Unwanted summary page is printed along with print request. Why??

When I print a MS Word document, an unwanted document summary is printed first that includes Filename, Directory, Template, etc., Total Editing Time, etc. number of : words, pages. and characters.
Does anyone know how to request this special page?
Or how to shut it off?
Best regards,
CharlieM1
This question was solved.
View Solution.

Hi CharlieM1,
I understand you are getting an unexpected (and unwanted) document summary page whenever you print something from Word. Take a look a the following, Stop summary sheet from printing with document. Scroll down to the first suggestion following the question. The replier explains later in the thread that the "Office button" is just the File tab now if you are using a version of Word later than Word 2007. I hope this is helpful. Good luck and have a wonderful day.
Ryan1216
I work on behalf of HP
The advice and opinions given here are my own and not those of HP

Similar Messages

When I start mozilla or open any link in a new window I get the desired page to load but an additional new tab page opens up along with it, fix?

When I start mozilla or open any link in a new window I get the desired page to load but an additional new tab page opens up along with it. I've tried switching my homepage to different things (new tab, firefox home, show blank page) but I always get an additional new tab to open. How do I get only a single page to open?

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. 
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
'''For Firefox versions previous to 29.0:'''
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox"[[Image:Button reset]] button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
'''For Firefox 29.0 and above:'''
#Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
Now, a new tab containing your troubleshooting information should open.
#At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

When i start Firefox ( 5.0.1 ) it loads the home page fine but along with it, it starts playing a video i watched earlier on youtube and it is invisible ( no where in tabs ) and i can just hear the sound. After playing the video one time it stops.

When i start Firefox ( 5.0.1 ) it loads the home page fine but along with it, it starts playing a video i watched earlier on youtube and it is invisible ( no where in tabs ) and i can just hear the sound. After playing the video one time it stops.

Sorry you are having problems. First of all try Fifrefox's safemode.
*[[Troubleshoot Firefox issues using Safe Mode]]
If that works post back for further advice.
Next step, if safe mode did not work.
First: Try a clean install, (you have had a none standard version installed previously) that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
See
* this recent post [/questions/940399#answer-377134]
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Second: try a New Profile
*http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
* this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
**[[Back up and restore information in Firefox profiles]]
* Until you are absolutely confident about the repercussions I suggest
** always use an empty folder when creating a new profile
** never delete or rename profiles, just disable or remove shortcuts
** after creating a new test profile open it and check for any addons or plugins that may be have been included by default

When I start firefox, the Firefox 4 welcome page always opens, along with my home page.

I have a mac, am running version 10.6. I recently updated firefox to version 4.0.1.
After updating to the new version, and restarting firefox, it opened to the "welcome to version 4" page here are all the changes, etc, etc, in addition to opening my home page in a separate tab.
However, it never stopped doing that. Every time I quit firefox and restart it opens two tabs: one with the welcome page, one with my home page.
In the General tab of Preferences it still lists my correct home page as the home page. I have tried changing my homepage to a different website and to a blank page, but whenever I quit and restart it again opens the two tabs (and the homepage gets reset in my preferences back to what it was).
Any thoughts??
Thanks!

See these articles for some suggestions:
* [[Firefox has just updated tab shows each time you start Firefox]]
* [[How to set the home page]] - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved

Sound problem(earphones are okay ,checked with my pc)problem is when i listen songs on ipod,unwanted sounds along with songs is produced..so music is not cleared.How to remove these noises or unwanted sounds...pls

sound problem ..
unwanted sounds are produced continuously along with played music while listening .. earphones are ok(checked with PC)

sound problem ..
unwanted sounds are produced continuously along with played music while listening .. earphones are ok(checked with PC)

How can I download footer details along with report in excel

Hi,
I would like to download dashboard page Footer details (user details, report runtime info and page number are included in footer of dashboard page) as well along with my report, when I download into excel. How would I achieve this?
Please suggest!
Thanks,
SMA

Hi All…Thanks in Advance
I don’t understand why it's behaving so typically.
There are two things here
1. When I create a report from Answers and use the hand button (top most left) set all the details. Download then and there itself to excel it’s showing the user info even though there no such info shown with report in Answers, This is working fine.
2. However when I place the same report and enable the print, download links for the same report on dashboard page and when I try to download the report to excel it does not show me the user details even though after enabling the footer details using hand symbol of edit dashboard properties.
Here end user wants this functionality when ever he download’s the report from dashboard page (not the ad hoc report from Answers) user details should appear in his downloaded excel or something.
Reg
SMA

Attachment with leave request

Is there any provision to attach a document while an employee requests for a leave in ESS? Actually my requirement is that the employee should be able to attach a medical statement along with the request when he is applying for Sick Leave. At the same time the manager, while approving should be able to view that certificate while approving or rejecting.
Is there any functionality for this in ESS?

Actually, there *is* functionality for this....but it involves implementing HCM Processes and Forms. With that, you can have attachments....in fact, you can make them required or optional for specific steps as well as allowing them to be displayed/modified on steps after that or if you just want to display information that "yes" the attachment is there (ie. display verification but not the attachment itself). So yes, it can be done.
However, as Sid points out, with the "usual" leave request process from ESS, this is not "out of the box". This is becuase HCM Processes and Forms is based are "Case Managment" and the "old"/other way (via PCRs and custom forms) is not.
This help?

How to print the top of page part along with the ALV list and generate PDF

HI all,
         I have created one ALV by using oops concept .
         and also am able to get the top of page where I have One standard logo on the right hand side
         and some details on the left side .
           Now my requirement is to while printing the list the logo and other top of page details should appear
           In the PDF output but currently while am pressing the print preview button only the alv data is coming
          am already using the method
    handle_top_of_page
      FOR EVENT print_top_of_page
             OF cl_gui_alv_grid,
may be am missing something ... How to get the top of page along with the logo printed ?

Hi Surya,
After generating the grid display click on print button,
a spool number is generated. capture the spool number and convert it to pdf using the fm:
CONVERT_ABAPSPOOLJOB_2_PDF and save the file
Hope this will solve your problem.
Regards,
R K.

Printing Grand Totals in Footer along with page total

Hi
I have a report which prints PO Header and PO Lines. For each page while iterating thru PO Lines I print page total in the footer.
Once all PO Lines are printed with page totals in the footer of each page, I want to print Grand total in the last page in the footer along with last page total. Currently my XML data has pre-computed grand total in the PO Header block.
The problem
I have wrapped header and lines inside <?start:body?> and <?end:body?> which allows me to print page totals outside the <?end:body?> tag.
I print page totals and "Continue" next to it in the footer. But
Finally when grand total comes into picture in the outer loop I want to replace "Continue" text with grand total value in the last page and print it as footer.
I tried to use xdoxlt:set_variable() function to flag a variable value to 1 when iteration happens in HEADER block and set it to 2 in inner loop of lines block. But the scope of the variable is confined between <?start:body?> and < ?end:body? and is not visible outside the <?end:body?> tag.
The logic I want to accomplish is
if var = 1 then
print page total and "Continue"
elsif var = 2 then
print page total and Grand Total.
end if
This logic doest work as the value of var is not visible outside the body tag.
I want to use this variable value to print footer which lies outside <?end:body?> tag with grand totalor page total
Please suggest if there is any other way I can accomplish this functionality. Can we use parameter and update it. Syntax for update parameter value is not clear in user guide.
Any help would be appreciated.
thanks
sukarna

thanks for the info, i was trying to avoid this but had already reached the same conclusion.
everything else seems to be very time consuming and may not work correctly in the end.
we're on Oracle Applications : 11.5.10.2 which has just been converted to utf-8 and is an Oracle On-Demand installation.
do you know if 5.6.3 of the publisher is supported and any ideas on how difficult it is to get it installed?
cheers
ellen

I have used the "description" spot in iPhoto for in-depth additional information for photos of my ancestors. Now I am wanting to know if there is a way to print the photos along with the descriptions; either photo by photo, or maybe more than one per page

I have used the "description" spot in iPhoto for in-depth additional information for photos of my ancestors. Now I am wanting to know if there is a way to print the photos along with the descriptions; either photo by photo, or maybe more than one per page, or possibly in some sort of booklet format. Thank you very much.

You can make a Book and have a photo on one side and your text description on the other.

When I print, a last page is printed with a summary of document printed - file name, directory, ...

When I print, a last page is printed with a summary of document printed - file name, directory, ... Just got Windows 8. Is this something I can stop? Waste of paper and ink!!

Hi RebeccaQ,
Generally speaking, a summary page, document summary or document properties page is often generated based on a setting in the software application being used as opposed to the printer driver or menu setting. For example, in MS Word you can select to print this page with each printed document. In this case, depending on your version of Word, you can enable/disable the feature often in "Word Options", "Display", "Printing Options", "Print Document Properties".
Does this help? If not, which printer model and software application is being used when the summary is printed?
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Unwanted cover page with print job

When I print a document, a cover sheet prints first. It lists the filename, directory, template, title, subject, author, and more. This sheet prints with every document printed. When I wants to print more than one page, it prints before each page. How do I turn this off? It started suddenly.
I have a HP photosmart 5520 printer
wireless connection
Macbook Air with OS 10.9.5
Thanks,
Kaki

Hi @Kakikaki , and welcome to the HP Forums!
I understand you're running into print issues. I would like to help!
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend reinstalling the HP Photosmart 5520 e-All-in-One Full Feature Software and Drivers.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Print out of drawing and QA instructions along with PO

Hi Gurus,
I have a requirement of printing the material drawing and the Quality instructions along with the PO print out.
Material drawing is to be sent to the vendor and Quality inspection instructions to the stores.
I am updating these documents in the additional data of the material master under document data tab page. Every time PO is printed, these documents should also be printed.
Is there any standard functionality which meets my requirement ?
Please answer..Thanks in advance
regards
Kumar

Hi,
You have to take help of ABAP for this. It is not possible in SAP Standard.

How to NOT display header details in every page when printed with PLD

Hi All
I am printing a report of all related activities of a business partner using PLD. in the printout the header details of business partner such as name, phone details are printing in every page along with contents. how to avoid this situation printing the header details in everypage except first page?
SV Reddy

Hi,
Add a formula field to the page header. The formula field will need to contain the following text on the Content tab.
CurrentPage()
Add another formula field, once again add the following to the Content tab
Field_101=='1'
in the example above, Field_101 is the field id for the first formula field you added.
Now all you need to do is link the fields that you only want printed on the 1st page to the 2nd formula field you added.
Regards,
Adrian

Check printing in English along with Arabic language

Hi,
My requirement is to print check in English along with Arabic language.
All details in English, except vendor name, which should be in Arabic.
I am maintaining two forms one in English and 2nd in Arabic language.
2nd form which is in arabic is meant for Vendor name in arabic.
My print program flow in brief is as follows:
OPEN_FORM.
In between, after writing all the English details, i am ending the English form and then starting Arabic form and printing vendor name and ending the Arabic form.
CLOSE_FORM.
In stead of single page I am getting 2 pages as output.
Page1: English details, without Arabic name.
Page2:Vendor name alone in Arabic.
Can you please tell me how to print vendor name also on the 1st page itself along with other details in english.
Thanks & Regards
Seshagiri

Hi,
Have you got the solution to your problem? what you did?
Actually I am now have the same problem. I have to print the korean text (Customer Address which is in korean in master table). in debugging mode it is coming correct. while printing it is prnting as #. Currently i am maintaining only one form in english.
Have you maintained two forms or how you did to display the arebic?
Its urgent please reply.....
Thanx In advance

Unwanted summary page is printed along with print request. Why??

Similar Messages

Maybe you are looking for