Unwanted Noise Recording Voice with GarageBand

Hi everyone, I'm using podcast factory as mic for my podcasts, and GarageBand to record them.
The trouble is, that even shifting a little in my chair is picked up by the mic, and I daren't type on the keyboard or really move at all for fear of putting really heavy noise on the track.
Im not sure what to do about this, as my voice sounds great apart from that!
Anyone help me out? thx..

Hello Nick,
Along with the excellent advice already given, here's what I would suggest: If you're using a desktop mic stand, avoid putting it on the same table or desk as your computer. You'd be surprised at how much rumble and hum the computer is creating. Also, use a foam wind cover over the mic.
If you don't have access to a "dead" room get a floor stand for your mic and record in a clothes closet. Yeah, I know it sounds stupid but I tried and got better results than sitting in my den. Rooms with hardwood floors, sliding glass doors and bare walls will affect the quality of your sound.
I'll mention one other thing that worked for me until I could afford better equipment; the Logitech 350 headset mic. It's USB and does a pretty good job of isolating your voice while you record.
Hope this helps. Good luck!

Similar Messages

Can i record voice with garageband?

Can i record voice with garageband?

Hi,
I am a Garage Band dunce (first time user). I’ve imported a guitar track as track 1.
I launched a “new basic track” with no effects for the vocal track, but cannot get any vocals to show up on the meter before recording.
I can click on track one (my guitar track) and I can see the meter move when speaking into the mic, but when I click on track two, I get nothing from the mic.
I’m sure the answer is obvious, but I don’t see it. Any tips?
Thanks,
Terry

Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface.

Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface but does not arrive in Logic. The Loops works fine and i can hear. Is just the sound to record the voice it does not work. What can i do ??? I used Logic before in the same computer and it worked fine. Thank you so much, I´m a begginer recording myself.

Make sure you go into preferences in Logic and set the audio input to be your interface and the audio output to be either built in output or the interface, if that is hooked up to something else. It sounds like Garageband has the audio interface set as the input but not Logic.
Also make sure you close all other applications except Logic to ensure it is not running in slave mode...

Air or Pro for Recording vocals with GarageBand or PT and Producing

I'm considering buying a MacBook and would like to get a new Air. I will be using it mainly for recording my vocals on beats that I have bought on iTunes. I'm also going to be taking a couple of Coursera classes on music production. Can the new Air's handle GarageBand or Pro Tools well? I've been using my iPhone 4S with GarageBand to record but I would like to do more editting of my vocals with Pro Tools. The reason I like the Air is b/c it is light and easy to transport.

One thing with vocalists, I can think of, is to show them the input device, and have them watch the clip meter. After a few takes, if they are somewhat savvy at singing into a mic, they'll start to back off on strong notes, and moving in on subtle notes. If you watch a pro singer on stage, you'll see them pulling the mic in close for soft stuff, and backing it way off for the strong notes. In the studio, the same techniques can be used, but the person has to back away, rather than a hand held mic pulled away.
Hardware can help this to an extent, but the singer has to take some action to get the best performance recorded. If I were going to use hardware, it'd probably be limiting more so than compression. Limiting can keep your signal under control, without doing too much to the dynamics. I'd prefer to save compression for post, so I can decide what sounds best. I used to have a female vocalist with an amazing voice. i was NEVER able to capture her properly on tape, since I had no pre processing at all. She is still in this area, and I have invited her to come record some vox for me, because I want to see if I can now get a grip on them. If I ever do, she'll be featured on an upcoming CD

Record voice with microphone into local file.

I would like to build a small application in AS3 adobe Air so that my users can record their voice with microphone.
I know there is a Microphone class but I don't know if AS3 adobe Air allows to record the voice into a file locally.
Is that possible to do so with AS3 adobe Air?
Do I absolutely need Flash Media Server or is there a way around?

The Microphone class doesn't allow access to the bytes that are being streamed. Join the cause to open the access! http://www.getmicrophone.com/
Although, you can accomplish this by using a streaming server I believe. I've not yet experiemented with just audio recording, but I have with video/audio recording and that works just fine.

To record voice with a few second pre roll time

When I record my voice, I want to hear pre-recorded voice a few second just like voice over tool in FCP.
Has Soundtrack pro the fuction?

No there isn't preroll.

Recording Problems with GarageBand

My micophone makes bad noise only in GarageBand while recording. The record sounds bad, too. It crackles very loudly. That's a new situation for me. Until now everything works nice. There are no problems with other programms. I use a USB Audio Interface Line6 TonePort UX1 with an AKG C1000S microphone. Can you help me please. Thanks a lot. Sorry for my bad english.

I'm having a weird audio sync issue as well with GB '08 that I never had with previous versions.
Basically, audio tracks gradually drift forward in time as the song progresses. They drift almost a full bar ahead of where they should be after about a minute into the song.
When I watch the wave form in the editor as I'm recording everything looks correct, but after stopping and playing back a process runs and then the sync is completetly screwed up.
I've tested every hardware variable I can think of -- external FW drive vs. internal drive, external hardware (Digi 002r) vs. built-in audio. I even tried 16 bit vs. 24 bit recording and I continue to have the same problem everytime.
Again, I had no issues with the exact same hardware and previous versions of GB, which leads me to believe that the problem is software related. I'm wondering if all of these new features come at the expense of memory and/or resource issues.
Anyone else experience this or know what the fix is?
Message was edited by: Glenn Goldstein

Just want to record voice with my built in iMac microphone...guidance?

evental goal is to use audo voice track for FCE, but want to lay down an audio track for a placeholder to measure length (time) and make some queues... any suggestions? Garage Band or something else.
thanks
-Russ

Ok i have recorded a little sample with both Audicity and with QT.
it look like either will serve my 3 purposes 1) see how long copy is. 2) have something to put down in FCE and 3 send to my VO guy so he has a "go-by"

I use Garageband 09 to record voice overs via podcasting, female narrator noisy, but keep getting an intermittent clicking sound. It's not the metronome. I have a good quality external USB mic plugged in. Any ideas?

I use GarageBand 09 to record voice overs via the Podcasting then Female Narrator Noisy utility. I have a good quality external mic plugged in. I keep getting an intermittent clicking sound on the audio track. It's not the metronome as that is turned off. I have to edit out the clicking after recording. I can see the spikes on the waveline. Any ideas how I can prevent this happening?

Hi again and thanks so much for replying.
The 'mic jack' on the old mic is both wide and large, measuring about an inch and a quarter from the base (where it comes out of the black encasing) to the edge of the tip (sort of cone shaped). As I can't plug this in directly to any port in the back of the Mac, I thought it might be possible to to buy some sort of adapter so that I could plug in the jack at one end, with a USB connector at the other end to go straight into the Mac. But I see from your comment that you are suggesting a smaller jack itself (i.e., large size jack to small size jack and then plug in to the small round port, instead of jack to USB port)?
At the Mac shop I bought a USB adapter to connect up a second monitor (screen). I've just dug out the package and it's called a mini display port to VGA adapter. But back to the mic issue, I don't want to use the old mic really, I'm just trying to eliminate whether or not my usual mic, or its USB cable, is at fault and causing the clicking.
I looked on Amazon for a suitable adapter but there was mention of these little gadgets having a sound card. As the Mac obviously has its own internal sound card, I couldn't see the point of another (exernal) one, unless it was actually required to convert the sound from input to output (playback) or something. One review said sound quality was lost but the person had a problem with his speakers, not a ticking sound while playing back recordings - which is obviously my problem.
I do have a headset that I used to use for Skype. It has a pink and a green jack. I could plug one into the "headphones symbol' port and try recording again with Garageband. At least the jack is the right size. Again, this is just for the purpose of eliminating whether my good mic on a stand with the anti-popping sheild is at fault.
While my Mac does have both inbuilt speakers (I don't need external ones) and an inbuilt microphone, the latter is not of a high enough quality for voice overs, hence buying an external mic etc. But whatever is causing the clicking or ticking is obviously affecting the quality of my recordings. As you can imagine, it is very time-consuming to edit out the ticking spikes and if the noise appears during speech, you can't edit it out at all.
Please keep the suggestions coming. I am determined to get to the bottom of this for my sake and everyone else who is suffering from the same problem!

I record interviews on GarageBand. Is there a way to transfer audio to text?

I am a writer and conduct telephone interviews, recording them with GarageBand. Is there some software, or a way to transfer the audio I record directly to text?

I don't think I have the "Dictation to Speech" setting in my MacBook
Maybe your MacOS X version is too old. Dictation has been introduced with MacOs X Mountain Lion, 10.8.
Mac Basics: Dictation lets you speak text instead of typing http://support.apple.com/kb/HT5449http://support.apple.com/kb/HT5449
What is the last MacOS X version, that your MacBook supports? Could you upgrade to Mt. Lion?

How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no effects is going thru?

Hi Life93,
What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
See this thread on how to remove the audio from a clip in iMovie -
Is there a way to separate audio from a video c...
https://discussions.apple.com/thread/1779767
To add audio from GarageBand use this article -
iMovie '11: Add a sound clip to your project
http://support.apple.com/kb/PH2255
Thanks for using Apple Support Communities.
Best,
Brett L

Recording a radio show with Garageband '09

Hi guys,
I am looking to move into the Garageband world now that I have just purchased a brand new iMac.
My main purpose for Garageband would be to import audio and record my voice as a talk over for a radio show.
I can see there is the built-in ducking which is fantastic as that immediately would make my process alot easier.
I am just not sure about the recording aspect in terms of real-time.
For a live radio show usually a piece of music would play and the radio announcer would voice over it.
This is what I would like to do however I am not sure if Garageband does this in real-time or not?
I have a Rode Podcaster mic which I'm sure will be easily recognised and used within Garageband also.
Anyone who has any experience or knowledge with this particular scenario, I would love to hear from you!
Much appreciate your assistance and feedback
Cheers

Thanks HangTime,
I knew I would need to do the import of audio and record voice.
Just more concerned about the real-time recording eg. does the ducking occur should a song be playing live and I do a voice over, all whilst recording.

I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4. However, I cannot record voice memos with my Bluetooth mic.

I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4, so it appears my headset mic is fine. I can also use voice activated dialing, although it fails miserably interpreting numbers. However, I cannot record voice memos with my Bluetooth mic. I just get barely audible static. Any suggestions? Thanks.

Hello, did you ever get an answer to your question? I just picked up a Jawbone Era and using on an iPhone 4s running 5.0.1. Seems to work fine on regular calls, but not on the built in Voice memos application. It worked fine on my older Jawbone Icon, but haven't tested on the 4s or iOS 5.
Thanks!

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

Recording with Garageband for IOS

I wanted to share a recording or two using the ipad so that people could see that garageband for IOS doesn't suck. I didn't spend too much time throwing them together, but at the same time they're not too horrible either. They give a pretty decent idea of what a 1st gen ipad with a 5 dollar app is capable of in regards to guitar and shred-type guitar stuff. I'm kind of sick of reading and listening to scathing reviews on how the ipad and Garageband in particular is for non-musicians and noobs who want to sound like they're making music... (ooo that could describe me... yikes!) If I could have had an ipad-like device when I was just getting started, I think that I would be a much better player today. I am totally blown away at the expectations people have of a 5 dollar program, when they haven't spent the time trying to see what it does do well. Anyways, here's hoping that this post helps people out that are trying to find out what the capabilities of an ipad with GB are, especially if they are a guitarist. At the end of the day, it is still the person using the device that either makes it sound horrible, mediocre or amazing...
So anyways, I decided to make a quick track where I didn't spend too much time on the music, and I used only what was in GB in regards to my tones and stuff; That means all stock amp and pedal combinations. I also wanted a track that focused on guitar parts, and making the best of what the app has to offer. I'm sure with some tweaking and mucking around there could be some much cooler tones generated, but hey... it is what it is. Also, I used a Godin LGXT direct into the ipad with an Apogee Jam. Very inexpensive. Bass and drums were recorded with the Line6 Mobile25. The tablet's screen works too, but I find that the keyboard is a lot more accurate, especially for drums. Obviously, you could go into the drum and guitar parts and edit and tweak the parts further, creating drum parts that feel and sound a bit more lifelike, but I didn't do that here; this one was about direct recorded electric guitar...
https://soundcloud.com/jayesskerr/ipadgination
Arguably, you could also record your stuff via microphones also. In this case I used a Roland VS880 as a mixer (It was handy), with 4 CAD microphones connected to it to capture my drum kit. (I'm not much of a drummer, but you get the idea...) I then just lined out of the VS880 into the apogee Jam into the ipad. BANG! This app could work very easily for drummers also... or people who must have their tone and not a digital preset...
https://soundcloud.com/jayesskerr/just-drums
I own a couple of good mac boxes loaded with killer software, and I also have some decent interfaces. They are pretty superior in regards to the amount of options that they present, without a doubt. And then when you include all of the 3rd party plugins and loops and stuff that you can get... well, it's very, very nice. The ipad intrigued me because it's self contained, and is extremely portable. It has limitations which force one to be kind of clever in order to work around them. Also, the recording process with an ipad is very, very quick. Setup time is minimal. So anyways, with just Garageband, and an Apogee Jam (I have the irig connector also, but in my opinion the Jam is so much superior...). The only other thing I'd reccomend is the Line6 Mobilekeys25 which I used here; MUCH easier to enter notes in on bass and drums. Here's some points to sum up my opinions on my experience with the device;
No it's not better than Logic or Cubase or prottols or something with an interface. It's only a 5 dollar app on a 600 dollar tablet (In my case an outdated 1st generation ipad).
There's only 8 tracks, but you can bounce and merge.
The amount of sections is limited, but you can work around that too...
It's extremely portable. Way less gear to haul and set up, but feel free to use your own stuff with it also...
GB on a tablet is very, very easy to learn. Super intuitive and quick to use.
The amount of sections is limited, but again you could always just make another song project and then stitch it together later...
The amp and pedal emulations aren't as good as Guitar Rig, a line6 Pod Pro hd, or a FAS Axe-FXII. But they aren't horrible, they are certainly pretty good for the price of 5 bucks...
If you're broke/poor and want to get into recording and sharing your music, this is the ideal way to go about it. Your recording device (The ipad) also makes documents, does email, takes and edits pictures, takes and edits video... The only thing standing in the way of you sounding great is you...
The 'merge track' option is a powerful tool, especially on your midi tracks.
No pitch correction. Waaaaaahhh boo hoo! You're gonna have to learn how to sing. Plus, it's only 5 bucks!
Don't want to use the internal drum sounds? Or want to use your amp's miced sound? Get a small mixer, and connect your mic to that. Then connect the mic to the Apogee Jam (There are other products out there that work better and in stereo, but this would do in a pinch) and you should be good to go.
I recommend using a small keyboard like the Line6 Mobile Keys 25 to enter your midi/virtual instruments stuff in. For me, using just the pad means more track editing after I enter it...
The last point is this; there's other software besides just GB. Cubasis anyone?
Anyways, thanks for checking this out, I hope that it helps, and if anyone else has any opposing viewpoints or points to add, please do.
http://www.guitarius.net
http://www.youtube.com/user/Scottulus

Yes, I do it all the time. The best I have found is the Apogee iMiC. Here is a link. http://www.apogeedigital.com/products/mic.php

Unwanted Noise Recording Voice with GarageBand

Similar Messages

Maybe you are looking for