UoM conversion error while loading Material Master

Hi,
Our Legacy system is also SAP (lower version) and we're trying to move the data to ECC6.0. We're using MATMAS_MASS_BAPI03 to move Material master records.
All the Alternative UoM to be moved with 'no change'. Everything gets moved except for LBs and FT3s and we get message 'UoM Conversions are inconsistent'.
I entered LBs, for example, online in the new system and found that conversion factors (NUmerator and Denominator) were indeed different.
Legacy LB: Numerator - 4756 and Denominator - 65113
New System LB: Numerator - 2564 and Denominator - 35103
If you have noticed, we will get the same result if you divide Numerator by Denominator.
Note: KG values were same in the both systems without any issue.
What should we do to get it right?
Best Regards,
Ram

Hi,
While loading attributes U have to select the transfer structure of the 0MATERIAL_ATTR then activate it..now proceed if it is already replicated in to BW system... other wise first do that..then go ahead....Similar to Text also...
Regards
Siddhu

Similar Messages

Error while loading material master data

I am loading delta data for material master and its giving me the following error:
"Programs not generated for InfoSource 0MATERIAL_ATTR and source system".
How to resolve this error?
Need ur help urgently.
Thanks

Hi,
While loading attributes U have to select the transfer structure of the 0MATERIAL_ATTR then activate it..now proceed if it is already replicated in to BW system... other wise first do that..then go ahead....Similar to Text also...
Regards
Siddhu

ERROR -WHILE LOADING MATERIAL MASTER FROM A FLAT FILE

HI GUYS ,
I AM TRYING TO CREATE MATERIAL MASTER FROM A FROM FLAT FILE
IAM GETTIGN AN ERROR MESSAGE
'YOU HAVE NOT FULLY MAINTAINED THE DESCRIPTIONS'
REQUIRE HELP ON THIS
THANKS

Hello Nishant
All the inputs that are required to create a material in dialog (MM01) should be mandatory as well if you are going for LSMW or BAPI. Obviously your material requires a description (which will end up in MAKT). If you have this description in your flat file then there are additional (perhaps language-dependent) descriptions required.
You could try to use BAPI_MATERIAL_SAVEDATA in your test environment to find out the minimum input that is required to create a material in R/3.
You may also have a look at thread what are the parameters have to pass to bapi material creation?
Regards
Uwe

Runtime error while creating material master data

hello sir,
i am facing one prolem while creating MATERIAL MASTER DATA.
AFTER GIVING ALL REQUIRED INFORMATION WHEN I AM GOING TO SAVE THE DOCUMENT ITS SHOWING ABAP RUNTIME ERROR.
MESSAGE TYPE: - MDS_KEYMAP.
MESSAGE CLASS: 001.
PLEASE TELL ME WHAT TO DO?
REGARDS..

SIR THANK YOU FOR YOUR REPLY.
I ALREADY DONE THAT DUMP ANALYSIS.
SO PLEASE KINDLY GIVE ME IN DETAILS ABOUT THAT SOLUTION...

Getting Duplicate data Records error while loading the Master data.

Hi All,
We are getting Duplicate data Records error while loading the Profit centre Master data. Master data contains time dependent attributes.
the load is direct update. So i made it red and tried to reloaded from PSA even though it is throwing same error.
I checked in PSA. Showing red which records have same Profit centre.
Could any one give us any suggestions to resolve the issues please.
Thanks & Regards,
Raju

Hi Raju,
I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
Hope this helps you.
Thanks & Regards,
Nithin Reddy.

Error while loading to Master data attribute 0product

Hi experts,
While loading the data from 0material to 0product master data attribute i am getting a error ' 0MATERIAL : Data record 2421 (''300000072 '):Version '300000072 ' is not valid. I request u all to help me to solve this error.
Diagnosis
    Data record 2421 & with the key '300000072 &' is invalid in value
    '300000072 &' of the attribute/characteristic 0MATERIAL &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
Please let me know what could be the problem....
Regards,
Prashanth
Edited by: Prashanth Shetty on Jul 16, 2008 7:42 AM

Hi,
   The issue is due to errorneous record.
Delete the request in Master data and Try the following.
1) Goto PSA --> filter the Status (Red or Green)
Select the Red records and correct the data in which error is throwm.
After correcting the data, save and Right click PSA and give Start update immediately.
2) Load via Infopackage only to PSA and later update from PSA and check.
Any one of the above 2 methods will solve the issue.
Regards,
Balaji V

Error while loading to master data infoobject hierarchy (0RPM_PORT_ITEM_HIERARCHY)

Hi All,
I have an issue while loading the data from psa to master data infoobject.
DTP Error:
When we had extracted the data from ECC to PSA, the values for field "IOBJNM" are not populated for 0RPM_PORT_ITEM_HIERARCHY
Thus it is throwing an error while populating this data to the target.
From where this field will fetch the values?
Why these values are not being populated from ECC?
Will there be any issue from BI side? can anyone help me on this.

Hi Raman,
yes I had extracted data in RSA3
There are no values for the field "object".
Do you have any idea why these values are missing?

'Overlapping Time Intervals' error while loading the Master Data

Guys,
          Need you help with this. I am trying to load the Master Data (attribute) for InfoObject 0FMD_FRSITM using DTP from DataSource 0FMD_FRSITM_ATTR and am getting an error 'Overlapping Time Intervals'.
This is happening due to overlapping Valid From/Valid To date's for the same Financial Statement Item (0FMD_FRSITM) with different Editions.
If I select the option 'Ignore Duplicate Records' while loading the data, it is successful. But not all the records are loads and Editions are missing.
Below is an example of how the data looks like.
FRSITM         Valid To                  Valid From                 Edition
1001             12/31/9999             04/01/2010                2010.1.1
1001             01/31/2010             03/01/2010                2010.1.2
1001             12/31/9999             02/01/2010                2010.1.3
In the above scenario, the Valid To Data for record 1 and record 3 is the same (12/31/9999) and the record 3 is being ignore when I select the option 'Ignore Duplicate Records'.
And also I see that the Edition is not the Key Field.
Any suggestions or ideas? Appreciate your help.
Thanks.

FRSITM Valid To Valid From Edition
1001 12/31/9999 04/01/2010 2010.1.1
1001 01/31/2010 03/01/2010 2010.1.2
1001 12/31/9999 02/01/2010 2010.1.3
1. While selecting ignore duplicate, make sure to-date is not part of symantic key.
2. if system comes across two same records it picks up the latest one.
3. It shall merge the timelines is overlap is found.
4. I hope Edition is time dependent attribute
I believe infoobjet key is FRSITM Valid To.
In your case because first record has more period and may be the latets record system ignore the earlier one with the same time interval.
have a look at Q table and you shall be able to figure out for your self.
Hope it helps
Vikash

Error while loading the master data into hierarchy

Hi,
When i am trying to load the master data into a hierarchy, it is showing me the following error.
"Invalid Entry, hierarchy xxxxxx does not exist".
Can you please tell me what might be the possible cause for this error.
Thanks,
Prateek

Hello
Have you created a hierarchy, I mean go to Transfer structure->Hierarchy structure
->create hierarchy, put a check of whether it is sorted or time dependent etc. after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab.
Hope it will help!!
Regards,
Sandeep

Error while sending Material Master IDOC to Auto ID 2.1

Hello All,
I am using Auto ID 2.1 with SP1 on NW04.
Integration server is XI 3.0 with corresponding XI Content for Auto ID.
The backend is ERP2004.
I am using the config guide for Auto ID 2.1.
After completing the configuration, I tried sending the Material Master IDOC to Auto ID.
IDOC gets created successfully. XI says the message transfer is successfully.
In the log of Auto ID. I am getting the following error while importing the Material Master product:
Product ID AUTOIDAII_MAT has an invalid format
Internal error in /AIN/DM_PROD_COMMIT
Message no. COM_PRODUCT897
The description says that it may be a program error.
Or the program expects some variable to be filled which has not occured.
Any idea what could be the error. Or where should I try looking for to get more detail info.
Do some one knows what should be the patch levels for the different components in all three servers for Auto ID 2.1 SP1.
Thanks for any kind of input.
Regards,
Arundeep Singh

HI Arundeep,
use the following
1) XI 3.0 SP level 12
2) AII 2.1 SP2
3) check in rfid outbound configuration guide for any customising for product to be done in AII
regards,
ashit singh

Errors while loading Product master via HCI

Hello Experts,
We have been facing some issue while loading the product master via the HCI. Here is the reason taken from the log file:
REJECTION_CODE
REJECTION_CODE_NAME
REJECTION_DESCRIPTION
140
Inappropriate use of special character
Special characters are not allowed
We took the same records and loaded through the flat file and they were successful and can be seen in excel ui
We also checked for any inappropriate characters which are not allowed but we couldn't find any.
How should we load the data via the HCI with no errors?
Any help would be highly appreciated.
Thanks
Karan

YS
We are also just getting the same error message as Karan. This issue, for Kraft, just started this week. We looked at the SAP note that you poated and it does not help as it tells us to add code to remove special characters. There are none in the source table in ECC.
The issue is that we have made no changes and this error has started to hit us.
We upgraded to Patch 7 of the HCI Agent this pas weekend. Is that a possible driver of this issue?
-Jeff

Error while creating material master

hi,
I'm getting this error message when I'm creating a material master in a specific plant/sloc. I'm probably guessing its in config. I really need some help here.
"Tables TCURM and T001W inconsistent; notify your system administrator" .
could any one draw some light on this.
thanks regards,
chinta

this is not application server specific problem.
Suggest you to go to [Logistic/MM forum|SAP ERP - Logistics Materials Management (SAP MM);.
regards,
Vincent

Error While Uploading Material Master Through Bdc Call Transaction

Hi Sap Gurus,
I am doing Bdc call Transaction for Material Master Uploading.
But After Entering data for 4-5 screen i got a error_
Field Mara-iprkz doesn,t exit in the screen saplmgmm 4000
Field Mara-prctr doesn,t exit in the screen saplmgmm 4000
Field Mbew-stprs doesn,t exit in the screen saplmgmm 4000
Field Marc-mtvfe doesn,t exit in the screen saplmgmm 4000
Enter Valuation class.
This is my Programme....................................
<removed by moderator>
Thanks in advance.
Arindam
Moderator message: please post only relevant code parts, your post must be less than 5000 characters to preserve formatting.
Edited by: Thomas Zloch on Apr 16, 2011 9:29 PM

Sorry for my obvious answer, but you should ask a more precise question.
Your errors are that you try to enter fields but they don't exist, so it sounds logic.
And the error "Enter Valuation class." means that the field is mandatory. So you must enter it.
Re-record the transaction using SHDB (eventually play with the http://wiki.sdn.sap.com/wiki/display/ABAP/Recordduringplay), run it in A display mode, and correct your program.
Sandra
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'MVKE-SKTOF'
                              'X'.
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'MARC-PRCTR'
                              wa_mara-prctr."'MUMBAI'.
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'MARA-IPRKZ'
                              'D'.

Error while loading 0Plant master data in PSA

Hi,
i am trying to load attributes master data for 0PLANT, but in PSA i get the following error:
<i><b>'Record 1 :Plant CU : No sales organization found; Local currency cannot be checked'</b> .</i>
We are not using SD module and so no sales organization data is maintained have through a couple of posts posted here in SDN,and have applied the correction instructions manually as stated in OSS note : 750322.(As mentioned for case 3). But i still get the same error.

Hi,
The issue is due to errorneous record.
Delete the request in Master data and Try the following.
1) Goto PSA --> filter the Status (Red or Green)
Select the Red records and correct the data in which error is throwm.
After correcting the data, save and Right click PSA and give Start update immediately.
2) Load via Infopackage only to PSA and later update from PSA and check.
Any one of the above 2 methods will solve the issue.
Regards,
Balaji V

Getting the error while loading the master data

Hi
i have tried to delete the master data using right click and delete master data, but still there are data.
Now i am trying to load this master data again then i am getting the message "0 from 50033 records"
and data load got failed with error message "master data/text of 0vendor already deleted "
and due to this i could not able to load my other infoprovider (which have 0 vendor).
can any body help me, it very urgent...
thanks and regards
Anupam

Hi Raju,
I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
Hope this helps you.
Thanks & Regards,
Nithin Reddy.

UoM conversion error while loading Material Master

Similar Messages

Maybe you are looking for