Unwanted blank pages appearing in 7.0.5 (but working in 9)

I'm trying to create a form which has a front page and three optional additional sections that appear when the respective buttons are clicked. I need the form to work in Reader 7.0.5
I've got it working just fine in LiveCycle 8.2 and Acrobat 9, but when it is opened in Reader 7.0.5 three blank pages appear after the front page, and as the optional sections are opened, they replace/fill-up these blank pages.
Any help would be most gratefully received!
Details:
The form is targeted to 7.0.5 and saved as a dynamic XML form.
I am not seeing any warnings, but when switching to Preview PDF, I do see the following under the log:
"Invalid version: the current version of the XFA template model exceeds the capability of Acrobat/Adobe Reader 7.0.5"
The buttons to reveal the page have the following formcalc scripts:
Form.Top.OnePager.FrontPage.MoreInfoButton.Hide::click - (FormCalc, client)
MoreInformation.presence = "hidden"
Hide.presence = "hidden"
Show.presence = "visible"
Form.Top.OnePager.FrontPage.MoreInfoButton.Hide::initialize - (FormCalc, client)
MoreInformation.presence = "hidden"
Hide.presence = "hidden"
Show.presence = "visible"
etc

Could be caused by many reasons.
Is the paragraph format set to skip a line the first time it is printed (SPACE AFTER setting)?
Is the data causing it to overflow across the line?
Is there a line feed in the actual SAPscript (like a "/" paragraph format)?

Similar Messages

Unwanted blank pages appearing in copy function

The new iWork 08 book says if you want to add pages to an already existing document then click on the thumbnail of the one you want to add and copy, and then click on the thumbnail of main one you want to add TO and paste. This ALWAYS brings up a blank page in between them that can not be deleted?????????? Pretty useless. Any ideas?

I assume that both of your documents are in fine shape before you try to combine them. No extraneous break commands, blank sheets, etc., both documents fitting well within their margin boundaries.
I'm having success, but I'm not doing exactly what you say you are. I copy a page from the thumbnail in the Source Document's Pages Pane. I then Paste into the blank lower portion of the Destination Document's Pages Pane, not directly onto a Thumbnail there.
When I do this, a Section Break is added at the end of the Destination Document's original content, so the added content starts on a new page. Deleting the Section Break moves the new content up adjacent to the original Destination Document's content.
You might give this method a try and see if it works for you.
Jerry

The sharepoint my company uses no longer works properly with firefox, only a blank page appears, is there a fix for this?

Hello,
We currently use Microsoft SharePoint Server 2010 and it doesn't seem to be compatible with the latest version of Firefox (33). When I try to open a sharepoint page, only a blank page appears. I do not get any error messages. The sharepoint works with other browsers, such as Chrome.
Is there a work around available so that we may continue to use Firefox?
Thank you!

Do either of these typical troubleshooting steps make any difference?
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Command+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
"3-bar" menu button (or Firefox menu) > Preferences > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* (menu bar) Tools > Page Info > Security > "View Cookies"
* click the globe or padlock to the left of the address in the address bar > More Information > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?
In case one of your extensions is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference?

Unwanted blank pages inserted when creating pdf from scanner

Hello, when creating a pdf from a document scanned via Adobe Acrobat X Pro, the program inserts an unwanted blank page in between each page being scanned. So, if scanning 50 pages, we get 100, etc. How do we remediate this problem? We have worked with the default settings, to no avail. We're using a Fujitsu fi-5530c2 scanner. We would appreciate any input to help resolve this issue! Thanks Mark

Hi,
you can automaticaly fix previously made documents using the Preflight tool.

What causes blank pages appearing suddenly in an autoflowed-text document?

CS5.5, english version.
The complete book was built-up and all master pages were applied . When reopening the file, several blank pages appeared at two places in the document. The text flow was not interrupted, but seamed «hidden» under a non-existing white layer. The software showed «Master page applied», but the pages were blank, imposible to select any object or to place a new text frame. It was also impossible to reapply the master page (the pages were still blank after). We could not access the hidden part of text, even if it was obviously still present, and we had no choice but rebuild a new document.
We don't know what caused this very disturbing bug, and we would avoid it to reappear again! If someone knows a trick, you're welcome!
Version : Indesign CS 5.5, en anglais.
Le livre était monté en entier avec pages maîtresses appliquées. Lors d'une réouverture du fichier, plusieurs pages vides sont apparues, à deux endroits dans le document. Le texte n'était pas interrompu, mais semblait «caché» sous un calque blanc. Le logiciel affichait l'icône de la page maîtresse appliquée, mais la page demeurait vide. Impossible de sélectionner une boîte de texte ni de parvenir à réappliquer la page maîtresse. Nous n'avons pas réussi à accéder à la portion de texte «cachée» sous ces pages vides, bien qu'elle n'ait de toute évidence pas été perdue.
Nous n'avons pas trouvé d'autre solution que de recommencer le montage à zéro à partir d'un nouveau document, mais nous ne savons pas ce qui a causé ce problème, ni comment éviter qu'il survienne à nouveau.
Si quelqu'un a déjà rencontré cette anomalie et peut m'informer, bienvenue!

I'm afraid I don't have any good news for you, though I was able to get the text to reappear by deleting the blank pages and inserting new ones, then rethreading. Youy could do this, but I suspect it is a short-term fix that won't last a day and more important, that output will fail.
ID seems to think the frames on the blank pages are lines with astronomically long lengths and they seem to be sheared as well. Needless to say that seems to be some sort of corruption in the file. The reason that I don't have good news is that I've been completely unable to export anything useful for repair out of the file and reimport it-- neither .idml or tagged text. In all cases I get an error message that the either the file does not exist, it is in use or I don't have permission. I know the files exist -- I can open the text file in a text editor, and I can see the components of the .idml file if I change the extension to .zip, but I can't convince any version of ID to access either of them.
I looked through the file history and noticed that this file began life as a CS4 file that was converted to CS5.5 in August of 2011. I think that's the source of the problem. From time to time we get reports of unexplainable glitches or files that will not output, or just refuse to open at some point, even though they were fine hours earlier, and quite often it turns out that these are legacy files that were directly updated in a newer version. Because of this I now recommend that all legacy files that are to be converted be exported to .inx or .idml from the original version, then that exported file should be opened in the new version.
Actually I had one more thought, and it seems to have been at least partly successful. As I mentioned, I was able to export the main story to InDesign Tagged Text and open that in a text editor (Notepad in this case, since I'm on PC). I tried saving the file from notepad with a new name and lo and behold I can now import it into a new file or use it to replace the text in the original. I tried the replacement, and exporting another .idml. but that still fails to reopen, so the corruption is not in the text of the main story. A .idml file export from a new .indd with the resaved tagged text placed in it also is working.
This means you actually have a good shot at rebuilding this file fairly quickly. Export the stories to tagged text, open those in a plain text editor of your choice and resave as plain text, then place them into a new document with the same page dimensions and margins (rebuild the master pages from scratch in the new file). Make a backup copy of the file with just the text, and make sure it is working properly and that you can export to .idml and PDF, then add the images and check again. I think this is going to work, though it may take a few hours.
DON'T overwrite any of the files you have already -- use new names, and do a save As a the end of each session or at any major change point adding a version number to the name so you have a good backup version chain in case something goes wrong again. Good luck.

When I first start up computer and click on Safari, a blank page appears. I am trying to make MY MSN as the opening page. How do I do this? Thanks for any help.

When I first turn on my computer and click Safari, a blank page appears. I use to have MY MSN as the opening page on Safari. Don't know what happened, but how do I restore it back to the way it was? I've tried everything, I know it has to be something easy, but can't figure it out. Thanks for any help.

In Safari goto Preferences > General... Homepage...

Unable to download candy crush on iPad, all restrictions are off but blank page appears when directed to download from internet

Have updated software to latest version, ensured all restrictions are off, can only find guides and cheats in App Store but not the actual game. Have tried to download from internet but get redirected back to App Store where blank page appears and nothing comes up....

I also encountered this problem. I'm afraid I didn't meticulously document my work, but here are the step I took that might be relevant. I downgraded to IE9 and then down to IE8. I tried the
BypassSSLNoCacheCheck and BypassHTTPNoCacheCheck settings in the registry, which didn't work for me. I tried moving the location of the temporary internet files folder by modifying it directly in the registry:
HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Explorer \ User Shell Folders
HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Explorer \ Shell
This didn't work either. While I could see that I had the invisible content.ie5 folder in there, plus the randomly named folders, there was nothing cached in those folders. Cacls.exe showed
that the user had full control, and I could past files into those folders. This seemed to rule out a problem with permissions on the temp ie files folder.
The big clue for me was this thread when someone said that it worked for the administrator account, but not others. While logged in as the affected user, I tried deleting:
HKCU\Software\Microsoft\Internet Explorer (the entire folder, with all its subkeys)
and also: HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings (again, the entire folder, along with all its subkeys).
I tried running IE again, and downloads work again! In the internet control panel, I now see a path listed for the temporary files folder (the path I specified), and the cache is set to 50MB
now instead of being stuck at 0. I haven't tried updating back to IE9 yet.
I suspect that changing the location of the temporary IE files folder was unessecary, and that all that I really needed to do was delete the two regkey folders. IE10 may be adding some setting
there that gets left after uninstalling it that causes IE9 and IE8 to choke. Hopefully this will save someone the trouble of rebuilding profiles.

The App Store indicates that 5 items need to be updated. When I go to the Update page, only a blank page appears and no application logo appears for updating. Would appreciate receiving a solution for this.

The App Store indicates that 5 items need to be updated. When I go to the Update page, only a blank page appears and no application logo appears for updating. Would appreciate receiving a solution for this.
Sridhar

Okay - let's cut to the chase...
If the Menu Bar (File, Edit... Help) shown in my screenshot below is not visible, use CTRL+B to display it. Then click on Help/Check for Updates. If one is available, you will be able to select it at this time.
Note the item at the bottom of the list; About iTunes. Selecting that will show you which version of iTunes you are using.
An alternative method to display the Menu Bar is click on the box in the top left of your iTunes window...

Blank page appearing in ESS

Hi Experts,
We are using ESS and want to display tax details for Thailand for all the employees. But when we open the page it is showing only the blank page. Rest all the services are working fine.
Request to please help.
Shrikant

Hi Shrikant, also check that the resource asociated to the app is pointing to the correct page in Portal (that is compare the 'url of pcd page' property from resource with 'pcd location' property in Portal's page).
Due to some issue during installation in backend, some resources can have blank values in 'url of pcd page' property.
When you see a blank page caused by an error, you can read the Portal's log for the error details. Ask with your Portal guy for open and read the log.
Regards!

Opening a new URL, a blank page appears with 2 messages on the top left and right corner of the window: "Advertise here" and "Skip this ad" and it will not go to the requested site until I push "Skip this ad"

It would be nice to have the possibility to attach a print screen or something to give you a better idea what is happening and how it looks like.
Anyway, what I described above is accurate:
- the address bar shows the link where I wish to go
- but the page loaded is blank with these 2 hyperlink messages ("Advertise here" in the top left corner, and "Skip this ad" in the top right corner).
I would like to emphasize that it does not have to do with the requested URL: it does the same thing with all sites, all the time.

For me is the same, it's yet 6 months.
the blank page apears for the first 20-30 of the day's navigation, then no more.
For example: If I open firefox at 9 a.m., it appears until 9.30 more or less. If i surf the web until mignight, at 00.01 a.m. this page starts bugging me.
I have yust to click on the link "skip this ad" to return to the desired web page.
Using Adblockplus and NoScript plug-ins had sadly no effect.
I've read somewere that the ploblem should be an f**** adware called "directCPV"., and that the solution is toremove an .exe file called Directcpv.exe or somewhat else, but in my pc I haven't found any of those linked to this adware.
I tried a full system scan with an antivirus (McAfee), with Malwarebytes, Ad-Aware, ATF cleaner, Spybot, Exterminate-it but NO RESULTS.
I tried to do this in safe mode too.
No way cleaning the cache, temp files, cookies etc.
finally I tried to uninstall Firefox (cleaning all registry entry too) and reinstall it, but the problem is still there.
The only cure seems to be formatting the HD, but it's very last chance.
If someone have an idea, please post it here.

Blank page appears when condition not met.

Hi,
As a part of my requirement, I am developing XML report template that has first page as "statement of account" and second page as "remittance advice".
Since we require 'remittance advice' in fixed position(for scanning barcodes), we need to have it in separate page. Second page content (remittance advice) will be be produced on certain conditions. When condition is not met it results in blank page.
We have used MS word in-built page break functionality in our template. We have also tried using <?split-by-page-break:?> but this does not work with our condition. It gives no page break and formatting gets messed up.
We are facing same issue in another reports where we need to display 'Remittance advice' on conditional basis.
Did anyone experience such problem? Any help or suggestion to remove the blank page would be greatly appreciated. Thanks.
Regards,
Pratul

Using the page break logicyou provided, word treats it as same page header and I'm unable to place different header for second page here. If I break the link to change header different from previous page and try to give different header in second page this gets reflected in first page as well. So, logically there is no section break here which is required to have different header in MS word. Any idea on this?
Regards,
Pratul.

Unwanted Blank Page When Table At Bottom of First Page

I have an RTF template which has a table with the typical for loop as the row generator and a totals row after that. There are no line breaks after the table, and the table's paragraph is set to single line spacing with 0 pt spacing before and after.
When the table reaches the bottom of the first page, but does NOT go onto the next page, there is a blank page at the end of the report. Any ideas on how to eliminate this?
Thanks in advance,
Kurz

I have an rtf template which is used to print output in pdf format. I have a table which has many rows which displays data for each record. In order to avoid breaking the page in between the rows of a record , i have added an outer table with single row and column and pasted the data table inside it and changed the row property of outer table to 'Allow Rows to Break Across Pages' to unchecked. It works fine only if the first record set length does not exceed a full page. IF the first record expanded to more than one page, it leaves a blank page at the very first and start the record at the second page. Can you please advise how to solve this issue. Its very URGENT please..

If I duplicate a page in pages, it adds an unwanted blank page in between

Can anyone help?
I need to duplicate page 1. If I show the thumbnails view - duplicate page, instead of just adding an identical page 2 - it adds a blank page 2 and then identical page 3. Then on the thumbnail view, both page 1 and 2 have the yellow box round them as if linked. If I try to delete page 2 it deletes page 1 too.
What is going wrong and why is it adding a blank page in between? I've even tried to do it as a Capture Page and add it as a section, but that again adds the blank page.
It is most frustrating!
thanks
Denniknak

Denniknak wrote:
Can anyone help?
I need to duplicate page 1. If I show the thumbnails view - duplicate page, instead of just adding an identical page 2 - it adds a blank page 2 and then identical page 3. Then on the thumbnail view, both page 1 and 2 have the yellow box round them as if linked. If I try to delete page 2 it deletes page 1 too.
What is going wrong and why is it adding a blank page in between? I've even tried to do it as a Capture Page and add it as a section, but that again adds the blank page.
It is most frustrating!
thanks
Denniknak
Denniknak,
The yellow box does indicate a linkage. I shows you that all the pages in the box are in the same Section. Individial pages are shown as icons in the thumbnail pane, but there is nothing you can do with individual pages there. Entire Sections can be Copied, Pasted, Deleted or Duplicated. Not so with individual pages. To delete a Page, delete the content of that page, or isolate the page with Section Breaks and delete the isolated page as a section. To add a page, insert a Page Break, or a pair of them. Or, insert a Section Break or a pair of Section Breaks. I think you get the idea.
Jerry

Unwanted blank page

While working on one of the pages or the Master Page (I'm not sure which), in my document, I inadvertently typed a sequence of keys or clicked with my mouse on an option that some how ads a new page to my document every time I add a new element to the document. By the time I realized what I had done it was too late to hit Undo. So now whenever I add a new element, or copy & paste an existing element I end up with an extra page in the document where that element is placed. If I move the element to where I want it, I can not go back and delete the blank page. Anyone know what I may have done wrong or how I can get LC to stop adding the extra pages (or even delete the blank pages)? Thanks! Daniel

I have the same problem, but the suggested solutions did not work.
I have two master pages -- Portrait and Landscape.
Pages 1-4 of my form uses the portrait master page. Page 5 uses the landscape master page. I am getting a blank, landscape page between pages 4 and 5.
The hierarchy view shows:
form1
master pages
PortraitMaster
content area
LandscapeMaster
content area
(untitled Subform) (Page 1)
(untitled Subform) (Page 2)
(untitled Subform) (Page 3)
(untitled Subform) (Page 4)
(untitled Subform) (Page 5)
But in both Design View and PDF Preview, I get an extra, blank page between pages 4 and 5.
I have tried lots of different settings in the pagination tabs for pages 4 and 5, but can't get that blank page to disappear.
I am a newb, so I could be missing something basic.
Any suggestions would be greatly appreciated. If anyone's willing to take a look at my file I would be greatly appreciative.

Unwanted Blank pages in smartform

Q=> I have created a smartform where i have given the condition for 3rd and 4th pages when the condition does not satisfies it gives blank pages in preview.

Hi,
Check where did you specified the conditions..you might probably specified on the windows.
Use Command to trigger the 3rd and 4th page instead of calling from previous pages. You can put the condition while using Command.

Unwanted blank pages appearing in 7.0.5 (but working in 9)

Similar Messages

Maybe you are looking for