Unwanted change of Start-Monitor

I use 2 Monitors at my Mac Mini (mid 2010)
- at the MiniDisplay-Port with an adapter to DVI is a 24'' MainMonitor (in the Office)
- at the HDMI-Port is a TV (in the Livingroom with a 5m Cable)
Normally the grey Screen with the Apple Logo is at my MainMonitor.
But after some days (this happens regulary!) the MainMonitor will sleep until the Window with the User Account comes up.
If I want to change the Start-Up-Disk, I have to go in the Livingroom, turn on the TV and have to use the bluetooth mouse to change the Disk!
Even the Window with the User Account vanishes sometimes to the TV, which is worse!
The Screensaver ends only if I use my password, but I can't see nothing. And we are two users!
Sometimes we don't know if the Mac hangs or if the Signal is at the TV!
If I put out the HDMI-Cable, the Mini starts as it should.
When I put in the HDMI-Cable, this bug will appear again!
Who knows a method to fix my MainMonitor?

Yesterday I used my old G3 (b/w) System 9!
I connected the Main Monitor withDVI and the TV with VGA
In the ControlPanel, I can rearange the Monitors and the Symbol Bar (as in SnowLeopard) but there was also a button to set the StartUpMonitor!
Is this really gone today?
Is there a a "HDMI first" in the Mini-Firmware?

Similar Messages

How do i change the start up page i have changed in tools but returns to the unwanted page at startup

i changed the start up page in tools / options and when i restart Firefox it returns to the unwanted page
i installed bit comet and winxdvd programs i was browsing some other sites at the time so i am not sure if those programs were the problem or not

See http://kb.mozillazine.org/Preferences_not_saved

How to change Start-Monitor (when 2 available)

Hi there,
I just went up from 7.0 to 8.0
Can anyone please tell me, where the option is on which (of my two monitors) the application starts?
(I know that 7.0 was able to do so - had to fix a long-term issue with support) :-)
Regards,
Marc

Hi wine_snob,
thanks for the quick reply.
My settings:
nVidia Geforce 8600GT
Driver: 195.81 beta WHQL
Left Monitor: Landscape, Samsung P2450 1980x1080
Right Monitor: Pivot, HannsG HW191 900x1440
OS: Windows 7 Ultimate 32-Bit
The application always starts on the right one and thereby stays when put on the other monitor (with resize button on the right upper corner) in the 10:16 ratio AND in the 900x1440 resolution.
This problem already occured back with version 7.0
Back then the support told me to switch "start-monitor" in the Adobe application.
I just can't find that option in version 8.0
Do you have any idea?
(while the light bulb above your head starts up - I'll fumble around in the nVidia Control Panel) :-)
Thanks for your help

[svn:fx-4.x] 15360: Removing a few unwanted changes to the positioning of drag proxy.

Revision: 15360
Revision: 15360
Author:   [email protected]
Date:     2010-04-12 23:23:29 -0700 (Mon, 12 Apr 2010)
Log Message:
Removing a few unwanted changes to the positioning of drag proxy.
QE notes:
Doc notes:
Bugs: FLEXDMV-2365 ( When layoutDirection is 'rtl', image of the chart item which is being dragged is seen away from mouse pointer)
Reviewer:
Tests run: checkintests - PASS
Is noteworthy for integration:
Ticket Links:
    http://bugs.adobe.com/jira/browse/FLEXDMV-2365
Modified Paths:
    flex/sdk/branches/4.x/frameworks/projects/datavisualization/src/mx/charts/chartClasses/Ch artBase.as

Is letterboxing on in your preferences?
Yes - that's checked. I've removed it and started a
new import. It says 19 mins - so I'll follow up when
done.
Done. And - still looks like a letterbox
Am not sure I'm describing it properly.
Here's a capture of the QT window:
http://www.chrissearle.org/stuff/QT.tiff
And here's the iMovie window - two clips - both the same import - one with letterboxing turned on (first clip in clips list) and one turned off (second clip and selected in main part of window)
http://www.chrissearle.org/stuff/iMovieHD.tiff
You can see that the aspect ratio from QT and iMovieHD is different
Mac Mini Mac OS X (10.4.5)

Images Change Colors between monitors while the UI stays the same

Hey! Im having an issue where photoshop changes the colors when I move the window between my monitors, seen here: http://sta.sh/04y5s60vf3j This isnt due to the monitors themselves being different, it actually changes after a few seconds of moving it inbetween the monitors. The left one has been callibrated with a spyder 3 elite which I no longer have access to. I applied the file with windows color management instead of the spyder utility. The second one is new, and it is not callibrated by anything, but instead was done by hand with the built in brightness/contrast/custom RGB settings. Both of them are very close to eachother, enough so for my tastes. but when photoshop changes what the image looks like, it's causing problems. Interestingly enough, when I disable callibration for the monitor on the left, the image does not change colors between monitors, but instead always appears as it does on the right. but then they don't match up and the whole screen looked washed out because it's uncallibrated, so that doesnt do me any good. Another interesting thing to point out, is when this image is saved as a .JPG, and viewed with firefox the image appears exactly like the monitor on the LEFT (which is my main monitor) despite the left monitor being the one that is force changed. does anyone have any suggestions? It also appears that windows photoviewer is behaving the same way, though firefox does not. Meaning when I open an image in all 3 on the left monitor, they look the same, but when opened on the right monitor, windows photo viewer and photoshop both display the image as brighter and redder than firefox does. This is frustrating, because it seems photoshop is changing the image with my callibration on my left monitor to match what it looks like on the web, which it does. but it doesn't do this for the right monitor, or when the left is uncallibrated. Another issue I can see with this is even if the UI is the same shade of gray, the images are different between the monitors because of this change. Does anyone have any suggestions?
- BD

Alright! So I reread through all this, poked at some things on the internet, and I'm going to attempt to summarize what would be a good solution for all this (And it seems, it still won't be perfect, but to get myself into the best environment I can for not messing with images for an hour trying to make them look nice before I post them to the web. I painted something yesterday on the cintiq, popped it over to my laptop screen and it just looked washed out and terrible.)
1. Get a X-rite EODIS3 i1 Display Pro, Callibrate laptop and cintiq. I do have the money to drop on something like this, especially if it's a time saver.
     Things I'm not sure about:
          a. There was a ton of complaints about the software not working when I checked reviews, but also a ton that said everything was great. most of them were mac users though.
          b. I'm not sure if problems would still be posed, even while calibrated, by me having a wide gamut monitor.
          c. I'm a terrible excuse for a human being and I think the colors showing up brighter on the wide gamut screen is pretty (I should just make my images this bright on a normal screen and there won't be any issues. >.>)
2. Set Firefox to color manage (easy enough)
3. Change my photoshop working space to sRGB (since they'll have been calibrated at this point)
3. Accept the fact that most of the people who look at my work will be doing so on a monitor that is almost certainly uncalibrated, and I can't control what they will see on my screen, but I CAN control if the colors are -actually- what I want them to be on any properly calibrated device. which is probably the best way to go anyways.
4. Make paintings, have fun.
Now, you two have been going on about all sorts of interesting things in here, and it seems that calibration issue run much much deeper than I ever thought. Do either of you have recommendations for how I should tweak this list of things to do or other things I can/ should do? I'm not currently a working professional, but if I have anything to say about it, I will be within a few years (I'm going to school for illustration and studying concept design on my own time) so it'd be useful for me to get into good habits now.
- Brendavid

Change in start date of tax depreciation not for posting in mid of year

Hi Experts,
Tax depreciation area is not for posting. The fiscal year is from Jan to Dec. I want to calculate tax depreciation from May 2011 based on Net Book Value of tax depreciation as on 30.04.2011. But once I change the start date of tax depreciation in asset master to 01.05.2011, the system ignores the previous depreciation so I am not getting the NBV of tax depreciation of 30.04.2011.
Is any setting is required to get this. I can not do changes in posting rules since this tax depreciation is not for posting any thing.
The fiscal year 2010 is closed and NBV of tax depreciation as on 31.12.2010 of one asset is 80000, If I change the start date of tax depreciation from 1.1.2011 then system correcly take NBV of 31.12.2010 for further depreciation calculation. But if i change the start date of depreciation in between of year the system is calculating depreciation based on NBV of 31.12.2010 but ignores the tax depreciation from 1.1.2011 to 30.04.2011, which I previously run using AFAB.
Need your assistance to know is it feasible to do this.
Thanks and Regards,
Harshad

Hi Harshad
The behaviour of the system is very much correct, it is designed to behave that way...
One, you should not have changed the dep start date....
two, NBV in SAP is always taken to be NBV @ the start of the year....
The best wayout I can suggest here is, if you are on EhP4 and EA-FIN active
a. Change the Dep Key in the asset... You can maintain Time Dependant Dep Terms in asset master i.e. Dep Key X from Jan-Apr and Dep Key Y from MAy onwards
b. This will however, calculate dep based on NBV at the start of the year, but based on new useful life
c. Considering your eg: The system is posting more depreciation i.e. 5333 instead of 5155.... So, calculate this amount outside the system and post a Manual Write up ABZU inorder to reduce the Dep and increase the NBV
Even if you are on not on EhP4, you can follow the same approach as above.... i.e.
a. Change the Dep Key in asset master.... This will throw up new dep figure, on the basis of New Useful life and NBV at the start of the year
b. Post a write up from ABZU....
No need to do Asset to asset transfer in my opinion
Only diff between EhP4 and Non EhP4 is that the differential depreciation would be lesser if you are on EhP4... i.e. instead of 5333 now, system may throw up depreciation amount of 5666.. So, you may need to post write up of 5666-5155
br, Ajay M

Change in start date of tax depreciation in mid of year

Hi Experts,
Tax depreciation area is not for posting. The fiscal year is from Jan to Dec. I want to calculate tax depreciation from May 2011 based on Net Book Value of tax depreciation as on 30.04.2011. But once I change the start date of tax depreciation in asset master to 01.05.2011, the system ignores the previous depreciation so I am not getting the NBV of tax depreciation of 30.04.2011.
Is any setting is required to get this. I can not do changes in posting rules since this tax depreciation is not for posting any thing.
The fiscal year 2010 is closed and NBV of tax depreciation as on 31.12.2010 of one asset is 80000, If I change the start date of tax depreciation from 1.1.2011 then system correcly take NBV of 31.12.2010 for further depreciation calculation. But if i change the start date of depreciation in between of year the system is calculating depreciation based on NBV of 31.12.2010 but ignores the tax depreciation from 1.1.2011 to 30.04.2011, which I previously run using AFAB.
Need your assistance to know is it feasible to do this.
Thanks and Regards,
Harshad

Hi Harshad
The behaviour of the system is very much correct, it is designed to behave that way...
One, you should not have changed the dep start date....
two, NBV in SAP is always taken to be NBV @ the start of the year....
The best wayout I can suggest here is, if you are on EhP4 and EA-FIN active
a. Change the Dep Key in the asset... You can maintain Time Dependant Dep Terms in asset master i.e. Dep Key X from Jan-Apr and Dep Key Y from MAy onwards
b. This will however, calculate dep based on NBV at the start of the year, but based on new useful life
c. Considering your eg: The system is posting more depreciation i.e. 5333 instead of 5155.... So, calculate this amount outside the system and post a Manual Write up ABZU inorder to reduce the Dep and increase the NBV
Even if you are on not on EhP4, you can follow the same approach as above.... i.e.
a. Change the Dep Key in asset master.... This will throw up new dep figure, on the basis of New Useful life and NBV at the start of the year
b. Post a write up from ABZU....
No need to do Asset to asset transfer in my opinion
Only diff between EhP4 and Non EhP4 is that the differential depreciation would be lesser if you are on EhP4... i.e. instead of 5333 now, system may throw up depreciation amount of 5666.. So, you may need to post write up of 5666-5155
br, Ajay M

I have a mac os x ver. 10.5.8 2x2.8 quad. my start up disk is almost full. can i change my start up disk from the original hard drive to an additional hard drive i added in Bay 4?

i have a mac os x ver. 10.5.8 2x2.8 quad. my start up disk is almost full. can i change my start up disk from the original hard drive to an additional hard drive i added in Bay 4?

Always want to keep the boot drive with more free space than may seem necessary for performance and to function at its best, 30-40% free or even 50% is not excessive.
Ideal is to separate your system from your data.
You should always have bootable backup / clone of your system
Don't use a green drive for system or data though.
When you are done cloning system and/or data, remove the old original and keep as backup.
Then move the system drive to #1 - no matter what you want to reset the default boot volume to where the system is.
Using Cloning as a Backup Strategy
Carbon Copy Cloner 3.4.1
http://www.bombich.com/software/updates/ccc-3.5.html
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
How to relocate system and user data to another drive:
http://support.apple.com/kb/HT4337
By staying with 10.5.8 you are not going to receive security updates, might want to consider 10.6.8.

Color issue with pdf from Indesign. I have a special cmyk mix for a bcard in Indesign. When I export the pdf the cmyk mix has changed Just started today 1.13.15 Running Yosemite 10.10.1 Any help on what to look for would be greatly appreciated.

I have a special cmyk mix for a bcard in Indesign. When I export the pdf the cmyk mix has changed Just started today 1.13.15 Running Yosemite 10.10.1 Any help on what to look for would be greatly appreciated.

Thank you Peter. Someone else must have been on my computer because I do not change the settings. You pointed me in the right direction.
Thanks again.
Patrick

Need a script to change the start time of meetings set by someone else...

Hello,
I have a series of events that someone else created and the start time is off by 1 hour in my timezone. Is there a script available to run and change these times or do I have to delete them and manually create them myself?

What I ended up doing John is just simply deleting the original events from iCal then I went in to Outlook and manually changed the start/stop times of each event then went into the IMAP Calendar folder, clicked on that event and added it to my iCal. Thats sort of the process I use for getting my events to from Exchange to iCal anyway (can't wait for Snow Leopard) but that did the trick for me for these few items that were off. Fortunately I don't expect any changes from the author.
Thanks for responding!
JimN

CO01 - system changes sch.start time given by the user (fwd sched., no cap. check, no shifts defined)

Dear Experts,
I am facing a very strange issue. Whenever I am trying to manually create and schedule a discrete production order in ECC 6.0, with 1-forward scheduling (in CO01 transaction), by giving scheduled start date and time and pressing the "Schedule" button; the system changes the start time given by me (the date remains) and executes the scheduling with that start time.
For example, when I want to produce 12072 PCs, and I give 08:00 as shceduled start time, the system changes it to 15:59, adds the operation times correctly and defines the 'correct' scheduled end date (again, with fwd scheduling type!).
There is some logic on how the system changes the scheduled start time given by me. Below a certain production quantity, the issue doesn't come up, lead time scheduling is carried out, as it is expected. So the problem only occurs, when the order qty exceeds a certain limitation. In that case the order cannot be scheduled to a certain time phrame (between 07:59 and 15:59), so the system changes the scheduled start time given by me (whenever the order falls into the mentioned period). Depending on the order qty the mentioned period (to which the order cannot be scheduled) is changing.
I made the following checks in the system:
production calendar is set correctly, it is not blocking the production
all the applied work centers are available from 00-24 hrs
no shifts has been defined on any of the WCs, production is enabled in 00-24 hrs
there is no other production scheduled on any of the work centers, capacity load is 0% on all of them, as it has been checked in CM03
order scheduling was performed with '1-forward' scheduling type
anyway, capacity check is switched off in the system
formulas on the work centers are all correct, the processing time calculated based on them is also correct (No queue, wait, setup, etc. times are set in the system, we are only using processing times.)
no error messages
As far as I know, in the above case lead time scheduling must be carried out, the system is simply 'not allowed' to change the start date given by me, just add operation times to the start and define the scheduled end date.
Thank you in advance,
T

Jiaul,
please find the screenshots.
1.Mark for Relevant finite scheduling in scheduling or capacity tab - yes
2.Can be used for multiple operation - yes
3.Capacity Planner Group set up - yes
Caetano,
in my case the order scheduled start date is exactly the same as the operation start date. The problem is that this date cannot be manually scheduled to a certain time interval, the system changes the scheduled start date specified by me. (Like there was a "blocked period".)
Thank you,
T

How do you change the start-up screen

Hi, as my nick states, I'm new here. I'm new to Nokia too and I got an 2760 (I know not the latest model) as gift. Since the battery from my old phone is almost ruined, I'm using it. What baffles me - in the manual I can't find how to change the start-up screen (Nokia) or better, how to block it. This was possible with my old one, but with this one?
To make matters even more complex - it used to be a T-Mobile model (I'm no T-Mobile subscriber) and the menu differs even from the (very short) manual...
I'm lost - can anybody help?
Thanks!!
Solved!
Go to Solution.

this cant be disabled ,check out the web for latest user guide
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

How do I change the start date for the week from Monday to Sunday on my iPhone 5?

How do I change the start date for the week on iCal from Monday to Sunday on my iPhone5?

Yes. On my new iPhone 5 the iCal week begins on a Monday not a Sunday and does not give me the option to edit in settings on the phone

How do I change the start up language from French to English??

How do I change the start up language on a new Apple TV2?

My problem was everything was in French and I don't speak/read French so I couldn't even get the country setting or internet password to work. A very helpful technician called me and walked me thru it and now it seems to be working. Thank you.

How to change standard start page of AS Java

Dear experts,
could you please tell me - is it possible to change the start page of the SAP J2EE server (which is shown when you go to the http://<server name>:50+<system number>*100 page -
SAP Help Portal, System information, User Management etc.)?
Is it possible to change it to the customer page?
I thought it is connected with HTTP provider service, but the root directory pointed where
doesn't exists in the server (.../j2ee/docs),
so I don't understand, from what source the standard page is retrieved and shown to the user.
Thanks a lot!
Andrey.

Hello Ventsi,
thanks a lot for clearing of the situation.
In fact we have a question - how to show the static web page which is stored on the J2EE server instead of the standard index.html. It is not an application, but simple html page.
In HTTP provider help we can see the following lines -
Root Directory
The root directory for this host. The installation program does not create the main directory for the HTTP files automatically. It must be created additionally, or the path must be redirected to an existing directory.
Value ../../docs
Start Page
This page is displayed when the browser establishes a connection with the host. The server searches the root directory for a file that appears in the Welcome Files list. The first match found is returned to the client browser.
So does it mean that we have to create docs directory manually and put our file into this directory?
Or it is the wrong approach?
Thanks!
Regards,
Andrey.

Unwanted change of Start-Monitor

Similar Messages

Maybe you are looking for