Unwanted screen heading(Tab) in a screen set having only one screen.

Hello Experts,
We are at the initial phase of go live of SAP Work Manger-6.0 for one of our client.
We found one strange behaviour as mentioned below.
We have one screen set(at bottom),which is part of a tile view(contains two screen sets), The screen set at bottom contains only one platform(Ipad) and only one detail screen(buttons at the bottom of the screen).
It works perfectly fine but sometimes the look and feel gets distorted, which causes an issue to the end users.
I mean, some times the screen appears as a tab with a black row and a blank yellow box(as highlighted in red in the 2nd screen). Which reduces the size of the screen and hence the buttons become very small in size.
Details :-
SMP Server-2.3 SP05
SAP Work Manger-6.0
Agentry Client-6.1.5.49 (WPF)
PFA screen shots for both the cases.
1. expected look and feel.
2. Unwanted look and feel.
We need your expert advice to resolve this issue, Please help!!
Thanks,
Sudhir.

Thank you so much Bill!!
This setting is already there.
PFA screen shot of the same setting in Agentry.
Please suggest, If you are referring any thing else.
Thanks,
Sudhir.

Similar Messages

X11 dual head - want to get window manager (gnome) on one screen only

What I want sounds simple, but I just can't get it done... Hope anyone is able to help me!
What I've got:
Four monitors (two at each of my nVidia graphic cards). Both devices are configured using nVidia's Twinview, giving me two virtual screens (:0.0 and :0.1).
I can use xinerama to get one huge desktop, but this doesn't work well, as the borders between two screens of the same device are no longer recognized in this case, causing windows to always span over two monitors on maximization.
I can also not use xinerama, giving me two independant gnome session.
What I want:
I want gnome to only start on one screen (i.e. two monitors), leaving the other screen blank but available. They don't need a WM as they will run nothing but a fullscreen mplayer or an xterm that will periodically output some stuff. I actually don't even need input devices for the second screen and it would be good if the mouse was restricted to the gnome-screen.
However, I didn't manage to make gnome start on only one screen. I don't care if it's done using one xsever with two screens attached or if I can do it starting a second xserver, I just want it resolved in some way.
I've tried to restrict gnome to :0.0 by setting the DISPLAY variable or giving gnome-sessions --display option. Both to no avail. When trying to start a second xsever (different layouts, each using one of the screens), my original screen becomes all white and on the second screen nothing happens. Any ideas?

What I want sounds simple, but I just can't get it done... Hope anyone is able to help me!
What I've got:
Four monitors (two at each of my nVidia graphic cards). Both devices are configured using nVidia's Twinview, giving me two virtual screens (:0.0 and :0.1).
I can use xinerama to get one huge desktop, but this doesn't work well, as the borders between two screens of the same device are no longer recognized in this case, causing windows to always span over two monitors on maximization.
I can also not use xinerama, giving me two independant gnome session.
What I want:
I want gnome to only start on one screen (i.e. two monitors), leaving the other screen blank but available. They don't need a WM as they will run nothing but a fullscreen mplayer or an xterm that will periodically output some stuff. I actually don't even need input devices for the second screen and it would be good if the mouse was restricted to the gnome-screen.
However, I didn't manage to make gnome start on only one screen. I don't care if it's done using one xsever with two screens attached or if I can do it starting a second xserver, I just want it resolved in some way.
I've tried to restrict gnome to :0.0 by setting the DISPLAY variable or giving gnome-sessions --display option. Both to no avail. When trying to start a second xsever (different layouts, each using one of the screens), my original screen becomes all white and on the second screen nothing happens. Any ideas?

How can I unsplit my mozilla screen? I want to see only one screen at a time!

When I open mozilla only one screen shows up. Then when I open another website from my bookmarks mozilla all of the sudden split the screen into one website and then icloud. Very frustrating. Any help would be appreciated.

I've called the big guys to help you. Good luck.
In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!

When two screens are open, how do I close only one screen?

When the site opens screen A sometimes has user open screen B. When user finishes screen B and desires to return to screen A, the x in the upper right corner is chosen, a message appears you are about to close 2 screens however user only wants screen B to close. I cannot find a way to close only screen B. How do I close only screen B?

Hi:
When you talk about ''screen A and screen B'', are you referring to tabs on the top of your screen in Firefox? Because to close those, you:
# click on the tab
# while in the tab, go to the top of it at the top of your screen
# hover over it
# you shoould now see an "x" at the rightmost side of the tab. Now click on that to only close that tab.
Were you referring to that? Thanks for your patience!

Cisco Profile 52/55 Dual - displays video on only one screen after software upgrade 7.1.4

Hi,
I've upgraded the Profile 52/55 Dual system to TC 7.1.4 and it no longer shows video on both screens during a conference. It displays content on the second screen fine. It worked in version 6 so I wonder if something changed in the software or the endpoint requires some additional configuration.
I've checked settings under Configuration > System Configuration > Video > Monitors and it's set to Dual. I've changed it few times and set it back to Dual but this didn't resolve the issue. I can't see any dual screen option key added under system information but I assume it has a dual screen option hence it's a dual screen system.
Do I need to change any settings?

Hi Patrick
Thank you very much for your response.
The system doesn’t have a remote control as such, it’s an MX700 so it has the 10inch touch panel, I had some engineers onsite attempting to bring the self-view image up using the panel but the only image that they managed to retrieve was a self-view PIP on the main image.
If I change the self-view settings in the configuration nothing appears to happen on the codec, the second monitor will only display the presentation, it’s as if the system is stuck in dual screen presentation only, even though when I set the system to dual screen, flick it back to single screen, set it to dual screen, back to the same situation no image unless there is a presentation being sent.
I have ensured that these settings are forced on the system
xconfig Video Monitors: Dual
xconfig Video CamCtrlPip CallSetup Mode: Off
xconfig Video SelfviewDefault Mode: Off
xconfig Video SelfviewDefault OnMonitorRole: Second
xconfig Video SelfviewDefault FullscreenMode: On
But no matter what I do I am unable to get the behaviour that I expect, this is why I have posted on this forum, I seem to think that the problem may be related to a software bug, however I am unable to downgrade as that would stop the control panel from working (this system doesn’t have a remote), and I see no mention of a second monitor issue reading the release notes, I have checked the online bugs and cannot find anything there either. so I am wondering if someone in Cisco has any idea as to what is happening here.
I thought about trying to use TC console to see if I could force a layout via this tool / or at least see what layouts are on the system, however the TC console version 6 will not connect to this system (I think this is more firewall related than system, as standard telnet and ssh attempts fail also).
Again I appreciate any and all assistance provided greatly, I am completely baffled as to what is happening here.
Cheers

Separate only one screen on mission control?

Is there a way to seperate just 1 of my screens from the rest in Maverick? I have 4 screens. 3 monitors are essential meant to be one large work area. I will often use a program with a canvas spread across 2 screens and one for control panels. My 4th screen is a 140" projection monitor on the other side of the room. I would love to separate ONLY the projection monitor. I can then use this monitor to watch movies on etc, and not have it effected when im switching between desktops on my other 3 screens. Seperating them all creates a huge workflow problem since i use the other 3 as one large chunk of real estate and dont want them seperated at all.
Any options here???
-Devin

No one has any idea how to do this?

Share only one screen in iMessages

I often screen share with colleagues, but they have two monitors and this makes the screen of relevance very small on my screen.
Is there any way to share just one of the screens in iMessages? Skype, for example, gives the monitor to share as an option.

Thank you digitaldog, I didn't think so either

Iphone 3gs not getting on only white screen is seen, iphone 3gs not getting on only white screen is seen

my iphone 3gs is showing only white screen. Continuous pressing of home button only voice control is enabled. Nothing except white screen is visible.Please guide it to recover.

Reset, hold both home and power buttons until the iPhone begins to start, usually takes about 10 seconds oh holding both buttons. If still problem. Try DFU Mode Restore. DFU Mode. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes. DFU Mode can be difficult to enter sometimes, just keep trying. DFU Mode is a black, blank screen with iTunes saying Recovery Mode.

How do I turn off the tab bar in FF 24 when only one window is open?

I have just updated to FF 24.0 from FF 20 with Tab Mix Plus already installed. (OSX 10.6.8) From the Firefox Preferences menu, Tabs box, I have set the "Hide the tab bar:" option to "When I have only one tab." I have also gone to the Tab Mix Plus option box and set the drop down to the same value. Unfortunately, it doesn't have the desired effect. Firefox opens to my home page with a tab at the bottom. (I prefer the tabs at the bottom and that setting still works.) With only one page open, that tab is completely unnecessary, takes up space, and just plain bugs me.
Now, here's what I have found. Once I've started Firefox, if I go to the Tab Mix Plus options box and select "Hide the tab bar: Always" and then set the option back to "When I have only one tab" I can enjoy one page without the tab bar, that is, until I've opened several tabs and then closed all but one. Then I see the tab bar stubbornly remain. An incompatibility between FF and Tab Mix Plus, perhaps. Is FF 24 not letting Tab Mix see the number of open tabs? Dunno. But I can't seem to solve it.

Are you saying that the problem lies not with Firefox but with Tab Mix Plus? Tab Mix worked up through FF 20 to my knowlege. And I see from other questions that the persistant tab bar was an issue with FF 23 as well.
Please note, that setting aside the extension issue, the Firefox preference Tab option should turn off the tab option when there is only one window open without any help from addons or extensions. I have disabled Tab Mix Plus, and set the FF option correctly, but the problem remains. As I see it, FF is not working as this user expects it to and is (slightly) broken.

Variable Data Set has only one thing but the error asks for more

Hi -
I have a PSD (CS5, Win7) where I've defines 5 layers with variable names. One of them is the Heading layer with the variable named varHeading. The Data Set I'm importing is very simple in that only the Heading layer will change. I'm gone over the construction of this text file a number of times but when I try to Import it as a Data Set I get the error:
"Could not parse the file contents as a data set. There were not enough variable names in the first line of the text file."
varHeading
"BABY CAR SEAT AECC0841"
"BABY CAR SEAT AECC0842"
"BABY CAR SEAT AECC0843"
"BABY CAR SEAT AECC0844"
"BABY CAR SEAT AECC0845"
My first question is - does the number of variables stored in the PSD file have to match the variable names in the first line of the text file??
If NOT - can someone please help me figure out what I'm doing wrong?
TIA your expert input.
j2

When you say you have defined 5 layers with variable names are you trying to attach the data set, that has one column, to each one at the same time? Did you create the data set in the Photoshop Data Sets Dialog ? The error that you are getting pops up when you have defined more variables than you have in your data set.

Changing DB character set for only one schema

We are interested in changing the characterset of only one user from Western European to AL32UTF8.
Could you please verify if the following steps will be correct to do the same.
1. Run CSScan on the one user
2. Fix any issues
3. Export that one user (with NLS_LANG set to <your old database character set>)
4. Create a new database in the AL32UTF8 character set
5. Import that one user into the new database (with NLS_LANG set to <your old database character set>)

Actually your title is a little incorrect. You are not changing CS for only one schema in existing DB which is not possible. You are trying to migrate a schema to new CS DB. Which is totally doable and your approach is mostly correct.
Database Character Set Scanner provide user scan mode
http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/ch12scanner.htm#i1006013
Mostly the issue could be data truncation, especially if you have column defined using char or varchar2 vs nchar and nvarchar2
because char/varchar is defined in bytes, AL32UTF8 is multi-bytes char set, some character of your old data could saved more than 1 bytes in new DB and can't fit into the column size.

HT3964 screen froze, then closed down. when setting up the grey screen remains on and you hear the laptop kicking over

screen froze, then closed down. when starting up again, screen remains grey and you can hear the laptop 'clicking' away?

A clicking sound can be a disk drive that's bit the dust or on it's way there.
Boot into Lion recovery mode (hold down command and r keys while booting), and use Disk Utility to repair your hard drive. Also repair permissions while you're there. If the repair hard drive completes without error, then reboot normally.
If that doesn't do it, run the Apple hardware test. Choose the extended test when prompted.
Depending what the Apple hardware test tells you will determine your next step. Hopefully your hard drive is backed up.

How to darken only one screen in a dual screen setup ??

Hi All,
I have a dual screen set-up probably like many of you and sometimes I prefer to use LR only on 1 screen. That allows me to work on Photoshop or read my emails or whatever else I'd prefer to do on the other screen. My dilemma is when in Lightroom & I press the letter L to darken the screen around my image, for better viewing, it also darkens the other screen that I'm working with. Is there a way to prevent both screens from darkening?? Thanks Ron
PS: Apologies if this has been addressed previously as I could not locate it

Thank you digitaldog, I didn't think so either

My desk top is larger than the screen, how can i make it fit all on one screen ?

My desktop does not fit on the screen. It is set to the highest resolution, but when I move the mouse to the far right or left, there is more desktop that shifts over. How do I correct this ?

Are you zoomed in at all? The default key for zooming should be Control. Hold Control and use the mouse scroll wheel (or 2 fingers on the trackpad) and zoom out. If that's not working, open System Preferences > Mouse (or Trackpad) > and set a "Zoom while holding..." default key and try it.
If that doesn't work, try using different resolutions in Display settings in System Preferences and see which one works.

Desire firefox kiosk mode where full screen allows an exit (other than ALT + F4) only one URL required for company timesheet entry. No optons. No navigation.

using win 7 x86 SP1, firefox 18 with kiosk add-in r_kiosk-0.9.0-fx.xpi . Full screen kiosk mode uses one URL to company time entry sheet. Firefox is not company standard and needs to be provided for this purpose only. We're adept at virtualized delivery via AppV and have a solution BUT.... Really like the lack of toolbars providing no option to the user. No right click, no navigation. Perfect except there's no close or exit option except keyboard stroke such as ALT+F4. I'm not talented enough to modify the XPI file to provide a full screen kiosk BUT with a close option simple enough for 3500 end users. Advice appreciated.

Thank You David. The add-on you are suggesting is exactly the kiosk add-on specified in the question. That is the one that does not have a close button. Thank You again for researching this.

Unwanted screen heading(Tab) in a screen set having only one screen.

Similar Messages

Maybe you are looking for