Unzip error in step 4 of 5. Installation failing

Hi,
I am trying to install EBS R12.1.1 on my Windows XP SP3 machine. I use cygwin instead of MKS toolkit (for obvious reasons). The installation proceeds fine. It installs the DB without any problems and the whole process goes fine until step 4. Here the rapidwiz proceeds to unzip files (a total of ~1085 ). On file 285 I get an unzip error, and I am presented with two choices Retry/Cancel. When I choose retry, it says "installing appl_top driver" and then gives me another error.
I went thro the log file and found that the unzip error occurs while processing DISK2. From the looks of it, when I say "retry" in that dialog box, it skips the rest and begins the appl_top installation. Since the unzip operation was incomplete, there are no erquired files and hence the installation errors out. Given below is a relevent excrept from my log file at J:\Oracle\inst\apps\VIS_vr12\logs\. Can anyone tell me if my conclusion is correct? Or am I missing something here?
Processing Disk2....
Unzip Failed:
C:\DOCUME~1\Chase\LOCALS~1\Temp>if 1 == 0 goto :runProcess_2
C:\DOCUME~1\Chase\LOCALS~1\Temp>echo "Cannot execute install of appltop\n";
"Cannot execute install of appltop\n";
C:\DOCUME~1\Chase\LOCALS~1\Temp>if "" == "TRUE" goto :APPL_OK
Exception thrown while writing to OutputStream in TimedProcess.doFinished()
Exception - java.io.IOException: Stream closed
RW-50004: Error code received when running external process. Check log file for details.
Running APPL_TOP Install Driver for VIS instance
Please refer to the remaining logs on applications node at - J:\Oracle\inst\apps\VIS_vr12\logs\11102008.log
Processing DriverFile = M:\Stage12i\startCD\Disk1\rapidwiz\template\adriapps.drv
Running Instantiation Drivers for M:\Stage12i\startCD\Disk1\rapidwiz\template\adriapps.drv
instantiate file:
source : M:\Stage12i\startCD\Disk1\rapidwiz\template\adrunias.cmd
dest : J:\Oracle\inst\apps\VIS_vr12\temp\adrunias.cmd
backup : J:\Oracle\inst\apps\VIS_vr12\temp\adrunias.cmd to J:\Oracle\apps\apps_st\appl\admin\VIS_vr12\out\templbac\adrunias.cmd
instantiate file:
source : M:\Stage12i\startCD\Disk1\rapidwiz\template\adrunat.cmd
dest : J:\Oracle\inst\apps\VIS_vr12\temp\adrunat.cmd
backup : J:\Oracle\inst\apps\VIS_vr12\temp\adrunat.cmd to J:\Oracle\apps\apps_st\appl\admin\VIS_vr12\out\templbac\adrunat.cmd
Step 0 of 5
Command: J:\Oracle\inst\apps\VIS_vr12\temp\adrunias.cmd
Processing Step 3 of 5
Step 1 of 5
Command: J:\Oracle\inst\apps\VIS_vr12\temp\adrunat.cmd
Processing Step 4 of 5
Executing: J:\Oracle\inst\apps\VIS_vr12\temp\adrunat.cmd
Regards,
Jithin

Hi Jithin;
I found out that the two files missing were..
oraAppDB\Disk3\data\stage\data_dat1131.zip
oraApps\Disk2\appl\stage\msc72.zipYou checked other Disk for corruption?
In order to get these I need to re-download two different DVDs. I'm on a 256kbps connection and the e-delivery site doesn't support resume feture. In the past few days I have tried atleast 10 times and at no awail. Is there any other way in which I can get these two files? These are very small files ~3 MB and may be if someone has a working staging area, would they be able to share these two fine? Anyone?You can get those file or DVD's from your local oracle office
Regard
Helios

Similar Messages

  • Error message: "Adobe Application Manager "Installer failed to initialize. Please download Adobe Support Advisor to detect the problem". When following the link, Adobe Support Advisor has been discontinued 'because their products are now so stable. -I can

    I receive a message when trying to open Photoshop CS6, Illustrator CS6, etc., then when I try to follow the directions for troubleshooting, the installer fails to initialize.
    Error message: "Adobe Application Manager is needed to resolve this problem. However it is missing or damaged". Then, after download, the program fails to load and displays this message:  "Installer failed to initialize. Please download Adobe Support Advisor to detect the problem". When following the link, Adobe Support Advisor has been discontinued 'because their products are now so stable. -I can see how stable they are.. How do I get assistance with Installer issues?
    Any helpful thoughts?

    Hi David,
    Kindly try out the steps in the below mentioned link to install Creative Cloud.
    Error: "Installer failed to initialize" | Windows
    Thanks,
    Atul Saini

  • Critical Error : CUCM 9.1.2 Installation failed with return-code 256

    Hi all,
    The installation aborted with the following error message, any ideas on why this could happen? How can I access the mentioned path? How can I get the dump logs?

    I too hit this error.  I have  a customer that has a current 8.6(2) install, and wants to upgrade to 10.5.  We are doing this on a UCS C260 server.
    We were attempting to load this on the 10.5 OVA.  After looking over the thread above, I noted the adapter type change made by manuelmtzdominguez.  I started looking at this, and sure enough, the adapter type is seems to be the root cause. 
    The OVA for an 8.6 machine uses an adapter type "flexible", but the adapter type on the 10.5 OVA is using VMXNET3.  On the 10.5 OVA, the only available options are VMXNET3 and E1000.  Flexible isn't an option.
    In my case, I'm simply going to install it on the 8.6 OVA, and then use Prime Deployment to run the upgrade to 10.5 (to get everything just right). 
    Moral of the story is, I guess, check the adapter types since apparently some options are not supported on older versions. 

  • Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12

    Hello,
    I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
    1. Service Pack installation failed with error code 0x800f0a12.
    2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
    Please suggest

    Please run the system update readiness tool.
    http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
    Then post the complete contents of;
    %SYSTEMROOT%\Logs\CBS\CheckSUR.log
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • The unattended installation failed while installing SQL Server 2008 R2 ????

    Hi gurus,
    I got an error while installing SQL Server 2008 R2 in Windows 2008 R2 standard 64 bit operating system.
    LOG file*
    Customized installation of SQL Server 2008R2 for SAP *
    Detailed results:
      Feature:                       Database Engine Services
      Status:                        Failed: see logs for details
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
      MSI error description:        
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
      MSI error description:        
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlWriter_Cpu64_1.log
      MSI error description:        
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
      MSI error description:        
      Configuration status:          Passed
      Feature:                       Full-Text Search
      Status:                        Failed: see logs for details
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
      MSI error description:        
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
      MSI error description:        
      Configuration status:          Passed
      Feature:                       Client Tools Connectivity
      Status:                        Failed: see logs for details
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
      MSI error description:        
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
      MSI error description:        
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
      MSI error description:        
      Configuration status:          Passed
      Feature:                       Management Tools - Complete
      Status:                        Failed: see logs for details
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
      MSI error description:        
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
      MSI error description:        
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
      MSI error description:        
      Configuration status:          Passed
      Feature:                       Management Tools - Basic
      Status:                        Failed: see logs for details
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
      MSI error description:        
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
      MSI error description:        
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
      MSI error description:        
      Configuration status:          Passed
      Feature:                       Client Tools SDK
      Status:                        Failed: see logs for details
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
      MSI error description:        
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
      MSI error description:        
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
      MSI error description:        
      Configuration status:          Passed
      Feature:                       Client Tools Backwards Compatibility
      Status:                        Failed: see logs for details
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
      MSI error description:        
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
      MSI error description:        
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
      MSI error description:        
      Configuration status:          Passed
      Feature:                       Business Intelligence Development Studio
      Status:                        Failed: see logs for details
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
      MSI error description:        
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
      MSI error description:        
      MSI status:                    Failed: see details below
      MSI error code:                0x1639
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
      MSI error description:        
      Configuration status:          Passed
    Rules with failures:
    Global rules:
    Scenario specific rules:
    Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SystemConfigurationCheck_Report.htm
    1/16/2012 10:13:34 PM
    Message Box "Installation failed"
    The unattended installation failed.
      Installation Step: The unattended installation failed.
      Return Code:       -2068052377
      Log File:          C:\Windows\SQL4SAP.log
    Check the log file above.
    See SAP note 1144459 for known issues.
    Result: vbOK
    Registry settings (2/2):
    HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{3d06c673-5e8a-41c0-b47f-3c3ca0a22e67}
    WRITE(REG_DWORD): 4
    HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{2b9034f3-b661-4d36-a5ef-60ab5a711ace}
    WRITE(REG_DWORD): 4
    1/16/2012 10:37:32 PM
    Quit script with return code 1
    Please help me out with this issue.
    REGARDS,
    Raj

    Hello Raj,
    MS SQL DB installation specific steps for SAP system is clearly documented in SAP Installation guide. Please download from SMP, read it carefully and install as mentioned in the guide.
    Hope it helps.
    Thanks,
    Siva Kumar

  • CS6 Installation Failed

    I receive an "Installation Failed ~ Your installation encountered errors..." message when attempting to install CS6 on Mac OS 10.6.8; all of the s/w and h/w requirements have been met. Any help?

    Vikrant,
    Thanks for  your fast reply. Actually, there is no error code give. Instead, there are some troubleshooting steps given below:
    "Installer failed to initialize. This could be due to a missing file.
    More troubleshooting tips:
    1. Restart your computer.
    2. Exit all applications including startup items, virus checking ~
    3. Launch the installer and reinstall your applications. "
    This is all the only info supplied.
    Kevin

  • Photoshop 6 failed to reinstall-installer failed??? mac

    i keep getting installer failed to initialize-what do i do?

    Hi Swordfish240455,
    Welcome to the Community!
    The error you are receiving is a generic error and reason can be anything, we'll have to check the log files however try few basic steps first:
    1) Restart the computer and retry installation
    2) Download new Creative cloud desktop app via https://creative.adobe.com/products/creative-cloud and retry installation.
    2) If that doesn't work then go through this link and follow the steps mentioned under Installer failed to initialize: http://helpx.adobe.com/creative-suite/kb/troubleshoot-error-messages-bootstrapper-cs5.html
    Thanks!
    Ankit

  • I purchased and downloaded Photoshop Elements 13, but the installer fails to initialise. How do I get it to work?

    I have Photoshop Elements 10 and Premier Elements 10 installed on my PC. Both were installed from discs that I bought a few years ago. I recently purchased the upgrade (by download) for both applications to version 13. In accordance with the (scant) instructions received by email, I downloaded the four files required from the Adobe site. I subsequently ran the .exe files, which in turn created directories on my PC, including set-up.exe files for both applications. When I run the setup files, I get an error message stating that the installer failed to initialise. The error message advised me to download the Adobe Support Advisor to detect the problem. That tool does not exist. I then sought assistance from the Abobe support site, initially using the hyperlink suggestions, which were of no use, then using the chat function. The operator kept trying to get me to do something with something called 'Creative Cloud'; which I am not familiar with, and do not use. He then instructed me to download and run a CS5 cleaner tool; however, none of the choices offered by that tool include my issue, or either Photoshop Elements or Premier Elements. I am reluctant to uninstall version 10 of the programs in case I end up losing the lot and therefore wasting even more money than the purchase price for this upgrade.
    All I want to do is upgrade my two applications from version 10 to version 13. I have paid the requisite fee but it clearly does not work. I appear to have totally wasted my money. Can anyone please tell me how to get it to work? I do not want to have anything to do with the so-called ‘Creative Cloud’ as I have no idea what it is, and I do not want to lose what I already have (and have paid for previously).
    I have tried for a few days to access the so-called 24/7 chat assistance but appeared to have been locked out as every time I try to access it, I get a message that the (24/7) chat is closed. Adobe has taken my money for a product that does not work, and also refuse to help me fix it.
    I am very frustrated with a product I bought that does not work, and a 24/7 support service that clearly is not 24/7, and which refuses to assist me. Can anyone PLEASE tell me how to get this to work? Rod.

    Hi,
    Can you please share the logs?
    You can use the Adobe  Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
    Thanks,
    Shikha

  • Hypervisor installation fails after three attempts to complete

    My attempts to add the Hypervisor role to a Server 2008 R2 installation on a Dell PowerEdge 310 with a perc 6i/700 raid controller, ends after three reboots with the message, "Three attempts to complete the installation have failed. The installation will
    not be attempted again. Please restart the server and try to install the roles, services or feature again." When I add the role again, I get the same error message after three reboots. The installer retracts the installation so there is no role to remove.
    I succeeded in installing the dedicated hyper-V server on this exact machine and set up several virtual machines so I doubt there is a hardware incompatibility with the hypervisor role. I succeeded in adding the Hyper-V role on another server (Dell T110)
    from the same download of the installation files so I doubt the download is corrupt. The successful installation required 2 reboots. I don't see anything in the ServerManager log that indicates what the problem is.
    During the reboot there are things that are supposed to happen, is there a way to find the list and track the activity before I have access to the operating system? I'm feeling there is something minor that's blocking the installation and if anyone has hints
    to try I'd appreciate hearing them.
    Thanks

    I disabled the two drivers and tried to install the Hyper-V roll again. I set Process Monitor to record the boot action during the re-boot during which the error messages appear. The installation failed and about the time the failure message appeared, There
    are a lot of "Results" of "Buffer Too Small" or "Buffer Overflow" in reference to registry entries. Some registry entries refer to AMD64 which is not this computer, this has an Intel processor.
    These are two sequential Process Monitor entries:
    1214448    3:26:18.8703957 PM    TrustedInstaller.exe    992    RegQueryValue    HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\SideBySide\Winners\amd64_microsoft-hyper-v-vstack-synthnic_31bf3856ad364e35_none_c32726034e5ef98f\6.1\(Default)   
    BUFFER TOO SMALL    Length: 0
    the failure is usually followed by an identical entry:
    1214449    3:26:18.8704093 PM    TrustedInstaller.exe    992    RegQueryValue    HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\SideBySide\Winners\amd64_microsoft-hyper-v-vstack-synthnic_31bf3856ad364e35_none_c32726034e5ef98f\6.1\(Default)   
    SUCCESS    Type: REG_SZ, Length: 30, Data: 6.1.7601.17514
    This is getting way more interesting than I want to see!

  • Adobe AIR 14 Beta unzip error

    Adobe AIR 14 Beta(May 6, 2014) unzip error.
    7-ZIP shows:
    CRC failed in "runtimes\air-captive\win\Adobe AIR\Versions\1.0\Adobe AIR.dll" File is broken.

    We acknowledge the problem, and apologize you're running into this, it will soon be resolved. Thanks for reporting.
    -Thanks
    Pahup
    Adobe AIR Team

  • Photoshop Element 10 on Mac installation failed

    I am using Akamai Net Session installer to install my upgrade from PSE 6 to PSE 10 on Mac OS 10.7.2 - after almost completing the installation the following error message show up:
    The installation failed:
    The Installer encountered an error that caused the installation to fail. Contact the osoftware manufacturer for assistance.
    I tried to restart and reinstall to no avial...
    What to do ?
    Thanks

    Hi,
    Do you see any other error messages in the "Install Failed" screen?
    Thanks

  • Cp7 win assets installer failing

    I'm having difficulty with the win assets files to download and install character images to insert in my Cap 7 application.  When I attempt to run the set-up.exe file, I receive an error message that indicates that "Installer failed to initialize.  This could be due to a missing file."  Then, I cannot load the Adobe Support Advisor to assist with troubleshooting.  Any help or guidance would be appreciated!

    Thank you for the response.  I followed the instructions above (see image below) and I receive the same message.  Other suggestions?

  • CE 7.1 sp3 installation failed in step 1: CheckDBServer...Error

    Hello,
    While trying to install CE the installation failed in Step 1. Following is the error dump:
    =====================================================
    perl: executing the following command
    C:\usr\sap\A35\home\tools\osql -E -i checkDBServer_param.txt -o version.out -r
    - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / -
    perl: command exited with status: 256
    Class[SdcHelpers]Process exit value = 256
    Class[SdcHelpers]Process exited with rc: 256
    DEBUG: rc is: 256
    ERROR: Is MSSQL DB Server running?
    class[DBHelperMssql]DWI DialogMessageID 103 set in props file
    DB Server check failed
    ERROR: Execution of step: >> CheckDBServer <<
         failed. Execution returned: RC=100
         Elapsed time:         00:00:09 [HH:mm:ss]
    Class[SdcHelpers]Process exit value = 100
    Class[SdcHelpers]Process exited with rc: 100
    ERROR: Step 'CheckDBServer' ends with rc = 100
    STEPCONTROLLER: Error while installing J2EE
    ====================================================
    My DB server is running with green status.
    Any clues in resolving this will be appreciated.
    Thanks.
    Regards,
    Gajendra.

    Hi Pankaj,
    I ran the tool but still the problem persists ;-(
    Below is the action log. Any hints from this.
    ==========================================
    ACTION: **********************************************************************
    ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
    ACTION: *                                                                    
    ACTION: * Executing Step:   CheckDBServer
    ACTION: * User:             I034771
    ACTION: * WorkingDirectory: C:\usr\sap\A35\home\temp_j2eeinst
    ACTION: * Date:             2007.12.11 14:35:44
    ACTION: * Logfile:          steps.CheckDBServer.log
    ACTION: * Property File:    C:\usr\sap\A35\home\j2eeinst.props
    ACTION: * Tool Version:     720.2.20070320012101
    ACTION: **********************************************************************
    DEBUG: Initializing Properties.
    ACTION: Initializing steps.ini
    DEBUG: Substep readen: 1
    writePropFile: C:\usr\sap\A35\home\temp_j2eeinst\checkDBServer_param.txt
    Content:
    DECLARE @sVersion VARCHAR(1000)
    SELECT @sVersion = @@VERSION
    PRINT 'version='+@sVersion
    DECLARE @sVersion2 VARCHAR(1000)
    SELECT @sVersion2 = convert(varchar(1000),serverproperty('collation'))
    PRINT 'collation='+@sVersion2
    DEBUG: Creating script file: C:\usr\sap\A35\home\temp_j2eeinst\.\temp_j2eeinst\temp_script.2.pl
    DEBUG: Creating script with command:
         C:\usr\sap\A35\home\tools\osql -E -i checkDBServer_param.txt -o version.out -r
    Start command: C:\usr\sap\A35\home\perl\bin\perl.exe C:\usr\sap\A35\home\temp_j2eeinst\.\temp_j2eeinst\temp_script.2.pl
    Execute in current working dir: C:\usr\sap\A35\home\temp_j2eeinst
    Calling: C:\usr\sap\A35\home\perl\bin\perl.exe C:\usr\sap\A35\home\temp_j2eeinst\.\temp_j2eeinst\temp_script.2.pl
    Tokenizing cmdstring...
    Start external command...
    Using parent environment...
    DEBUG: Executing Argv:
    DEBUG: Arg[0]: C:\usr\sap\A35\home\perl\bin\perl.exe
    DEBUG: Arg[1]: C:\usr\sap\A35\home\temp_j2eeinst\.\temp_j2eeinst\temp_script.2.pl
    DEBUG: Process started. Try to get Streams..
    DEBUG: Got Streams. Try to read them...
    perl: executing the following command
    C:\usr\sap\A35\home\tools\osql -E -i checkDBServer_param.txt -o version.out -r
    perl: command exited with status: 256
    Class[SdcHelpers]Process exit value = 256
    Class[SdcHelpers]Process exited with rc: 256
    DEBUG: rc is: 256
    ERROR: Is MSSQL DB Server running?
    class[DBHelperMssql]DWI DialogMessageID 103 set in props file
    DB Server check failed
    ERROR: Execution of step: >> CheckDBServer <<
         failed. Execution returned: RC=100
         Elapsed time:         00:00:10 [HH:mm:ss]
    ====================================================
    Regards,
    Gajendra.

  • What causes this message "Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7"?

    What causes error code: U44M1P7? I have rebooted my machine multiple times and continue to get the same results.

    Photoshop: Basic Troubleshooting steps to fix most issues
    ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
    SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

  • Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7

    Hello,  I need some help.  I am getting the following error just when updating my Photoshop CS6 app.   U44M1P7

    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html#TroubleshootUpda…
    Re-install on top of CS6 had to do that myself when I had perpetual CS6 installed and tried to update to Subscription version. Perpetual CS 6 13.0.1.3 Windows 13.0.6 Mac are different then 13.1.2 subscription version
    Explanations of error codes:
    U = Updater.
    44 = Install Update Error
    M1 = Automatic
    M2 = Standalone mode
    P = Patcher
    6 = Done With Errors
    7 = Installation Failed
    ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
    SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

Maybe you are looking for