Unwanted automatic time change for no reason

I've got a 6021 that changes time by one or two hours for no apparent reason whether it's in automatic time adjust or not.
The firmware version is 4.10 092005; has it been improved since then?
CK

Yes, current version is 04.90. A firmware upgrade should sort out the problem for you
Best Regards
Dave

Similar Messages

I have synced my ipod many times, but for some reason it will no longer sync the apps, and says there are app installed that can not be determined. What should I do?

I have synced my ipod many times, but for some reason it will no longer sync the apps, and says there are apps installed that can not be determined. What should I do?

See these previous discussions:
not determined
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities

Time change for daylight savings and Alarms not working correctly

we have 3 iPhones in our house. 2 were set to auto time change for daylight saving and one wasn't. 1 did the auto time change with out an issue and all alarms worked ok. The other 2 have had issues with not been able to set the alarms ie set alarm for 0630 and it goes off at 0530 even though the time is set correctly. The 1 that was set to autotime worked fine until I switch auto time off, now the alarms on this one wont work either. well they work but just at the wrong time. The 3rd phone will allow alarms to be set, but the alarm will go off an hour earlier and this phone will not allow the alarm to be set for 0630 at all.
Has anyone had this issue and resolved it. It makes getting up for shift work a right pain..

Read here:
http://www.appleinsider.com/articles/10/10/11/applesays_ios_software_update_to_fix_pesky_alarm_clockbug.html

Automatic Time Change

Hi there,
winter time is back in Europe... however, my iPhone 3G iOS4, although setting "automatic time change" is on, did not change to winter time. As soon as I switch off "automatic time change" it shows the correct (changed) winter time. What might the problem be?
Thanks
Christian

Thanks, but when inserting the SIM into another cell phone it works 100 %. Putting it into a second iPhone and it does not work. So seems to be an iPhone issue. Even after restaring any of my iPhones it takes the old time.

My wifi network is 802.11n but there are times changing for 802.11g, and have to restart ... after the update for Mountain Lion

My wifi network is 802.11n but there are times changing for 802.11g, and have to restart ... after the update for Mountain Lion... Help!!!
Several problems with Mountain Lion, APP STORE (login/logout error), WIFI(802.11n for 802.11g), MAIL (horrible)... Apple, what is happening?

Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

Photoshop CC--Automatic settings change for DPI and color?

Photoshop CC-- How do I change settings so every time I open a new doc-- it will automatically be 300 dpi and CMYK. I do not want to do a preset with a certain size.

Thanks Kurt!
For some reason--"file new" kept defaulting to the 72 RGB with copying images from illustrator into photoshop.
The command worked and now comes up like I wanted.

WRE54G Settings changing for no reason

Hey there,
I have successfully connected my WRE54G to my Netgear DG834G and everything works fine, then for no reason a few hours later, the link light is orange. When i check, I find that the ssid for my WRE54G has changed to what must be the ssid of someone else nearby. At no time before the change do i power anything off for any settings to be lost.
Is it possible that maybe the WRE54G is getting a stronger signal from elsewhere? I don't see how that is possible as there can't be anyone closer than my own router.
Any advise would be great.
Oh and i have v3 WRE54G running ver 3.????? firmware.
Cheers
Tony

hi..it seems that somebody is getting into the network and changing the settings on the range expander...because i don't think that the wireless ssid on the range expander can change automatically..and can get the ssid of your neighbour's network....
so , ensure that u enable WPA security on the router and the range expander..

Automatic Time Confirmation for an operation in a Maintenance Order (IW41)

Hello,
We have a requirement to do automatic time confirmation (while saving the order) on an operation when the user selects "DONE" standard text key on Operation line item. Is there a user exit or BADI available in Plant Maintenance that can be used for Automatic time confirmation?
I went through some of the user exist/BADI in PM and didn't find anything for automatic time confirmation. The only thing that I found useful was user exit CONFPM03 (which allows to carry our own checks once and operation is selected for confirmation).
Appreciate your responses. Thanks

Hi ,
Normally thru confirmation we enter actual hrs worked in IW41 .. but if you do not want to run that tcode then not sure of any BADI but i would suggest you to create a Z Programme which runs as a batch job at some 30min everyday . The Z Programme checks all the PM orders of particular order type which are with released status and then gets into operations and checks for standard text and if its value is DONE then calls programme SAPLCORU - IW41 Programme .. you can suitably put a variant for that batch job .. plz check the option with ABAPer ..
regrds
pushpa

Daylight Saving Time Changes for 2007

Hello Friends
Sun's J2SE 1.4.2_11 has taekn care of the new Daylight Saving Time changes in accordance with The Energy Policy Act of 2005. Does anyone know if bea has incorporated same changes to their Jrockit, if so then starting which version.
http://java.sun.com/developer/technicalArticles/Intl/USDST/
Thanks for the answers in advance.
Regards
Rajeev Bhogal

Hello All
We currently compile and run our application with Jrockit 1.4.2_04 (build 1.4.2_04-b05), if we change to minor version 11 for 1.4.2 should we recompile the application. I would think that DST related binaries would only be called at run time not compile time, however I am far from being a compiler expert. Can any learned friend shed some light.
Henrik what do you think.
Regards and Thanks
Rajeev Bhogal

DST time change for global companies

We are curious to hear how other companies are handling the DST time changes in spring and fall especially if they are global and operating in multiple time zones.
Do you set servers to UTC/GMT?
And set SAP systems to UTC?
And let users set their local time zone?
Would that mean we don't have to worry about the fall and spring time change any more because UTC doesn't change? (That would be nice!)
TIA,
Margie

Hi Volker,
these "right setting" makes me unconfident.
note 7417 tells me that that better shut down the system because the majority of the applications are not certified for a continued operation
note 102088 tells me how to minimize the downtime to one hour... these is the procedure we were using the last years
note 950114 tells me how to avoid the double hour by using zdate/DSTswitch_contloctime (=on you need not to shut down the system)
note 391658 tells me "If you are converting from summer time to winter time, shut down all SAP instances before the scheduled conversion (for example, at 01:30) and wait at least an hour before you restart them."
Your experience to let the systems run was quite good, but it is dissapoints me that SAP does not give a distinct statement about the DST. As mentioned befor, it is not practicable to shut down the SAP system in a global environment.
cu, Christian

JDK DST Time Change for 2007

I just got an e-mail from Sun about the DST issue for 2007.
Is Adobe going to come up with a fix for this or should we download
the JDK directly from Sun? We are currently running JDK 1.4.2_04.
Some sort of communication about this issue would be appreciated.
U.S. Daylight Saving Time Changes in 2007
The United States has planned a change to its DST observance
beginning in 2007. The Energy Policy Act of 2005 mandates that DST
will start on the second Sunday in March and end on the first
Sunday in November. In 2007, the start and stop dates will be March
11 and November 4, respectively. These dates are different from
previous DST start and stop dates. In 2006, the dates were the
first Sunday in April (April 2, 2006) and the last Sunday in
October (October 29, 2006).
If you are concerned about application failures that may
result from these DST changes, you should update your Java Runtime
Environment. The following Java platform versions have correct time
rules to handle the DST changes that will affect U.S. time zones in
2007. You can download any of the following Java platform versions
to resolve this DST issue:
JDK 6 Project (beta)
J2SE 5.0 Update 6 or later
J2SE 1.4.2_11 or later

Ok, I have figured out what the issue is here. I'm posting
this in the hopes
that Adobe will modify their document, "How to upgrade the
JVM that ships with
ColdFusion" at
http://www.adobe.com/go/2d547983.
There are several steps that
are omited or vague, so here is some additional information
that will help you
in the upgrade process.
JVM 1.5.x is NOT supported for ColdFusion. The link
specified for the upgrade
process points to the Java SE page which currently displays
1.5.x as the
current version. Instead go directly to the 1.4.2x page at
http://java.sun.com/j2se/1.4.2/download.html
to get the correct version of the
JVM.
It should also be noted that the default installation for
the JVM points to
C:\Program Files\Java\JDK<version>, this default
directory must be changed
because the java.config file does NOT allow for white space
in the java.home
argument. When installing the JVM you should choose the
?Custom? install and
install to C:\Java or a directory structure that does not
contain spaces. It
may be helpful to rename the JRE directory under Jrun4 and
install to that
directory directly if you don?t want the java files outside
of the Jrun
directory. This is important because if there is white space
in the directory
structure, ColdFusion will not start up and return a ?Service
fails to start
with Service-Specific Error 2? message when starting the
service.
Once you have installed the JVM it is necessary to create a
directory in the
JVM folder called ?Server?. There is already a directory in
the folder called
?Client?. Once you create the Server directory, copy the
contents of the Client
directory into the new directory called Server; this is
completely omitted from
the document and is important to the process for upgrading
the JVM.
Using the above information combined with the document
provided by Adobe, I
was able to install the JVM 1.4.2_11 and ColdFusion started
up using it.
Hopefully these suggestions will help others in the future
when they need to
upgrade the JVM.
Thanks!

Overriding automatic time changes on iMovie

I am trying to get my iMovie images and music to change together. iMovie will often override the time I input to match the two together. Unfortunately it is sometimes wrong.
For example, I want an image to change at about 1.35 seconds. When I put in 1.3, imovie changes it to 1.2. If I put in 1.4, imovie changes it to 1.5.
It "thinks" that is the right setting, so it is changing it for me. I bought a mac because I was tired of micros&*ft "thinking" it knew what was best for me.
How do I override the auto time change feature and put in the times I want?
Thanks.

I want an image to change at about 1.35 seconds. When I put in 1.3, imovie changes it to 1.2. If I put in 1.4, imovie changes it to 1.5.
The image duration has to be entered in the Inspector as seconds and frames, not as a decimal. So, for example, if you are using the NTSC format each second is comprised of 30 frames (in reality, 29.97 frames). So if you want the image to be one and a half seconds you enter it as 1:15, which is one second and 15 frames. You can enter the time up to a maximum of x number of seconds plus 29 frames, such as 1:29 - you can't enter, say, 3:35 as that will actually represent 4 seconds and 5 frames and should be entered as 4:05 (note that a colon separates the numbers, not a decimal point).
Likewise with PAL projects which have 25 frames per second. For one and a half seconds you would enter 1:12 or 1:13 - not 1.5
It may help if you go to iMovie (in the menu) and click on Preferences. In the General tab in the window that opens, check (tick) the box against "Display time as HH:MM:SS:Frames". I think it's in the same location in iMovie '09 - I'm working in iMovie '11.
John

Iphoto: unwanted date/time change after import

Two problems:
First Problem: In October, 2012, scanned a photo into my MacMini in JPEG format. Creation date 10.12.2012 , Modified date 10.12.2012. This is OK.
This is an old family Christmas photo, so I use "touch -t" command through the Terminal application to change Creation and Modified dates to 12.25.1957 at 2PM (1400.00 hours). Use Finder/Get Info to check date of JPEG file and confirm change of date and time.
Then, import JPEG file into iPhoto: iPhoto shows date of JPEG file as 12.25.1957, but time is now 3:34.02PM (1534.02 hours). Use File/View in Finder to look at iPhoto file and discover that date and time are changed to 12/31/1969 at 7:00 PM (1900.00 hours). What's going on here?
Second Problem: Received a JPEG file by email and moved it to the Desktop.   Creation date and Modifed date of the file are the date and time they were downloaded from email onto my MacMini, which is today: 1/30/2012 at 11:30AM.   Use "touch -t" command through Terminal application to change Creation and Modified dates and times to 10/20/2012 at 6PM (which is when the picture was actually taken). Comfirm change through use of Finder/Get Info capability.
Import JPEG file into iPhoto and time gets changed to 7:34PM (date stays 10/20/2012).   Look at File/Reveal in Finder and the dates are still the date and time of the download from email onto my computer. What gives?
Iphoto version is 9.4.2. All system software up-to-date.

That command is the adjust time/date command - not the batch change command
Adjust T/D takes a group of selected photos and applies a constant delta to them thereby correcting for camera setting errors or time zone issues
Also note that this is a user to user support forum not a path to Apple - it is a great plce for questions about how iPhoto works - it is an extremely poor place to make requests for changes since there is no one here who can do that.
LN

Automatic power on for no reason

ok, this is the second time in about 2 months or maybe alittle more that this thing powers on..last night about 11:00 pm it auto powered on without me programing it to do so...last time it did it was about the same time i believe, i remember since the thing woke me up...anyone here got a reason for it? thanks

My computer has boot itself up a few times aswell... about 3 AM usually.
and very mysteriously started up a game of solitaire and left cookie crumbs on my keyboard hehee...

I have a clock VI that I attached to several other VIs to keep track of running times but for some reason the clock stops at 24 minutes. Why?

I got this VI form a member of the forum. He used it for the same reason so I figured that it worked. I can't seem to fine the reason that it stops at 24 minutes. Could it been something on my computer stopping it. But I have run this VI on several PCs and got the same results.
Attachments:
CLOCK.vi ‏40 KB

I am not sure what the VI is supposed to be doing. It seems like it will keep track of time it takes to execute x (=3600xNumeric+1) numbers of iterations. How long it takes depends on the system. If the VI runs slower on a particular system, it will take longer to execute the same number of loop iterations than on another station. For example, on my machine it took 6 min to execute the VI with Numeric=1. Another factor is the wait time set in the loop to =100. I don't see anywhere this taken into the consideration.
I am sending you another VI that counts the time from the start of execution until the Stop button is pressed. Of course, you can replace the Stop button with a condition that suites your needs.
Hope this helps.
Zvezdana S.
Attachments:
Timer.llb ‏51 KB

Unwanted automatic time change for no reason

Similar Messages

Maybe you are looking for