Unwanted text from Master only shows in Preview mode

Hi, When I preview myMaster document, I see a line of text that doesn't show during Design mode. Any suggestions how to locate and delete it?
Thanks,
Ron

Hi Ron,
It is very likely the text is hidden in design view. To unhide it, please go to layers and make sure nothing is hidden there. If the "eye" icon is missing from any object in layers, then that object is hidden.
Regards,
Aish

Similar Messages

Customizing Slideshows - how do I add an image in the text box that only shows up for a specific ima

Customizing Slideshows - how do I add an image in the text box that only shows up for a specific image and not in every text box?

Can you maybe provide a screen shot to further explain your question?
Julia

Problems when I copy a text from master page field to body page field

Hello
I am developing a electronic form and I have experimented a strange bebehavior.
When I try to copy a rawvalue of listbox field from master page to textbox field in body page, this works randomly.
I have this code in the validation of the master page field
--------------------begin code---------------------
if (this.rawValue != null && this.rawValue != "")
if (xfa.form.myform.mysubform.mytextfield.rawValue != this.rawvalue)
xfa.form.myform.mysubform.mytextfield.rawValue = this.rawValue;
--------------------end code---------------------
Somebody know what is wrong?
I am very confused.
Thanks a lot for your help.
Hosting Association
The low cost quality hosting
http://www.hostingassociation.biz

Extra code is one of the pitfalls of using WYSIWYG cutting and pasting,
and using styling in general.
So while it may be interesting to try to reduce the amount of code, there
probably won't be any direct approach without extra steps to get you what
you want with bare bones code that appears as you want it to or at least acceptable.
I guess you might have to take a screen image, clip the relevant portion, since
you can only attach an image file here not a text file.
Posting a screen shot
* http://kb.mozillazine.org/Posting_a_screenshot_on_the_forum#Windows

Texting from my iPad shows my wife as the sender. Need to change identity somehow. May be problem with iCloud recognition.

I've been sending texts via iMessage from my new iPad. It is set up to send from my mobile phone number as the sender. When I send a message (even to myself) it shows my wife as the sender. When sent to myself it shows my picture as the recipient. I've checked under the messages setting and it only shows my data and phone number. However under the setting menu under contact heading the " my info" has my wife's name ( on all our devices including both iPhones, iPad, iMac, etc). Even when I log into iCloud it comes up my name but shows her picture. That is why I'm wondering if the problem is with our iCloud account. I've checked into it and only my data is included on it. W do share all our contacts via iCloud for all our devices. I cannot figure out what or how to change it so it shows me as the sender.
Any ideas?

Firstly, you need to change your details with Apple, Start here, change your country if necessary and go to manage your account. You may have already done this.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

How to remove text from photo only one layer?

How do I remove text from this photo? plz & ty
o I remove text from a photo?

Contact the person who took the photo and ask for a clean copy.
If you don't know the photographer, chances are good that your use of the photo would be a violation of copyright.

JavaScript Console Problem (only in LS preview mode)

Hello,
my JavaScript console "crashes" in preview-mode in lifecycle designer. It just appears for a "millisecond"´, well I see it flicker at last.
It doesn't matter if there is a syntax error or if I try to start the console by clicking a button ( Event click => console.show(); )
The console just flickers.
If I save the pdf file everything works fine. Console shows up on errors or if it told to do so (e.g. my button is clicked).
I cannot afford to save the pdf-file every time for some reasons (livecycle designer is used in sap gui, I have to run the whole process to get the PDF ...)
By the way, the same problem is present in Livecycle Designer if I use it "native", not called from within the sap.
I have already tried to close the acrobat reader tasks. There are two of them, when adobe reader 10 starts (native or in livecycle-preview).
But by closing one of the tasks, the second one closes, too. Therefore there is no help this way.
I use Adobe Lifecycle Designer ES 8.0 (8.01.2008.1.380548) and Acrobat Reader X (10.0.1)
The PDFs output in LS is set to Acrobat 8 (dynamic)
In Acrobat Reader javascript console/debugger is set as active, as well as to show errors etc.
It might be a problem realted to sap gui.
I just ran the pdf-preview in sap gui. And Console didn't show up again.
I have saved the same document from the sap print-preview on my local hd drive. Then started it with adobe reader and everything worked just fine.
Please do not blame sap only. As I have told before: the same problem occurs if I use livecycle designer "native", not within sap gui

nikg-fh schrieb:
it seems the problem is caused directly by adobe reader X.
I just have started a new descussion here (adobe reader forum).
If anyone could help me, feel free to do so!
my configuration:
windows xp pro
adobe reader x
adobe livecycle designer 9 ( therefore it is not an version 8 issue )
admin rights on the pc ; )
I might add that you are not alone!
I am having the same problem (LSD ES2 (version 9.0.0....) and Adobe Reader X and Acrobat Professional 8)
Whenever I save a form as PDF and open it with Reader or Acrobat I get to see the console.
But never when I view the form in Designer preview!
That used to work until I installed Reader X.
Same as you I checked all configurations in Reader and Acrobat: all perfect.
I really do hope that someone finds a solution for this.
PS. This problem should be discussed in THIS forum. It is clearly a Designer problem!

Text visibility only in Print Preview Mode & Should not come in Hard copy !

Hi All,
Is it possible to have a text which is visible only in Preview but should not come in Printed hard copy ?
Regards
Ajay

Hello,
In the FM OPEN_FORM of your print program you will be passing whether it's print preview or not in the Options parameter
i.e.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
FORM = 'Z_SAMPLE'
OPTIONS = itcpo
Just have an if statement in the SAPScript to only print this when that value = 'X' (i.e. IF &itcpo-tdpreview& eq 'X').
Regards,
Michael

Video connects but only shows local preview, not buddy

May be coincidence, but, ever since going to 10.5.6 on other Intel machines I have, this G5 machine will not show buddy video feed. I only see my feed. It takes the whole video window, not just the usual smaller preview in a corner. Audio works as expected. The 10.5.6 Intel machines seem to work normally. Connection doctor shows that video is being received and connection is 100%, I just cannot see buddy feed. Buddy's see me, I don't see them.

I am using iChat 4.0.7 on a G4/1Ghz Dual with no problems.
I see you are using an External iSight.
The Update for the camera was included in an OS update that followed the initial Firmware Update which means that it has been done.
(you can check in System Profiler > Hardware > Firewire and click on the iSight to bring up the Driver info and the like)
IS the Camera daisychained with anything ?
The iSight External doe not run at 400Mbps and will be effected by faster data streaming to other devices that are faster like Drives.
9:15 PM Saturday; January 3, 2009

Automatically copy text from "master" pdf to other pdf-files

Hi,
I have several different PDF files with formfields. Some information in those files are the same. For example the customer name etc.
In stead of writing the customer name, the date, telephone number etc. in each each single file for each single project, I would like to make a "Master" page from where the information is automatically copied to the other single files.
In Excel it is possible to link cell information from one file to another. Is it possible to do so in pdf-files too?
I am using Acrobat 9 Pro and Lifecycle ES 8.2
Thanks in advance.

You can do it using JavaScript in the PDFs

Toolbars from customize only showing in one window (Mac Snow Leopard).

Dragged several toolbar buttons from the customize window onto the toolbars in various places. None of them show up in any other window other than the one I did this in.

Well first you need to check to make sure your Mac meets the 10.8 specifications.
https://en.wikipedia.org/wiki/OS_X_Mountain_Lion
If you don't knwo what your Mac is, use the free MacTracker and then the Apple Menu > About this Mac > More informationa nd look for a model number like MacBook Pro 3,1 and use MacTracker search feature.
Next your going to have to make a copy of your existing data to a external storage drive, not TimeMachine which you currently have.
Most commonly used backup methods
When you upgrade to 10.8, your going to have a different machine anyway, so your going to be setting it up all over again. It doesn't make too much sense to restore from TM for just a few files as it takes a long time and copies over stuff from the previous owner. So it's faster and safer to just import your files manually when 10.8 is installed.
If your Mac will run 10.8, you have to realize that likely software you currently have (and is not yours) will no longer work or be there after this proceedure, it's to make sure it's all you and not someone elses.
First follow this method to erase and install 10.6 again, it's so you start clean and there are no conflicts/problems or issues as your AppleID is used to download 10.8 and any app store software is copy protected.
This way your updating 10.6.8 (Software Updated) to 10.8 on a "Fresh install" which is better than trying a upgrade.
How to erase and install Snow Leopard 10.6
Make sure your iLife package is installed (look for iPhoto and if there it is) just use the bunded app installer if you have the grey/black 10.6 disks. White 10.6.3 disks don't have iLife, so you'll be buying it from the AppStore again later with your AppleID so you can get updates for it.
Next log into App Store and download 10.8 and upgrade, you do need a fast, reliable internet connection as it's large download.

Thumb Drives Icons only shows file Previews Icon

Hello all,
I am trying to change my icons on my thumb drives and External HDDs and I have googled on how to do this which requires you to open get info and copy and paste. But when I do this I keep getting the wrong I icon I keep getting the preview Icon. I have tried different formats jpg,png,ico,also icns but I sill keep getting the preview. How can I get this to work or am I missing something ? I am new to macs so bare with me

You have to actually open the image you want to use IN Preview, select all, copy and then paste in the destination item's GetInfo window. If the item you are copying from already has a custom icon you can can copy from its GetInfo window then paste in the destination GetInfo. However, it sounds like that is not the case with the files you are attempting to use as the source.
Francine
Francine
Schwieder

Photoshop file corrupted, can open it but it only shows lines, preview looks just fine

Dear fellow photoshop users,
I got a serious problem.
today I had opened my photoshop file which I was coloring ( a comic page) I allready spend 3days on this comic and I just don't wanne start over .
I was working on it in CS6,
As friends suggested I had opened it aswell in CS5 to try if it works there but no it didn't. I also placed it in AI, but sadly again the ugly line picture shows up .
Can someone help me?
Thank you soo much

The preview is stored separately.
Yes, the file is corrupted -- you need to check your disk for other problems.
No, it is not likely to be recoverable.

Blank slide show only appears in preview mode. How do I get rid of it?

There is a blank slideshow that shows up in preview and live mode in Adobe Muse. Any ideas on how to get rid of it?

You will likely get better program help in a program forum Help with using Adobe Muse CC
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

I have two windows open, but one will only show the preview and when I try to bring it up, it won't open?

I can see the window as a little thumbnail when I hover over the firefox icon in the taskbar - & I can even change the contents, because it seems to be the 'main' window, so when I tried to change a setting in my add-ons, the add-on window opened in it, and I have no way of reaching it. When I try to click on the window to bring it up, it 'selects' and is highlighted, but it never comes up, no matter how long I wait.
I can close the window that does pop up, and the other window remains unaffected. Even manually trying to "switch over" to the window from the task manager won't work.
EDIT: I am all up-to-date, Firefox 15.0, etc.

Perhaps the PLUGIN Update feature needs to be engaged to assure that both Java and Shockwave editions are current. It requires 'Help' > 'Firefox Help' > where the lower right side displays a link for Plug-In Update...

How to do get a print from apps- only get sample preview right now

I am trying to print the blank disney pages and sudoku puzzles, but right now I only get sample previews

What kind of printer do you have ?
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Unwanted text from Master only shows in Preview mode

Similar Messages

Maybe you are looking for