Unwanted foriegn page on Desktop

When I boot up my eMac I get the following page and would like to not have it pop up.
Brænde et diskbillede på en CD eller DVD
Du kan bruge Diskværktøj til at brænde et diskbillede på en CD eller DVD. Du kan bruge disken som sikkerhedskopi, og du kan bruge den, hvis du vil overføre arkiver fra en computer til en anden eller gendanne arkiverne på en disk.
1 Åbn Diskværktøj, som ligger i Programmer/Hjælpeprogrammer.
2 Træk det diskbillede, du vil bruge, til vinduet Diskværktøj, hvis diskbilledet ikke vises på listen.
3 Vælg diskbilledet, og klik på Brænd.
4 Sæt en CD eller DVD i det optiske drev på computeren, og følg instruktionerne.
Åbn Diskværktøj
The path is:
file:///Library/Documentation/Help/MacHelp.help/Contents/Resources/da.lproj/pgs/ mh1884.html
How do I delete this page or stop it popping up?
Cheers
Steve hill

AHHHHHHHHH! If it ain't broke....
After unticking something that had 1884 HTML at the end in the statup items box I closed down and started up:
Grey screen. with small 1" square appears with a circle inside it and what looked like North and South America in it and nothing happened - or maybe I didn't wait for long enough?!
So, I closed down again, diconnected the router and the two external HDs (don't ask me why - I just did) then rebooted - same again only this time I stated clicking the screen - total panic reaction - but the square turned to a folder with a question mark in it and alternated with the Mac Face then the secreen turned blue, but not as blue as the air was before, and everything kicked in.
Was my frantic clicking the solution or had enough time passed for the comp to kick in?
Ical schedular was still clicked
Any thoughts anyone
Steve
Oh yes, the Scandinavian page reappeared on the startup

Similar Messages

  • How to get pages from desktop to iPad using icloud

    Can someone help me please?! I am not that great with all of this but have Pages on desktop (version 10.7.4) and have an iPad2, i am trying to get the documents from desktop onto iPad with no luck. I have brought the app for the iPad and have icloud which is working and as far as I am aware everthing is where it needs to be, but how do the documents get onto the iPad??!!  Do I have do something, if so what or should it just all appear? Also can you edit a document on the iPad or make a new document, save it and then it will appear on the desktop?
    Appreciate any help!
    thank you.

    Aside from using the suggestions (both) above also make sure that you go to Settings>iCloud>Documents and data>on.
    If the documents do not appear on the iPad after you have checked the settings, try creating a dummy document on the iPad. It can be anything at all. Quit Pages completely and then launch the app again.
    Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Launch Pages again.
    If you were running Mountain Lion you would not need to drag the files into the browser - if you had iCloud all configured correctly on the Mac.
    Once iCloud is set up and working as it should, you can simply launch Pages on the iPad, the edited files will appear and you can open and work on them there as needed. when you finish working on the document, the edited file will upload to iCloud again and be accessible in the browser like laxman described.
    Message was edited by: Demo

  • Unwanted blank pages inserted when creating pdf from scanner

    Hello, when creating a pdf from a document scanned via Adobe Acrobat X Pro, the program inserts an unwanted blank page in between each page  being scanned.  So, if scanning 50 pages, we get 100, etc.  How do we remediate this problem?  We have worked with the default settings, to no avail.  We're using a Fujitsu fi-5530c2 scanner.  We would appreciate any input to help resolve this issue!  Thanks Mark

    Hi,
    you can automaticaly fix previously made documents using the Preflight tool.

  • Well, i was on my laptop now and all of a sudden a pop up message appeared and said "your download is complete" so i went to go check it out and it was 'MacProtector'. i cant delete it and it keeps opening unwanted web pages, please help me sort this out?

    Well, i was on my laptop now and all of a sudden a pop up message appeared and said "your download is complete" so i went to go check it out and it was 'MacProtector'. i cant delete it and it keeps opening unwanted web pages, please help me sort this out someone?

    Refer to:  http://cantalktech.com/2011/05/08/mac-protector/.

  • Firefox Sync has syncronized internet pages onto desktop as mobile format.

    Firefox Sync has syncronized internet pages onto desktop as mobile format.
    Pandora
    Facebook
    igoogle

    Okay, that's a lot of information. I think the key part for support purposes is this:
    ''TheDrive [[#question-1057777|said]]''
    <blockquote>
    Just try yourself. Setup new profile and work a few days or weeks on any theme(s). Do not close tabs (at least ones, which you wanna explore once more). If your PC has 2-4Gb of RAM you will notice FF stopped to save session info after you will have a 50-100 tabs opened (you'll see sessionstore.js or session-backups\*.js script files reached 15-20-30MB long and stopped to change and it's LastMod date/time(s) are frozen) ...<br><br>
    ... I've noticed FF started to hang more and more and checked previous.js, recovery.bak, recovery.js was last modified on Apr, 14 but today is Apr, 16! I've lost one more hour trying to save tabs, even installed Session Manager, promised session saving on user demand but after a half hour of action against hanging FF, plugin showed me that I have NO ONE tab to save. I've managed to copy a few URLs to the text file before FF have completely fallen.</blockquote>
    You're not the first person to report that the sessionstore.js or recovery.js file stopped updating with new activity. However, it's rare enough that I can't recall whether we have gotten to the bottom of it in a previous thread. I'll see whether I can search it up.
    Meanwhile, someone might be able to come up with a way to watch for problems and extract some debug information, but I'm not personally familiar with such tools.

  • Unwanted floating page

    After exporting/publishing on this site http://www.kohenderiks.nl the "blog" pages floats unwanted.
    Pages settings are identical.
    Here a temporary link to clearify........
    https://www.dropbox.com/s/y2fc0pgy2vqvepr/Muse%20floating%20page%20issue.mp4
    Happy to hear how to resolve this issue, which seems a bug to me.

    Well son, If you delete invisible items on the page which aren't of any use your issue will be solved.
    It is NOT a bug, you silly!
    But hey, you won't be the first who doesn't see what doesn't seem to be there but is there nevertheless huh?
    Cheers old chap!
    P

  • Unwanted Second Page

    Hello!
    I have created a form.  I added a second page using the break feature, but then removed that break.  I now have an unwanted "Next, page 1 of 2" at the bottom of my online form.  There is no break in the form.  I put in screen shots  The top is my design. The second is my preview.  Please help.  Thanks!
    *Stepanie

    In the bottom right corner of the Design tab there is a drop down that switchs between page view and web view. Change it to web view to remove the page break. The page breaks in eah view are independent of each other.

  • PHANTOM web page loads on startup. Upon startup, an unwanted web page loads up.

    PHANTOM web page loads on startup. Upon startup, an unwanted web page loads up. My preferred web page "A" is still shown on the settings under -Tool-Options-General, home page address is correct and home button works correctly.
    Some file somewhere is forcing this page upon startup. I would like some ideas where to look.
    I have run various utilities such as AVG, Tweaknow, and spybot s&d newest version.
    Its just annoying to have to look at Yahoo Brazil upon startup
    A few months back, someone suggested some reset setting in Firefox, boy what a mistake, took a long time to get things back the way I like them, and it didn't work.
    I see this in the troubleshooting info ???
    "browser.startup.homepage_override.mstone": "19.0",
    "browser.startup.homepage_override.buildID": "20130215130331",

    The prefs that you posted are normal for a Firefox version (in this case Firefox 19.0.
    Please update to the current Firefox 22.0 release.
    *Help > About Firefox
    *https://support.mozilla.org/kb/update-firefox-latest-version.
    *https://support.mozilla.org/kb/Updating+Firefox
    The Firefox 19 version that you currently run is no longer supported with security updates.
    *It is important to update Firefox and add-ons to the latest version to get all security fixes.
    Try to use the SearchReset extension to reset some preferences to the default values.
    *https://addons.mozilla.org/firefox/addon/searchreset/
    Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    If you do not keep changes after a restart or otherwise have problems with preferences, see:
    *http://kb.mozillazine.org/Preferences_not_saved

  • Unwanted separator page

    Hello all,
       I have a Photosmart C7250 and I have it hooked up wirelessly to two different computers. My laptop, which is a Dell XPS M1330, works flawlessly, but the from my desktop, which is an HP Pavillion m8020n media center PC, the printer spits out a blank page between EVERY page printed. I have checked ALL of the settings and preferences and compared between the two computers and both are set exactly the same. This is truly an annoying issue and have been able to find no solution anywhere! Can sombody PLEASE help me with this?!?
    Thanks a million,
    Scott B.

    In the bottom right corner of the Design tab there is a drop down that switchs between page view and web view. Change it to web view to remove the page break. The page breaks in eah view are independent of each other.

  • Newbie Q?.. Opens in Tablet page on Desktop?

    Hey guys.. have just started playing with Muse.. Watched the Terry White tutorial.. Now in muse..
    Made the 3 basic pages (all default settings) First for Desktop, then Tablet, then Phone.. Added 1 small line of text eg. "This is the desktop page!" etc etc.. and small pic 200x200 under on each (no master).... and saved to test/preview...
    Now when I try to preview the main html page.. It opens in the Tablet page??... the tablet & phone pages are down in there subfolders as they should be?..

    Sorry guys never mind... found the thread about the chrome issues!.... Guess the Chrome team havent fixed it?...
    Tablet version of website is showing up instead of desktop version in Google Chrome

  • Safari 8.02 Unexpected annoying unwanted popup pages

    Using Safari 8.02 with Yosemite, this bug happens sytematicly each time I click on a page on screen. Every time, in order to get the expected url, I receive an Unexpected annoying and unwanted page, looking like malware or advertising unvolving a quite different object.
    I prefer to ask the community before being  mad… Is it  a wrong preference , a malware, a virus ?
    I'm looking for a refernce for the best virus bareer especially for safari

    1.  Use  free  AdwareMedic by clicking “Download ” from here
         http://www.adwaremedic.com/index.php
         Install , open,  and run it by clicking “Scan for Adware” button   to remove adware.
         Once done, quit AdwareMedic by clicking AdwareMedic in the menu bar and selecting
        “Quit AdwareMedic”.
                   or
        Remove the adware  manually  by following the “HowTo” from Apple.
        http://support.apple.com/en-us/HT203987
      2. Safari > Preferences > Extensions
        Turn those off and relaunch Safari again.
        Turn those on one by one and test.

  • I get unwanted massive page downloads to my download PDF file every time I attempt to download something I want; this download takes over my MacBook and I have to force quite to stop the download.

    This started happening after I attempted to download my property tax report from the county. I will get the page I actually wanted to download but I also get page after page of unwanted material downloaded to my MacBook. The only way I can stop the massive page download is to force quite the MacBook and then restart it and delete all the unwanted pages.

    I have updated my firefox files as directed, is there anything else I can or should do?

  • Unable to download Pdf page to desktop/file

    Vista SP2
    Adobe 9 Ver 9.2.0
    IE 8
    I AM able to download my Gas Bill Statement in PDF from my provider and and read it.
    When i click the Download to File icon of the PDF gas statement (next to the print icon) nothing happens !
    I AM able to Print a copy on my printer ok.
    Note: I AM able to download to desktop/file all other statements from all my other service providers without any problem.
            When i contacted my Gas Provider with this problem they informed me that they were able to download my statement on two different computers in their offices with no problems stating the problem must be with me !!
             I have uninstalled and reinstalled Adobe 9 twice with no effect.
    Can you advise as to why i cannot download the GAS PDF statement page to my files but i can evey other service provider PDF statement ?

    "Save Target as" is not available to me....its lettering is a very light pale colour....whereas Save Picture is a dark colour like this...and that is the one i clicked in error as you suggested !
    Why am i unable to activate "Save Target"...what controls this ?
    Dont understand "hover the mouse...." as when i hover the mouse over " View Statemant" you previously asked me to "Save" is on a Briish Gas web page, which does take me to the PDF statement (with a right click)t but once there when i click the Save ti file icon nothing happens.
    I really dont want to use an unknown browser when everything else on my computer requiring PDF works ok..

  • Unwanted summary page is printed along with print request. Why??

    When I print a MS Word document, an unwanted document summary is printed first that includes Filename, Directory, Template, etc., Total Editing Time, etc. number of : words, pages. and characters. 
    Does anyone know how to request this special page? 
    Or how to shut it off? 
    Best regards, 
    CharlieM1
    This question was solved.
    View Solution.

    Hi CharlieM1,
    I understand you are getting an unexpected (and unwanted) document summary page whenever you print something from Word. Take a look a the following, Stop summary sheet from printing with document. Scroll down to the first suggestion following the question. The replier explains later in the thread that the "Office button" is just the File tab now if you are using a version of Word later than Word 2007. I hope this is helpful. Good luck and have a wonderful day.  
    Ryan1216
    I work on behalf of HP
    The advice and opinions given here are my own and not those of HP

  • Unwanted additional page printing officejet pro 8600

    I have an officejet pro 8600 and i must have changed a setting when trying to solve a seperate problem (now resolved) but cant find what i did. The result is that when i print a word document, any text on that document is printed again on a subsequent and therefore unwanted page. Any ideas?
    AJM

    Hello @ajm100 , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are running into page print issues.  I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Also, does this issue occur when making a copy?
    Please let me know what you find.  Thanks for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

Maybe you are looking for

  • Can you set a time range in the wiki calendar?

    I think the wiki calendar is a great feature in 10.5 Server, however I am annoyed by one problem. I can't figure out a way to limit the time on a wiki to say 8am to 5pm. I would like to use this as a class calendar page on the wiki, but it is really

  • EPSON CX5600 PRINTER DOESN'T WORK AFTER MOUNTAIN UPDATE

    Hello Dear, I've using my Epson Stylus CX5600 for a  long time with OSX 10.7 Lion on my Mac. The printer is connected in another computer (Windows 7) and I can print fine from my macbook air After my system update for OSX Mountain Lion yesterday, my

  • Can't get OWA working at all!

    I installed Microsoft Exchange 2013 on to a server and then I added all the users from the directory.. local login worked flawlessly. Then I try to get on OWA and this is where trouble begins... At first, it was giving me 403 errors until I put in th

  • Alternative way to transfer file from pc to iphone other than using itunes

    i need an alternative way to transfer vedios, pictures, and docs from pc to iphone

  • Session List and Last Access Time

    I want to get a list of WebLogic's current/active sessions and find out the user's last access time for each session. How can I do this? I'm using WebLogic 4.5. Thanks in advance. Sincerely, William H. Stone X U M A <build-to-order e-business> Willia