Unzip OBIEE 11.1.1.3 win32 ERROR file corrupt

Hello!
I downloaded all 4 ZIP files for 11.1.1..3 win 32bit version, and I can't unzip file:
bi_windows_x86_111130_32_disk1_2of2.zip
When getting to last file:
../bishiphome/Disk2/stage/Components/oracle.bi.xdo/11.1.1.3.0/1/dataFiles/filegroup1.jar
it sends message: CRC failed, file is corrupt
Any idea where to get correct ZIP or what's wrong?
Tnx
Gorazd

Hi All,
just to inform you that even if now I'm able to unzip correctly Disk2, I tried to install BI11g twice with the same error during the installation steps.
Step 11 of 12: the executing: opmnctl start coreaaplication obiccs1 doesn't work and also the other one executing: opmnctl start coreaaplication obips1 too.
So probably there's always somethng in the file which is not properly setted up.
Any idea?
thanks

Similar Messages

Re-downloading Firefox, keep getting "error:file corrupt". won't download.

'''I recently had to restore my desktop to factory condition. I am trying to get Firefox back, but have tried to download 3 times and keep getting, "error: file corrupt". It will not download, any ideas? thanks!'''

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
You can try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See http://kb.mozillazine.org/Unable_to_save_or_download_files

File corrupt error

Hello All,
Using Adobe Mobile Packager and a swf files, i created a package for the Symbion Phones which is a self signed .sis file. When i tried installing it to the phone.......it gave an error "File Corrupt Error" .
Any guesses for the error?????
Also, the .swf file was created using CS3 suite. I don't know if this is a silly question........but can Adobe Mobile packager create package for swf files created using CS3........or is it only for .....CS4???????
Would appreicate all replies or any kind of help for this issue.
Thanks and Regards
H.R.

I don't use adobe mobile packager for this purpose; however there are some basic things to worry about during packaging so that your file won't be corrupted:
1> Did you Entered Correct UID order for an edition (2nd or 3rd Editions)?
2> Did you create .key and .cer files ? (key and certificate) ?
3> Did your Swf run normally in the mobile phone before packaging ?
4> Did you make sure you entered a valid path for your application to be installed during extraction ?

E71 sis files installation error msg "file corrupt...

I have an e71 purchased 2 months ago which was working fine until i did tried to install nokia maps updater. After that whichever sis file i try to install i get an error 'file corrupted'. How to rectify

But for doing a hard reset you should do this-
Before perfoming this please take a backup of your data.
Factory defaults-
Type *#7780# on your standby screen.
This will reset all your setting to default factory settings. User data wont be affected.
Soft reset-
Type *#7370#
This will reset the phone as well delete user data. Use when want to format the phone.
If none of these worked then you might want to do a hard reset.
For this you have to-
1. Switch off the phone.
2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.( Just in case of N78 it will be the multimedia key the small silver key on right side & for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. For Nokia N97 is SHIFT /SPACE BAR / BACKSPACE. )
3. While holding these buttons, hold the power button to switch on the phone.
4. Release the buttons when the phone shows the nokia hands logo or shows other signs of life like the language selection screen.
Please thank me by giving 'KUDOS' star. It will help me to serve you better.
Currently using N82 and 5230. Next would be N?

Nokia E-51 giving file corrupt error.

PLEASE HELP ME!!!
I am having a Nokia E-51 and the firmware is 220.34.37 / 20-10-2008 / RM-244 / Nokia E51(16).
Yesterday my phone got hanged and was not booting after removing batteries for an hour.
I read forums and decided to perform Hard Format.
I was sucessful.
THEN I restored Phone Backup from Memory Card which did not succeded 100% nearly 60-70% phone was restored.
I then tried to install all the remaining software from my own, but when ever I try to install softwares including gmail, google maps etc. is it stoping by an error "File Corrupt".
Please help me what has to be done.
Please reply and oblige.
Jagdish

Hi,
The intention of these boards are for individual users such as yourself to share their opinions and assist each other. These forums are mainly for user-to-user support.
The moderators are only here to moderate and we will not be able to provide any assistance.
If you would like to receive assistance from Nokia, you can use the "Contact Us" link at the top of the page and then, select your country in the section "Call or Email Nokia Care".
Yes, there are Nokia employees who participate in this community. However, they participate voluntarily and they are not obligated to respond to any posts or to look into any specific issues that are discussed here. For more information about the Nokia employee's role, read this post:
http://discussions.nokia-asia.com/discussions/board/message?board.id=news&thread.id=846
Regards,
Concordia
~*~ New to Nokia Support Discussions? ~*~
You may want to have a look at the guidelines!

I::001 Win32 error 2 while using document bapi methods

Dear colleagues,
I'm using SAP .NET Connector for integration between .NET application and SAP System.
When I try to work with standard document bapi methods like BAPI_DOCUMENT_CREATE (with defined filepath for a document in file table parameter), BAPI_DOCUMENT_CHECKIN or BAPI_DOCUMENT_CHECKOUTVIEW, I get an error in out RETURN parameter - "I::001 Win32 error 2: The system cannot find the file spe".
When file path is not defined in BAPI_DOCUMENT_CREATE everything works OK and information about the document successfully appears in SAP system.
When I test BAPI_DOCUMENT_CREATE or BAPI_DOCUMENT_CHECKOUTVIEW in SAP GUI with same parameters, RETURN parameter shows no errors.
Does anybody know what can be a reason of this problem? Please, help if you know how to solve this issue.
If this forum is not a right place for such question. please tell me, where I can get any information about this issue.
Best regards,
Andrey Kim

Hello, Yann ) Of course, I can find another way, but for a few reasons I need to use these standard bapi methods for checkin and checkout documents. I want to investigate, what am I doing wrong here)
I've found the reason of this stupid error - I just didn't know SAPHTTP.exe and SAPFTP.exe files should be copied to system32 or application's bin folder. After doing that this error disappeared.
But then I've got another error, which was exactly described in https://service.sap.com/sap/support/notes/885058
I receive an error message from SAP when I'm trying to call bapi_document_checkin or bapi_document_checkoutview methods.
I've copied last versions of librfc32.dll, librfc32u.dll and ICU libraries to my windows\system32 folder and to my application's bin folder also, but I still receive the same error message
I didn't work with SAP before, so that is my first experience. Can anybody help or explain, what exactly should I do with RFC and ICU libraries to avoid this error?
Is it necessary that rfc libs' versions on my client machine were the same as rfc lib's on the machine with SAP system?
I'll be grateful for any assistance in this question.

Win32 error: 3 The system cannot find the path specified

I am trying to copy important folders from T420 (Win 7 64) to external hard drive and I am sporadically getting " Win32 error: 3 The system cannot find the path specified" for certain files, as well as an error when windows is reporting that the file name is too long, which is probably not the case (the longest ones with spaces are about 70 characters).
What is the issue and how to solve it (how to copy/backup these folders to external hard drive)?
Many thanks

I had a similar issue - couldn't make any files available offline.
I found that the offline folder service would not start
This was because the CSC permission were totally screwed. I had to take ownership of each folder and file, one by one, then grant everyone full access.
then delete the full contents of the CSC folder
format the CSC database using the registry fix then reboot
in control panel, disable the offline files, reboot, then re-enable. and now its working :)
2hrs to resolve this, with grateful thanks to this thread and some others.
damn windows8

Issues distributing packages and receiving Win32 Error = 0

Within the last month or so, we've been experiencing issues distributing various packages to our DP's. There doesn't seem to be any rhyme or reason to it; it can be any combination of packages and DP's.
We've noticed that just before the Win32 error occurs, the following 4 lines usually precede the error:
UpdateStagedFile failed; 0x80070040
UpdateStagedFolderRdc failed; 0x80070040
UpdateStagedFolderRdc failed; 0x80070040
UpdateStagedFolderRdcW failed; 0x80070040
We've had an open ticket with MS for over a week now, but there hasn't been any progress.
Any light you guys could shed on this would be greatly appreciated!

This is a known issue for SCCM 2012. A official fix will be released in the near future. If you want to test instantly, contact CSS to open a case to get a test fix.
There is a KB for this issue (English not available currently)
http://support.microsoft.com/kb/2927111/fr
Juke Chou
TechNet Community Support

Win32 error code 5 -- when run ifsmount.bat

When I started the ifsstart which in turn will call ifsmount.bat internally. When I looked at the log file I found out that ifsmount.bat fail with error as "Win32 error code 5" which is "Access is denied". Do you have any idea why this problem exists? Thank you so much in advance!
Vince

The problem is solved. I need to set the user to have administrative priviliges.
Thanks!
Vince

Adprep encountered a Win32 error

2008 R2 , when i type CMD command i will get below eror,Adprep encountered a Win32 error. Eror code 0*2095 ple advice ..?

Hi,
In addition, if the user account you are using is a member of many nested groups, the problem may occur due to token size. In this case, you may choose to create a new account in Active Directory Users and computers, make the new account a member of the
Domain Admins, Enterprise Admins, and Schema Admin groups only, logon to the Schema Master as that account and rerun the Adprep /ForestPrep command.
More information for you:
Troubleshooting ADPREP Errors
http://blogs.technet.com/b/askds/archive/2008/12/15/troubleshooting-adprep-errors.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Getting a Win32 Error Code 1157

During my distribution of the TestStand engine and my application I get an Win32 Error code of 1157. The information says that it could not load my applications DLL because it could not find another DLL that is required in order to load mine. I tried this distribution on two other machines and they don't have this problem. I am running TestStand 2.0.1 and MeasurementStudio 6.0. I have had this problem before and called NI support about it and was not able to get a concise answer to the problem. Who ever I talked to then suggested that it could be the problem that is posted in the TS2.0.1 Readme file about the error when it can't find the OBJ file, but this is a different error code and this pertains to a DLL. Has anybody seen this p
roblem? Can anybody help?

You can't sign it because photoshop.com is dead and gone, and any photos there are moved to revel, which you can't access through PSE versions prior to PSE 11. You should have received a bunch of emails about this back when it was happening.
http://barbarabrundage.com/2013/09/16/pse-8-9-10-cant-sign-in-error-40 4/

OBIEE 11.1.1.7-Ago Function Error-[nQSError: 46008] Internal error: File server\Query\Optimizer\SmartScheduler\PhysicalRequestGenerator\Src\SQOSPMarkMultiTargetSupport.cpp

Hi All,
I was performing the steps mentioned in Oracle Tutorial"http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/biadmin11g_02/biadmin11g.htm#t10"-BI RPD creation.
After Using the AGO function data in the Time series metric(Month Ago Revenue) was null always. I updated the DB features in RPD physical layers by selecting support for time series functions.
After that report started to fail with below error. Please let me know if its a bug and any option to fix it.
Thanks,
Sreekanth
Error
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 46008] Internal error: File server\Query\Optimizer\SmartScheduler\PhysicalRequestGenerator\Src\SQOSPMarkMultiTargetSupport.cpp, line 1680. (HY000)
SQL Issued: SELECT 0 s_0, "Sample Sales"."Time"."Year-L1" s_1, "Sample Sales"."Revenue"."Ago-Year Revenue" s_2, "Sample Sales"."Revenue"."Revenue" s_3 FROM "Sample Sales" FETCH FIRST 65001 ROWS ONLY
Refresh

I know that there is no relation between "SampleApp Lite"."D3 Orders (Facts Attributes)"."Order Date", "SampleApp Lite"."D0 Time"."Calendar Date", it's also the same thing in my own RPD.
But as it's working with the 11.1.1.6.2 BP1 version I don't understand why it's not working with 11.1.1.6.9.
Implicit fact column is not set on my repository, but I don't have any request with only dimensional column, so if my understanding is correct I don't need to use it. Also, the problem appears during the check of the repository not in answers.
thanks anyway

Ld.so.1: java: fatal: relocation error: file :referenced symbol not found

Hello,
I am trying to run my application (using Java) on windows which in turn calls the Remote Manager on Solaris(Solaris 9 on SPARC Processor).
It gives the following linker error:
ApiInitLocal():ApiInitLocal: START
ApiInitLocal():* * * A P I I N I T * * *
ld.so.1: java: fatal: relocation error: file /opt/rm902/remotemanager/soFile/libACEUser.so: symbol Sd_ApiInit: referenced symbol not found
Killed
I tried setting "LD_LIBRARY_PATH" , but that also didnt work.
Any help would be highly appreciated.
Thanks in advance

Hello all
I am new to JNI and while trying to run my
to run my first program I am receiving an error in
compilation of the 'C' file. For ur clarity my taken
steps are given as follows:
a. First I created 'HelloNative.java'
Then I compiled it and after running created the
the HelloNative.h
b. Then I wrote the HelloNative.c file and when I
compile it using MS VC++ then it gives the
following error:
--------------------Configuration: helloNative -
- Win32 Debug--------------------
Compiling...
helloNative.c
f:\bin\hellonative.c(3) : fatal error C1083: Cannot
open include file: 'jni.h': No such file or directory
Error executing cl.exe.
helloNative.obj - 1 error(s), 0 warning(s)
PLZ HELP ME ON THIS.
So for a quick patch, copy the jni.h file from the include
directory of your java installation files to the include
files that your c complirer has and uses.

Adobe Downloading Adobe Photoshop Elements 13 MultipleLanguages Windows The Akamai Download Manager has encountered an fatal error: File not found.

I am trying to download the trial of PSE 13 which consists of two files. The first downloads ok but on the second I get this message:
Downloading Adobe Photoshop Elements 13 MultipleLanguages Windows
The Akamai Download Manager has encountered an fatal error: File not found.
Same thing happens if I try to download the files individually and also in different browsers. Any ideas?

Me three. I have been trying for hours, and have used three different browsers.
I have just noticed that the URL it is trying to use is looking for ...win32.exe under a directory called win64. That sounds like a stupid typo mistake. I manually modified the URL to this instead (and it downloaded something)...
http://trials3.adobe.com/AdobeProducts/PSE/13/win32/PhotoshopElements_13_LS25_win32.exe
Now I just need to figure out how to install the product manually using the two downloaded files!?!

Error is not getting logged in error file while running dataload maxl

Hello All,
I am running a Maxl to load data in a database which is running fine but noted a weird issue that the errors are not getting logged in error file. Suppose i changed the name of data file then it should give error something like
ERROR - {Error no.} - Unable to open file {filename} which should be logged in error file but my error file is still empty.
I am using the Maxl -
import database {dbname} data from data_file {filename} on error append to "D:/Error/errorfile.err";
Any inputs please...
Thanks

Try to use single quotes and the backslash. It may depend on the operating system and /or the version of essbase used. This is an example from one of my maxls:
on error append to 'D:\Hyperion\logfiles\myload.err';
cheers, chris

Unzip OBIEE 11.1.1.3 win32 ERROR file corrupt

Similar Messages

Maybe you are looking for