Unwanted ok Prompt via Secure Console Switch?

We have 2 CS800's by Lightwave (now Lantronix)
I merged them into 1 Lantronix SCS3205.
16 devices, 1/2 HP-UX 1/2 SUN Solaris.
HP boxes are fine.
Solaris boxes are at ok prompts! All I did was unplug from one console switch to the other. Done this 1000 times with a laptop.
Lantronix says to do this with the power off (I haven't had to in the past) or disable the "Hardware Break Feature" on the Sun box, but wouldn't this stop my use of stop+a ?
Sun has no idea what to do, help?

kbd -a alternate
.. will make the system use the alternate break sequence, and disable the ordinary stop+a and serial BREAK signal, instead it will use <enter> ~ <ctrl + b>
.7/M.

Similar Messages

Getting to ok prompt via serial console

Hi,
I have set up the console to be on ttya, and am using a terminal emulator on a PC to connect/watch the console.
Due to an error in the driver I am writing the system resets; I managed to stop the continuous reset cycle (it dies during the probe) by randomly pressing keys, and can now change the kernel to be booted to get back the system, but I would like to know what I can press to generate an intelligent sequence of keystrokes to emulate (for example) the Stop-D to get me back to the prom nicely so that I can change settings.
Alternatively, are there any other ways to get back the system and neatly delete my driver?
Thanks in advance,
S.

HI
Have you tried control + Break ? This is supposed to put the system
to the OK prompt in most PC's.Then you may have to boot the system through a CD ( boot cdrom -s), mount the root partition, remove the driver from /platform/kernel or wherever it is.
You may also boot through kadb ( boot kadb) which will drop you to kadb prompt on panic where you can say :c to get OK prompt in most cases.
HTH
Shridhar

Unable to send mail via Secure SMTP

Our email system allows users access to their accounts via secure IMAP and SMTP.
I am able to connect and view my inbox via secure IMAP, using a number of different S60 devices - namely E72, E52 and 5800.
However I am unable to connect to send via secure SMTP.
By contrast, I am able to view and send mail with Apple and Android devices without any problems.
On my comparable UAT configuration the S60 devices do not have this problem.
On UAT, we use a self-signed certificate, as opposed to the Live system which uses a Verisign certificate.
Help, please!
I'd like to be able to send mail with my S60 devices.
How can I resolve this apparent problem with the certificate?
Echo

An Update of sorts.
On my E72 I removed all references to Verisign under: Ctrl. panel -> Settings -> General -> Security -> Certificate management -> Authority certificates. (There were about 6 entries)
I tried to connect afresh, but the phone took two attempts to pick up my password for email.
I now have a 'Trusted site certificate' for the email server.
However, I still can't send. A message pops up 'Unable to send message: <target address>'

Using network shared variables in two computers connected via a network switch

let me start by saying im a rookie to the programming environment but i have used Labview a couple of times to understand the basics, i have a computer and a laptop (both using vista), both of them with Labview Full development System (Student ed. with Mathscript) installed, so what im tryin to do is to use the built in microphone located in the laptop to aquire sound and then use a Shared Variable to transfere the sound signal from the laptop to the computer, the laptop and the computer are connected to a network via a network switch and ethernet cables, so far i nothing worked, i can manage to create the shared variable in the laptop and use it there but it doesnt appear in the computer, im not sure whats the problem i have even disabled firewalls in both systems, help from anyone wil be appreciated.....

Hi Lukie,
This KB should be of some assistance to you.
Trouble shooting network published shared variables
Also the following link gives some instructions on the use of shared variables.
http://zone.ni.com/reference/en-XX/help/371361B-01/lvhowto/bind_to_source/
I hope this is of some assistance, let me know if you have any more problems.
All the best,
Message Edited by mickeyw on 08-05-2008 12:29 PM
Mike W
Applications Engineer
National Instruments UK&Ireland

Error during deploy via BPEL Console

I've downloaded BPEL Production version on May 27th.
When I create a jar via 'bpelc' and I deploy via BPEL Console 'Deploy new process', I have this error every second in the system.out/system.err of BPEL:
<2005-05-28 13:32:55,958> <ERROR> <default.collaxa.cube.engine.deployment> <Cube
ProcessMonitorWork::run> Error fetching handle to domain manager
Moreover I don't see the new process in the dashboard. If I restart BPEL, the new process appear in the dashboard and no error in System.out/System.err
What can be?
Thanks

Could you please mail me your project file at [email protected] ( zip it, rename to .zipr) and please do let me know the steps to replicate the same.

Migrating data created via Admin Console

Hello Gurus:
Our dev team have been using pointbase db to create all objects related to our
portal app. Now we wish to export it to Oracle db. We were able to sucessfully
export objects (eg. user profile, navigation etc) created via EBCC to Orcale but
we need to know how do we do this for objects (mapping of portlets to portal page,
user etc) created via Admin console ? Thank in advance
Regards
Girish

Girish,
This is a common question, and the answer usually does not make people happy.
As you pointed out, the solution for migrating EBCC data between dev-staging-production
environments is simple. The data sync mechanism handles this well. The problem
is with the data that you generated with the JSP based tools. Currently, there
is no other supported way than to replay your changes in the JSP tools in the
new environment.
That being said, it is a high priority task within BEA to provide a better solution.
Check periodically with this newsgroup or dev2dev.bea.com for news concerning
this solution.
Sorry!
PJL
"Girish" <[email protected]> wrote:
>
Hello Gurus:
Our dev team have been using pointbase db to create all objects related
to our
portal app. Now we wish to export it to Oracle db. We were able to sucessfully
export objects (eg. user profile, navigation etc) created via EBCC to
Orcale but
we need to know how do we do this for objects (mapping of portlets to
portal page,
user etc) created via Admin console ? Thank in advance
Regards
Girish

Bought the Aperture program. The interface in Japanese. Thanks, very conveniently. Can will prompt how to be switched to English?

Bought the Aperture program. The interface in Japanese. Thanks, very conveniently. Can will prompt how to be switched to English?

Delete the Aperture app you currently have installed using this free utility > Download AppCleaner for Mac
Then re download Aperture using the same Apple ID you used for the original purchase. You will not be charged again. Before doing so, click the round flag icon bottom right corner of the App Store window. Make sure you see the U.S. flag. If not, click the flag icon so you can swtich to U.S.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.

Sun Cluster 3.x connecting to SE3510 via Network Fibre Switch

Sun Cluster 3.x connecting to SE3510 via Network Fibre Switch
Hi,
Currently the customer have 3 nodes clusters that are connected to the SE3510 via to the Sun StorEdge[TM] Network Fibre Channel Switch(SAN_Box Manager) and running SUN Cluster 3.X with Disk-Set.The customer want to decommised the system but want to access the 3510 data on the NEW system.
Initially, I remove one of the HBA card from one the cluster nodes and insert it into the NEW System and is able to detect the 2 LUNS from the SE3150 but not able to mount the file system.After some checking, I decided follow the steps from SunSolve Info ID:85842 as show below:
1.Turn off all resources groups
2.Turn off all device groups
3.Disable all configured resources
4.remove all resources
5.remove all resources groups
6.metaset �s < setname> -C purge
7.boot to non cluster node, boot �sx
8.Remove all the reservations from the shared disks
9.Shutdown all the system
Now, I am not able to see the two luns from the NEW system from the format command.cfgadm �al shows as below:
Ap_Id Type Receptacle Occupant Condition
C4 fc-fabric connected configured
Unknown
1.Is it possible to get back the data and mount back accordingly?
2.Any configuration need to done on the SE3150 or the SAN_Manager?

First, you will probably need to change the LUN masking on the SE3510 and probably the zoning on the switches to make the LUN available to another system. You'll have to check the manual for this as I don't have these commands committed to memory!
Once you can see the LUNs on the new machine, you will need to re-create the metaset using the commands that you used to create it on the Sun Cluster. As long as the partitioning hasn't changed from the default, you should get your data back intact. I assume you have a backup if things go wrong?!
Tim
---

How to get Port Classifications for Logical Switch via scvmm console

Hello All,
We are creating some automation tool based on SCVMM console scripts.
In order to create vm we need to assign port classification based on Virtual Switch and then logical switch. The problem is that I could not find any way to retrieve port classifications assigned to logical switch (Virtual Port tab in SCVMMs logical
switch properties). There is Get-SCLogicalSwitch that return just name, description and some properties. There is also Get-SCUplinkPortProfileSet which returns Uplink tab data of SCVMMs logical switch properties. But no api to retrieve port classifications
for switch. Get-SCPortClassification also doesn't return switch assignments. Any ideas how to get this data?

I think you are looking for
Get-SCVirtualNetworkAdapterPortProfileSet.
This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all risks.

Using dashboard via web console on switches

Can i see and use dashboard using http on cisco switches, if i have privilege level 7 or 8. thanks

No, I don't think you can use dashboard using http on cisco switches, if you have privilege level set to 7 or 8

Create new database in XE via GUI console

I would liek to know if it possible to create a new database in Oracle 10g Express Edition via the GUI Web console other than the existing XE database? If not, is there another way via SQL?

XE is limited to a single instance, and an instance can only open one database at a time.
You should be able to close the 'current database' (shutdown and startup nomount) and create a new database 'create database' through SQL, but I wouldn't see a lot of point to the exercise (except as a learning exercise, where you'd be better off using a Standard/Enterprise Edition).
There'd be no way to do the creation through an Apex application, as Apex itself has to run in a database so wouldn't survive the closure of the current database.

Initial load via usb, then switch to match

I have a iphone6 with 128g, and figured i can now eventually load most of my music on the phone. i know how to do this, no problem. i would however, like to switch to itunes match on my phone for future updates.
i am frequently on the road and i don't want to use my bandwidth to download songs that i can initially much easier and faster load directly from my mac at home.
i found an article that said, i should load via classic sync and then switch itunes match on, but this did just reset the content on my phone.
any idea how to do this, anything official from apple on this? i can't imagine to be the only one who has a lot of songs and changes his phone once a year ...

What do the target tables look like in terms of having the same data as the source?

Business Rule - Invalid prompt error - Security flaw?

Hello all,
I have a business rule in which users transfers volume from one cost center to another. The users have write access to sending cost centers and no access to receiving and this is how it is need. When I designed the rule and during the testing the business rule ran fine. I am pretty sure that I ran the rule successfully with a test user setup with a lower access to test the scenario. But now the rule has stopped working. It will work only if I give write acess to user to both sending and receiving cost center.
The error message is " The following value is not valid for the run time prompt it was entered for: CCName."
As far as I understand, the security controls access to objects like calc scripts. The access just gives users the rights to view/run the script but what ever is written in script, even if it outside the scope of user access, it will still get executed. I am positive that I have done this before and it worked fine.
Any ideas as to why this wont work and why the error would start popping up? Nothing has been changed in the system.

Hi Amit,
The person running the rule will need to have read access to both cost centers in order to transfer otherwise as you have seen the prompt will be invalid -- when select the prompt you should find the cost center that have no access to do not appear in the prompt itself. If you a value that the prompt does not make available then it will error out.
If you do not want to provide read access to both cost centers, you may be able to setup a multi-step process with a transfer out by a previous owner and transfer in by the new owner using a temporary cost center both have read access to -- workforce planning uses both (one step and two step) depending on how your security is provisioned.
Regards,
-John

Start managed servers via admin console

Hello,
I have installed weblogic server, created a domain, added a managed server. All working fine. Now I want to be able to start managed server through admin console.
According to this documentation (http://docs.oracle.com/cd/E13222_01/wls/docs81/adminguide/confignodemgr.html), it should all be pre-configured for development environment. But when i try start the managed server in admin console, it says "server does not have a machine associated with it." I added a machine and assigned that machine to the managed server, now it says "the Node Manager associated with machine m1 is not reachable.".
Can someone point to instructions on how to setup this on dev environment. In one of the instructions, it is suggested to change nodemanager.properties in common\nodemanager folder. But this file doesn't exist in my environment.
All i want is to start all admin and managed server with one script or with start the admin server and able to start the managed servers via console.
Thanks,

Hi,
Check from the console whether your node manager is reachable or not.
Console Path:
Machines -> <YOUR_MACHINE_NAME> -> Monitoring (tab) -> Node Manager Status (sub-tab) -> Status: Reachable
You Can follow the below link for "Node manager not reachable"
http://middlewaremagic.com/weblogic/?p=5205
Once done,check the status of the node manager.
Still even after this if the node manager is not reachable
Check the node manager logs,whether you get any exceptions
location $weblogic_home\wlserver_10.3\common\nodemanager\nodemanger.log
You can take help of the below link for trouble shooting the basic node manager exceptions.
http://middlewaremagic.com/weblogic/?p=2887
Or You can even paste the error's on this post itself,we will guide you .
Regards
FAbian

Why does screen saver prompt for secure disk image password?

Okay, seems like an odd problem, but here it goes.
I go into System Preferences->Dektop & Screen Saver. As the program "loads" availabe image sources and such I get a pop-up requesting a password to my secure disk image.
Yes, I have a secure disk image in my home directory.
Yes, the secure disk image is currently "locked" (Not mounted in finder).
I click cancel (a few times, probably 2 maybe 3 times) and things continue along fine.
I select a photo source that I want for a screen save and exit peferences.
I then go an start the screen saver (I'm using Hot-Corners).
I get the message "Looking for pictures....." for , well...basically forever...
Sure enough I touch the mouse to leave my screen saver and there is the pop-up again. Asking for me to unlock my secure
disk image.
I thought this might be related to Spotlight. I tried reading several threads and have gone as far as taking my entire hard-drive/volume
and putting it into the "Privacy" tab under spotlight.
Anybody have any idea on what is going on and how I might get it so the "Desktop & Screen Saver" stop prompting me to unlock my
secure disk image? (WITHOUT having to make sure the disk image is unlocked before I sleep my screen or open the screen saver utlity)
As always, I am only speculating that this is Spotlight related so that could be a red-herring....
thanks in advance.
OSX:10.7.3
imac/3.1G/Intel

Update: i made some progress on this issue. I found that in the ~/picture/iPhot Library/Database/ directory
there is a file called Library.apdb. This file has an entry for the secure disk image i have/had. I moved the file
to Libraryapdb.bkup and sure enough, my picture problem went away. The screen aaver panel no longer prompts
me to unlock my secure disk image.
So now the next chapter of my problem;when i open up iPhoto it wants to rebuild my photo library(which makes
sense and is what i want to haopen) so i allow it. After about 25 mins it has rebuilt the iPhoto library, but there is
one problem. The secure diskimage reference is back in the Library.apdb file that has been recreated!
So now i need to figure outnhow to get iPhoto to remove anynreference to a phot library i once had on the secure
disk image but have long since removed.
I first created an iPhoto library on my secure disk image by holding the option key and invoking iPhoto.
I removed that library awhile ago....
So how do i make iPhoto remove a no longer used iPhoto library?

Unwanted ok Prompt via Secure Console Switch?

Similar Messages

Maybe you are looking for