Unwanted Feathering with Gradient tool

Hello:
Photoshop Elements 12, using the Elliptical Marquee tool to make a selection, I was using the gradient tool to fill the selection.  However, it continues to feather the color outside of the selection.  I don't know how to reset the tool or stop the feathering.  Any help would be greatly appreciated.

You probably just need to set the Feather to 0 px (zero)
Click on the Tool Options at the bottom of the pse 12 window
If you need to reset the tool, click on the area shown in the screenshot below and select Reset Tool

Similar Messages

  • Blur with gradient tool / Lens blur

    Hi everybody,
    I want to make some blur effects like miniature effect or open apperature lens blur.
    Currently I'm using the gradient tool with negative sharpness. But I think in 100% zoom, the effect looks a litte bit like on/off. Or is the visible effect just non-linear??
    Furthermore it would be create to simulate a lense blur effect in the corners. Currently I have to add at minimum 4 gradients, one in each corner. That's no effective
    Otherwise it would be possible to implementate a radial gradient mask additionally to the normal linear gradient. Also a reflected gradient mask, would be useful.
    Lightroom is great!!
    Thanks,
    Leschi

    -51 to -100 sharpness is lens blur.  It's power is limited by the amount of time it takes to calculate this sort of effect - bigger = longer.

  • Problems with gradient tool bar not remaining on object applied in illustrator cc

    Hello,
    when applying a gradient to a rectangle i will get the gradient tool, click on the left half of the object i want it applied to and while holding down drag a line to thew right hand side of the object. the problem the arises when i release the mouse as the gradient bar that has been shown while holding down then disappears. this applies the gradient but the issue is that all gradient editing has to be done on the gradient window as a posed to live on the object slowing the work flow.
    I am not sure what I'm doing wrong but help would be much appreciated.
    Kind regards
    Joseph

    Just for the sake of learning how to use the tool i start with drawing a rectangle then click and drag the gradient tool across the box. i see the gradient line appear but when i release the mouse the gradient line disappears
    i end up witha box with a gradient but all my editing has to be done in the gradient box as shown in this screen shot:
    What I'm wanting to achieve is how the lades hat is edited in this video Working with gradients | Visual Design CS4 | Adobe TV

  • How do I fade all four sides of a photo with gradient tool?

    Recently I made 2 collages by stacking 5 files (one central photo with a smaller one in each corner). I added a layer mask to each of the corner photos and was able to fade/blend the corner photos into the main picture using the gradient tool. Now when I try what I THINK is the same process, I can only fade a SINGLE side of each corner photo!! When I try to fade other edges it UNDOES the side I just faded! I can only fade one side of the photo!  I don't THINK I changed anything since making the first 2 collages. I am slightly panicked because I have 14 more to make in the next few weeks and suddenly I hit a brick wall!  Does anyone know what I am doing wrong?? Thanks!

    A layer mask is a selection  and you can save selections as alpha channels.  Alpha Channel can be combined into new Alpha channels.  So you can build  your layer mask in stages if you want.    Once you have create one of the required five layer mask you can unlink it from the layer content and save it as an Alpha channel named "Image 1" then transform the layer mask to the other four other locations and sizes. Saving alpha channels in each location named "Image 2" "Image 3" "Image 4" and "Image 5" .  You can then delete the layer with the layers mask. For when you save the Background layer with the five Image Alpha channels as a PSD file. You have a collage template that can be easily populated.  You can also add layers over the background layer that can embellish the collages with. For example add a mat  layer with five image areas cut outs. Use the five Image alpha channels loaded as a combined selection then cutting the areas out image areas of a mat  layer. Then add a texture and style to the mat layer.
    A video showing a 5 image collage PSD template  being populates with images Automated via a Photoshop script from my Photo Collage Toolkit for Photoshop. Documentation and Example

  • Problem with Gradient Tool

    I contacted Adobe because I began having difficulty using
    the Gradient Tool in Photoshop CC 2014 which had previously worked properly.  As I explained to technical support when I
    tried to generate a gradient a progress bar would appear, and at first would
    begin to fill rather quickly, but at 75% of completion it would slow to a
    crawl.  Apparently, eventually it would
    complete, as a gradient did appear in my image, but the completion time was probably
    15 or 20 minutes.
    Adobe technical support first had me restart Photoshop and
    not load my plug-ins which they thought were perhaps conflicting with the
    gradient filter.  I followed this
    direction but, after doing so, the problem persisted.
    Then they asked that I restart Photoshop and delete my Preferences.  I was hesitant lose my preferences and asked
    if I could copy and rename the file containing my preferences before deleting
    it.  They directed me to its location,
    but I couldn’t find the file where it should have been located.  So I elected not to follow their suggestion
    of deleting my preferences to see if this would resolve the issue with the
    Gradient tool.

    Which operating system are you using?
    On windows you need to enable Show hidden files and folders in the Tools>Folder Options to see the photoshop cc 2014 preferences folder
    On mac os press the Option key in the Finder Go menu and click on Library to see the user Library
    How big is your image in terms of pixel dimensions?
    (Image>Image Size)

  • Gradient Tool difficulties with the mask and banner, CS4

    Hi everyone,
    I know this is quite basic, but I'm experiencing a mind block.
    I'm trying to make a banner image fade out to the left into a white background (which has text, this is the rest of the banner) losing as little as the image as possible, it has to be done with a mask as I don't want to edit the original image.
    I don't think feathering works
    At the moment I try this, I put a mask over the banner image, the mask is longer to the left than the banner image. But then when I try and apply the gradient tool to the mask it just slaps it on the image itself making it go all white.
    I've been using photoshop for a while now, just my brain isn't working properly today. Any help appreciated. Thanks

    Try this. First make sure your text is on a layer or background and the image that will be transparent is on another layer above the background with the text. If you already have a mask showing in the layer that will be transparent, just right click on it and choose Delete Layer mask. Then create a new one by clicking on the "Add Layer Mask" button at the bottom of the layer's palette (resting mouse on button shows the name). Press the g key on your keyboard to get the Gradient tool, and to make sure it is working as expected right click on its icon in the the tool options' bar that is at the top left under the main menu and choose Reset Tool. Then make sure that the foreground color swatch at the bottom of the Tools palette is black (to ensure that press d key and if necessary x to get that). Next hold Shift and drag from left edge of the image that will be transparent all the way to the right edge. Now you should have the fading transparency, for additional control while at that step press Crtl + L on your keyboard and drag the arrows of the Input levels there to adjust the gradient as you like.
    Hope this helps

  • Gradient tool doesn't work with gradients on strokes?!

    Okay, so one of the new flagship features of Illustrator CS6 is gradients on strokes, but you can't use the Gradient Tool with them? I just get a crosshairs pointer with a "no" sign next to it. What's up with that?? I can see why this wouldn't work with shapeburst mode, but linear and even angular gradients (to set the center point) should be no problem.
    In addition to this, here is another bug I discovered:
    In earlier versions of Illustrator, you were allowed to use the Gradient Tool to adjust the direction of a shape's gradient even when the shape's stroke was in the foreground. Now that Illustrator can apply gradients to strokes, it is understandable that, if a shape has a transparent stroke, Illustrator will prevent you from using the Gradient Tool on the shape if the stroke is in the foreground.
    But the opposite should also be true: if you have a shape with a gradient stroke and a transparent fill, Illustrator should prevent you from using the Gradient Tool if the fill is in the foreground. But it doesn't. Illustrator will happily respond to the new gradient direction, but the gradient of the stroke will not change, and the fill stays transparent.

    Adobe tends to introduce half a feature, then abandon it and never develop it further.
    Or charge for the fix in CS7!
    Couldn't have said it better myself. I get so sick of half-baked "glorious new features" in this program that--as you two state--either never get fleshed out, or require hundreds of dollars spent to get something that feels finished years later--and then start the whole cycle all over again on something else.
    I haven't even been able to order CS6 yet, because Adobe's "upgrade" policy is as convoluted as Illustrator itself. First mistake was buying into the Master Collection collection when it was first offered (something I've increasingly regretted since).
    Like doubtless thousands of others, I did not upgrade to the much-ado-about-nothing half-baked CS5.5 middle version, because it offered next to nothing (and absolutely nothing in regards to Illustrator). So Master Collection CS5 owners are penalized for this a niggling $25 over and above what the same "upgrade" costs those who bought the CS5.5 non-version--but have to jump through the ridiculous, unnecessary hoop of first "upgrading" to the already defunct CS5.5, and then wait for permission from Adobe to "upgrade" from that to CS6.--AND you have to do all this before a couple-week's deadline.
    So I'm sitting here with an utterly useless CS5.5 DVD, which I am dreading to install. I have absolutely no use at all for this version. But I have to install it (and you know how that can go) anyway, because Adobe says you can't install the CS6 upgrade version without having CS5.5 installed. This is an utterly stupid practice that NEEDS TO STOP. It is no small burden to run Adobe's bloated installers on a large bundle package like this. Having to do it twice for my $600 "upgrade" to CS6--just to get AI to run as a 64-bit application--just adds insult to injury.
    All this stupid tedium just because Adobe couldn't bring itself to allow the regular upgrade purchase to apply to a mere one full-version back!
    And, of course, the also-stupid disparity between Acrobat and the CS bundles continues. To stay current with with Acrobat, you have to "upgrade" to new versions which are released midway between the CS versions. So much for the "all inclusiveness" of the so-called Master Collection.
    Each release has two or three half-baked "new" features which, in practice, simply do not justify the inflated upgrade pricing. Rather than being excited about new functionality, I grit my teeth each time this happens.
    Meanwhile, Corel's no-nonsense upgrade to its CorelDRAW Graphics Suite X6 (also 64-bit) is $200, and is available to users of two full versions back--without a penalty for having skipped a version they didn't find worthwhile, and without a must-do-it-now time limit.
    And of course Illustrator's text handling remains attrocious. It still can't do ordinary brain-dead simple live shape primitives. It's snaps are pathetic. It has no dimension tools, connector lines, callouts. In other words, the decades-old long list of missing ordinary basic functionality remains. And we pay hundreds of dollars for yet another re-do of its never-get-it-right window dressing.
    What a mess! Adobe needs some serious competition.
    JET

  • I used to be able to "turn on a lightbulb" using the gradient tool in CS5. How do I do it with Creative Cloud? It's not the same procedure.

    I am accustomed to being able to "light lightbulbs" and make candle flame glow with just using the gradient tool in CS5.
    Creative Cloud doesn't work using the same procedures.
    Please help.

    And what program?
    Mylenium

  • Noob needs help with gradient

    I am having troubles duplicating this image. As you can see ( if I link to it correctly) this little green box (there are three across the top "service specials" for example) is lighter in the middle and darker on the top and bottom. I am tryng to make a new one but am struggling as 'gradient' only seems to go from 'dark to light' but not 'dark to light to dark again'
    Any help please? And please keep it realy simple or give directions in detail.
    my link

    When you have the Gradient Tool selected, look at the Options bar at the top of your screen. There's a group of 5 buttons that will produce different types of gradients.
    Experiment with those, and experiment with your start and stop points when you click and drag with the gradient tool in your document area.

  • Problem with Gradient Layer and second layer with opaque object

    I opened a new document with a white background. I then used the gradient tool under the paint bucket to make a blue sky fading to white. I then created a second layer to put a sun in with diffuse edges, so as to not have just a round yellow ball. Problem is, the yellow sun comes out fine on its' transparent layer, but when I turn on the gradient layer, it gets a blue tinge from the sky and is really only half visible. An example is below. Please help. Thanks in advance.

    I'd guess, without seeing your layers palette, that your sun image is partially transparent and as such some of the blue sky is mixing with it, yielding the green color you see.
    It really boils down to what you want it to look like.  If you're shooting for more or less a "child's" style drawing of a big yellow ball, make the brush you draw the sun with have a harder edge, and paint it in so that the central pixels are opaque.  Make sure the sun's above other layers that could influence the result.
    It might be good if you screen grabbed your layers palette and posted it.
    -Noel

  • Spiny circles in CS 3 - gradient tool - get rid off

    Somehow I got two circles with hash marks (on the outer edge @45 degree intervals) that appear using the gradient tool.  Not sure how I got them there nor do I know how to get rid of them
    Can anybody help?
    You can click and drag them and it makes a sort of global gradient.
    Thanks in advance.
    Rich

    Rich,
    Unfortunately, instead of embedding your image in your post, you sent it as an attachment.  As such, it goes straight into the virus-scanning qeue and won't be visible for hours or days.
    To embed the image in your post for instant viewing, use the camera icon in the formatting bar of the reply box.
    then:

  • Problems with Config Tool; ADS not running

    Hello everyone,
    I'm trying to create an Interactive Form, but I get the following error
    com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
    com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (404) Not Found.
    I assume that Adobe Document Services is not running. I typed http://localhost:50000/AdobeDocumentServices/config in my browser. The result was an Error 404, too.
    In a documentation sheet about administration of ADS, I found that service IIOP in the config tool should be set to startup mode "always".
    When I tried to apply the changes in the config tool, it terminated with a critical error. Logfile says the following:
    Error occurred while working with Configuration.
    com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: ,
         at com.sap.engine.core.configuration.impl.persistence.rdbms.UpdateProcessor.flush(UpdateProcessor.java:294)
         at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.commitConfigurationHandler(ConfigurationCache.java:1217)
         at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.commit(ConfigurationHandlerImpl.java:833)
         at com.sap.engine.configtool.batch.task.TaskUtil.changeProperties(TaskUtil.java:335)
         at com.sap.engine.configtool.batch.task.ChangeServicePropsTask.go(ChangeServicePropsTask.java:64)
         at com.sap.engine.configtool.batch.task.TasksThread.run(TasksThread.java:46)
    Caused by: com.sap.dbtech.jdbc.exceptions.BatchUpdateExceptionSapDB: [-3018]: Invalid numeric parameter(input position 2)
         at com.sap.dbtech.jdbc.CallableStatementSapDB.executeBatch(CallableStatementSapDB.java:649)
         at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1102)
         at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1066)
         at com.sap.engine.core.configuration.impl.persistence.rdbms.DBAccessDefault.execInsertEntryBatch(DBAccessDefault.java:1170)
         at com.sap.engine.core.configuration.impl.persistence.rdbms.UpdateProcessor.flush(UpdateProcessor.java:257)
         ... 5 more
    What can I do about the two problems?

    Just for the sake of learning how to use the tool i start with drawing a rectangle then click and drag the gradient tool across the box. i see the gradient line appear but when i release the mouse the gradient line disappears
    i end up witha box with a gradient but all my editing has to be done in the gradient box as shown in this screen shot:
    What I'm wanting to achieve is how the lades hat is edited in this video Working with gradients | Visual Design CS4 | Adobe TV

  • Gradient Tools

    Seem to be having problems using my Gradient tools, tried using forground to background slecting just for the sky as i wanted to darken it but the grad is filing the entire picture with either black of white solid colours anyone else experienced this?

    What system? What version of PS? What gradient preset? What blending modes? Provide screenshots and more info.
    Mylenium

  • Gradient Tool Question

    Is there a way to specify the begin and end exposure adjustment on the gradient tool?
    What I really want to do is apply an even exposure adjustment to the bottom section of an image. There's a hard line where I want the adjustment to begin, so I don't really need a gradient. I know I can do this with the adjustment, but that requires passing the brush over a large section of the image and, of course, being very careful in lining the edge of the brush up with the edge of what I want to lighten. I'd like to be able to put a line across the image and say "lighten everything below this line" by x amount.
    Any way to do that?
    Thanks.

    You wrote:
    "What I really want to do is apply an even exposure adjustment to the bottom section of an image. There's a hard line where I want the adjustment to begin,..."
    You apply the graduated filter from the botto up if you want to change the bottom part of the image and you apply it from the top down if you want to change the top part of the image.
    "Bottom" and "Top" (where you start the grad filter) means the bottom / top margin of the image and then you drag up or down.
    If you don't see the white / light grey lines of the grad filter press letter "H" on the keyboard. You can adjust the transition zone by dragging the lines  closer together or farther apart. You can rotate the grad filter: hover with the mouse over the center line and a curved arrows icon appears. Then drag to rotate.
    Apart from that you can adjust the Exposure, Brightness, Contrast, etc. with the sliders. You can also apply a coloring by clicking on the small icon besides the word <Color>. You can choose from the preset colors that are like warming / cooling fiolters in traditional (film-based) photography ar you can select a color from the image by dragging the eye-dropper into the image.
    WW

  • Aspect ratio lock / gradient tool / brush /  doesn't remember status

    hello,
    why do i always have to tell the aspect ratio lock 1023429384 times to lock itself until it remembers it's status?
    it's the same with the brush or gradient tool. it remembers only it's previous status which is kind of total nonsense and annoying.
    what am i doing wrong?
    thank you!
    geerd

    Frustrating isn't the word.
    I reported this through a previous post (much the same as you are experiencing).
    crop not keeping to ratio
    It was ok in LR3 and is ok in LR5 (I think)
    so they have fixed the bug, but where does that leave the LR4.4 users ??
    Upgrade to LR5 ?
    Surely there should be a LR4.4 bug fix that can be downloaded instead of yet another purchase to upgrade.

Maybe you are looking for