/view/p/lang/de/nid/14548
Along with the Kit comes the documentation which includes handling of the interface.
Regards
Stephan A.
NI -
Hello,
I have increased the number of work processes in the instance profile and restarted the instance. we have an operation mode (24hours) in place, which is not being reflected with the newly added work processes. I tried to edit it but couldn't succeed. Can some one help me how to edit (Adding new work processes) the operation mode with newly added work processes.
Next question is once the operation mode is place, when I switch the work process, how should I force the change. Ex: changed 10 back ground and 5 dialog to 10 dialog and 5 back ground. This is in a 24 hours of single operation mode.
Quick help is very much appreciated.
Thanks,
PreetiHi Preeti,
please do this way,
1)first go to RZ04
2)choose create
3)enter name and title description of OP mode
4)give the short Description of mode(Day & Night)
5)save
6)so the Op Mode created
7)same the above steps to Night Mode also
8)define wp process destribution
9)save
How to define WP
1)RZ04
2)define
3)choose instence/opmodes
4)choose select
5)click background field
6)save
7)the change new apper
8)save
9)repeat for all the other OP modes
10)save
i hope it will be some helpfull to you.
In real time once you set the opmodes you do not change means no need.if may be the load balence is high on wp that time you can change the wp.suppose workload is high on DIA but no load in Back, that time you can interchange the wp.
mainly we do opmodes in Night time only.once you set the opmodes almost you could not change because application servers are also in set in perfect manner
regards,
reddy -
Information About Default Operating Mode
Hello,
Someone can help me and give me a good documentation that explain what do the SETBASED mode, ROWBASED, ROWBASED (target only), with schemas it will be exellent.
I know a little the differences between but i will to learn that in detail.
I ask that because we have to make programs that are the most optimize (time of execution) and the Operating Mode is very important.When a mapping runs in a set-based mode, the rows are processed as a single dataset, with a single SQL statement that is either completed successfully for all the rows or fails if there is a problem with even one row. This is generally the fastest way of processing data.
When a mapping runs in a row-based mode, the data can be extracted from the source one at a time, processed and inserted in the target. If there is a problem with some rows, this is logged and the processing continues.
Needless to say, the set based operating mode is faster in all cases, while the row based operating mode gives more control to the user, both in terms of logging row-by-row processing information as well as in terms of control over the management of incorrect data.
The default operating mode is the set based, fail over to row based mode in which Warehouse builder will attempt to use the better-performing set-based operating mode, but will fall back to the more granular row-based mode if data errors are encountered. This mode allows the user to get the speed of set based processing but when an unexpected error occurs it allows you to revert to row based mode.
The operating modes Row Based (Target Only) and Set Based Fail over to Row based (Target Only) are a compromise between the set based and the row based modes. The âtarget onlyâ modes will use a cursor to rapidly extract all the data from the source, but will then use a row-based mode to insert data into the target, where errors are more likely to occur. These modes should be used if there is a need to use the fast, set based mode to extract and transform the data as well as a need to extensively monitor the data errors.
I am currently writing a paper on OWB performance, and if you are interested, drop me an e-mail ([email protected]) and I will send you a draft version of it.
Regards:
Igor
Maybe you are looking for
-
Hey All, I have this string "Straw? No, too stupid a fad, I put soot on warts" I am going to test is this string is a palindrome. Thi string is, but I run it through my program it says it is not because of the "?" and ",". How to take that string run
-
Hi, For what functionality session is used in ATG, i.e what is the use of session in ATG. and how is it achieved in ATG???? Components : session scoped Repository : Transient properties Session cookies: ???? Regards
-
So when I try to update or download an app it says I don't have enough storage. I don't know how to use iCloud and stuff soo what do I do? Help! I don't wanna delete any pics either.
-
CCM2.0 Config in NW2004s (PI7.0) u0096 XI Error
Ive run into the following error in SRM after running program BBP_CCM_TRANSFER_CATALOG. Can someone please tell me what it means and hopefully how to correct it? <?xml version="1.0" encoding="UTF-8" standalone="yes" ?> - <!-- Call Integration Server
-
Indesign CS5 (7.0.4) Crashes without any error message win xp
Hi All, My indesign quits unexpectedly while i'm doing simple find and replace var myDoc = app.activeDocument; app.findGrepPreferences.findWhat = "~I|~i|~k|~h|~-"; app.changeGrepPreferences.changeTo = ""; myDoc.changeGrep(); Not for all file for some