Unzip files using ABAP program

Hi All,
Can anybody guide me how to Unzip a .zip file using ABAP program... Appreciate your immediate reply...
actually, my scenario is to check whether zip file is created in appl.server or not.., and if zip file created then i need to check whether its blank file or any content exist inside the file...
Thanks in advance
Bhasker

hi
good
parameters: command(236) lower case.
data: std_lines(255) occurs 0 with header line.
call function 'RFC_REMOTE_PIPE'
    destination 'SERVER_EXEC'
    exporting
      command = command
      read = 'X'
    tables
      pipedata = std_lines
    exceptions
      communication_failure = 1
      system_failure = 2.
You should put your Unix command in the command parameter. "gunzip /yourfilepath/yourfilename" works on my Unix system. Once you determine the proper Unix command, you should be set. This technique is also nice because it provides you with echos back from Unix in table std_lines. For more complex Unix activity, you may want to consider throwing together a Unix script, and calling that via this code.
reward point if helpful.
thanks
mrutyun^

Similar Messages

How to print external file using ABAP program

Hello
I want to print an external file which is located in server (
20.99.0.18\GUI\xyz\8.0QUALITY\QM_TS.DOC) .....i want to print these kind of files(which i have retrieved from table 'DRAW' field 'filep' )......i need to print these files using ABAP program.
thank you
Vikram.
Message was edited by:
Vikram Bojja

extract the data and pass to script or smartform for printing

How to execute application server file from abap program

Hi Friends,
i have a requirement to execute application server file using abap program.
i got a file directory like '/home/im3/hrintf/xxx.sh' , it's of unix file, so they want me to execute through abap program.
pls suggest me with relevant logic.
Thank you.
Regards
Ramesh M

Define the external command in SM49/SM69
Try with SXPG_CALL_SYSTEM or SXPG_COMMAND_EXECUTE
Also check this link
link:[Execute Unix Script|http://searchsap.techtarget.com/tip/0,289483,sid21_gci774071,00.html]

How to Move file / call UNIX command using ABAP Program

Hi, ABAP Guru.
I need to Cut & Paste file (Move file from one location to another location) on Network Shared Drive using ABAP program.
But I can't figured out how to do this and what ABAP Command / FM / Method (and maybe UNIX command) that being used.
Please give me the advice.
Best regard and Thank you all.
Nattapash C.

all methods for your requirements should be in class CL_GUI_FRONTEND_SERVICES

Fm or class existing for fetching xml contents from a file using abap ?

Hi,
I need to fetch an xml file in a string of type xstring. I am using class cl_gui_frontend_services=>gui_upload.
This returns me content in table format, than i am planning to conver to xstring.
Is there any better approach or any existing function module any one know of ?
thanks
Regards
Pooja

Hi Pooja,
You can try out this program to read the XML file using abap.
*& Report ZXMLTOITAB                                                 *
REPORT ZXMLTOITAB                            .
TYPE-POOLS: ixml.
TYPES: BEGIN OF t_xml_line,
          data(256) TYPE x,
        END OF t_xml_line.
DATA: l_ixml            TYPE REF TO if_ixml,
        l_streamfactory   TYPE REF TO if_ixml_stream_factory,
        l_parser          TYPE REF TO if_ixml_parser,
        l_istream         TYPE REF TO if_ixml_istream,
        l_document        TYPE REF TO if_ixml_document,
        l_node            TYPE REF TO if_ixml_node,
        l_xmldata         TYPE string.
DATA: l_elem            TYPE REF TO if_ixml_element,
        l_root_node       TYPE REF TO if_ixml_node,
        l_next_node       TYPE REF TO if_ixml_node,
        l_name            TYPE string,
        l_iterator        TYPE REF TO if_ixml_node_iterator.
DATA: l_xml_table       TYPE TABLE OF t_xml_line,
        l_xml_line        TYPE t_xml_line,
        l_xml_table_size TYPE i.
DATA: l_filename        TYPE string.
PARAMETERS: pa_file TYPE char1024 DEFAULT 'c:\temp\orders_dtd.xml'.
* Validation of XML file: Only DTD included in xml document is supported
PARAMETERS: pa_val TYPE char1 AS CHECKBOX.
START-OF-SELECTION.
*   Creating the main iXML factory
    l_ixml = cl_ixml=>create( ).
*   Creating a stream factory
    l_streamfactory = l_ixml->create_stream_factory( ).
    PERFORM get_xml_table CHANGING l_xml_table_size l_xml_table.
*   wrap the table containing the file into a stream
    l_istream = l_streamfactory->create_istream_itable( table =
l_xml_table
                                                    size =
l_xml_table_size ).
*   Creating a document
    l_document = l_ixml->create_document( ).
*   Create a Parser
    l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
                                      istream        = l_istream
                                      document       = l_document ).
*   Validate a document
    IF pa_val EQ 'X'.
      l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
    ENDIF.
*   Parse the stream
    IF l_parser->parse( ) NE 0.
      IF l_parser->num_errors( ) NE 0.
        DATA: parseerror TYPE REF TO if_ixml_parse_error,
              str        TYPE string,
              i          TYPE i,
              count      TYPE i,
              index      TYPE i.
        count = l_parser->num_errors( ).
        WRITE: count, ' parse errors have occured:'.
        index = 0.
        WHILE index < count.
          parseerror = l_parser->get_error( index = index ).
          i = parseerror->get_line( ).
          WRITE: 'line: ', i.
          i = parseerror->get_column( ).
          WRITE: 'column: ', i.
          str = parseerror->get_reason( ).
          WRITE: str.
          index = index + 1.
        ENDWHILE.
      ENDIF.
    ENDIF.
*   Process the document
    IF l_parser->is_dom_generating( ) EQ 'X'.
      PERFORM process_dom USING l_document.
    ENDIF.
*&      Form get_xml_table
FORM get_xml_table CHANGING l_xml_table_size TYPE i
                              l_xml_table      TYPE STANDARD TABLE.
*   Local variable declaration
    DATA: l_len      TYPE i,
          l_len2     TYPE i,
          l_tab      TYPE tsfixml,
          l_content TYPE string,
          l_str1     TYPE string,
          c_conv     TYPE REF TO cl_abap_conv_in_ce,
          l_itab     TYPE TABLE OF string.
    l_filename = pa_file.
*   upload a file from the client's workstation
    CALL METHOD cl_gui_frontend_services=>gui_upload
      EXPORTING
        filename   = l_filename
        filetype   = 'BIN'
      IMPORTING
        filelength = l_xml_table_size
      CHANGING
        data_tab   = l_xml_table
      EXCEPTIONS
        OTHERS     = 19.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
*   Writing the XML document to the screen
    CLEAR l_str1.
    LOOP AT l_xml_table INTO l_xml_line.
      c_conv = cl_abap_conv_in_ce=>create( input = l_xml_line-data
replacement = space ).
      c_conv->read( IMPORTING data = l_content len = l_len ).
      CONCATENATE l_str1 l_content INTO l_str1.
    ENDLOOP.
    l_str1 = l_str1+0(l_xml_table_size).
    SPLIT l_str1 AT cl_abap_char_utilities=>cr_lf INTO TABLE l_itab.
    WRITE: /.
    WRITE: /' XML File'.
    WRITE: /.
    LOOP AT l_itab INTO l_str1.
      REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>horizontal_tab
IN
        l_str1 WITH space.
      WRITE: / l_str1.
    ENDLOOP.
    WRITE: /.
ENDFORM.                    "get_xml_table
*&      Form process_dom
FORM process_dom USING document TYPE REF TO if_ixml_document.
    DATA: node      TYPE REF TO if_ixml_node,
          iterator TYPE REF TO if_ixml_node_iterator,
          nodemap   TYPE REF TO if_ixml_named_node_map,
          attr      TYPE REF TO if_ixml_node,
          name      TYPE string,
          prefix    TYPE string,
          value     TYPE string,
          indent    TYPE i,
          count     TYPE i,
          index     TYPE i.
    node ?= document.
    CHECK NOT node IS INITIAL.
    ULINE.
    WRITE: /.
    WRITE: /' DOM-TREE'.
    WRITE: /.
    IF node IS INITIAL. EXIT. ENDIF.
*   create a node iterator
    iterator = node->create_iterator( ).
*   get current node
    node = iterator->get_next( ).
*   loop over all nodes
    WHILE NOT node IS INITIAL.
      indent = node->get_height( ) * 2.
      indent = indent + 20.
      CASE node->get_type( ).
        WHEN if_ixml_node=>co_node_element.
*         element node
          name    = node->get_name( ).
          nodemap = node->get_attributes( ).
          WRITE: / 'ELEMENT :'.
          WRITE: AT indent name COLOR COL_POSITIVE INVERSE.
          IF NOT nodemap IS INITIAL.
*           attributes
            count = nodemap->get_length( ).
            DO count TIMES.
              index = sy-index - 1.
              attr   = nodemap->get_item( index ).
              name   = attr->get_name( ).
              prefix = attr->get_namespace_prefix( ).
              value = attr->get_value( ).
              WRITE: / 'ATTRIBUTE:'.
              WRITE: AT indent name COLOR COL_HEADING INVERSE, '=',
                               value COLOR COL_TOTAL   INVERSE.
            ENDDO.
          ENDIF.
        WHEN if_ixml_node=>co_node_text OR
             if_ixml_node=>co_node_cdata_section.
*         text node
          value = node->get_value( ).
          WRITE: / 'VALUE     :'.
          WRITE: AT indent value COLOR COL_GROUP INVERSE.
      ENDCASE.
*     advance to next node
      node = iterator->get_next( ).
    ENDWHILE.
ENDFORM.                    "process_dom
Regards,
Samson Rodrigues.

Rename File using ABAP

Hi,
Can any one help me how to rename file using ABAP programme.
Thanks,
ABDUR

use these function module
RS_RENAME_PROGRAM Rename Program With All Dependent Objects
RS_RENAME_PROGRAM_INCLUDE Rename Include Progam Without Any Other Objects

How to upload an excel file using ABAP.

Hi,
Can anyone please help me in understanding how to upload an excel file using ABAP.
Thanks!!

http://diocio.wordpress.com/2007/02/12/sap-upload-excel-document-into-internal-table/
check the link
TYPES: Begin of t_record,
name1 like itab-value,
name2 like itab-value,
age   like itab-value,
End of t_record.
DATA: it_record type standard table of t_record initial size 0,
wa_record type t_record.
DATA: gd_currentrow type i.
*Selection Screen Declaration
PARAMETER p_infile like rlgrap-filename.
*START OF SELECTION
call function ALSM_EXCEL_TO_INTERNAL_TABLE
exporting
filename                = p_infile
i_begin_col             = 1′
i_begin_row             = 2′ Do not require headings
i_end_col               = 14′
i_end_row               = 31′
tables
intern                  = itab
exceptions
inconsistent_parameters = 1
upload_ole              = 2
others                  = 3.
if sy-subrc <> 0.
message e010(zz) with text-001. Problem uploading Excel Spreadsheet
endif.
Sort table by rows and colums
sort itab by row col.
Get first row retrieved
read table itab index 1.
Set first row retrieved to current row
gd_currentrow = itab-row.
loop at itab.
Reset values for next row
if itab-row ne gd_currentrow.
append wa_record to it_record.
clear wa_record.
gd_currentrow = itab-row.
endif.
case itab-col.
when 0001′.                              First name
wa_record-name1 = itab-value.
when 0002′.                              Surname
wa_record-name2 = itab-value.
when 0003′.                              Age
wa_record-age   = itab-value.
endcase.
endloop.
append wa_record to it_record.
*!! Excel data is now contained within the internal table IT_RECORD
Display report data for illustration purposes
loop at it_record into wa_record.
write:/     sy-vline,
(10) wa_record-name1, sy-vline,
(10) wa_record-name2, sy-vline,
(10) wa_record-age, sy-vline.
endloop.

Is it possible to reset password for any user using abap program

Hi friends,
Is it possible to reset password for any user using abap program by specifying client number and user id. in selection screen.
if any code for that to reset password please mail me.
Thanks & Regards,
Yogesh

Hello Yogesh,
Yes you can reset the password for any body using ABAP Code. But for that you really don't need any client number.
If this process is on regular basis, then recommended is to use BAPI for changing the user details Otherwise BDC also works fine.
=> Function Module - BAPI_USER_CHANGE
Call this in the program for resetting the password.
=> CALL TRANSACTION 'SU01' USING InternalTable
This will be executed in the BDC of SU01 transaction recording. Use the Password Change button in the application toolbar of transaction while recording.
Hope this helps.
PS If the answer solves your query, plz close the thread by marking it solved and rewarding each reply.
Regards

Synchronizing Two Custom Z Tables Using Abap Program

Hi,
    My requirement is Synchronizing two custom z tables using abap program me.
I have vendors in two tables, i have to select the common vendors from first which are existing in second table also.
In first table each vendor can have more than one supplier types in one field only. In second table these supplier types are divided into
different fields.
     My requirement is I have to check supplier types in first table and i have to pass X to corresponding supplier types in second table vendor.
I have to pass X value for each depending in Second table depending upon supplier type in first table.
. How to do it can any one suggest with code.
Thanks in Advance,
Vivek
<subject edited by moderator>
Message was edited by: Manish Kumar

Hi,
Imho, you need to get (meaning, extract into separate fields) the different supplier types from Table1 first. Your key for Table1 is the vendor no, which is also the key in Table2 (or the key for Table2 is Vendor no & Type).
For better performance, better select multiple/all required entries from Table1 instead of doing a select endselect.
Depending on the format of the vendortypes in Table1, put them in a new itab (for our purpose named Table1New where vendor no & type are the only 2 fields. For example, if the type length is fixed to 2 chars, or divided by space,... use your coding accordingly.
Next step is to select all vendor no's in Table2 which you have selected in Table1. If in Table2, the vendor no is the only key (and the all vendor types are filled in a single record), then loop check the vendor types from Table1New against the types in Table2.
If the key of Table2 is vendor no & vendor type, then do a read table for the key.
The logic in pseudo-code:
Select from Table1 into table. If you'd like to limit the selection size, add package size statement.
     extract the vendor types in to itab Table1New.
     Select the vendor & types from Table2 by using the for all entries option (better performance).
     loop at Table1New
          check in Table2:
               if the unique key is vendor no: check all fields for the vendor type from Table1New
               if the unique key combo is vendor no & type: check by using a read table.
          If not found => add entry to Table2
     endloop.
endselect Table1 (when using package size)
I guess the most difficult step is to extract the types from Table1 into separate fields, all the rest seems straight forward. Please keep in mind the itab type definitions for a better performance.
Good luck!
Best regards,
Zhou

Fork in process chain using ABAP program

Hello everyone.
I need a fork in my chain. Depending on the values in some db table I will make a decision: do some process or skip and go further. The only solution I can see is using ABAP program. But unfortunately It doesn't return status. Any suggestion will be appreciated.

Hi,
You have few process to run after the abap program. So make all those process as a different chain, and at the end of the ABAP program include a function module to trigger this chain, based on your condition.
If you like this idea, please revert for more information.
Hope this helps.
Thank you,

Access table using ABAP program in other database

Dear SAP Expert,
We have requirement that related to SAP interface.
Our SAP system run on Oracle database 11g (Unix).
Illustration: SAP system = A non SAP system = B
We need to access a table using ABAP program (from SAP system A) in other database (system B) that are not necessarily SAP database. The non-SAP system using SQL Server 2008 (Windows).
What is the best practice for this interface
Do we need database link? If yes, please help to inform me the details step to configure it.
Thanks and Regards

Hi Friend,
You try using an intermediate system..passing your input required to fetch the data..and PI should call the respective query to retrive record..once the full flow is completed you should get the return through some table in the calling program.
else.
ask the other system guy to write a function with select query and ask him to expose as RFC and that RFC we have to call it as RFC in our program to get the required values and only thing we need here is a proper connector in place.
Regards
S.Janagar

When extract omni.ja file using winrar program give me that file is corrupted for version 17.0.2 windows and language is EN-US ?

i need to update and set default bookmarks show always when install firefox
when update omni.ja file i do this steps :
Steps to change “Bookmarks.html” file in “omni.ja”:
- Copy “omni.ja” file and change the prefix of the file to “zip” so that you can extract it using WinRAR program, then extract the file.
- Make the changes you want to the extracted files.
- Open the original “omni.ja” file using WinRAR program.
- Using “Add” button to replace the modified files.
the first step when extart the file it's give me that file is corrupted only for this version (firefox 17.0.2 windows EN-US)

There is no need to edit files in the omni.ja! archives to achieve this.
*http://mike.kaply.com/2013/05/06/dont-unpack-and-repack-omni-jar/
*http://mike.kaply.com/2012/03/26/customizing-firefox-distribution-ini/
If you need to initialize specific files in a new profile then create a template folder in the Firefox program folder (C:\Program Files\Mozilla Firefox\browser\defaults\profile\) and place the files in that folder.
*http://mike.kaply.com/2013/04/24/major-changes-coming-in-firefox-21/
*http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/

Can a transaction be called in background dynamically using ABAP program??

Hi Experts,
Can a transaction be called in background dynamically using ABAP program without BDC???
Regards,
Mansi.

u can create job dynamically through programming..Try this sample code..
data: jobname like tbtcjob-jobname value
                             ' TRANSFER TRANSLATION'.
data: jobcount like tbtcjob-jobcount,
      host like msxxlist-host.
data: begin of starttime.
        include structure tbtcstrt.
data: end of starttime.
data: starttimeimmediate like btch0000-char1.
Job open
call function 'JOB_OPEN'
       exporting
            delanfrep        = ' '
            jobgroup         = ' '
            jobname          = jobname
            sdlstrtdt        = sy-datum
            sdlstrttm        = sy-uzeit
       importing
            jobcount         = jobcount
       exceptions
            cant_create_job = 01
            invalid_job_data = 02
            jobname_missing = 03.
if sy-subrc ne 0.
                                       "error processing
endif.
Insert process into job
SUBMIT zreport and return               << Here it is a static call but u can make it dynamic
                with p_param1 = 'value'
                with p_param2 = 'value'
                user sy-uname
                via job jobname
                number jobcount.
if sy-subrc > 0.
                                       "error processing
endif.
Close job
starttime-sdlstrtdt = sy-datum + 1.
starttime-sdlstrttm = '220000'.
call function 'JOB_CLOSE'
       exporting
            event_id             = starttime-eventid
            event_param          = starttime-eventparm
            event_periodic       = starttime-periodic
            jobcount             = jobcount
            jobname              = jobname
            laststrtdt           = starttime-laststrtdt
            laststrttm           = starttime-laststrttm
            prddays              = 1
            prdhours             = 0
            prdmins              = 0
            prdmonths            = 0
            prdweeks             = 0
            sdlstrtdt            = starttime-sdlstrtdt
            sdlstrttm            = starttime-sdlstrttm
            strtimmed            = starttimeimmediate
            targetsystem         = host
       exceptions
            cant_start_immediate = 01
            invalid_startdate    = 02
            jobname_missing      = 03
            job_close_failed     = 04
            job_nosteps          = 05
            job_notex            = 06
            lock_failed          = 07
            others               = 99.
if sy-subrc eq 0.
                                       "error processing
endif.
Regards,
JOy.

HOW TO creat BAR CHART using ABAP Programming

DEAR ALL,
I want some help as to how to creat GRAPHICAL display using ABAP programing (BAR CHART) any sample codes Example will be very helpful.
Regards,
VJ

On earlier versions, you can do something like this.
[code]
REPORT ZRICH_0005 .
DATA: BEGIN OF ITAB_DATA OCCURS 0,
           DATANAME(15),
           QUANTITY1 TYPE I,
           QUANTITY2 TYPE I,
           QUANTITY3 TYPE I,
      END OF ITAB_DATA.
Data: BEGIN OF ITAB_OPTIONS OCCURS 0,
           OPTION(20),
      END OF ITAB_OPTIONS.
ITAB_DATA-DATANAME = 'Maple'.
ITAB_DATA-QUANTITY1 = 5500.
ITAB_DATA-QUANTITY2 = 6200.
ITAB_DATA-QUANTITY3 = 5900.
APPEND ITAB_DATA.
ITAB_DATA-DATANAME = 'Oak'.
ITAB_DATA-QUANTITY1 = 3500.
ITAB_DATA-QUANTITY2 = 5200.
ITAB_DATA-QUANTITY3 = 4400.
APPEND ITAB_DATA.
ITAB_DATA-DATANAME = 'Cherry'.
ITAB_DATA-QUANTITY1 = 1800.
ITAB_DATA-QUANTITY2 = 2200.
ITAB_DATA-QUANTITY3 = 1900.
APPEND ITAB_DATA.
CALL FUNCTION 'GRAPH_MATRIX_3D'
     EXPORTING
          COL1        = 'Jan'
          COL2        = 'Feb'
          COL3        = 'Mar'
          TITL        = 'Lumber Usage in $'
     TABLES
          DATA        = ITAB_DATA
          OPTS        = ITAB_OPTIONS
     EXCEPTIONS
          OTHERS      = 1.
[/code]
Regards,
Rich Heilman

HOW CAN I ADD NEW WORKSHEET(TAB) TO EXCEL USING ABAP pROGRAM?

i want to add new tabs to my excel file using abap.... can someone help me on this?

hi,
PERFORM add_worksheet USING 'Test 1'.
*& Form ADD_WORKSHEET
FORM add_worksheet USING i_name.
Add new worksheet
IF g_first_ws <> 'N'.
    g_first_ws = 'N'.
    GET PROPERTY OF g_excel 'ACTIVESHEET' = g_worksheet.
ELSE.
    CALL METHOD OF g_worksheets 'Add' = g_worksheet.
ENDIF.
SET PROPERTY OF g_worksheet 'NAME' = i_name.
g_row = 1.
g_col = 1.
ENDFORM. " ADD_WORKSHEET

Unzip files using ABAP program

Similar Messages

Maybe you are looking for