Unwise.exe Files not run on Windows 8.1 SSSS

So unwise.exe Files not run on Windows 8.1 I Tried too! much but when i run it , it will not open i also tried To run as Administor but not works i am downloaded GTA San Andreas Admin console for my GTA San Andreas that one was unwise.file its not opening
what should i do?
Reply Please!

Similar Messages

HT1925 After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll can't be found, APSDaemon.exe not running". Windows 7.

After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll not found" APSDaemon.exe will not run. itunes will not now run.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I am trying to install the trial version of Acrobat but the file AdobeDownloadAssistant.exe will not run -it gives an unnumbered error that the file is not configured correctly. "This application cannot be installed...Please contact the application author

I can't install the trial version of Adobe Acrobat because the AdobeDownloadAssistant.exe will not run. I get this error:
"This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance."
I completed the trial questionnaire & all seemed well. Can anyone help?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Director 11.5 "exe" not running in windows lower version

hi,
i have some project made in director mx2004 (d10) and convert it to director 11.5 but when i publish exe it will not run on windows 2000 or windows 98 (basically lower then windows xp2), have any one idea of that
thanks

This page shows the authoring and runtime OS requirements. Unfortunately, D 11.5 isn't set up to run on Windows versions earlier than XP. You may want to keep that earlier version of your .exe and make it available to users with 2000 or 98.

HT1923 Want to uninstall iTunes and reinstall. Unable to remove Bonjour and Apple folders. Error message that they are in use. iPodService.exe is not running.

Want to uninstall and reinstall iTunes. Ran uninstall for itunes and QuickTime. Unable yo remove Bonjour and Aple program. Error message that they are in use or the folder is open, ipodservice.exe is not running.

" The feature you are trying to use is on a network resource that is unavailable. I tried to uninstall iTunes, and it would not uninstall. It gave me the following message " The path C:\documents and settings\network service\local settings\application data\apple\apple software update\iTunes.msi cannot be found.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Forms install: 90201iDS_Win32.exe is not a vaild Windows NT application.

I am trying to install Forms for evaluation (on Windows NT). I followed the instructions on http://otn.oracle.com/software/products/ids/htdocs/formssoft.html but after Step 3 got an error
dialog: "90201iDS_Win32.exe is not a vaild Windows NT application".
Does anyone have a suggestion of what I could try to get a correct install?
Thanks very much
Graeme Cavan

Are you waiting until the entire batch process has completed before running setup.exe? There should be a success message after running the batch file.
OTN

Problem extracting Acrobat XI setup.exe file - using WinRAR extractor - "Windows cannot find file...

I have downloaded Adobe Acrobat XI from my university download site (so I know it's a legit, safe copy). When I run the .exe file, even as an administrator, it begins to extract using WinRAR self-extracting archive and stops with a pop-up error:
"Windows cannot find "C:\Users\UserName\AppData\Local\Temp\RarSFX0\Adobe Acrobat XI\setup.exe"
I scanned using Malwarebytes, AVG, Spybot, and ran a \scannow command. Nothing finds a corrupt file. Any ideas what could be causing the extractor to not work?
I am running Windows 7 on a 64-bit Dell laptop.

SOLUITION - I had to actually download a version of WinRAR extractor. Right click the downloaded AcrobatXI-Windows.exe file and choose "Open with WinRAR" (this option was not available until I downloaded the WinRAR application - apparently the extractor runs automatically but doesn't have full funtionality). Then I nagivated to the Adobe Acrobat folder in the WinRAR window and selected the setup.exe file to run. It opened and installed beautifully.

Forms 6i setup.exe will not run

I am trying to uninstall Forms 6i from a PC (Windows XP) and the manual recommends doing it via the installer.
However the installer (setup.exe) will not run. No error message, control just returns after double click.
I am pretty sure this was how we originally installed Forms 6i but for some reason it does not run now.
Tried a couple of things like turning DEP off, to no effect.
Anybody has an idea where the problem is?
Or should I just uninstall the hard way by deleting the folders and cleaning up the registry manually

Hai,
In The Properties of the setup file, there is a Tab Named Compatibility. In that tick the Run this program in compatibility mode for:
and select the latest Operating system listed in the Combo box. (Eg: Windows 2000).
and Press OK.
then it will work.
Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks.

FAIL: process disp+work.EXE Dispatcher not running

Hi All,
I've reinstalled OS and installed NW 7.01 ABAP Trial. The installation is fine (no error). At the time I "start application server" through "SAP NW 7.01 ABAP Trial Version => NSP => Start Application Server", it shows the error on command dos window as below:
===================================================
============== Starting System NSP ================
===================================================
=============== Starting database instance ...
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
The MaxDB Database Starter, Version 7.7.04.23
Copyright 2000-2008 by SAP AG
OK
============== Starting ABAP instance ...
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
12.10.2008 12:25:40
Start
OK
12.10.2008 12:25:50
StartWait
FAIL: process disp+work.EXE Dispatcher not running
============== Start operation timed out !
Press any key to continue . . .
Please help me out,
Peerasit

Clean uninstall and delete 'sapdb; and 'SAP' folders. Then reinstall again.

Runtime engine memory increase when .exe is not running.

Hi,
I have built a stand alone application that on launch will pop up it's front panel, and wait for the user to click the run button.
If i look in Task Manager, i see the .exe is present and has memory allocated to it.
If i do nothing (do not click the run button), and leave the application window open, the memory allocated (as seen in Task Manager) increases (about 3mb over 24 hrs). -note, the .exe is not actually 'running' my code, as the run button has not been clicked.
1, is this normal?
2, is there anything i can do to stop it?
3, is this down to my coding? (-would seem not as my part of the .exe does not run until the run button is clicked by the user?)
I do not have experience with memory & windows handling of it.
I understand the concept of a memory 'leak' -increasing memory due to continually incremented arrays etc.
Note, i am running the Execution Trace Toolkit, and it is enabled in the .exe.
LV 2011, SP1, WIn XP. (going to upgrade soon, but have held it static as a dev platform...)
Suggestions welcome...
Thanks.

BlueTwo wrote:
1, is this normal?
No it is not. An application needing to click run before it works, is not normal. Open Microsoft Word, does it run? Do you need to click a run button? Other programs do not behave like this and neither should yours.
That being said I don't think this memory increasing by not running is normal, but I have never seen it and maybe that's because my program is either running or not. It is never in limbo where it is running but not doing anything.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

SPUCWORKERPROCESS.EXE is not running message when debugging workflow on Sharepoint 2013

When I launch my workflow from Visual studio 2013 I get an error saying "Unable to attach. SPUCWORKERPROCESS.EXE is not running".
I verified that "Microsoft SharePoint Foundation Sandboxed Code Service " is running in Central Administration"
I pass these commands from powershell:
$acl = Get-Acl HKLM:\System\CurrentControlSet\Control\ComputerName
$person = [System.Security.Principal.NTAccount]"Users"
$access = [System.Security.AccessControl.RegistryRights]::FullControl
$inheritance = [System.Security.AccessControl.InheritanceFlags]"ContainerInherit, ObjectInherit"
$propagation = [System.Security.AccessControl.PropagationFlags]::None
$type = [System.Security.AccessControl.AccessControlType]::Allow
$rule = New-Object System.Security.AccessControl.RegistryAccessRule($person, $access, $inheritance, $propagation, $type)
$acl.AddAccessRule($rule)
Set-Acl HKLM:\System\CurrentControlSet\Control\ComputerName $acl
And I run Visual Studio 2013 as Administrator.
Effectively when I look in Task Manager there is no SPUCWORKERPROCESS.EXE but a lot of SPUCWORKERPROCESSPROXY.EXE.
My environnement developpement is a single Windows Server 2012 R2 as Domain Controler with Sharepoint 2013 SP1 and February 2015 Cumulative Updates. Visual Studio 2013 Update 4.
Any idea

Hi,
Per my understanding, there is an issue when deploying a workflow solution from Visual Studio.
I suggest you check the ULS logs to collect more information for troubleshooting this issue.
About how to check the ULS logs:
http://blogs.technet.com/b/fesiro/archive/2013/11/11/sharepoint-logging-and-troubleshooting-using-ulsviewer.aspx
http://blogs.c5insight.com/Home/tabid/40/entryid/190/All-About-SharePoint-2010-ULS-Logging.aspx
Also, you can try creating an empty SharePoint project without extra customization for a test to see if the issue persists.
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

I have a dual boot system. Windows xp and Windows 7. Photoshop elements 7 would not run on Windows 7, so I purchased Elements 13. Slow as christmas. Not worth using at the speed it takes to do work on photos

I have a dual boot system, xp pro and 7 pro. Photoshop elements 7 runs fine on xp, but would not run on windows 7. Bought elements 13, Very, Very slow. To slow to work on photographs. I have bought new ram and done every other optimize ideas I have found online.
Any ideas. Asus anthlon 64 x 2, 4g ram, m2n e motherboard, NVidia video card, 2+ g processor

Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements

My office professional will not run with windows 8.1

my office professional will not run with windows 8.1 It ran fine on 7 and 8 but not 8.1

Microsoft Windows 8.1 officially supports all currently supported Microsoft Office versions including Office 2013 / 2010 / 2007 / 2003 , and may be even earlier versions unofficially. I use Microsoft Office Professional Plus on my Windows 8.1 and it runs fine with no issues. Could you try what has already been suggested by others including Big_Dave and reinstall Microsoft Office with complete reboot/restart between uninstall/new installation <restart, not shut down and start over>. If this doesn't work, please post again if installation went fine, what exactly is the error code (if any), what is the problem exactly, any screenshots ?

My JavaApplets does not run in WINDOWS XP

Java Applets do not run in windows xp internet explorer. Even I have downloaded and installed the latest version of JVM from Sun site but it does not work. Please help me in getting rid of this probelm.

do you get an error message? what happens?

Startup EXE is not running in cRIO-9002 controller

Hello all,
I have a compactRIO with NI 9002 controller. The controller has following software.
1. Labview real-time 2011
2. NI-RIO 4.0
I have made simple User LED blinking application under RT target using Labview 2011 and build EXE. But, EXE is not running after successful deployment. I have tried troubleshooting the cRIO controller using following NI knowledge base.
http://digital.ni.com/public.nsf/allkb/52E943F7D6E7C0578625720A001DDF6E
Kindly help me to solve this issue.
Solved!
Go to Solution.
Attachments:
User LED Program.zip ‏14 KB

You need to disable the SSE2 optimisation option in your build properties as you are running on a cRIO 9002, which is an older model that does not support this feature:
http://zone.ni.com/reference/en-XX/help/371361H-01/lvconcepts/sse2_caution/
Thoric (CLA, CLED, CTD and LabVIEW Champion)

Unwise.exe Files not run on Windows 8.1 SSSS

Similar Messages

Maybe you are looking for